HP 800ps HP Designjet 800ps Printer - User's Guide - Page 51
Ink Supply Guidelines, Assembly and Set-up Poster - printhead assembly
View all HP 800ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Introduction Media Choice Media & Ink Solutions Front Panel Printer Options Roll Media Sheet Media Ink System Other Ink Cartridges Index Printheads Ink Supply Guidelines For optimum results from your printer and the ink system, always follow these guidelines when handling HP Ink Supplies: • Always install the ink cartridges and printheads before the expiry date, which is on the packaging. • Install ink cartridges and printheads in their color-coded slots. • Follow the instructions on the front panel during installation. • Avoid unnecessary removal of the ink cartridges and printheads. • When turning off your printer, always use the power-off button on the front panel. The printheads are then parked correctly which prevents them from drying out. • The ink cartridges should never be removed while the printer is printing. They should only be removed when the printer is ready for you to replace them. The front panel will guide you through the removal and installation procedure. See When to Replace HP Ink Supplies. CAUTION: When you first received your printer it was supplied with a set of four setup printheads installed in the printhead carriage. These setup printheads are used for the priming of the tubes in the modular ink delivery system. Do not remove the setup printheads from the carriage without following the procedures in the Assembly and Set-up Poster.