HP 8510p HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation -
HP 8510p - Compaq Business Notebook Manual
UPC - 883585842872
View all HP 8510p manuals
Add to My Manuals
Save this manual to your list of manuals |
HP 8510p manual content summary:
- HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 1
HP Compaq 8510w Mobile Workstation and HP Compaq 8510p Notebook PC Maintenance and Service Guide - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 2
by its proprietor and used by Hewlett-Packard Company under license. AMD is a registered trademark of Advanced Micro Devices, Inc. Intel and Core are trademarks of Intel Corporation in the U.S. and other countries. Microsoft, Windows and Windows Vista are U.S. registered trademarks of Microsoft - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 3
the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 4
iv Safety warning notice - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 5
...27 Mass storage devices ...28 Miscellaneous parts ...29 Sequential part number listing ...30 4 Removal and replacement procedures Preliminary replacement requirements 37 Tools required ...37 Service considerations ...37 Plastic parts ...37 Cables and connectors 38 Drive handling 38 Grounding - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 6
Component replacement procedures 43 Serial number ...43 Computer feet ...44 Battery ...45 SIM ...46 Display inverter ...47 Hard drive ...49 Bluetooth module ...52 Optical drive ...53 Memory module ...55 Keyboard ...57 WWAN module ...59 Fan ...61 Heat sink ...62 Processor ...64 Graphics card ...65 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 7
102 Hard drive specifications ...103 DVD±RW and CD-RW Double-Layer Combo Drive specifications 104 DVD/CD-RW Combo Drive specifications 105 DVD-ROM Drive ...106 System DMA specifications ...107 System interrupt specifications ...108 System I/O address specifications 109 System memory map - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 8
a recovery in Windows 144 Initiating a recovery from the hard drive recovery partition 144 9 Connector pin assignments Audio-out (headphone) ...145 Audio-in (microphone) ...145 External monitor ...146 RJ-11 (modem) ...147 RJ-45 (network) ...147 Universal Serial Bus ...148 10 Power cord set - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 9
1 Product description Category Product Name Processors Chipset Graphics Panel Description HP Compaq 8510w HP Compaq 8510p Mobile Notebook PC Workstation HP Compaq 8510w Mobile Workstation √ HP Compaq 8510p Notebook PC √ Intel® Core™ 2 Duo processors T7800 2.6-GHz processor 4-MB L2 cache, - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 10
Memory Hard drives Optical drives Description HP Compaq 8510w HP Compaq 8510p Mobile Notebook PC Workstation 15.4-inch WSXGA+ AntiGlare √ √ 15.4-inch WXGA AntiGlare √ √ Support privacy film √ √ Two customer-accessible/upgradable memory √ √ module slots Supports dual channel memory - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 11
Drive ● Blu-Ray DVD-RW Combo Drive ● DVD-ROM Drive HP Compaq 8510w HP Compaq 8510p Mobile Notebook PC Workstation Supports external USB diskette drive only √ √ Supports boot from external USB diskette drive √ √ Supports 3-mode diskette drive √ √ Integrated microphone √ √ HD audio - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 12
Description HP Compaq 8510w HP Compaq 8510p Mobile Notebook PC Workstation Support for the following WWAN formats: √ √ ● Evolution-data optimized (EVDO) ● High-speed downlink packet access (HSDPA) Integrated personal area network (PAN) options by way of Bluetooth® module: Support for - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 13
32/64 √ √ Windows Vista Home 32 √ √ Windows XP Professional √ √ DRDVD XP √ √ DRDVD Vista √ √ Supported: Windows Vista Enterprise √ √ Windows® 2000 √ √ Certified: Linux √ √ End-user replaceable parts: AC adapter √ √ Battery (system) √ √ Hard drive √ √ Memory module - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 14
(3) Ambient light sensor When activated, the sensor automatically adjusts the display brightness based on the surrounding lighting conditions. *The antennae are not visible from the outside or region. These notices are located in Help and Support. 6 Chapter 2 External component identification - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 15
Moves the pointer and selects or activates items on the screen. (4) Left TouchPad button Functions like the left button on device preferences as follows: ● In Windows Vista, select Start > Control Panel > Hardware and Sound > Mouse. ● In Windows XP, select Start > Control Panel > Printers - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 16
switches, and fingerprint reader Item (1) Component Power button (2) Internal power settings, follow these steps: ● In Windows Vista, select Start > Control Panel > System and Maintenance > Power Options. ● In Windows XP, select Start > Control Panel > System and Maintenance > Power speaker sound. - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 17
scroll zone (8) Internal microphone (9) HP Fingerprint Sensor (finger print reader) Function Adjusts speaker volume. Slide your finger to the left to decrease volume and to the right to increase volume. Records sound. Allows a fingerprint logon to Windows, instead of a password logon. Keys - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 18
(WLAN) device, the HP Broadband Wireless Module, and/or a Bluetooth® device, is on. ● Off: All wireless devices are off. ● On: The computer is on. ● Blinking: The computer is in the Sleep state (Windows Vista) or in Standby (Windows XP). ● Blinking rapidly: An AC adapter with a higher power rating - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 19
Volume up light Blinking: The volume scroll zone is being used to increase speaker volume. *The 2 power lights display the same information. The light on the power button is visible only when the computer is open. The power light on the front of the computer is visible whether the computer is open - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 20
components Item (1) Component Wireless light (2) Power light (3) Battery light (4) Drive light (5) Speakers (6) Display release latch Function ● On: An integrated wireless device, such as a WLAN device, the HP Broadband Wireless Module, and/or a Bluetooth device, is turned on. ● Off - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 21
. Connects an optional video or audio device, such as a highdefinition television, or any compatible digital or audio component. Connect optional USB devices. Supports the following optional digital card formats: MultiMedia Card (MMC) and Secure Digital (SD) Memory Card. Supports optional Type I or - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 22
Rear components Item (1) (2) Component Power connector External monitor port Function Connects an AC adapter. Connects an external VGA monitor or projector. 14 Chapter 2 External component identification - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 23
in (microphone) jack (3) USB ports (2) (select models only) (4) Optical drive (5) RJ-11 (modem) jack Function Produces sound when connected to optional powered stereo speakers, headphones, ear buds, a headset, or television audio. Connects an optional computer headset microphone, stereo array - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 24
Component Hard drive bay Accessory battery connector Battery release latches (2) Battery bay SIM slot (select models only) (6) Docking connector (7) Vent (8) Memory module compartment Function Holds the hard drive. Connects an optional accessory battery. Release the battery from the battery - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 25
3 Illustrated parts catalog Serial number location When ordering parts or requesting information, provide the computer serial number and model number located on the bottom of the computer. Serial number location 17 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 26
Computer major components 18 Chapter 3 Illustrated parts catalog - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 27
Item (1) (2) (3) Description Spare part number Display assemblies for use with computer models equipped with transceivers) Display hinges 452213-001 Display inverter 452214-001 Switch cover (includes LED board and cable) 452226-001 Keyboards with pointing stick (include pointing stick - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 28
For use in the United Kingdom For use in the United States Keyboards without pointing stick For use in Belgium For use in Brazil For For use in Norway For use in Portugal 20 Chapter 3 Illustrated parts catalog Spare part number 452229-B31 452229-091 452229-131 452229-251 452229-171 452229-231 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 29
-001 Plastics Kit (see Plastics Kit on page 26 for more Plastics Kit spare part information): 452221-001 PC Card slot bezel Memory module compartment cover Hard drive cover Base enclosure rubber screw covers (2, not illustrated) Computer feet (10, not illustrated) Computer major components - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 30
Item (10) (11) (12) Description Spare part number System board frame 455428-001 WWAN modules HP ev2210 1xEVDO-A WWAN module 451131-001 HP hs2300 HSDPA WWAN module 448673-002 WLAN modules Intel 802.11a/b/g/n WLAN modules: ● For use in Antigua and Barbuda, Argentina, Aruba, the Bahamas, - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 31
Item (13) Description Spare part number Intel 802.11a/b/g WLAN modules: ● For use in Antigua & Barbuda, Argentina, Aruba, the Bahamas, Barbados, Bermuda, 441082-001 Brunei, Canada, the Cayman Islands, Chile, Colombia, - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 32
more Cable Kit spare part number information. Graphics cards (include replacement thermal material) ATI M76M graphics card with 256 MB of graphics subsystem memory (supports Hypermemory) 454247-001 nVidia G84GLM graphics card with 256 MB of graphics subsystem memory (supports Turbo 455077-001 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 33
with LightScribe DVD±RW and CD-RW Double-Layer Combo Drive Blu-Ray DVD-RW Drive DVD/CD-RW Combo Drive DVD-ROM Drive Cable Kit (not illustrated; see Cable Kit on page 27 for more Cable Kit spare part number information) Spare part number 450066-001 452195-001 443903-001 443904-001 452220-001 443901 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 34
Description Plastics Kit: (1) Memory module compartment cover (includes one captive screw, secured by a C-clip) (2) Hard drive cover (includes 2 captive screws, secured by C-clips) (3) Base enclosure screw covers (2) (4) PC Card slot bezel (5) Computer feet (10) Spare part number 452221-001 26 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 35
Cable Kit Item Description Cable Kit: (1) Bluetooth module cable (2) RJ-11 connector cable (3) Microphone (4) Modem module cable Spare part number 452198-001 Cable Kit 27 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 36
Super Multi Double-Layer Combo Drive Blu-Ray DVD-RW Drive DVD/CD-RW Combo Drive DVD-ROM Drive (2) Hard drives (include bracket ) 160-GB, 7200-rpm 160-GB, 5400-rpm 120-GB, 7200-rpm 120-GB, 5400-rpm 100-GB, 7200-rpm 80-GB, 7200-rpm 80-GB, 5400-rpm Spare part number 443903-001 443904-001 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 37
Miscellaneous parts Description AC adapters Slim 90-W AC adapter Smart Adapter 90-W AC adapter External MultiBay II External MultiBay II power cable and stand HP Extended Life Battery MultiBay 8X DVD-ROM Drive MultiBay 24X DVD/CD-RW Combo Drive Nylon carrying case USB 1.1 diskette drive Power cords: - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 38
246959-BB1 Power cord (3-wire) for use in Israel 391173-001 Slim AC adapter, PFC 90-W 398393-002 Broadcom Bluetooth module for use in all countries and regions except Japan and Asia Pacific countries and regions NOTE: The Bluetooth module spare part kits do not include a Bluetooth module cable - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 39
Spare part number 441075-291 441082-001 441082-002 441082-003 441082-291 441086-001 441086-002 441086-003 441086-291 , East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Sequential part number listing 31 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 40
Cable Kit spare part number information. DVD/CD-RW Combo Drive DVD-ROM Drive DVD±RW and CD-RW Double-Layer Combo Drive DVD±RW and CD-RW Double-Layer Combo Drive with LightScribe 80-GB, 5400-rpm hard drive (includes hard drive bracket) 120-GB, 5400-rpm hard drive (includes hard drive bracket) 160-GB - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 41
with HP Compaq 8510w computer models (includes fingerprint reader board and cable) Speaker assembly Switch cover (includes LED board and cable) Heat sink (includes a heat sink clip and replacement thermal material) Keyboard without pointing stick for use in the United States Sequential part number - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 42
Spare part number Description 452228-031 Keyboard without pointing stick for use in the United Kingdom (includes keyboard cable) 452228-041 Keyboard without pointing stick for use in Germany (includes keyboard cable) 452228-051 Keyboard without pointing stick for use in France (includes keyboard - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 43
card with 256 MB of graphics subsystem memory (supports Turbo Cache; includes replacement thermal material) 455078-001 Display bezel for use with computer models equipped with WLAN and WWAN capability 455079-001 120-GB, 7200-rpm hard drive (includes hard drive bracket) 455426-001 USB/audio - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 44
Spare part number 455427-001 455428-001 455893-001 455954-001 455969-001 457612-001 Description Fingerprint reader board (includes fingerprint reader board cable) System board frame PC Card assembly 160-GB, 7200-rpm hard drive (includes hard drive bracket) TouchPad with 3 TouchPad buttons and 3 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 45
removal and replacement procedures: ● Flat-bladed screwdriver ● Magnetic screwdriver ● Hex metric 5.0-mm nut driver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdriver Service considerations The following sections include some of the considerations that you must keep in mind during disassembly - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 46
sure that cables are routed in such a way that they cannot be caught or snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily. Drive handling CAUTION: Drives are fragile components that must be handled with care. To prevent damage to the computer - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 47
power to alter device work perfectly throughout a normal cycle. Or the device may function normally for a while, then degrade in the internal layers, reducing its life expectancy. CAUTION: To prevent damage to the computer when you are removing 7,000 V 5,000 V Preliminary replacement requirements 39 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 48
, parts, and assemblies by the case or PCM laminate. Handle these items only at static-free workstations. ● Avoid contact with pins, leads, or circuitry. ● Turn off power and input signals before inserting or removing connectors or test equipment. 40 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 49
foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible workstations with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service replacement requirements 41 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 50
the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the real - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 51
must be removed, replaced, or loosened when servicing the computer. Make special note of each screw and screw lock size and location during removal and replacement. Serial number Report the computer serial number to HP when requesting information or ordering spare parts. The serial number is located - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 52
Computer feet The computer feet are adhesive-backed rubber pads. The feet are included in the Plastics Kit, spare part number 452221-001. There are 10 rubber feet that attach to the base enclosure in the locations illustrated below. 44 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 53
it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Remove the battery: 1. Turn the computer upside - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 54
the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). Remove the SIM - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 55
system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). Remove the display inverter - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 56
as far as the display panel cable and backlight cable allow. 9. Disconnect the backlight cable (3) and the display panel cable (4) from the display inverter. 10. Remove the display inverter. Reverse this procedure to install the display inverter. 48 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 57
operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). Remove the hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 58
spare part number 452221-001 4. Loosen the Phillips PM2.5×11.0 captive screw (1) that secures the hard drive to the computer. 5. Grasp the Mylar tab (2) on the hard drive and slide the hard drive (3) to the left to disconnect it from the system board. 6. Remove the hard drive (4) from the hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 59
8. Lift the bracket (2) straight up to remove it from the hard drive. Reverse this procedure to reassemble and install the hard drive. Component replacement procedures 51 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 60
system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 61
system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). Remove the optical drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 62
6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive. 7. Remove the optical drive bracket (2). Reverse this procedure to install an optical drive. 54 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 63
system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). Remove the memory module - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 64
5. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the memory module slot. Reverse this procedure to install a memory module. 56 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 65
For use in: Spare part number For use in: Keyboards with pointing stick (includes pointing stick cable): Belgium 455529-A41 The Netherlands and Europe Brazil 455529-201 -071 455528-B71 455528-111 455528-AB1 455528-281 455528-141 455528-031 455528-001 Component replacement procedures 57 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 66
system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). Remove the keyboard keyboard - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 67
cable (4) from the system board. 9. Remove the keyboard. Reverse this procedure to install the keyboard. WWAN module CAUTION: The WWAN module and the WLAN module are not interchangeable. Description HP ev2210 1xEVDO-A WWAN module HP hs2300 HSDPA WWAN module Spare part number 451131-001 448673 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 68
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the SIM (see SIM on page 46). 6. Remove the keyboard - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 69
first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the keyboard (see Keyboard on page 57). Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the two Phillips - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 70
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the keyboard (see Keyboard on page 57). 6. Remove the fan - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 71
be thoroughly cleaned from the surfaces of the heat sink (1) and (3), the processor (2), and graphics system component (4) each time the heat sink is removed. Thermal material is included with all heat sink and processor spare part kits. Reverse this procedure to install the heat sink. Component - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 72
from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Keyboard (see Keyboard on page 57) b. Fan (see Fan on page 61) c. Heat sink (see Heat - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 73
slot when you install the processor. Reverse this procedure to install the processor. Graphics card NOTE: All graphics card spare part kits include replacement thermal material. Description Spare part number ATI M76M graphics card with 256 MB of graphics subsystem memory (supports Hypermemory - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 74
4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Keyboard (see Keyboard on page 57) b. Fan (see Fan on page 61) c. Heat sink (see Heat sink on page 62) Remove the graphics card: 1. Remove the two Phillips PM2.0×3.0 screws (1) that secure the graphics card to the - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 75
operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the keyboard - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 76
5. Release the TouchPad (2) by sliding it toward the display. 6. Disconnect the TouchPad cable (1) from the system board. 7. Remove the TouchPad (2). Reverse this procedure to install the TouchPad. 68 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 77
CAUTION: The WLAN module and the WWAN module are not interchangeable. Description Spare part number Intel 802.11a/b/g/n WLAN modules: ● For use in Antigua and Barbuda, Argentina Peru, Saudi Arabia, Taiwan, the United States, Uruguay, Venezuela, and Vietnam Component replacement procedures 69 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 78
down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 70 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 79
and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. Component replacement procedures 71 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 80
4. Remove the battery (see Battery on page 45). 5. Remove the keyboard (see Keyboard on page 57). Remove the switch cover: 1. Turn the computer upside down, with the front toward you. 2. Remove the Torx T8M2 . 6. Lift the switch cover (2) up and back. 72 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 81
7. Release the ZIF connector (1) to which the LED board cable is attached, and disconnect the LED board cable (2) from the connector. 8. Remove the switch cover. Reverse this procedure to install switch cover. Component replacement procedures 73 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 82
operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the memory - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 83
shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 84
: (1) Two Torx T8M2.5×9.0 screws (2) One Phillips PM2.5×4.0 screw (3) Two Phillips PM2.0×2.0 screws 4. Position the computer with the rear panel toward you. 5. Remove the four Torx T8M2.5×9.0 screws (1) that secure the display assembly to the computer. 76 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 85
6. Lift the display assembly (2) straight up and remove it. CAUTION: When installing the display assembly, be sure that the installed in a white, yellow, red, black sequence. Failure to follow these routing instructions can result in degradation of the computer's WLAN and WWAN performance. Component - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 86
display inverter replacement instructions. 8. Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display bezel until the bezel disengages from the display enclosure. 9. Remove the display bezel (3). The display bezel is available using spare part numbers - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 87
PM2.0×4.0 screws (1) that secure each display hinge to the display panel. 13. Remove the display hinges (2). The left and right display hinges are available using spare part number 452213-001. Reverse this procedure to reassemble and install the display assembly. Component replacement procedures 79 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 88
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 89
cover to the base enclosure. 4. Turn the computer right-side up, with the front toward you. 5. Disconnect the fingerprint reader board cable (1) from the system board. 6. Remove the two Torx an angle. 8. Disconnect the microphone cable (2) from the system board. Component replacement procedures 81 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 90
the clips (1) built into the top cover. 12. Remove the microphone receiver (2) from the clip (3) built into the top cover. Reverse this procedure to install the top cover. Speaker assembly Description Speaker assembly 82 Chapter 4 Removal and replacement procedures Spare part number 452225-001 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 91
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 92
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 93
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 94
(see Graphics card on page 65) ● PC Card assembly (see PC Card assembly on page 89) Remove the system board: 1. Disconnect the following cables from the system board: (1) RJ-11 connector cable (2) USB board cable (3) Audio board cable (4) Bluetooth module cable 2. Position the base enclosure with - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 95
Phillips PM2.5×7.0 screws (2) that secure the system board frame to the base enclosure. 4. Lift the system board (3) and frame straight up and remove them from the base enclosure. NOTE: When removing the system board and frame, be sure that the USB/audio board cables (4) route cleanly through the - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 96
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 97
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 98
: 1. Turn the system board upside down, with the front toward you. 2. Remove the two Phillips PM2.0×3.0 screws that secure the PC Card assembly to the system board. 3. Detach the slots on the PC Card assembly from the tabs on the PC Card connector (1). 90 Chapter 4 Removal and replacement procedures - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 99
devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 45). 5. Remove the following components: a. Hard drive (see Hard drive - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 100
assembly (see Speaker assembly on page 82) k. Modem module (see Modem module on page 84) l. System board (see System board and system board frame on page 85) Remove the USB/audio board: 1. Remove the two Phillips PM2.5×4.0 screws (1) that secure the USB/audio board to the base enclosure. 2. Lift - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 101
, ROM-based utility that can be used even when the operating system is not working or will not load. NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer. NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 102
System Configuration menus. 1. Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen. Because Computer Setup is not Windows-based, it does not support instructions on the screen - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 103
do this ● View identification information for the computer and the batteries in the system. ● View specification information for the processor, cache and memory size, system ROM, video revision, and keyboard controller version. Replace the configuration settings in Computer Setup with the original - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 104
any computer hard drive and on optional MultiBay hard drives. ● Change a DriveLock user password or master password. NOTE: DriveLock settings are accessible only when you enter Computer Setup by turning on (not restarting) the computer. Enable/disable support for smart card and Java™ Card power-on - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 105
support allows the following: ◦ Use of a USB keyboard, mouse, and hub in Computer Setup even when a Windows operating system is not running. ◦ Startup from bootable USB devices, including a hard drive, diskette drive, or optical drive connected by a USB port to the computer or to an optional docking - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 106
port also disables MultiBay II devices and ExpressCard devices on the advanced port replicator. ● Enable/disable the 1394 port. ● Enable/disable the cardbus slot. ● Enable/disable the ExpressCard slot. ● Enable/disable the infrared port. ● Enable/disable the optical disk drive. ● Enable/disable the - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 107
cm Weight (equipped with optical drive, 8-cell battery, one 512- 2.77 kg MB memory module, pointing stick, and TouchPad) Input power 14. -20°C to 60°C 41°F to 95°F -4°F to 140°F Operating Nonoperating Maximum altitude (unpressurized) 10% to 90% 5% to 95% Operating Nonoperating Shock Operating - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 108
within this range of temperatures. 15.4.-inch, WUXGA display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 20.7 cm 33.1 cm 39 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 109
15.4-inch, WSXGA+ display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 20.7 cm 33.1 cm 39.1 cm Up to 16.8 million 200:1 (typical - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 110
15.4-inch, WXGA display specifications Dimensions Height Width Diagonal Number of colors Contrast ratio Brightness Pixel resolution Pitch Format Configuration Backlight Character display Total power consumption Viewing angle Metric U.S. 20.7 cm 33.1 cm 39.1 cm Up to 16.8 million 200:1 (typical) - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 111
to 55°C (41°F to 131°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. Hard drive specifications 103 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 112
DVD±RW and CD-RW Double-Layer Combo Drive specifications Applicable disc Center hole diameter Disc diameter Standard disc Mini disc Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate 24X CD-ROM 8X DVD-ROM 24X CD-R 16X CD-RW 8X DVD+R 4X DVD+ - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 113
DVD/CD-RW Combo Drive specifications Applicable disc Center hole diameter Disc diameter Standard disc Mini disc Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate 24X CD-ROM 8X DVD 24X CD-R 24X CD-RW Transfer mode Startup time Stop time - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 114
DVD-ROM Drive Applicable disc Center hole diameter Disc diameter Standard disc Mini disc Disc thickness Track pitch Access time Random Full stroke Audio output level Cache buffer Data transfer rate CD-R (24X) CD-RW ( /s at 1X DVD rate) 16.6 MB/s < 10 seconds < 3 seconds 106 Chapter 6 Specifications - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 115
DMA System function DMA0 Not applicable DMA1* Not applicable DMA2* Not applicable DMA3 Not applicable DMA4 Direct memory access controller DMA5* Available for PC Card DMA6 Not assigned DMA7 Not assigned *PC Card controller can use DMA 1, 2, or 5. System DMA specifications 107 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 116
82801DB/DBM USB2 Enhanced Host Controller-24CD COM1 Conexant AC-Link Audio Intel 82801DB/DBM SMBus Controller-24C3 Data Fax Modem with SmartCP Diskette drive Parallel port System CMOS/real-time clock IRQ9* IRQ10* Microsoft ACPI-compliant system Intel USB UHCI controller-24C2 Intel 82852/82855 GM - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 117
for CPU Counter/timer registers Unused Keyboard controller Port B Unused Keyboard controller Unused NMI enable/RTC Unused DMA page registers Unused Port A Unused Interrupt controller no. 2 System Function (shipping configuration) Unused DMA controller no. 2 Unused Coprocessor busy clear/reset Unused - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 118
) Entertainment audio Unused Unused Unused Unused Unused Unused Reserved serial port Unused Infrared port Unused Unused Secondary diskette drive controller Parallel port (LPT1/default) Unused FM synthesizer-OPL3 Unused VGA Reserved (parallel port/no EPP support) VGA PC Card controller in CPU Unused - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 119
04800000-07FFFFFF 04800000-07FFFFFF 08000000-080FFFFF 08200000-FFFEFFFF FFFF0000-FFFFFFFF System function Base memory Video memory Video BIOS Unused System BIOS Extended memory Super extended memory Unused Video memory (direct access) Unused System BIOS System memory map specifications 111 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 120
7 Screw listing This section provides specification and reference information for the screws and screw locks used in the computer. All screws listed in this section are available in the Screw Kit, spare part number 452222-001. 112 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 121
3 Length 5.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: (1) Two screws that secure the hard drive cover to the computer (screws are captured on the cover by C-clips) (2) One screw that secures the memory module compartment cover to the computer (screw is captured on the cover by a C-clip - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 122
Phillips PM2.0×11.0 captive screw Color Silver Quantity 1 Length 11.0 mm Thread 2.0 mm Head diameter 5.0 mm Where used: One screw that secures the hard drive to the computer 114 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 123
Phillips PM3.0×4.0 screw Color Silver Quantity 4 Length 4.0 mm Thread 3.0 mm Head diameter 5.0 mm Where used: 4 screws that secure the hard drive bracket to the hard drive Phillips PM3.0×4.0 screw 115 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 124
Torx T8M2.5×9.0 screw Color Black Quantity 19 Length 9.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: (1) One screw that secures the optical drive to the computer (2) One screw that secures the TouchPad to the computer (3) One screw that secures the switch cover to the computer 116 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 125
Where used: 2 screws that secure the display assembly to the computer Where used: 4 screws that secure the display assembly to the computer Where used: 10 screws that secure the top cover to the base enclosure Torx T8M2.5×9.0 screw 117 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 126
Silver Phillips PM2.0×3.0 screw Color Silver Quantity 10 Length 3.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 2 screws that secure the optical drive bracket to the optical drive Where used: 6 screws that secure the heat sink to the system board 118 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 127
Where used: 2 screws that secure the graphics card to the system board Silver Phillips PM2.0×3.0 screw 119 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 128
Phillips PM2.5×9.0 captive screw Color Black Quantity 2 Length 9.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: 2 captive screws that secure the keyboard to the computer 120 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 129
Phillips PM2.0×6.0 screw Color Silver Quantity 2 Length 6.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 2 screws that secure the fan to the base enclosure Phillips PM2.0×6.0 screw 121 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 130
Phillips PM2.5×4.0 screw Color Black Quantity 10 Length 4.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: (1) Two screws that secure the WWAN module to the computer (2) Two screws that secure the WLAN module to the computer 122 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 131
that secures the display assembly to the computer Where used: 3 screws that secure the speaker assembly to the base enclosure Where used: 2 screws that secure the modem module to the system board Phillips PM2.0×2.0 screw Color Black Quantity 5 Length 2.0 mm Thread 2.0 mm Head diameter 4.5 mm - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 132
Where used: 3 screws that secure the switch cover to the computer Where used: 2 screws that secure the display assembly to the computer Torx T8M2.5×6.0 screw Color Black Quantity 10 Length 6.0 mm Thread 2.5 mm Heat width 5.0 mm 124 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 133
Where used: 4 screws that secure the display bezel top edge to the display assembly Where used: (1) Two screws that secure the display inverter to the display enclosure (2) Four screws that secure the display panel to the display enclosure Torx T8M2.5×6.0 screw 125 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 134
Torx T8M2.5×7.0 screw Color Silver Quantity 2 Length 7.0 mm Thread 2.5mm Head diameter 5.0 mm Where used: 2 screws that secure the display bezel bottom edge to the display enclosure 126 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 135
Phillips PM2.0×4.0 screw Color Silver Quantity 8 Length 4.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 8 screws that secure the display hinges to the display panel Phillips PM2.0×4.0 screw 127 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 136
Black Phillips PM2.5×7.0 screw Color Black Quantity 6 Length 7.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: 2 screws that secure the top cover to the base enclosure Where used: 4 screws that secure the system board frame to the base enclosure 128 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 137
Phillips PM2.5×3.0 screw Color Silver Quantity 4 Length 3.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: 4 screws that secure the top cover to the base enclosure Phillips PM2.5×3.0 screw 129 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 138
Silver Phillips PM2.5×7.0 screw Color Silver Quantity 5 Length 7.0 mm Thread 2.5 mm Head diameter 5.0 mm Where used: 4 screws that secure the system board frame to the base enclosure Where used: One screw that secures the system board to the system board frame 130 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 139
Hex Metric HM5.0×10.0 screw lock Color Silver Quantity 2 Length 10.0 mm Thread 3.0 mm Head diameter 5.0 mm Where used: 2 screw locks that secure the system board to the system board frame Hex Metric HM5.0×10.0 screw lock 131 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 140
Black Phillips PM2.0×3.0 screw Color Black Quantity 4 Length 3.0 mm Thread 2.0 mm Head diameter 4.5 mm Where used: 2 screws that secure the PC Card assembly to the system board Where used: 2 screws that secure the USB/audio board to the base enclosure 132 Chapter 7 Screw listing - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 141
Follow the on-screen instructions. Backing up your information NOTE: You can only recover files that you have previously backed up. HP recommends that you use HP Backup & Recovery Manager to create an entire drive backup as soon as you set up your computer. Backup and recovery in Windows Vista 133 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 142
be copied to a CD or to a DVD using HP Backup & Recovery Manager. Backing up specific files or folders You can back up specific files or folders to the recovery partition on the hard drive, to an optional external hard drive, or to optical discs (CDs or DVDs). NOTE: This process will take several - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 143
and folders, and then click Next. 5. Follow the on-screen instructions. Backing up the entire hard drive When you perform a complete backup of the hard drive, you are saving the full factory image, including the Windows® operating system, software, and all personal files and folders. NOTE: A copy - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 144
, or monthly) or at specific events, such as at system restart or when you dock to an optional docking station (select models only). To schedule backups: 1. Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler. 2. Follow the on-screen instructions. Performing a recovery NOTE: You - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 145
recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Performing a recovery from the hard drive There are 2 ways to initiate a recovery from the hard drive: ● From within Windows ● From the recovery partition Backup and recovery in Windows Vista 137 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 146
the on-screen instructions. Initiating a recovery from the hard drive recovery partition To initiate a recovery from the hard drive recovery partition, follow these steps: 1. Back up all personal files. 2. Restart the computer, and then press f11 before the Windows operating system loads. 3. Click - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 147
to recover the system (Highly recommended), and then click Next. 4. Follow the on-screen instructions. Backing up your information NOTE: You can only recover files that you have previously backed up. HP recommends that you use HP Backup and Recovery Manager to create an entire drive backup as soon - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 148
be copied to a CD or to a DVD using HP Backup and Recovery Manager. Backing up specific files or folders You can back up specific files or folders to the recovery partition on the hard drive, to an optional external hard drive, or to optical discs (CDs or DVDs). NOTE: This process will take several - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 149
Programs > HP Backup & Recovery > HP Backup and Recovery Manager. 2. Click Next. 3. Click Back up to protect system settings and important data files, and then click Next. 4. Click Back up entire hard drive, and then click Next. 5. Follow the on-screen instructions. Backup and recovery in Windows XP - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 150
, or monthly) or at specific events, such as at system restart or when you dock to an optional docking station (select models only). To schedule backups: 1. Select Start > All Programs > HP Backup & Recovery > HP Backup Scheduler. 2. Follow the on-screen instructions. Performing a recovery NOTE: You - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 151
. 2. Insert the first recovery disc into the optical drive and restart the computer. 3. Follow the on-screen instructions. Performing a recovery from the hard drive There are 2 ways to initiate a recovery from the hard drive: ● From within Windows ● From the recovery partition Backup and recovery in - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 152
> HP Backup & Recovery > HP Backup and Recovery Manager. 3. Click Next. 4. Click Recover important files or the entire system, and then click Next. 5. Follow the on-screen instructions. Initiating a recovery from the hard drive recovery partition To initiate a recovery from the hard drive recovery - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 153
9 Connector pin assignments Audio-out (headphone) Pin Signal 1 Audio out, left channel 2 Audio out, right channel 3 Ground Audio-in (microphone) Pin Signal 1 Audio signal in 2 Audio signal in 3 Ground Audio-out (headphone) 145 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 154
External monitor Pin Signal 1 Red analog 2 Green analog 3 Blue analog 4 Not connected 5 Ground 6 Ground analog 7 Ground analog 8 Ground analog 9 +5 VDC 10 Ground 11 Monitor detect 12 DDC 2B data 13 Horizontal sync 14 Vertical sync 15 DDC 2B clock 146 Chapter 9 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 155
RJ-11 (modem) Pin 1 2 3 4 5 6 RJ-45 (network) Signal Unused Tip Ring Unused Unused Unused Pin Signal 1 Transmit + 2 Transmit - 3 Receive + 4 Unused 5 Unused 6 Receive - 7 Unused 8 Unused RJ-11 (modem) 147 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 156
Universal Serial Bus Pin Signal 1 +5 VDC 2 Data - 3 Data + 4 Ground 148 Chapter 9 Connector pin assignments - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 157
cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or 250 V AC, as required by the power system of each country or region. ● The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13 connector for - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 158
Requirements for specific countries and regions Country/region Accredited agency Applicable note number Australia EANSW 1 Austria OVE 1 Belgium CEBC 1 Canada CSA 2 Denmark DEMKO 1 Finland FIMKO 1 France UTE 1 Germany VDE 1 Italy IMQ 1 Japan METI 3 Korea EK 4 The - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 159
your area for computer battery disposal. Display WARNING! The backlight contains mercury. Exercise caution when removing and handling the the liquid crystal display (LCD) panel (2). NOTE: The procedures provided in this appendix are general disassembly instructions. Specific details, such as screw - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 160
Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly (2) of the display bezel until the bezel disengages from the display assembly. 3. Remove the display bezel (3). 152 Chapter 11 Recycling - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 161
4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Turn the display panel assembly upside - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 162
display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Turn the display panel right-side up. 154 Chapter 11 Recycling - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 163
in the display panel. 16. Turn the display panel upside down. WARNING! The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging this component and causing exposure to the mercury. 17. Remove the backlight frame from the display panel. Display 155 - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 164
panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD panel to the display rear panel. 23. Remove the LCD panel. 24. Recycle the - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 165
hard drive 135, 141 modifications made to the system 136, 142 scheduling 136, 142 base enclosure screw cover, illustrated 26 base enclosure, spare part number 24, 33 battery location 16 removal 45 spare part number 25, 32, 45 battery bay 16 battery latches 16 battery light 10, 12 Bluetooth module - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 166
hinge removal 79 spare part number 19, 33, 79 display inverter removal 47 spare part number 19, 47 display panel product description 1 removal 78 display release latch 12 display specifications 100, 101, 102 display switch 8 docking connector 16 docking support, product description 4 drive light - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 167
drive 10, 12 info center 10 num lock 11 power 10, 12 Presentation 10 volume down 11 volume mute 11 volume up 11 wireless 10, 12 M mass storage devices, spare part numbers 28 Media Card Reader 13 memory check 96 memory map specifications 111 memory module product description 2 removal 55 spare part - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 168
part numbers 23, 32, 36, 64 product description audio 3 chipset 1 diskette drive 3 display panel 1 docking support 4 Ethernet 3 external media cards 4 graphics 1 hard drives 2 keyboard 4 memory module 2 microphone 3 modem module 3 operating system 5 optical drives 2 pointing devices 4 ports 4 power - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 169
up light 11 W Windows applications key 9 Windows logo key 9 wireless antennae, disconnecting 60, 71 wireless button 8 wireless light 10, 12 wireless, product description 3 WLAN antennae, locations 6 WLAN module removal 69 spare part numbers 22, 30, 32, 69 workstation guidelines 40 WWAN antennae - HP 8510p | HP Compaq 8510p Notebook PC and HP Compaq 8510w Mobile Workstation - - Page 170
HP Compaq 8510w Mobile Workstation and HP
Compaq 8510p Notebook PC
Maintenance and Service Guide