HP 800ps HP Designjet 800ps Printer - User's Guide - Page 140
Enter, Cancel, Align printheads, Advance, calibration, Printhead, Alignment, Printhead Alignment
View all HP 800ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
Introduction Media & Ink The Front Panel Solutions Front Panel Printer Options Other Index Menu Structure Navigating the Menu System Message Descriptions Front Panel Messages (continued) Message Explanation and Action Printheads not aligned Paper too small to align printheads Press ENTER to continue You have replaced one or more printheads but the printer has detected that you do not have wide enough paper loaded for the alignment process. Press the Enter key to load larger paper, or the Cancel key to stop the load process. PRINTHEADS not functional Replace printheads Cancel print Printheads require alignment. Load paper and select Align printheads. Press ENTER to finish Printheads require alignment. Press ENTER to align The printer is attempting to print a job, but finds that there is a problem with the printheads. You may either replace the printheads at this stage or cancel the print. Select the required option and press the Enter key. If you decide to replace them, you will be told which ones are failing or missing. The printer has detected that the printheads need to be aligned. Press the Enter key to continue. Load a sheet or roll of paper, and select Align printheads from the Ink menu. See Printhead Alignment. The printer has detected that the printheads need to be aligned. Press the Enter key to align them. See Printhead Alignment. Problem found during calibration A general problem was found during the Advance Calibration routine. Respond to any other messages that appear on the front panel, indicating ink or paper problems, and then retry the Advance calibration routine. For more Messages, click on the Next Page button