HP 8100n HP LaserJet 8100, 8100 N, 8100 DN Printers - User Guide - Page 236
Problem Solving, Correcting Output Quality Problems, Printing is Incomplete or Incorrect continued
UPC - 088698296417
View all HP 8100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 236 highlights
Chapter 5 Problem Solving 236 Printing is Incomplete or Incorrect (continued) Situation Garbled pages print, there are overprints, or only a portion of a page prints. The job was not duplexed. Solution z Make sure that your software application is configured for the correct printer. z Replace the printer interface (I/O) cable with a cable you know works to see if the cable is defective. z Your parallel printer cable might be defective. Use a high-quality cable; see page 38 for an HP cable part number. z Set the PERSONALITY item in the Configuration Menu to AUTO (page 375). The printer may have been set to PCL and a PS job was sent to the printer, or vice versa. z Data sent to the printer may be corrupt. Try sending another file to see if it prints. z Turn the printer off. Make sure that the duplexer is properly installed. Turn the printer on. z Make sure that you are using the correct paper size (page 328). z You may need to add more printer memory (page 397). z Make sure that you are following the guidelines for printing on both sides of the paper (see 111). Correcting Output Quality Problems