HP 8100n HP LaserJet 8100, 8100 N, 8100 DN Printers - User Guide - Page 162

Chapter 3 Advanced Printing Tasks 162 2 Print the job. The status indicator on the HP Fast InfraRed Connect lights up, and, after a short delay, the printer status panel displays PROCESSING JOB. If the status indicator does not light up, realign the HP Fast InfraRed Connect with the FIR port on the sending device, resend the print job, and maintain the alignment of all devices. If you have to move the equipment (for example, to add paper), make sure that all devices remain within the range of operation to maintain the connection. If the connection is interrupted before your print job is complete, the HP Fast InfraRed Connect status indicator turns off. You have up to 40 seconds to correct the interruption and continue the job. If the connection is resumed within this time, the status indicator lights up again. Note The connection is permanently broken if the sending port is moved out of operating range or if anything passing between the ports blocks transmission. (This block could be a hand, paper, or even direct sunlight.) Depending on the size of the job, printing with the HP Fast InfraRed Connect may be slower than printing with a cable connected directly to the parallel port. Printing with the Optional HP Fast InfraRed Connect