HP 8100n HP LaserJet 8100, 8100 N, 8100 DN Printers - User Guide - Page 131
From the Printing Menu set, CON CUSTOM PAPER=YES
UPC - 088698296417
View all HP 8100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Chapter 2 Printing Tasks 131 X (front edge) 3.9 in. (98 mm) 7.5 in. (191 mm) Y (side edge) If the settings are not available from the software, set the custom paper size from the control panel: 1 From the Printing Menu set CONFIGURE CUSTOM PAPER=YES. 2 From the Printing Menu, select inches or millimeters as the unit of measurement. 3 From the Printing Menu, set the X dimension (the front edge of the paper) as shown in the illustration above. X can be from 3.9 to 11.7 inches (from 98 to 297 mm) for Tray 1. Set the Y dimension (the side edge of the paper) as shown in the illustration above. Y can be from 7.5 to 17.7 inches (from 191 to 450 mm) for Tray 1. Continued on next page. Printing Special Paper
Chapter 2
Printing Tasks
131
Printing Special Paper
If the settings are not available from the software, set the custom paper size
from the control panel:
1
From the Printing Menu set
CONFIGURE CUSTOM PAPER=YES
.
2
From the Printing Menu, select inches or millimeters as the unit of
measurement.
3
From the Printing Menu, set the X dimension (the front edge of the paper)
as shown in the illustration above. X can be from 3.9 to 11.7 inches (from
98 to 297 mm) for Tray 1. Set the Y dimension (the side edge of the paper)
as shown in the illustration above. Y can be from 7.5 to 17.7 inches (from
191 to 450 mm) for Tray 1.
Continued on next page.
X (front edge)
7.5 in. (191 mm)
Y (side edge)
3.9 in. (98 mm)