HP 800ps HP Designjet 800ps Printer - User's Guide - Page 143
Create pattern, Either, Enter, Cancel, Troubleshooting, Replace Printheads, Ink System
View all HP 800ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Introduction Media & Ink The Front Panel Solutions Front Panel Printer Options Other Index Menu Structure Navigating the Menu System Message Descriptions Front Panel Messages (continued) Message Explanation and Action Sheet not loaded Load sheet with printed pattern Sheet too long Please check it is not a roll Press ENTER to retry Press CANCEL to abort Troubleshooting finished Resume normal printing If problem persists select Troubleshooting again Press ENTER to continue Troubleshooting requires paper for a diagnostic print. The printer is trying to perform a scan of the calibration pattern, but no sheet was found. Load the sheet that was printed by the Create pattern part of the calibration routine. You have requested the printer to load a sheet of paper, but the sheet appears to be too long. Check that the paper is not a roll. Either: Press the Enter key to try to load the sheet again; Or: Press the Cancel key to stop the process. If the paper is on a roll, follow the instructions in Loading Roll Media. The printer has finished the Troubleshooting routine and will not at this stage perform further cleaning on the printheads because this could damage the other ones. However, according to the evaluation you have given, the printheads require cleaning because there are defects in the Diagnostic Print. Press the Enter key. Then resume your normal printing activities. If the problem recurs, try using the Troubleshooting routine again, or select Replace Printheads from the front panel (in the Ink System menu) to replace the printheads that are faulty. The Troubleshooting utility has found that there is no paper loaded in the printer. Load a roll of paper. For more Messages, click on the Next Page button