HP 9040n HP LaserJet 9040/9050 - Getting Started Guide - Page 13
Step 4. Remove internal packaging - fuser
UPC - 829160954967
View all HP 9040n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
English Step 4. Remove internal packaging CAUTION The printer contains orange shipping tape and internal packaging to prevent damage during shipping. You must remove all shipping materials and internal packaging in order for the printer to function correctly. To remove internal packaging 1 Remove all orange packing material from the exterior of the printer and remove any cardboard or styrofoam material that is not orange. 2 Remove all orange packing material from the standard output bin and the protective film from the control panel display. 3 Open the left door and pull straight back on the shipping tape to remove the two fuser shipping locks (as shown by the diagram on the printer). Make sure that the fuser levers are in the lock position. Note 4 Open the trays, remove any orange packing material, and close the trays. 5 Open the front door and remove the orange packing tape at the front transfer roller area and on the lock lever for the print cartridge. Close the front door. Save all packing material. You might need it to repack the printer at a later date. ENWW Remove internal packaging 11