HP 8550 Service Manual - Page 57
Timer settings, Table 18., Description, Remarks
View all HP 8550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Timer settings Table 18. Timer settings Name Description Remarks Auto clear time Auto save power time Shift to low power time Auto power-off time Automatically returns the touch-panel display to standard mode if no operation takes place for a set time after the end of key operation. Set the time to between zero and nine minutes in one-minute increments. Automatically puts the copy module in save power mode if no operation takes place for a set time after the end of copying or key operation. Set the time to one, two, five, 10, 20, or 30 minutes, or to one to eight hours in one-hour increments. Automatically puts the copy module into low-power mode if no operation takes places for a set time after the end of copying or key operation. Set the time to 30 minutes or to one to eight hours in one-hour increments. Automatically turns off the copy module if no operation takes place for a set time after the end of copying or key operation. Turn the setting off or set the time to one to 24 hours in onehour increments. Factory setting: 2 minutes Factory setting: 30 minutes Factory setting: one hour In low power mode, the fusing assembly is deprived of power in specific intervals. Factory setting: two hours The setting is changed to "off" at installation. EN Copy module functionality 55