HP 8100n HP LaserJet 8100, 8100 N, 8100 DN Printers - User Guide - Page 385
I/o Buffer=auto, Buffer Size, I/o Buffer Size, I/o Buffer, I/o Buffer=on
UPC - 088698296417
View all HP 8100n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 385 highlights
Appendix B Control Panel Menus 385 Item Values Explanation I/O BUFFER=AUTO AUTO ON OFF Allocate memory for I/O buffering. AUTO: The printer automatically reserves memory for I/O buffering. Additional configurations are not required and the I/O BUFFER SIZE menu item does not appear. ON: The I/O BUFFER SIZE item appears (see below). Specify the amount of memory to be used for I/O buffering. OFF: I/O buffering is not performed and the I/O BUFFER SIZE item does not appear. When the I/O buffer setting is changed, any downloaded resources (such as fonts or macros) will need to be downloaded again, unless they are stored on an optional hard disk or flash DIMM. For more information, see page 403. I/O BUFFER SIZE= 100K 10K and up This item appears only when I/O BUFFER=ON. Specify the amount of memory for I/O buffering. The maximum amount of memory available for I/O buffering is determined by the amount of memory installed in the printer, the languages installed in the printer, and by other memory allocations that must be made. Press - VALUE + to change settings by increments of 10 (up to 100 KB) or by increments of 100 (above 100 KB). I/O Menu