HP AE370A Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap
HP AE370A - Brocade 4Gb SAN Switch 4/12 Manual
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP AE370A manual content summary:
- HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 1
53-1001186-01 24 November 2008 Fabric OS Command Reference Manual Supporting Fabric OS v6.2.0 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 2
covered by the GNU General Public License or other open source license agreements. To find-out which open source software is included in Brocade products, view the licensing terms applicable to the open source software, and obtain a copy of the programming source code, please visit http://www - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 3
Communications Systems, Incorporated Corporate Headquarters Brocade Communications Systems, Inc. 1745 Technology Drive San Jose, CA 95110 Tel: 1-408-333-8000 Fax: 1-408-333-8101 Email: [email protected] European and Latin American Headquarters Brocade Communications Switzerland Sàrl Centre Swissair - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 4
throughout. March 2008 Corrections and updates to 31 July 2008 commands. Removed "Brocade Optional Features" from Preface. Added trademark note to Preface. Cosmetic edits throughout. Added 3 new commands to support Encryption. Modified 1 command. Updated Preface and RBAC/AD table. August 2008 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 5
xix Supported hardware and software xix What is new in this document xx Document conventions xxii Notice to the reader xxiv Additional information xxv Getting technical help xxv Document feedback xxvii Chapter 1 Using Fabric OS Commands In this chapter 1 Understanding role-based - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 6
52 bladeEnable 53 bpPortLoopbackTest 55 bpTurboRamTest 58 burninErrClear 59 burninErrShow 60 burninLevel 61 burninStatus 62 cfgActvShow 63 cfgAdd 64 cfgClear 65 cfgCreate 66 cfgDelete 67 cfgDisable 68 cfgEnable 69 cfgMcdtmode 70 cfgRemove 71 cfgSave 72 cfgSaveActiveToDefined 73 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 7
Fabric OS Command Reference 53-1001186-01 configShow 97 configUpload 101 configure 105 configureChassis 113 cryptoCfg 115 dataTypeShow 162 date 163 dbgShow 165 defZone 166 diagClearError 168 diagDisablePost 169 diagEnablePost 170 diagHelp 171 diagPost 172 diagRetry 173 diagSetCycle - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 8
fcrLsanCount 237 fcrLsanMatrix 238 fcrPathTest 243 fcrPhyDevShow 246 fcrProxyConfig 248 fcrProxyDevShow 250 fcrResourceShow 252 fcrRouterPortCost 254 fcrRouteShow 256 fcrXlateConfig 257 fddCfg 260 fdmiCacheShow 262 fdmiShow 263 ficonClear 264 ficonCupSet 265 viii Fabric OS Command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 9
Fabric OS Command Reference 53-1001186-01 ficonCupShow 267 ficonHelp 269 ficonShow 270 fipsCfg 276 firmwareCommit 279 firmwareDownload 280 firmwareDownloadStatus 285 firmwareKeyShow 288 firmwareKeyUpdate 289 firmwareRestore 291 firmwareShow 292 fosConfig 293 fruReplace 296 fspfShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 10
historyLastShow 338 historyMode 339 historyShow 340 httpCfgShow 342 i 343 iclCfg 345 ifModeSet 347 ifModeShow 349 interfaceShow 351 interopMode 355 iodDelayReset 358 iodDelayShow 359 iodReset 360 iodSet 361 iodShow 363 ipAddrSet 364 ipAddrShow 369 ipfilter 372 ipsecConfig 377 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 11
Fabric OS Command Reference 53-1001186-01 licenseShow 428 linkCost 429 login 431 logout 432 lsanZoneShow 433 lsCfg 435 lsDbShow 440 fosExec 443 memShow 445 msCapabilityShow 446 msConfigure 447 msPlatShow 449 msPlatShowDBCB 450 msPlClearDB 451 msPlMgmtActivate 452 msPlMgmtDeactivate - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 12
perfAddUserMonitor 500 perfAddWriteMonitor 502 perfCfgClear 503 perfCfgRestore 504 perfCfgSave 505 perfClearAlpaCrc 506 perfDelEEMonitor 507 perfDelFilterMonitor 508 perfHelp 509 perfMonitorClear 510 perfMonitorShow 512 perfSetPortEEMask 516 perfShowAlpaCrc 518 perfShowPortEEMask 519 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 13
Fabric OS Command Reference 53-1001186-01 portCfgPersistentDisable 574 portCfgPersistentEnable 575 PortCfgQos 576 portCfgShow 578 portCfgSpeed 585 portCfgTrunkPort 586 portCfgVEXPort 587 portCmd 590 portDebug 594 portDisable 595 portEnable 596 portErrShow 597 portFlagsShow 599 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 14
portStatsShow 653 portSwap 657 portSwapDisable 658 portSwapEnable 659 portSwapShow 660 portTest 661 portTestShow 663 portTrunkArea 664 portZoneShow 670 powerOffListSet 671 powerOffListShow 673 psShow 674 reboot 675 routeHelp 676 secActiveSize 677 secAuthSecret 678 secCertUtil 680 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 15
Fabric OS Command Reference 53-1001186-01 sfpShow 718 shellFlowControlDisable 722 shellFlowControlEnable 723 slotPowerOff 724 slotPowerOn 725 slotShow 726 SnmpConfig 730 spinFab 737 sshUtil 740 statsClear 744 stopPortTest 745 supportFfdc 746 supportFtp 747 supportSave 749 supportShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 16
Chapter 3 systemVerification 787 tempShow 789 timeOut 790 topologyShow 791 traceDump 795 trackChangesHelp 797 trackChangesSet 798 trackChangesShow 799 trunkDebug 800 trunkShow 801 tsClockServer 803 tsTimeZone 805 turboRamTest 808 upTime 809 uRouteConfig 810 uRouteRemove 811 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 17
Appendix A Appendix A: Command availability In this appendix 849 Command validation checks 849 Encryption commands and permissions 850 General Fabric OS commands and permissions 852 Fabric OS Command Reference xvii 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 18
xviii Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 19
SAN and Brocade switches. • Chapter 2, "Fabric OS Commands" provides command information. • Chapter 3, "Primary FCS commands" summarizes the subset of commands available when an FCS policy is enabled. • Appendix A, "Appendix A: Command availability," explains the Role-Based Access Control as well - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 20
• Brocade 7600 • Brocade 48000 • Brocade DCX Backbone • Brocade DCX-4S Backbone • Brocade Encryption Switch • Blades: FA4-18, FC4-16, FC4-16IP, FC4-32, FC4-48, FC10-6, FR4-18i, FC8-16, FC8-32, FC8-48, FS8-18 Although many different software and hardware configurations are tested and supported by - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 21
. • configure - New operands to configure port area, XISL use, and disable FID check. This command now only configures switch configuration. There is a new command to configure chassis parameters (configureChassis). • cryptoCfg - New operands to support HP SKM key vault and certificate exchange/node - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 22
been deprecated. Help pages have been removed from the Command Reference manual. Help pages on the switch display a message stating that the commands are no longer supported. • bladeBeacon - Use switchBeacon or ChassisBeacon instead. • diagSetBurnin - Use systemVerification. • diagSkipTests - No - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 23
examples For readability, command names in the narrative portions of this guide are presented in mixed letter case, for example, switchShow. In examples, command letter case is all lowercase. If there are exceptions, this manual specifically notes those cases in which a command is case-sensitive - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 24
that can cause damage to hardware, firmware, software, or data. DANGER A Danger statement specific to Brocade and Fibre Channel, see the Brocade Glossary. For definitions of SAN-specific terms, Referenced Trademarks and Products Commvault EMC HP IBM Legato Microsoft Corporation NetApp Sun - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 25
SAN design, implementation, and maintenance, you can obtain Building SANs with Brocade Fabric Switches through: http://www.amazon.com For additional Brocade documentation, visit the Brocade SAN help Contact your switch support supplier for hardware, firmware, and software support, including product - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 26
200E -On the non-port side of the chassis. • Brocade 4016-On the top of the switch module • Brocade 4018-On the top of the blade • Brocade 4020 and 4024-On the bottom of the switch module • Brocade 300, 4100, 4900, 5100, 5300, 7500, and Brocade Encryption Switch-On the switch ID pull-out tab located - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 27
find an error or an omission, or you think that a topic needs further development, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number and as much detail as possible about your issue, including the topic heading and page number and your - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 28
xxviii Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 29
the command line interface 3 Understanding role-based access control Fabric OS implements Role-Based Access Control (RBAC) to control access to all Fabric OS operations. Seven roles are supported, as defined in Table 1. Role definitions are guided by perceived common operational situations and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 30
3 Switch Types Switch Type Definition All Switches Command can be executed in any switch context. Base Switch Only Command can be executed only on the base switch. Default Switch Only Command can be executed only on the default switch. N/A Command is a chassis command or not supported in - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 31
in this manual. Using the command line interface The Fabric OS command line interface (accessed via Telnet, SSH, or serial console) provides full management capability on a Brocade switch. The Fabric OS CLI enables an administrator to monitor and manage individual switches, ports, and entire - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 32
of SAN events across every switch in the fabric. • Management of Brocade licenses. The documentation for each command includes a synopsis of its syntax, a description of command use, and a set of examples. The same information can be accessed by issuing help command on a Brocade switch or director - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 33
[-p port] [-d the Fabric OS Message Reference manual for specific details. There are Guide for configuration procedures. Configuration changes are persistently saved and take effect with the next AAA request. The configuration applies to all switch instances in a platform supporting multiple switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 34
can use centralized RADIUS servers to manage AAA services for a switch, as defined in the RFC 2865 RADIUS specification. Fabric OS v6.1.0 or later is required to configure LDAP while in FIPS mode. Refer to the Fabric OS Administrator's Guide for configuration procedures. This command can be executed - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 35
2 -s secret Specifies a common secret between the switch and the RADIUS server. The secret must be between required. --authspec "aaa1[;aaa2" [-backup] Replaces the configuration with the specified AAA service. Each service can be specified only once in the list, for example, "radius; local; - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 36
"ldap" is specified, the first Active directory (AD) server is contacted. services are available. Displays command usage. To display the current RADIUS configuration: switch:admin> aaaconfig --show RADIUS CONFIGURATIONS Position Server Port Secret Timeout(s) Auth-Protocol 1 192.168.233.48 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 37
See Also To replace the AAA service with backup option: switch:admin> aaaconfig --authspec "ldap;local" -backup none aaaConfig 2 Fabric OS Command Reference 9 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 38
This command follows a batched-transaction model. When executed with the --activate, --add, --clear, --create, --deactivate, --delete, -- option sends the changes made in the transaction buffer to all other switches and permanently saves the changes to the Defined configuration in persistent storage. - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 39
ad 2 Note Operands All switches, switch ports and devices in the fabric that are not specified in The following actions are supported: --activate arg Activates an Admin Domain. An Admin Domain is enforced only if it is in an activated state. AD0 is always in an activated state. By default, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 40
Admin Domain with optionally specified device or switch members. A newly created Admin Domain is in an activated state. It initially contains no zone operation is not allowed on AD0. ad --deactivate does not disable any ports. Existing logins to a deactivated Admin Domain are not terminated; however, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 41
corresponding Admin Domain is not activated. This operation succeeds only if all members that are from non-Admin Domain aware switches are marked with a plus sign (+). Members that Admin Domain transaction. The following arguments are supported with selected AD actions: ad_id Uniquely identifies - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 42
zone WWN member types. Benefits include: • Supports node or port WWNs. • End-device members, whose WWNs switch. Any switch member specified in Domain ID format is converted into a switch WWN based on the current fabric information. Operations with switch list fail if the domain ID to switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 43
currently enforced (effective configuration). Examples To enable AD5: switch:admin> ad --activate 5 You are about to activate a new admin domain. Do you want to activate '5' admin domain (yes, y, no, n): [no] y To enable AD_13: switch:admin> ad --activate AD_13 To add new device members to AD1 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 44
want to deactivate '5' admin domain (yes, y, no, n): [no] y To delete AD13: switch:admin> ad --delete 13 You are about to delete an AD. This operation will fail if an a new Admin Domain context by specifying the AD number: switch:admin> ad --select 12 16 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 45
Transaction buffer configuration no configuration Defined configuration AD: 1 : AD1 Active Device WWN members: Switch port members: Switch WWN members: Effective configuration AD: 1 : AD1 Active Device WWN members: Switch port members: Switch WWN members: 21:00:00:80:e5:12:8b:37 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 46
:2b; 10:00:00:06:2b:12:68:3f; 1,8; 69,16; AD Number: 3 AD Name: AD3 State: Inactive Device WWN members: Switch port members: 11:22:33:44:55:66:77:88*; 10:00:00:06:2b:12:64:54; 3,28; 3,29; 3,30; 3,31; 69,16; 69,18; 69,19; 69,21; 1,115; Fabric OS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 47
; Effective configuration AD Number: 50 AD Name: AD50 State: Active Device WWN members: Switch port members: 10:00:00:00:00:17:00:00; 10:00:00:00:00:15:00:00; 2,52; 2,53; 2,54; 2,55; 21,5; 3,28; 3,29; 98,72; 98,75; 69,16; 69,18; 69,21; 1,336; 1,337; Member does not - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 48
the AD transaction (yes, y, no, n): [no] y See Also To display the current Admin Domain transaction: switch:admin> ad --transshow Current transaction token is 26816 It is abortable switch:admin> ad --transshow There is no outstanding zoning transaction cfgSave, cfgTransShow, defZone, logout. 20 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 49
F_Port to N_Port mapping. • Configure N_Port failover and failback policies. • Configure and display Port Group policy. • Create or remove a Port group. • Display Port Groups and Member N_Ports. • Add or delete N_Ports in Port group. • Display all policies and their status. • Enable or disable Auto - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 50
are saved persistently as config keys. Use the portCfgnPort command to set a port as N_Port. AG is supported only on selected Brocade hardware platforms. Refer to the Access Gateway Administrator's Guide for Hardware support and AG configuration procedures. In non-AG mode, the only two actions - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 51
applies to all the ports on the switch. By default all devices have access to the fabric on all ports. --policydisable policy Disables the N_Port mapping. Displays Port Group configuration. The port grouping feature supports specifying a set of N_Ports to be included in the Port Group (PG) - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 52
be included in the policy. The list must be enclosed in quotation marks. Ports must be separated by semicolons. Maximum numbers of ports allowed in a port group is MAX_PORT. Port Group ID must not exceed 64 characters. --pgadd pgid "N_Port1 [; N_Port2;...]" Adds one or more N_Ports to the specified - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 53
in double quotation marks. List members must be separated by semicolons. The maximum number of entries in the allowed device list is twice the per port maximum login count. Replace the WWN list with an asterisk (*) to indicate all access on the specified F_Port list. Replace the F_Port list with an - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 54
and 12: switch:admin> ag --show Name : switch_ST1 NodeName : 10:00:00:05:1e:35:9b:e7 Number of Ports : 16 IP Address(es) : 10.115.74.53 Firmware Version : v6 0 10.32.74.109 4;5;6; 1 0x6d0b00 20:0b:00:05:1e:37:11:aa 0 1 10.32.74.109 7;8;9; 2 0x6d0c00 20:0c:00:05:1e:37:11:aa 1 0 10.32.74.109 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 55
admin> ag --policydisable pg 4. To enable auto policy when both policies are disabled and the switch is already disabled: switch:admin> ag --policyeanble auto All Port related configurations will be lost. Please save the current configuration using configupload. Do you want to continue? (yes, y, no - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 56
> ag --mapset 0 "" F_Port to N_Port mapping has been updated successfully 3. To add F_Ports 4 and 6 to N_Port 0 (observe that Port 0 has no configured F_Ports): switch:admin> ag --mapset 0 "4;6" F_Port to N_Port mapping has been updated successfully 4. To add F_Port 5 to N_Port 2 (observe that - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 57
and failback policies on a single port: switch:admin> ag --failoverenable 1 Failover policy is enabled for port 1 switch:admin> ag --failoverdisable 0 Failover policy is disabled for port 0 switch:admin> ag --failovershow 0 Failover on N_Port 0 is not supported switch:admin> ag --failbackdisable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 58
2 Failback policy is enabled for port 2 switch:admin> ag --failbackenable 3 Failback on N_Port 3 is not supported switch:admin> ag --failbackenable 2 Failback on N_Port 2 is supported Port Group commands 1. To display Port Group information: switch:admin> ag --pgshow PG_ID N_Ports - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 59
the F_Port[s] 2. To remove two devices from the lists of allowed devices for ports 1 and 9: switch:admin> ag --adsdel "3;9" "22:03:08:00:88:35:a0:12;22 F_Port[s] 3. To add a two new device to the lists of allowed devices for ports 1 and 9: switch:admin> ag --adsadd "3;9" "20:03:08:00:88:35:a0:12;21: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 60
2 ag See Also 4. To display the lists of allowed devices on the switch: switch:admin> ag--adsshow F_Port WWNs Allowed 1 ALL ACCESS 3 20:03:08:00:88:35 ACCESS 11 NO ACCESS 12 NO ACCESS 13 ALL ACCESS portCfgNPort, portCfgNPIVPort 32 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 61
the fabric: switch:admin> agshow --name WT_Stealth Name : WT_Stealth World Wide Name : 10:00:00:05:1e:34:e4:bd N-Port ID(s) : 0x010200 Number of Ports : 16 IP Address(es) : 10.202.90.231 Firmware Version : v1.0.0 N-Ports : 1 F-Ports : 2 Attached F-Port information: PortID Port WWN - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 62
:00:05:1e:04:06:ae 24 10.32.173.64 v6.0.0 local L5D2_B14_4024_1 See Also To display all Access Gateways attached to the fabric: switch:admin> agshow Worldwide Name Ports Enet IP Addr Firmware Local/Remote Name 10:00:00:05:1e:02:b7:2c 16 10.32.173.62 v6.0.0 remote L5D2_B10_4016_1 10:00:00 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 63
by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port area or port index pair. Use switchShow for a list of valid port area or port index numbers. • A world wide name (WWN). Examples To add members to zone aliases array1, array2, and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 64
index numbers. • A world wide name (WWN). Examples To create a zone alias defined by domain and port index pairs: switch:admin> alicreate "array1", "2,32; 2,33; 2,34" To create a zone alias with one member defined by WWN. switch:admin> alicreate "array2", "21:00:00:20:37:0c:66:23" See Also aliAdd - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 65
OS Commands" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operand is required: "aliName" Specify the name of the zone alias to be deleted. This operand must be enclosed in - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 66
be separated by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port area or index number pair. Use switchShow for a list of valid port area or index numbers. • WWN The member list is located by an exact string match; therefore, it is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 67
configuration information (both defined and effective) is displayed. Refer to cfgShow for a description of this display. Examples To display all zone aliases beginning with "arr": switch:admin> alishow "arr*" alias: array1 21:00:00:20:37:0c:76:8c alias: array2 21:00:00:20:37:0c:66:23 See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 68
that policy settings for the base switch or any switch in the base fabric affect all traffic going through the base fabric including any logical fabric traffic that uses the base fabric. When invoked without arguments, this command displays the APT policies supported on this switch, as well as the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 69
option supported under both port-based and exchange-based policies. The following policies are supported: AP switch performance. Examples To display the current APT policy: switch:admin> aptpolicy Current Policy: 3 1(ap) 3 1 (ap): Default Policy 1: Port Based Routing Policy 3: Exchange Based - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 70
, and to enable or disable audit filters. Based on the configuration, certain classes are logged to values are: 1-ZONE, 2-SECURITY, 3-CONFIGURATION, 4-FIRMWARE and 5-FABRIC filters. This operand is required. configuration: switch:admin> auditcfg --class 2,3 Audit filter is configured. switch:admin> - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 71
See Also switch:admin> auditcfg --show Audit filter is disabled. 1-ZONE 2-SECURITY 3-CONFIGURATION 4-FIRMWARE 5-FABRIC Severity level: INFO auditDump auditCfg 2 Fabric OS Command Reference 43 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 72
To display the audit log: switch:admin> auditdump -s 0 AUDIT, 2008/08/11-13:14:53 (UTC), [SULB-1003], INFO, FIRMWARE, NONE/NONE/NONE/None/CLI, None/sw48000_100/FID CHASSIS, , Firmwarecommit has started. 1 AUDIT, 2008/08/11-13:16:12 (UTC), [SULB-1003], INFO, FIRMWARE, NONE/NONE/NONE/None/CLI - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 73
local switch authentication port. Authentication parameters are set on a per-switch switch context only, and must be configured separately for each logical switch. Use setcContext to change the current logical switch supported over DH-CHAP on the local switch. -g 0|1|2|3|4|* Sets the Diffie-Hellman - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 74
FIPS. Refer to the Fabric OS Administrator's Guide for details on FIPS configuration. --policy Sets the switch authentication policy or device authentication policy. The following options are supported: -sw on|off|active|passive Sets the switch authentication policy. Specify one of the following - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 75
policy to active mode: switch:admin> authutil --policy -sw active Warning: Activating the authentication policy requires either DH-CHAP secrets or PKI certificates depending on the protocol selected. Otherwise, ISLs will be segmented during next E-port bring-up. ARE YOU SURE (yes, y, no, n): [no - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 76
See Also To set the Device policy to passive mode: switch:admin> authutil --policy -dev passive Warning: Activating the authentication policy requires DH-CHAP secrets on both switch and device. Otherwise, the F-port will be disabled during next F-port bring-up. ARE YOU SURE (yes, y, no, n): [no - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 77
1022 characters. If the banner text length exceeds the maximum allowed, the software truncates the input. To close the banner text string, enter a period . Examples To set a new banner for a switch: switch:admin> bannerset "My banner" switch:admin> bannerSet Please input context of security banner - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 78
OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To display the banner for a switch: switch:admin> bannershow Banner: Do not log into this switch if you are not an authorized administrator. See Also bannerSet 50 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 79
a bit map represents a port, with the least significant bit in each row representing port 0, 32, 64, and so on. Note switch with 128 ports, the member ports consist of ports 7, 13, 42, 84, 85, and 86. The final Member Ports bit set represents the embedded port (frames sent to be handled by firmware - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 80
this command to disable all user ports on a blade. All ports on the blade are taken offline. If the switch was connected to a fabric through this blade, the remaining switches reconfigure, and this switch will reconfigure based on the other blade ports. As each port is disabled, the front panel LED - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 81
the power-on self-test (POST) are enabled (except for persistently disabled ports). They may come online if connected to a device, or remain offline if disconnected. Use bladeEnable to re-enable the blade after making configuration changes or running offline diagnostics. If the switch is connected - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 82
2 bladeEnable See Also switch:admin> slotshow Slot Blade Type ID Status 1 SW BLADE 2 ENABLED 2 UNKNOWN VACANT 3 UNKNOWN VACANT 4 SW BLADE 2 ENABLED 5 CP BLADE 1 ENABLED 6 CP BLADE 1 ENABLED 7 SW BLADE 2 ENABLED 8 UNKNOWN VACANT 9 UNKNOWN VACANT 10 UNKNOWN VACANT - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 83
switch. The test sends frames from a specified blade processor (BP) port transmitter and loops the frames back into the same BP port , ... Notes This command does not support High Availability (HA). This command is currently supported only on the Brocade Encryption platform at a default speed of - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 84
Brocade Encryption platforms, ports 80-103 are the only valid ports, because these are the only blade ports with access to the Vader chip. Refer to the itemlist help page for further information on the itemlist parameter. Examples To run the test on blade ports 80-90 with one frame: switch:admin - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 85
following error messages. If errors persist, contact Technical Support. DATA Data received does not match the data sent. ERRSTAT Errors were found in the ASIC statistics. INIT Port failed to initialize. PORTDIED A previously initialized port went to an un-initialized state. STATS Errors - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 86
is currently supported only on the Brocade Encryption platform. It complements the turboramTest, which tests the Condor2 ASIC on the switch. The blade ports to test. By default all blade ports in the specified blade are tested. Note that on the Encryption platform, ports 80-103 are the blade ports - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 87
is required: slotnumber Specify a nonzero value for the slot number from which to clear burn-in errors. Examples To clear burn-in errors from slot 2: switch:admin> burninerrclear 2 See Also burninErrShow Fabric OS Command Reference 59 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 88
is required: slotnumber A nonzero value that specifies the slot number from which to display burn-in errors. Examples To display burn-in errors from slot 2: switch:admin> burninerrshow 2 See Also burninErrClear 60 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 89
-on self-test (POST) phase II each time a switch blade is powered on. 2. The burn-in test stores errors on the local persistent error storage on which the error occurs. For multi-bladed products, this is the independent blade, and for fixed-port-count products, this is the chassis-persistent storage - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 90
Description Use this command to display the burn-in status of blade in a specified slot. Command output includes the slot number, 926 Script burnin burnin burnin burnin To display the burn-in status for slot 3: switch:admin> burninstatus --slot 3 Slot State Status Run Cmd TotCmds PID 3 ABORT - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 91
in effect. The devices that an initiator sees are based on this configuration. The effective configuration is built for details. Operands none Examples To display the effective zone configuration information: switch:admin> cfgactvshow Effective configuration: cfg: c4 zone: z3 33:07:06:05 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 92
For the change to be preserved across switch reboots, save the configuration to nonvolatile memory can be issued only from the primary FCS switch. Operands The following operands are required: "cfgName new zones to the configuration "Test_cfg": switch:admin> cfgadd "Test_cfg", "greenzone; bluezone - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 93
cfgClear command, use the cfgDisable command to commit the transaction and then disable and clear the zone configuration in nonvolatile memory for all the switches in the fabric. If no current zoning configuration exists, use the cfgSave command. If the default zone access mode is "No Access", then - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 94
(see cfgShow). For the change to become effective, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. Refer to the zoneCreate command for more information on name and member - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 95
and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operand is required: "cfgName" Specify a name for the zone configuration to be deleted, in quotation marks. Examples To delete - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 96
. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands none Examples To disable the current zone configuration: switch:admin> cfgdisable You are about to disable zoning configuration. This action will disable any previous zoning configuration - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 97
" and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operand is required: cfgName Specifies the name of the zone configuration. Examples To enable the zone configuration USA_cfg - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 98
chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command is effective only when the Brocade switch or director is in McDATA fabric mode. Operands This command has the following operands: --enable Enables McDATA zoning features. --disable Disables - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 99
(see cfgShow). For the change to become effective, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. Notes The execution of this command is subject to Virtual Fabric or - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 100
. This command writes the defined configuration and the name of the effective configuration to nonvolatile memory in all switches in the fabric. The saved configuration is automatically reloaded at power on, and, if a configuration was in effect at the time it was saved, the same configuration is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 101
details. This command is only effective when the Brocade switch/director is in McDATA fabric mode. Operands The cfgSaveActiveToDefined 07 12,64 [output truncated] Run cfgSaveActiveToDefined to save the active (effective) zoning configuration to the defined configuration. switch:admin> - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 102
. The devices that an initiator sees in the fabric are based on this configuration. The effective configuration is built when a specific command is executed after a zoning transaction was aborted on the local switch, it displays a warning message: Warning: Current Zoning Transaction was aborted - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 103
: Red_zone 1,0 21:00:00:20:37:0c:76:85 21:00:00:20:37:0c:71:df To display only configuration names: switch:admin> cfgshow "*" cfg: USA1 Blue_zone cfg: USA_cfg Red_zone; Blue_zone See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgTransAbort, cfgTransShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 104
. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operand is optional: integer If a nonzero integer is specified, the size of the nonvolatile memory allocated for the zone database is displayed. The zone database includes both - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 105
Configuration - 4 Each AD's Zone Database Size: cfgsize Info for AD Number:0 committed - 242 bytes transaction - 0 bytes (AD Name: AD0, State=Active): cfgsize Info for AD Number:1 committed - 16 bytes transaction - 0 bytes (AD Name: AD1, State=Active): cfgsize Info for AD Number - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 106
and Appendix A, "Command Availability" for details. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands When invoked without operand, this command aborts the current transaction. The following operand is optional: token Specify the token ID of the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 107
:admin> cfgclear Do you really want to clear all configurations? (yes, y, no, n): [no] y Clearing All zoning configurations... switch:admin> cfgtransshow Current transaction token is 271010736 It is abortable See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 108
active, faulty, or disabled port is suppressed, and only the beaconing pattern is shown. Other commands are still executable and functional. However, if diagnostic frame-based on: switch:admin> chassisbeacon 1 Chassis beacon success 1 See Also To turn beaconing mode off: switch:admin> - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 109
to a host so it can be used as a guide to re-establishing the configuration data in the new mode. Brocade 48000 director: switch:admin> chassisconfig Current Option: 5 All Supported Options Option 5: One 384-port switch Blade ID's 17, 18, 24, 31, 33, 36, 39, 37, 51, 55 in slots 1-4, 7-10 Blade ID 16 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 110
command to enable a Virtual Fabric-aware chassis. All Fibre Channel ports that passed the power-on self test (POST) are enabled. They may come online multiple logical switches and physically connected to multiple logical fabrics, the logical switches rejoin their fabrics. As each port is enabled, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 111
the chassis is enabled. It is not necessary to disable a chassis before rebooting or powering off. To disable the ports of a single logical switch, use the switchDisable command. To disable the ports of a single blade, use the bladeDisable command. Note The execution of this command is subject to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 112
double quotation marks. A chassis name can include up to 31 characters on the Brocade 300, 5100, 5300, and 5410 platforms. On all other platforms, the chassis To change the chassis name to "dilbert": switch:admin> chassisname dilbert switch:admin> chassisname dilbert See Also switchName 84 Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 113
displays the chassis backplane version number, in hexadecimal. 2 Object type: CHASSIS, FAN, POWER SUPPLY, SW BLADE (switch), CP BLADE (control processor), WWN (World Wide Name), or UNKNOWN. Object number: Slot nn (for blades), Unit nn (for everything else). If the FRU is part of an assembly - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 114
FRUs for a switch: switch:user> chassisshow Chassis Backplane Revision: 1C SW BLADE Slot: 3 Header Version: Power Consume Factor: Factory 15 Month: 7 Year: 2001 28 days 16 days 555-374757 234-294-12345 2734658 A.00 CP BLADE Slot: 6 Header Version: Power Consume Factor: Factory Part Num: Factory - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 115
. The maximum number of saved entries for this command is 512. The CLI history is erased, if the switch is rebooted or a CP failover has occurred on the active CP. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 116
aliases, zones, and configurations) • Security parameters and policies • User account passwords (includes all user configuration and all built-in accounts) • Switch PID format • Ethernet Link Mode Refer to the help files for configure and configureChassis help for more information on default values - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 117
the existing ones. When issuing configDefault on the Brocade 7500, it persistently disables the ports. The execution of this command is subject to Virtual following operands: -fid FID Specifies the Fabric ID of the logical switch for which to reset the configuration. This operand is valid only - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 118
-sfid options are not valid. Configuration management supports download of v6.1 or v6.2+ configuration files to a switch running v6.2 firmware, but a v6.2 configuration file is not accepted by a switch running pre-v6.2 firmware. A v6.1 configuration downloaded to a 6.2 system is applied only to the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 119
switch and the source FID and associated configuration must be defined in the configuration download. In addition, downloading an SFID configuration resets the target FID ports as a member in the previous FCS_POLICY. • In the [Active Security Policies] section, the FCS_POLICY must be exactly the same - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 120
Do not manually edit a configuration file after uploading the file and before downloading the file to a switch. Manual editing bypasses the IP address of the external host, from which to download the configuration. IPv4 and IPv6 addresses are supported. To be able to mention the FTP server by name - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 121
minutes to complete for large files. Do you want to continue [y/n]: y Activating configDownload: Switch is disabled configDownload complete: All config parameters are downloaded To download switch configuration data to the current logical switch from an external FTP server (no chassis permissions - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 122
2 configDownload Diagnostics The configuration download may fail for one or more of the following reasons: • The switch has not been disabled. Disabling the switch is not necessary for configuration files containing only certain SNMP or Fabric Watch parameters. You may wish to attempt - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 123
-local|-USB|-U Description This command displays a list of names, sizes, and creation dates of configuration files saved on the local chassis switch:admin> configlist -local config.txt config2.txt next_cfg.txt 25679 25679 20977 2007 Jan 02 15:16 2007 Jan 06 15:16 2007 Jan 18 15:16 See - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 124
file to be removed. If the -file option is omitted, the command prompts for a file name. Examples To remove a configuration file from the local chassis: switch:admin> configremove -local first_config.txt To remove a configuration file from an attached USB device without specifying a filename - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 125
.2.0, configuration data is grouped into chassis information and switch information. Each configuration type is managed separately. For pattern. Use of wildcards and other common regular expression operators is not supported. Some configuration settings do not display when filtered. When in doubt, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 126
: switch :admin port.8.fabricId:4 fcRoute.port.8.ratov:10000 fcRoute.port.8.edtov:2000 fcRoute.port.8.frontConfigDid:160 fcRoute.port.8.portType:400 fcRoute.port.8.portMode:0 fcRoute.port.8.autoElp:7 fcRoute.port.9.xportAdmin:DISABLED fcRoute.port.9.fabricId:5 fcRoute.port.9.ratov:10000 fcRoute.port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 127
.lockoutthreshold:0 passwdcfg.lockoutduration:30 passwdcfg.adminlockout:0 passwdcfg.repeat:1 passwdcfg.sequence:1 passwdcfg.status:0 To display switch configuration data for FID 20: switch :admin> configshow -fid 20 [Configuration upload Information] Configuration Format = 2.0 date = Tue Oct 7 14:53 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 128
= 3 [Switch Configuration Begin : 0] SwitchName = Spirit_66 Fabric ID = 20 [Boot Parameters] boot.name:Spirit_66 boot.ipa:10.32.228.66 boot.licid:10:00:00:05:1e:41:5c:c1 boot.mac:10:00:00:05:1e:41:5c:c1 boot.device:eth0 boot.gateway.ipa:10.32.224.1 [Configuration] acl.clear:0 ag.port.nfportfailback - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 129
not valid. Configuration management supports backward compatibility only with configuration download, not the upload. You can download a v6.1 configuration to a switch running v6.2 firmware, but a v6.2 configuration file is not accepted by a switch running pre-v6.2 firmware. For more information on - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 130
Saved Files] Contains the FICON CUP-related configuration parameters. [Banner] Contains banner header information. The chassis configuration file contains the following sections: [Configuration upload Information] Displays configuration format version, switch firmware version, time stamp, and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 131
configuration file after uploading the file and before downloading the file to a switch. Manual editing bypasses sanity checks for some configuration parameters and results in unpredictable system behavior Operands The following operands are supported: -p ftp | -ftp or -p scp | -scp Specifies the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 132
: configUpload complete: All config parameters are uploaded To upload the switch configuration that belongs to a logical switch with FID 100: switch:admin> configupload Protocol (scp, ftp, local) [ftp]: Server Name or IP Address [host]: 10.32.220.100 User Name [user]: jdoe File Name [config.txt - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 133
be set with the configure command: • Switch fabric parameters • Virtual channel parameters • F_Port login parameters • Zoning operation parameters • Remote State Change Notifications (RSCN) transmission mode • Arbitrated Loop parameters • System Services settings • Portlog Events enable or disable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 134
Use Enable a 256 Area Limit R_A_TOV E_D_TOV WAN_TOV MAX_HOPS Data Field Size Sequence Level Switching Disable Device Probing yes 0 10000 2000 0 7 2112 0 0 0 0 0 16 yes no varies yes or no 0 to 2 E_D_TOV * 2 to 120000 1000 to R_A_TOV / 2 0 to R_A_TOV / 4 7 to 19 256 to 2112 0 or 1 0 or 1 0 or 1 0 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 135
supported only on Virtual Fabric-aware platforms under the following conditions: Virtual Fabrics must be enabled on the switch, and the switch cannot be a base switch. In addition, on the Brocade DCX or DCX-4S the switch cannot be a default switch, include interchassis link (ICL) ports or GigE ports - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 136
To reduce problems, the configuration Size The data field size specifies the largest possible value, in bytes, for the size of a type 1 (data) frame. The switch advertises this value to other switches support is also available for per-frame-based determined by the per-port configuration on the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 137
symbol) Field Type Default Range Maximum logins per switch Number Maximum logins per port Logins per second Login stage interval (milliseconds) Number Number Number 16 * the max 1 to 126 * the number of ports max number of ports 126 1 to 255 0 0 to 100 0 0 to 10000 Note - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 138
the RSCN transmission mode values fields. TABLE 6 RSCN transmission modes Field End-device RSCN Transmission Mode Domain RSCN to End-device for switch IP address or name change Type number number Default 1 0 Range 0 to 2 0 to 1 End-device RSCN Transmission Mode values are as follows: 0 RSCN - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 139
error block from the device. This extended link services command is defined by the FC standards. determine whether or not various types of port events are logged. Each event type switch with FID 20: switch:admin> setcontext 20 switch:admin>switchdisable Fabric OS Command Reference 111 53-1001186 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 140
4000..120000) [10000] E_D_TOV: (1000.. 5000) [2000] WAN_TOV: (0..30000) [0] MAX_HOPS: (7..19) [7] Data field size: (256..2112) [2112] Sequence Level Switching: (0..1) [0] Disable Device Probing: (0..1) [0] Suppress Class F Traffic: (0..1) [0] Per-frame Route Priority: (0..1) [0] Long Distance Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 141
system parameters. In a non-Virtual Fabric environment, disable the switch before configuring chassis parameters. Note The execution of this command is Range cfgload Enforce secure Config Upload/Download boolean no Enforce signature validation for firmware boolean no no/yes no/yes Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 142
set to a value other than 0, then any nonfatal HW ASIC data parity error causes the problem blade to be powered off. Examples To enable signature validation for downloading firmware: switch:admin> configurechassis Configure... cfgload attributes (yes, y, no, n): [no] y Enforce secure config Upload - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 143
configure and manage the Brocade Encryption Switch and the FS8-18 encryption blade. These platforms support the encryption of data-at hosts, follow the instructions described in the section "Configuring a multi-path Crypto LUN" in the Fabric OS Encryption Administrator's Guide. Note The execution - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 144
is an encryption switch or a chassis containing one or more encryption blades. A node is identified by the switch IP address or switch WWN, which is Zeroization of all critical security parameters on the local encryption switch or blade. • Certificate display and management. Note The initial setup - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 145
mutual authentication. Refer to the Fabric OS Encryption Administrator's Guide for details. The --initnode function must be performed before encryption engine to be initialized. This operand is required on bladed systems. --regEE slot_number Registers a previously initialized encryption engine - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 146
, you must re-enable the encryption engine for encryption every time a Brocade Encryption Switch or DCX chassis goes through a power cycle event or after issuing slotpoweroff followed by slotpoweron for an FS8-18 blade. This command is valid on all nodes. slot_number Specifies the slot number - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 147
.2.0 supports two-way certificate exchange only for the HP SKM key vault. -CPcert Exports the member node CP certificate. --import Imports a certificate from a specified external host or from a mounted USB storage device to a predetermined directory on the local encryption switch or blade. This - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 148
group leader succession. At any given time, there is only one active group leader in an encryption group. The group leader succession list Specifies a member node with the group leader: member_node_WWN Specifies the switch world wide name of the member node. member_node_certfile Specifies the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 149
is required. Zeroizes all critical security parameters on the local encryption switch or blade including all data encryption keys. This command is valid on all LKM | RKM | SKM cryptocfg --set -failbackmode auto | manual cryptocfg --set -hbmisses value cryptocfg --set -hbtimeout value cryptocfg - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 150
part of the same encryption group. Fabric OS v6.2.0 supports up to four nodes per encryption group, and up group leader. The encryption switch or blade on which you create the OS Encryption Administrator's Guide for a more comprehensive - Failback mode: Auto or Manual - Heartbeat misses: value - - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 151
or zero if not configured • For each encryption engine, the command displays the following: - EE slot number - SP state: see the appendix in the Admin Guide. - Current master key ID (if RKM is configured) or primary link key ID (if LKM is configured). - Alternate master key ID (if RKM is configured - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 152
on the same VLAN using the GbE Ports on the encryption switch or blade. The two GbE Ports of each member node (Eth0 and Ports (I/O sync links) with an IP address for the eth0 Ethernet interface, and also configure a gateway for these I/O sync links. Refer to the ipAddrSet help page for instructions - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 153
reside in the predetermined directory where certificates are stored. In the case of the HP SKM, this operand specifies the CA file, which is the certificate of the default. manual Enables manual failback. In this mode, failback must be initiated manually after an encryption switch or blade that - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 154
2 cryptoCfg --set -hbmisses value Sets the number of heartbeat misses allowed in a node that is part of an encryption group before the node is declared unreachable. This value is set in conjunction with the time-out value. It must be configured at the group leader node and is distributed to all - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 155
from a specified pass phrase. By default this command backs up the key to the attached key vaults, or optionally to a predetermined file on the switch. This command is valid only on the group leader. This command prompts for a pass phrase. passphrase Specifies the pass phrase for the master key - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 156
two encryption engines configured to host the CryptoTargets and to provide the active/standby failover and failback capabilities in a pair-wise relationship in performed without a commit operation will not survive across switch reboots, power cycles, CP failover, or HA reboots. 128 Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 157
leader on which this command is issued. This command fails if the member nodes' IP addresses for the GbE Ports (I/O sync ports) are not configured. The following operands are supported: HA_cluster_name Specifies the name for the HA cluster. The name can be up to 31 characters long and include - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 158
the WWN of the switch or chassis to which the encryption engine belongs. Specifies the encryption engine slot number on bladed systems. --replace is only valid on the group leader. The following operands are supported with the --replace command: -haclustermember HA_cluster_name Specifies the HA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 159
cryptoCfg 2 Function 4. Storage device configuration and management Synopsis cryptocfg --help -devicecfg cryptocfg --create -container disk | tape crypto_target_container_name EE_node_WWN [EE_slot_number] target_PWWN target_NWWN [-initiator initiator_PWWN initiator_NWWN [initiator_PWWN - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 160
target port hosted on a Brocade Encryption Switch or FS8-18 blade. more information. This command set supports the following tasks: 1. Configure permitted to access the targets), or manually initiate a failback of an encryption engine Fabric OS Encryption Administrator's Guide for a more comprehensive - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 161
WWN - Host PID: host PID - VI: virtual initiator port WWN - VI PID: virtual initiator PID - Number of LUNs - LUN number - LUN type: disk or tape - LUN serial number: - Encryption mode: encrypt or cleartext - Encryption format: (brocade) native or DF-compatible - Tape type - Encrypt existing data - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 162
defined - For each host: host port WWN, node WWN - For each VI: VI port WWN, node WWN - Number of or disabled • LUN state: See the appendix in the Admin Guide. • Encryption algorithm • Key ID state: Re-key • Key • Rekey role: primary, alternate • Block size • Number of block • Current logical block - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 163
or disabled - Rekey: enabled or disabled - Tape type - Key life: key lifespan in days - Volume/pool label - LUN state: Refer to the Admin Guide, Appendix - Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none - Compression algorithm - Key ID state - Key ID When used with -cfg the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 164
2 cryptoCfg • Target: PWWN, NWWN • VT: PWWN, NWWN • Number of hosts • Configuration status: committed or defined • For each host: - Host PWWN, NW - VI: PWWN, NWWN - VI PID • Number of LUNs • For each LUN: - LUN number - LUN type: tape or disk - LUN status - Encryption mode: encrypt or cleartext - - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 165
Displays one of the following: • Read Phase • Write Phase • HA Sync Phase • LUN Cleanup - Re-key role: Primary or Backup - Block Size - Current logical block address (LBA) being processed Use the --show -rekey crypto_target_container_name LUN_Num initiator_PWWN command to display all re-key sessions - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 166
one of the following: • Read Phase • Write Phase • HA Sync Phase • LUN Cleanup - VI PWWN - VI NWWN - VI PID - Number of blocks - Block size - Size of the LUN (in bytes) - Current logical block address (LBA) being processed - Re-Key Role: Primary Or Backup Use the --show -tape_sessions command to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 167
either as a 16-bit (2 bytes) number in hex notation (for example, 0x07) or as a 64-bit (8 bytes that has the access to the target port, one virtual initiator (VI) is must be zoned for NS-based frame redirection to take effect leader. The following operands are supported: disk | tape Specifies the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 168
is required. On bladed systems, include the slot number. target_PWWN Specifies the target port WWN of the device port hosted on the -container for a listing of valid CTC names. --failback -EE Performs a manual failback of all CTCs that were failed over earlier to another encryption engine within - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 169
Specifies the encryption engine to which the CTC should be moved. On bladed systems, specify the encryption engine's slot number. --add -initiator Adds additional initiators should be added. initiator_PWWN Specifies the initiator port WWN. initiator_NWWN Specifies the initiator node WWN. --rem - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 170
be 16-bit numbers in hex format. The Range parameter is not supported for 64-bit LUN LUNs exposed through multiple target ports and thus configured on multiple OS Encryption Administrator's Guide for more information. rare case for LUNS encrypted in Brocade native mode. However for LUNS encrypted - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 171
uses the Brocade metadata format to be present on the encryption switch or the chassis that houses the encryption blade. -encrypt | -cleartext Enables or Specifies the LUN number either as a 16-bit (2 bytes) number in hex notation (for example, 0x07) or as a 64-bit (8 bytes) number in WWN format - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 172
, refer to the Fabric OS Encryption Administrator's Guide. --rem -LUN Removes a LUN from a associated with the specified CTC. initiator_PWWN Specifies the initiator port WWN for the LUN to be removed. --enable This command must be executed on the local switch that is hosting the LUN. No commit is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 173
Guide initiator port size is 64 bytes. This operand is required. -encryption_format Optionally specifies the tape encryption format. Two encryption formats are supported for tape pools: native Data is encrypted or decrypted using the Brocade switch or on the chassis that houses the encryption blade - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 174
Guide for more information. [-encryption_format native | DF_compatible] [-encrypt | -cleartext] --manual_rekey Performs a manual re-keying of a specified LUN associated with a specified CTC. Manual are supported: crypto_target_container_name port WWN of the initiator for the specified LUN. - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 175
Performs a manual re-keying associated with the specified CTC. initiator_PWWN Specifies the initiator port WWN for the specified LUN. --discoverLUN Performs LUN command is valid on all nodes. The following operands are supported: -all -cfg Displays the configuration for all containers in - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 176
Crypto LUN configuration or runtime status information for a specified CTC. This command is valid on all nodes. The following operands are supported: crypto_target_container_name Specifies the CTC for which to display the Crypto LUN information. LUN_Num Specifies the number of the LUN for which - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 177
persistent across reboots and power cycles. This command overwrites to the Fabric OS Encryption Administrator's Guide. A. Node configuration To initialize a what is generated and where it is stored): SecurityAdmin:switch>cryptocfg --initnode This will overwrite all identification and authentication - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 178
.pem Password: To register a member node with the group leader: SecurityAdmin:switch>cryptocfg --reg -membernode 10:00:00:05:1e:39:14:00 enc_switch1_cert.pem 10.32.244.60 Operation succeeded. To deregister a member node: SecurityAdmin:switch> cryptocfg --dereg -membernode 10:00:00:05:1e:53:b6:80 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 179
To create an encryption group "brocade": SecurityAdmin:switch> cryptocfg --create -encgroup brocade Encryption group create status: Operation Succeeded. To delete the encryption group "brocade": SecurityAdmin:switch> cryptocfg --delete -encgroup brocade Encryption group create status: Operation - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 180
the RKM key vault: SecurityAdmin:switch>cryptocfg --exportmasterkey Enter the passphrase: passphrase Master key exported. Key ID: 8f:88:45:32:8e:bf:eb:44:c4:bc configuration: SecurityAdmin:switch>cryptocfg --show -groupcfg Encryption Group Name: brocade Failback mode: Manual Heartbeat misses: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 181
in HA fashion: SecurityAdmin:switch>cryptocfg --show -groupcfg Encryption Group Name: brocade Failback mode: Auto :1e:39:14:00 State: DEF_NODE_STATE_DISCOVERED Role: MemberNode IP Address: 10.32.244.60 Certificate: enc1_cpcert.pem Current Master Key State: Not configured Current - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 182
set the failback mode to manual failback: SecurityAdmin:switch> cryptocfg --set -failbackmode manual Set failback policy status: Operation Succeeded. To set with one encryption engine: SecurityAdmin:switch> cryptocfg --show -hacluster -all Encryption Group Name: brocade Number of HA Clusters: 1 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 183
cluster name: HAC2 - 1 EE entry Status: Defined WWN Slot Number 10:00:00:05:1e:39:53:67 0 Status Online To initiate a manual failback of an encryption engine: SecurityAdmin:switch> cryptocfg --failback -EE 10:00:00:05:1e:39:53:67 0 22:00:00:04:cf:6e:57:62 Operation Succeeded Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 184
:06:00:05:1e:41:9a:7e Permanent Port Name: 10:00:00:00:c9:2b:c9:3a Port Index: 6 Share Area: No Device Shared in Other AD: No Redirect: No The Local Name Server has 1 entry } FabricAdmin:switch>nscamshow nscamshow for remote switches: Switch entry for 2 state rev owner known v611 0xfffc01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 185
the LUNs seen by the initiators in the CryptoTarget container. FabricAdmin:switch>cryptocfg --discoverLUN my_disk_tgt Container name: my_disk_tgt Number of LUN(s): c6:4f 6. Add a LUN to the CTC with encryption enabled. FabricAdmin:switch>cryptocfg --add -LUN my_disk_tgt 0 10:00:00:00:c9:2b:c9: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 186
72:89:c6:4f Key creation time: Sun Jun 1 20:21:32 2008 Operation Succeeded 9. Display Crypto LUN configuration. FabricAdmin:switch>cryptocfg --show -LUN my_disk_tgt 0 10:00:00:00:c9:2b:c9 VT, VI and target, VI, VT. FabricAdmin:switch>cfgshow Defined configuration: cfg: itcfg itzone cfg: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 187
:06:2b:0f:72:6d F. Device configuration display commands To display the tape pool configuration: FabricAdmin:switch> cryptocfg --show -container -all -cfg Encryption group name: brocade Number of Container(s): 2 Container name: Type: EE node: EE slot: Target: VT: Number of host(s): Configuration - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 188
Fri May 16 02:03:48 2008 Key life: 3000 (minute) Rekey status: 0 Key expiration time: Sun May 18 04:03:48 2008 Operation Succeeded To display CryptoTarget container configuration information For a disk LUN with re-keying enabled: FabricAdmin:switch>cryptocfg -- - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 189
cryptoCfg 2 See Also To display all tape sessions in progress on the local node: FabricAdmin:switch>cryptocfg --show -tape_sessions -all Number of tape session(s): 2 Container name: apps92 EE node: 10:00:00:05:1e:43:ee:00 EE slot: 2 Target: 50: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 190
. Examples To display sample data streams you can use with diagnostics: switch:admin> datatypeshow Pattern type example BYTE_FILL WORD_FILL QUAD_FILL BYTE_NOT WORD_NOT QUAD_NOT BYTE_RAMP 01 02 05 0b 17 2f 5e bd 7b f6 ec d8 b0 60 c0 11 55 16 fc d7 17 65 a9 87 5f 44 be 5a d0 de bc a5 12 bc - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 191
or time to one switch is forwarded to the principal switch and distributed to the fabric. It may take up to 64 seconds for the switches in the fabric to time zone support. If the switch is operating in FICON Management Server mode (fmsmode), setting the date is subject to the director clock alert - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 192
2 date Examples See Also To display the current date and time and then modify it: switch:admin> date Fri Jan 29 17:01:48 UTC 2007 switch:admin> date "0227123007" Thu Feb 27 12:30:00 UTC 2007 errShow, ficonCupSet, ficonCupShow, portLogShow, tsClockServer, tsTimeZone, upTime 164 Fabric OS Command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 193
the debug and verbosity levels. Module names are case-sensitive. This operand is optional. Examples To display information about a specific module named NS: switch:admin> dbgshow NS Module NS, debug level = 1, verbose level = 1 See Also setDbg Fabric OS Command Reference 165 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 194
is activated, the following conditions apply: • If the current effective zone configuration is disabled with the cfgDisable command, the local switch remote switch that does not support default zoning, zoning rejects the cfgDisable command in the second phase of RCS because the remote switch does - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 195
defZone 2 Examples See Also --allaccess Sets the default zone access mode to All Access, initiates a zoning transaction (if one is not already in progress), and deletes the reserved zoning objects by performing the equivalent to the following zoning commands: cfgDelete "d_efault_Cfg" zoneDelete - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 196
is set to 0 and designed to operate on fixed-port-count products. -all If specified, all blades clear. If no operand is specified, the default is to clear all bad port flags. Examples To clear the diag software flag: switch:admin> diagclearerror 8 ERROR: DIAG CLEARERR Diagnostics Errors Cleared - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 197
diagDisablePost 2 diagDisablePost Disables power-on self-test (POST). Synopsis diagdisablepost Description Use "Command Availability" for details. Operands none Examples To disable the POST: switch:admin> diagdisablepost Config update Succeeded Diagnostic POST is now disabled. See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 198
2 diagEnablePost diagEnablePost Enables power-on self-test (POST) execution at next reboot. Synopsis A, "Command Availability" for details. Operands none Examples To enable the POST: switch:admin> diagenablepost Config update Succeeded Diagnostic POST is now enabled. See Also diagDisablePost - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 199
of the underlying hardware and are intended for support personnel only. Contact support if you want to use these operands. switch:admin> diaghelp bpportloopbacktest bpturboramtest burninerrclear burninerrshow burninstatus Functional test of port via blade processor path. MBIST test for AP blade - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 200
command to enable or disable Power-On-Self-Test) POST. The active as soon as this command is executed; it does not require a reboot to take effect. POST mode modifies the behavior of the diagnostics daemon program to inhibit testing of switch blades when the system is first powered on or a new blade - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 201
until the next execution of diagRetry. The mode becomes active as soon as this command is executed; it does mode modifies the behavior of the diagnostic test methods, power-on self-test (POST), and burn-in scripts. view the current retry mode value: switch:admin> diagretry -show Diagnostic Retry Mode - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 202
enters an interactive session. Using the full parameters, variables can be updated and stored in the configuration database for that blade type. This command does not require a reboot . Examples To display diagnostic command parameters: switch:admin> diagsetcycle switchburnin.sh -show CURRENT - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 203
in -uports displays. The default value is 0. Examples To display diagnostic status on a switch blade: switch:admin> diagshow Diagnostics Status: Fri Feb 08 15:25:24 2002 Slot: 1 UPORTS Port BPort Diag Active Speed ...... 0 15 OK UP 2G Auto ...... 1 14 OK UP 2G Auto ...... 2 13 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 204
the debug and verbosity levels. Module names are case-sensitive. This operand is optional. Examples To display information about a specific module named NS: switch:admin> dbgshow NS Module NS, debug level = 1, verbose level = 1 See Also setDbg 176 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 205
is a semicolon-separated list of one of the following: • switch domain IDs • switch names • switch WWNs A wildcard (*) may be specified to include all switches in the fabric that support the distribute feature. Switches running firmware earlier than v5.3. ignore the AUTH, FCS, and IPFILTER - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 206
Password database to all domains in the fabric that support the distribute feature: switch:admin> distribute -p "FCS;PWD" -d "*" To distribute the AUTH and FCS policies to all switches in the fabric that run v5.3.0 or later: switch:admin> distribute -p "AUTH;FCS" -d "*" To distribute the AUTH and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 207
change occurs. Refer to dlsSet for a full description of load sharing. This command should be "Command Availability" for details. DLS is not supported in certain routing policies. Refer to aptPolicy for sharing option: switch:admin> dlsreset Committing configuration...done. switch:admin> dlsshow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 208
is based on the incoming port and the destination domain. This means that all traffic coming in from a port ( setting. Notes DLS is not supported in certain routing policies. If supported, the DLS option is on by dynamic load sharing option: switch:admin> dlsset switch:admin> dlsshow DLS is set - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 209
dlsSet for a description of load sharing. Notes DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing Operands none Examples To display the current DLS option setting: switch:admin> dlsshow DLS is set See Also dlsSet, dlsReset Fabric OS Command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 210
A, "Command Availability" for details. Operands none Examples To set the DNS parameters for the system: switch:admin> dnsconfig Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration 3 Remove DNS configuration 4 Quit Select an item: (1..4) [4] 2 Enter Domain Name - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 211
enclosure interface to which the switch is attached. This command applies to products that are embedded in a blade server or storage chassis. Most options are platform-specific. Options that do not apply to a platform are identified with a "Not supported on - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 212
command to clear all internal and external error log messages for all switch instances on the CP where the command is executed. For products that error logs of the other processor. This command must be executed on the active CP. Note The execution of this command is subject to Virtual Fabric or - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 213
operand is optional. Examples To display the start and end delimiters: switch:admin> errdelimiterset delimiter start string: delimiter end string: See Also To change the start and end delimiters (with sample output): switch:admin> errdelimiterset -s "Start" -e "End" Start2003/03/10-09:54 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 214
Description Use this command to dump external error log messages. When executed without operands, this command prints all error messages for the logical switch context in which the command is executed. When used with the -a option, the command prints the error messages for the entire chassis. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 215
errDump 2 See Also 2008/08/25-11:35:04, [FABR-1001], 9041, CHASSIS, WARNING, Spir_67, port 0, incompatible Long distance mode. 2008/08/25-11:39:35, [LOG-1000], 9043, CHASSIS, INFO, Spir_67, Previous message repeated 1 time(s) [output truncated] errDelimiterSet, errFilterSet, errShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 216
to set a filter for an error log destination. A filter is set based on the severity level of the messages. If no parameters are specified, not case sensitive. Examples To display the current filter settings: switch:admin> errfilterset console: filter severity = WARNING See Also To set the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 217
" for details. Operands none Examples To display a list of all defined error log modules: switch:user> errmoduleshow Module IDs: 1 KT 2 UT 5 LOG 6 CDR 9 PIXE 10 EGR 4 KTRC 8 PISP 12 PIC 16 AUTH 20 CER 24 CONF See Also errDump, errShow Fabric OS Command Reference 189 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 218
this command to display external error log messages one at a time. When executed without operands, this command prints the error messages for the logical switch context in which the command is executed. When used with the -a option, the command prints the error messages for the entire chassis. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 219
errShow 2 See Also [Type to continue, Q to stop: 2008/08/25-11:35:04, [FABR-1001], 9041, CHASSIS, WARNING, Spir_67, port 0, incompatible Long distance mode. [Type to continue, Q to stop: 2008/08/25-11:39:35, [LOG-1000], 9043, CHASSIS, INFO, Spir_67, Previous message - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 220
. Telnet and rlogin connections are closed; the serial port returns to the login: prompt. The exit command is an accepted synonym for logout, as is typing Ctrl-D at the beginning of a line. Operands none Examples To exit from a shell session: switch:admin> exit Connection to host lost. See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 221
to the fabric, as well as a list of pending commands. The following information displays: Port The port number. State The state of the port: P0 Port Offline P1 Port Online P2 ELP ACC Received P3 Link Reset Done I0 Trunk Initiator: EMT Sent I1 Trunk Initiator: ETP ACC Received - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 222
nbrWWN Neighboring switch's WWN nbrPort Neighboring switch's port lr_tid bladed systems only, specifies the slot number of the port to display, followed by a slash (/). portnumber Specifies the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 223
Examples See Also To display fabric port information: switch:admin> fabportshow 4/14 Fabric Port Information Port: State: List: List Count: Flags: nbrWWN: nbrPort: lr_tid: red_ports: 10 11 62 63 62 P3 0x10068418 0 0x280120 10:00:00:60:69:80:06:cf 5 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 224
the retry count of the fabric commands. The SW_ISL (ISL ports) information displays the retry count for the following fabric commands: none Examples To display the retry count of Fabric OS commands: switch:user> fabretryshow SW_ILS E_Port ELP EFP HA_EFP DIA RDI BF FWD EMT ETP RAID GAID - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 225
of log entries. The specified size has to be at least 2 and a power of 2; otherwise, the command fails. Examples To display the fabric log: switch:admin> fabriclog -s Time Stamp Input and *Action S, P Sn,Pn Port Xid Wed Apr 6 01:08:52 2005 01:08:52.977 SCN Switch Offline A2,NA F2,NA NA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 226
the size of the fabric log: switch:admin> fabriclog -r 64 Warning: This command will clear the logs. Are your sure you want to do the resize [y/n]? y To display the cleared fabric log after the size was changed: See Also switch:admin> fabriclog -s Time Stamp Input and *Action S, P Sn,Pn Port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 227
--disable fabricprincipal [-f] mode Description Use this command to set principal switch selection mode for a switch and to set priorities for principal switch selection. The implementation of the fabricPrincipal command is based solely on mechanisms specified in the Fibre Channel standards. These - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 228
. Examples To enable a high fabric principle priority setting: switch:admin> fabricprincipal --enable -p 0xff -f Principal Selection Mode enabled (Activate in next fabric rebuild) To disable the principal mode selection: switch:admin> fabricprincipal --disable Principal Selection Mode disabled To - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 229
Switch ID The switch Domain_ID and embedded port D_ID. World Wide Name The switch WWN. Enet IP Addr The switch Ethernet IP address for IPv4 and IPv6 configured switches. For IPv6 switches is empty if the switch is not an FC Router or it the FC Router does not support it. Note The execution - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 230
192.168.65.180 >"sw180" 1080::8:800:200C:1234/64 2: fffc42 10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60" The Fabric has 2 switches. To show additional details of the FC Router, if present: switch:admin> fabricshow -m Switch ID Name ENET IP Addr FC Router FC Router - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 231
fabstatsshow Description Use this command to display the statistics for the fabric. The following information is displayed: • Number of times a switch domain ID has been forcibly changed • Number of E_Port offline transitions • Number of fabric reconfigurations • Number of fabric segmentations as - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 232
2 fabStatsShow Sec Incompatibility: 0 Sec Violation: 0 ECP Error: 0 Duplicate WWN: 0 Eport Isolated: 0 See Also fabRetryShow 204 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 233
Fabric Switch State Structure Information State: D0 Stage: warm done Rdi Receive Timer: 0x10069400, IDLE STATE Unconfirmed Sw Timer: 0x10069508, IDLE STATE NTP Timer: 0x100695b8, IDLE STATE ME Timer: 0x10069610, IDLE STATE Principal Domain: 2 Upstream Port: 64 Principal - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 234
RPM speed to 0. Notes This command is not available on non-bladed systems except for the Brocade 4100, 4900, and 5300. The execution of this command is subject the fan unit to disable. Examples To disable a fan unit: switch:admin> fandisable 1 Fan unit 1 has been disabled See Also fanEnable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 235
the default RPM speed. Notes This command is not available on non-bladed systems except for the Brocade 4100, 4900, and 5300. The execution of this command is the fan unit number to enable. Examples To enable a fan unit: switch:admin> fanenable 1 Fan unit 1 has been enabled See Also fanDisable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 236
case, the last known fan speed is displayed. The output from this command varies depending on switch type and number of fans present. Note This command is not available on non-bladed systems except for the Brocade 4100, 4900, and 5300. The execution of this command is subject to Virtual Fabric or - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 237
as reboot. Notes This command is not available on non-bladed systems except for the Brocade 4100 and 4900. The execution of this command is subject reboot the Control Processor without executing power-on self test (POST) on startup: switch:admin> fastboot See Also diagDisablePost, diagEnablePost - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 238
/FC license This command is supported only on the Brocade 7500 and on modular platforms with one or more Brocade FC-IP/FC Router blades (FR4-18i). When FC Fastwrite is enabled, GbE Ports are not allowed to be enabled on the blade. The blade comes up with GbE ports internally disabled. A maximum of - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 239
WARNING !!!! Disabling this feature requires power-cycling of the affected blade to take effect and may take up to 5 minutes to complete. Non-bladed switches will be rebooted. In all cases, data traffic on all the ports (FC and GbE) of the blade will be disrupted. Continue (Y,y,N,n): [ n] portCfg - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 240
Command Availability" for details. This command is supported only on Brocade FR4-18i blades and Brocade 7500 platforms. Operands This command has the include: 0 GbE port 0 1 GbE port 1 2 All GbE ports Examples To run all tests on slot 7 and GbE port 1: switch:admin> fcipchiptest --slot - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 241
fcipChipTest 2 Diagnostics When a failure is detected, the test might report one or more of the following error messages: CHIP_TEST_ERR CHIP_TEST_CHIP_INIT_ERR CHIP_TEST_IMAGE_VER_ERR CHIP_TEST_TIMEOUT_ERR CHIP_TEST_HEARBEAT_ERR CHIP_TEST_INVALID_RESULT See Also fcipPathTest Fabric OS Command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 242
details. Operands none Examples To display FCIP command information: switch:admin> fciphelp fastwritecfg portcfg portcmd portshow Configure FC fastwrite GigE port Execute commands (ping etc) on the GigE port Show configured ip interfaces/routes/arp entries or fcip tunnels on the GigE Port See - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 243
Availability" for details. This command is supported only on Brocade FR4-18i blades and Brocade 7500 platforms. Operands This command has The test progresses until the specified number of frames are transmitted on each port. The default value is 100. -length data_length Specifies the data length - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 244
is used. This setting is applicable only to path mode 1 and 2. Examples To run the test on slot 2 with PHY loopback sending 10 frames: switch:admin> fcippathtest --slot 2 -path 2 -nframes 10 Running fcippathtest Test Complete: fcippathtest Pass 10 of 10 Duration 0 hr, 1 min & 50 sec (0:1:50:942 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 245
:65:05:83:f9:39 Target Pid: 144e8 Number of LUNs returned by query: 1 LUN ID: 0x00 To display the LUN information of a list of port WWNs: switch:admin> fclunquery -w 20:00:00:04:cf:5d:cf:0e Target Index: 1 Target Node WWN: 20:00:00:04:cf:5d:cf:0e Target - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 246
Extended Link Service (ELS) Echo request to a pair of ports or to a single destination. fcping [--number frames][--length size][--interval a switch WWN, a domain ID, or a switch domain controller ID. No zoning check is performed when a single device is probed. The ELS Echo may not be supported on - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 247
to 16 "pad" bytes, which are used to fill out the request frame payload sent. This is useful for diagnosing data-dependent problems in the as a port WWN or a node WWN. When using fcPing to ping a single device, specify the destination as a switch WWN, a domain ID, or a switch domain controller - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 248
with a single destination (in this example, the destination is a switch WWN): switch:admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name 6: -5.20A9 DELL1750-3" Fabric Port Name: 20:05:00:05:1e:34:01:f5 Permanent Port Name: 20:07:00:05:1e:35:10:7f Port Index: 5 Share - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 249
fcPing 2 See Also switch:admin> fcping 20:00:00:00:c9:3f:7c:b8 Destination: 20:00:00:00:c9:3f:7c:b8 Pinging 20:00:00:00:c9: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 250
in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To clear the FCPD debug information log: switch:admin> fcplogclear See Also fcpLogDisable, fcpLogEnable, fcpLogShow 222 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 251
place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To disable the FCPD debug information log: switch:admin> fcplogdisable See Also fcpLogClear, fcpLogEnable, fcpLogShow Fabric OS Command Reference 223 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 252
place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To enable the FCPD debug information log: switch:admin> fcplogenable See Also fcpLogClear, fcpLogDisable, fcpLogShow 224 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 253
Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To display the FCPD debug information log: switch:admin> fcplogshow Time Stamp Event Port file&lineno arg0 arg1 arg2 arg3 arg4 08:20:12.274 FlshOrProbe 0 1 536 2 :0 :0 :0 :0 08:20:12.275 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 254
number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is required. Examples To display the FCP probe information: switch:admin> fcpprobeshow 4/4 port 52 is L-Port and it is online. nodes probed: 2 successful PLOGIs: 2 successful PRLIs - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 255
, followed by a slash (/). portnumber Specifies the port number to display, relative to its slot for bladed systems. Use switchShow for a listing of valid ports. This operand is required. Examples To display the FCP RLS information: switch:admin> fcprlsshow 2/5 0xda 0xdc link fail 0 0 loss - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 256
, this command displays the usage. By default, frame forward option is enabled. Use the --show option to display the current settings on the switch. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 257
To display the new configuration: switch:admin> fcrbcastconfig --show Broadcast configuration is disabled for: fid 2 fid 128 SEE ALSO bcastshow, portRouteShow fcrBcastConfig 2 Fabric OS Command Reference 229 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 258
for a 32-bit register supported only on Brocade FR4-18i blades and Brocade 7500 platforms. Operands This command has the following operands: --slot slotnumber Specifies the slot number on which the diagnostic operates. The default is 0 and operates on fixed-port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 259
fcrChipTest 2 Examples To run all tests on slot 7 and FC Router FPGA 1: switch:admin> fcrchiptest --slot 7 -unit 1 -testtype 0 Running fcrchiptest Test Complete: fcrchiptest Pass 1 of 1 Duration 0 hr, 0 min & 4 sec (0:0:4:351). passed. Diagnostics See Also When a failure is detected, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 260
fabric ID uniquely identifies a fabric in FC Router configurations. The backbone fabric is the fabric attached to the U_Ports-for example, E/F_Ports-of this switch. The backbone fabric ID must be unique across all FC Router-connected fabrics. The current Backbone Fabric ID can be displayed using the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 261
at the end of the line indicates that the EX_Port is a Remote Router Port. FID The fabric ID of the EX_Port. Neighbor Switch Info (WWN, enet IP, name) The WWN, Ethernet IP address, and switch name of the switch attached to the EX_Port. Note The execution of this command is subject to Virtual - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 262
:1e:37:12:f8 "Sprint_179" FC Router WWN: 10:00:00:05:1e:40:22:00, Dom ID: 2, Info: 10.32.66.220, 220::10:32:66:220 "sw220n" EX_Port FID Neighbor Switch Info (enet IP, WWN, name) 16 80 10.32.66.180 10:00:00:05:1e:34:e8:46 "b4100_7x_1" 180::10 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 263
based on a specified subset of LSANS. This feature improves scalability and performance related to LSAN zone size and the speed with which they are imported or exported. This command supports of eight LSAN enforce tags are configurable per FC router switch. • A speed tag is a flag to indicate to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 264
the FCR LSAN tag database. Examples To add an LSAN enforcement tag named "brocade": switch:admin> switchdisable switch:admin> fcrlsan --add -enforce brocade LSAN tag set successfully To add a speed tag named "mcdt": switch:admin> fcrlsan --add -speed mcdt LSAN tag set successfully To remove the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 265
a different maximum LSAN count on the switches throughout the meta-SAN, the device import or export will not be identical on the FCRs. You should therefore enter the same maximum LSAN count for all the FCR switches in the same backbone that support this feature. Verify the configured maximum limit - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 266
For FC Routers running Fabric OS versions prior to 6.1.0, the best practice is, therefore, to enter the same information for all the FCR switches in the backbone that support this command. This command is also used to specify FC Router pairs that can talk to each other. All edge fabrics connected to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 267
fcrLsanMatrix 2 • Display the information saved in the cache. • Clear the information from the cache and revert to the saved value. • Display the information that is saved in the persistent memory (CLI command with no option). • Display the static and default/dynamic binding of the backbone to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 268
the LSAN Zone static and default/dynamic binding in the backbone where online fabrics are: 1, 2, 4, 5, 7, 8, 10: switch:admin > fcrlsanmatrix --fabricview -lsan LSAN MATRIX is activated Fabric ID 1 Fabric ID 2 4 5 4 7 10 19 Default LSAN Matrix: 1 2 8 To display all proxy devices for - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 269
feature is not supported. • Use fcrlsanmatrix --fabricview -lsan | -fcr to confirm that all the switches in the backbone have the same LSAN and FCR binding matrix. If not, there are two solutions. The first solution is to modify one FCR or both to make them the same and then activate the FCRs. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 270
conflicting devices. Error message (2): "There may be other FCR switches in the backbone that do not support the LSAN Binding feature or do not have the same switches to confirm that the shared edge fabric FIDs have the same access in both backbones. Refer to the Fabric OS Message Reference manual - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 271
. An external cable is not required to run this test. The port LEDs flicker green rapidly while the test is running. The test method is as follows: 1. Set all ports present for parallel loopback. 2. Create a frame F of maximum data size (2,112 bytes). 3. Transmit frame F by way of the FC Router FPGA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 272
for details. This command is supported only on Brocade FR4-18i blades and Brocade 7500 platforms. The switch must be offline for this test . Check for a faulty SFP. Replace the SFP if necessary. DIAG-INIT The port failed to synchronize in the loopback mode requested. A cable, media, or ASIC - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 273
by a faulty SFP or indicate deeper problems in the main board or ASIC. Check for a faulty SFP. Replace the SFP if necessary. The specified port failed to transmit frames. This usually indicates an ASIC failure. Replace the blade or the switch. See Also fcrChipTest, portLoopbackTest Fabric OS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 274
attached to this FC Router's EX_Ports. The physical devices are listed by fabric. The -f and -w operands allow searching for physical devices based on fabric ID or port World Wide Name. "No device found" is displayed if there is no physical device information available at this FC Router. Each - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 275
fcrPhyDevShow 2 Examples To display the physical devices relevant to this FC Router: fcr:admin> fcrphydevshow Device WWN Physical Exists PID in Fabric 2 10:00:00:00:c9:2b:6a:68 c70000 3 50:05:07:65:05:84:09:0e 0100ef 3 50:05:07:65:05:84:0b:83 0100e8 Total devices displayed: 3 See - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 276
fabric. If no operand is specified, the command displays the following information: importedFID The imported fabric ID of the proxy device. devWWN The port World Wide Name of the device. Slot The slot used for the device WWN. The device WWN-to-slot association is persistently stored. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 277
the specified edge fabric. Examples To display the persistent proxy device configuration: switch:admin> fcrproxyconfig Imported FID 002 002 002 002 003 Device WWN 50 00:11:22:33:44:55:66:77 from its persistent slot in fabric 5: switch:admin> fcrproxyconfig -r 5 00:11:22:33:44:55:66:77 WWN deleted - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 278
Router (devices imported by this FC Router). The proxy devices are listed by fabric. Search parameters -f and -w allow searching for proxy devices based on fabric ID or port WWN. "No proxy device found" is displayed if there is no proxy device information available on this FC Router. This command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 279
devices in the specified fabric that are relevant to this FC Router. Displays proxy devices with the specified port WWN. Examples To display the physical devices relevant to this FC Router: switch:admin> fcrphydevshow Device WWN Physical Exists PID in Fabric 2 10:00:00:00:c9:2b:6a:68 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 280
is persistently stored. If the switch is disabled, phantom port WWNs are not returned to the pool until the system reboots, because the phantom switch might still be accessible through other switches. Across the switch reboot, the allocation starts from the next usable WWN base from the pool and not - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 281
resource usage for the local FC Router: switch:Admin> fcrresourceshow Daemon Limits: LSAN Zones: WWN: WWN Pool Size Allocated 8192 3790 32768 6446 Port Limits: Max proxy devices: 2000 Max NR_Ports: 1000 Currently Used(column 1: proxy, column 2: NR_Ports): 48 | 0 0 49 | 0 0 50 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 282
value based on link type (EX/VEX). The router module chooses the router port path based on port is disabled. Valid values for cost are 0, 1000 or 10000. Examples To display the cost of all EX_Ports: switch:admin> fcrrouterportcost Port Cost 7/3 1000 7/4 1000 7/9 1000 7/10 1000 7/16 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 283
EX_Port and display the result: switch:admin> fcrrouterportcost 7/10 10000 switch:admin> fcrrouterportcost 7/10 Port Cost 7/10 10000 To set the default cost on the EX_port: switch:admin> fcrrouterportcost 7/10 0 switch:admin> fcrrouterportcost 7/10 Port Cost 7/10 1000 See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 284
meta-SAN. There are FC Router ports that reside on the backbone fabric. These ports are port IDs relevant to the backbone fabric. Because cascaded backbone/intermediate fabrics are currently not supported the Principal Switch in the Dest. Fabric The World Wide Name of the principal switch in the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 285
domain ID when the translate domain is not active and is persistently saved. The principal switch attempts to provide the translate domain with the requested issued on the switches to which the edge fabrics are directly attached. In a Virtual Fabric environment, this is the base switch. Fabric OS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 286
When persistxd is enabled, the translate domain is created based on the persistent translate domain ID configuration. If a the translate domain configuration and the state of the persistxd parameter: switch:admin> fcrxlateconfig ImportedFid ExportedFid Domain 001 002 004 001 005 003 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 287
To set the preferred domain ID of the translate domain created in fabric 2, which represents the remote fabric 3, to a value of 8: switch:admin> fcrxlateconfig 2 3 8 xlate domain already configured, overwrite?(n) y To clear the preferred domain ID of the translate domain created in fabric 2, which - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 288
blocked in "mixed fabrics" that include switches running firmware versions earlier than v6.0. If a v5.3/5.2 switch joins a fabric that has a of FCS consistency policy is possible in mixed fabrics. However, switches that do not support the policies ignore them. Note The execution of this command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 289
form "SCC:S;DCC;FCS". To set the fabric-wide policy to NULL (default) or no fabric-wide consistency, use the policy Set "". Supported policies are Switch Connection Control (SCC), Device Connection Control (DCC), and Fabric Configuration Server (FCS). All members specified in a given policy set are - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 290
by the World Wide Name of the switch. For HBAs, only the HBA identifiers and registered port lists are displayed. No detailed HBA attributes are displayed. For registered ports, only port identifier and corresponding HBA are shown; no detailed port attributes are displayed. Note The execution of - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 291
on a local switch: switch:admin> fdmishow Local HBA database contains: 10:00:00:00:c9:25:9b:96 Ports: 1 10:00:00:00:c9:25:9b:96 Port attributes: FC4 Types: 0x0001000001000000000000000000000000000000000000000000000000000000 Supported Speed: 0x00000001 Port Speed: 0x00000001 Frame Size: 0x00000800 HBA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 292
" entries are not removed from the RNID database. Examples To clear the RLIR database: switch:user> ficonclear RLIR successfully clear local RLIR Database. To clear the RNID database: switch:user> ficonclear RNID successfully clear not current entries from local RNID Database. See Also ficonHelp - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 293
-CUP (Control Unit Port) parameters for a switch. All parameters can be set while the switch Active=saved mode DCAM Director clock alert mode ACP Alternate control prohibited HCP Host control prohibited MIHPTO seconds Sets the missing interrupt handler primary timeout (MIHPTO) value for the CUP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 294
2 ficonCupSet To set the ASM bit in the mode register for the switch: switch:admin> ficoncupset modereg ASM 1 Active=Saved Mode bit is set to 1 See Also To set the MIHPTO value to 60 seconds: switch:admin> ficoncupset MIHPTO 60 MIHPTO has been changed to 60 seconds ficonCupShow 266 Fabric OS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 295
ASM Active=saved mode DCAM Director clock alert mode ACP Alternate control prohibited HCP Host control prohibited MIHPTO Displays the FICON-CUP missing interrupt handler primary timeout (MIHPTO) value in seconds. Examples To display the FMS mode for the switch: switch:user> ficoncupshow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 296
2 ficonCupShow To display the ASM bit in the mode register for the switch: switch:user> ficoncupshow modereg ASM ASM --1 See Also To display the MIHPTO value for the CUP: switch:user> ficoncupshow MIHPTO MIHPTO for the CUP: 60 seconds ficoncupset 268 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 297
ficonhelp Description Use this command to display a list of FICON support commands with descriptions. Note The execution of this command is database ficoncupset Sets FICON-CUP parameters for a switch ficoncupshow Displays FICON-CUP parameters for a switch ficonhelp N/A ficonshow Displays - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 298
storage port for the RNID switch for RLIR is not valid. 0x50 Indicates the node ID of the channel port is not valid. Fmt Displays the record-registration format. FRU Failure Description Indicates the FRU failure type as one of the following: WWN card [unit number] The WWN card. Power Supply - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 299
the node type for the switch in three bytes, 0xAABBCC: Byte AA 0x20 FC-SB-2 and updates. Byte BB 0x0a Switch. Byte CC 0x00 Port number. It is dynamically 4s including FCP and updates. 0x80 FC-4 support not specified. 0xa0 Reserved. 0xc0 Reserved. Fabric OS Command Reference 271 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 300
for a channel port. 0x07 Terminal - Full screen if it is a storage port; otherwise, a reserved field for a channel port. 0x08 Terminal - Line mode if it is a storage port; otherwise, an emulated control unit support only. 0x09 Reserved. 0x10 Switch, if it is a switch device; otherwise, reserved - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 301
the named database are displayed. Examples To display the local RNID database: switch:admin> ficonshow RNID { {Fmt Type PID Registered Port WWN Registered Node WWN flag Parm 0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca 0x10 0x200110 Type number: 002064 Model number: 101 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 302
: 02 Sequence Number: 0000000169CA tag: 052e } } To display the local and remote LIRR database: switch:admin> ficonshow LIRR fabric {Fmt Type PID Listener Port WWN Switch Port WWN Listener Type 0x18 N 502b00 50:05:07:64:01:00:15:8d 20:2b:00:60:69:80:1e:4e Conditional 0x18 N 502e00 50:05 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 303
number: FRU serial number: 23000000602 FL2L0001071 {Listener Port Type Listener PID Listener Port WWN N 0x502b00 50:05:07:64:01:00:15:8d } } {FRU Failure [3]: Power Supply[4] failure occurred on Mon Jan 13 12:11:38 2003 Fmt Protocol Domain Fabric WWN Switch WWN 0x18 FICON 80 10:00:00:60 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 304
. Power-up self tests are executed when the switch is powered on to check for the consistency of the algorithms implemented on the switch. Notes Certain services and . FIPS is not supported on all platforms. For FIPS-compliant hardware, refer to the Fabric OS Administrator's Guide. In a Virtual - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 305
/None To verify FIPS prerequisites: switch:admin>fipscfg --verify fips Standby firmware supports FIPS SELF tests check has passed Telnet port number for the policy is in permit state. HTTP port number for the policy is in permit state. RPC port number < - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 306
2 fipsCfg To enable FIPS after prerequisites have been met: switch:admin> fipscfg --enable fips FIPS mode has been set to : Enabled Please reboot the system switch:admin> fipscfg --show FIPS mode is : Enabled See Also none 278 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 307
both partitions of the CP to an updated version of the firmware. This must be done after each firmware download and after the switch has been rebooted and a sanity check is performed to make sure the new image is fine. For switches that have nonvolatile memory set into two equal partitions, the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 308
-e ] pfile Description Use this command to download switch firmware from an FTP or SSH server or local NFS directory to nonvolatile storage. Switch firmware can also be downloaded from an external USB device on platforms that support USB. The new firmware is downloaded in the form of RPM packages - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 309
must be attached to the active CP. When downloading firmware from a USB device, the -p option is ignored. -s Enables single-CP mode. This mode supports selectively enabling or disabling a full install, auto reboot, and auto commit on bladed and non-bladed systems. On enterprise-class platforms - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 310
supported in the fabric or the protocol fails. Using this option may cause traffic disruption for some switches in the fabric. Examples To download the firmware to an HA switch over a network: switch both CPs and all BP blade above. If you want to upgrade will cause the active CP to reset and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 311
This command will upgrade the firmware on both CP blades. If you want to upgrade firmware on a single CP only, active CP, but will require that existing telnet, secure telnet or SSH sessions sessions be restarted. To download SAS firmware interactively: switch:admin> firmwaredownload Type of Firmware - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 312
SSH service is not running on host. • The platform is not supported by the firmware indicated. • The USB device may not be plugged in correctly. On standalone switches, the device must be plugged into the switch USB port. On enterprise-class platforms, the USB device must be plugged into the Active - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 313
CP) cards, you can only run this command on the active CP. When downloading FOS, the event logs in the two CPs are synchronized image to the blades in slot 2 and 7. switch:admin> firmwaredownloadstatus [1]: Thu Jul 28 00:30:49 2007 Slot 2 (SAS): Firmware is being downloaded to the blade. It may take - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 314
(FR4-18i): Firmware is being downloaded to the blade. This step may take up to 10 minutes. [6]: Mon Dec 19 18:48:50 2007 Slot 5 (CP0, active): Forced failover succeeded. New Active CP is running new firmware [7]: Mon Dec 19 18:48:57 2007 Slot 5 (CP0, active): Firmware is being download to standby CP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 315
Slot 8 (FR4-18i): Firmware commit has started on the blade. This may take up to 10 minutes. [10]: Mon Dec 19 18:50:51 2007 Slot 8 (FR4-18i): The commit operation has completed successfully. [11]: Mon Dec 19 18:55:39 2007 Slot 5 (CP0, active): Firmware has been downloaded successfully on Standby CP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 316
enable Signed Firmware Download. If Signed Firmware Download is enabled, and if the validation succeeds, firmware download proceeds normally. If the firmware is not signed or if the signature validation fails, signed firmware download fails. Refer to the Fabric OS Administrator's Guide for complete - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 317
, or, if the switch supports this option, from an attached USB device. A default firmware key is released as part of the firmware image and is downloaded to the switch during the firmware download process. The default key is used to download new firmware. However, the firmware key may be change - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 318
name for FTP or SSH server access. This operand can be omitted, if the firmware key is accessible on a local directory or by anonymous FTP server access. A user key from an external USB device: switch:admin>firmwarekeyupdate -U /usb/usbstorage/brocade/firmwarekey/pubkey.pem Updating the public key - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 319
firmware image: switch:admin> firmwarerestore Restore old image to be active ... Restore both primary and secondary image after reboot. The system is going down for reboot NOW !! Broadcast message from root (ttyS0) Fri Oct 26 23:48:54 2001... Doing firmwarecommit now. Please wait ... See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 320
Availability" for details. Operands none Examples To display the firmware versions in a Brocade director with FA4-18 blades installed in slot 2 and 7: switch:admin> firmwareshow Slot Name Appl Primary/Secondary Versions Status 2 FA4-16 FOS v6.1.1 v6.1.1 SAS v3.0.0 v3.0.0 DMM v3 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 321
operating status of features on a switch. This command can be run while the switch is online. The following features are supported (refer to the Notes for limitations): • FC Routing service (see fcrConfigure) • iSCSI service (see iscsiCfg) • iSNS client service (see isnscCfg) • Virtual Fabrics (see - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 322
when this command was issued. Take these ports offline and try the command again. "FC Routing service is already disabled" -This means that the FC Routing service is already disabled. Disables the iSCSI service on the switch. Disables the iSNSC service on the switch. Disables Virtual Fabrics on the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 323
vf WARNING: This is a disruptive operation that requires a reboot to take effect. All EX ports will be disabled upon reboot. Would you like to continue [Y/N]y To disable Virtual Fabrics: switch:admin> fosconfig --disable vf WARNING: This is a disruptive operation that requires a reboot to take - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 324
supported value, specifying the replacement of the WWN card. Examples To replace the World Wide Name card: switch to a power cycle, or CP failover, please follow the recovery procedure in Core Switch WWN Card the frureplace command and follow the instructions to complete the operation. Please enter - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 325
confirmed. Bit map of all the ISL. Bit positions correspond to the default areas of the ports. Bit 0 refers to default area of the switch, bit 1 refers to default area 1, and so forth. Bit map of all the trunk slave ports. Bit map of all the Fx_Ports. Bit map of all the segmented - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 326
2 fspfShow Examples To display FSPF protocol information: switch:admin> fspfshow version = 2 domainID = 131 switchOnline = TRUE domainValid = TRUE isl_ports[0] = 0x00000000 isl_ports[1] = 0x74000000 trunk_ports[0] = 0x00000000 trunk_ports[1] = 0x02000000 f_ports[0] = 0x00400000 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 327
value is 0 (alarms deactivated). This operand is optional. Examples To enable alarms in Fabric Watch: switch:admin> fwalarmsfilterset FW: Alarms are already disabled switch:admin> fwalarmsfilterset 1 FW: Alarms are already enabled See Also fwAlarmsFilterShow Fabric OS Command Reference 299 53 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 328
Availability" for details. Operands none Examples To display the status of alarm filtering in Fabric Watch: switch:user> fwalarmsfiltershow FW: Alarms are enabled switch:user> fwalarmsfiltershow FW: Alarms are disabled See Also fwAlarmsFilterSet 300 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 329
Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To initialize all classes under Fabric Watch: switch:admin> fwclassinit fwClassInit: Fabric Watch is updating... fwClassInit: Fabric Watch has been updated. See Also fwConfigReload, fwConfigure, fwShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 330
the Fabric Watch configuration. This command should only be used after downloading a new Fabric Watch configuration file from a host. Notes This none Examples To reload the saved Fabric Watch configuration: switch:admin> fwconfigreload fwConfigReload: Fabric Watch configuration reloaded See - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 331
restrictions apply: 1. The Port class does not support VE _Ports and VEX_Ports, except for State Changes. 2. The E_Port class has the same port limitations as the port class except under the following condition: On a Brocade 48000 with a FR4-18i blade, or on the Brocade 7500, the E_Port class - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 332
) Invalid CRCS E_Port) RX Performance (E_Port) TX Performance (E_Port) State Changes (E/VE_Port) Utilization (VE_Port) Packet Loss (VE_Port) Same as Port class Invalid CRCS Invalid CRCS RX Performance TX Performance Customer Defined Telnet Violations HTTP Violations API Violations RSNMP Violations - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 333
FL_Port (Copper) class is supported only on Embedded platforms. . TABLE 14 Class Access Gateway mode Area Environmental SFP Port Fabric FFL_Port (Optical FFL_Port (Copper) Resource class EE Performance Monitor Filter Performance Monitor Resource Temperature Fan* Power Supply* Temperature RXP TXP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 334
=> : (1..5) [5] To disable all thresholds associated with port 1: switch:admin> fwConfigure --disable --port 1 To configure thresholds in Access Gateway mode: switch:admin> fwconfigure 1 : Environment class 2 : SFP class 3 : Port class 4 : F/FL Port (Optical) class 5 : Resource class 6 : quit 306 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 335
fwConfigure 2 Select a class => : (1..6) [6] 1 1 : Temperature 2 : Fan 3 : Power Supply 4 : return to previous page Select an area => : (1..4) [4] 1 Index ThresholdName Status CurVal LastEvent LasteventTime LastVal LastState 1 envTemp001 enabled 23 C inBetween Sat Oct7 10:01:53 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 336
and actions. Based on these switch:admin> fwfrucfg The current FRU configuration: Alarm State Alarm Action Slot 0 1 Power 16 Configurable Alarm Actions are: Errlog-1, E-mail-16 Slot Alarm State: (0..31) [0] 3 Slot Alarm Action: (0..17) [1] Power Supply Alarm State: (0..31) [0] Power - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 337
Set boundary & alarm level to default Show thresholds monitored and port persistence time Display sensor readings Set policy parameters for overall switch status Print policy parameters for overall switch status Print overall switch status Print temperature readings See Also none Fabric OS Command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 338
email alert in the switch. Switch elements monitored by Fabric Watch are divided into classes, and email alerts are based on the classes. Each 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class 7 : Alpa Performance Monitor class 8 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 339
Host IP Configuration 7 : Quit Select an item => : (1..7) [7]5 Mail Config Menu 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class 7 : Alpa Performance Monitor class 8 : End-to-End Performance Monitor class 9 : Filter Performance - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 340
and IPv6 addresses. The overall status is calculated based on the following contributors: Port Errors: LFA Number of link loss occurrences exceeded limit Fabric Watch license. Port errors are not supported for virtual ports and SFP errors are not applicable for virtual ports. The execution of - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 341
entries are: h Report based on all healthy ports m Report based on all marginal ports f Report based on all faulty ports o Report based on all offline ports If no option is specified, all ports are displayed. Examples To retrieve a port detailed report for a switch configured with an IPv6 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 342
See Also To retrieve a port detailed report: switch:user> fwportdetailshow --s h Port Detail Report Switch Name: switch IP address: 192.168.163.237 Port Exception report [by Healthy] Report time: 05/21/2007 11:22:58 PM --------Port-Errors SFP-Errors---- Port# Type State Dur(H:M) LFA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 343
SAM report on an eighty-port switch: switch:user> fwsamshow Total Total Down Total Port Type Up Time Down Time 100 12 U 0 0 0 100 13 U 0 0 0 100 14 U 0 0 0 100 15 U 0 0 0 100 16 F 100 0 0 0 17 F 100 0 0 0 18 F 100 0 0 0 19 F 100 0 0 0 20 U - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 344
fwSamShow 30 U 0 0 0 100 31 U 0 0 0 100 32 U 0 0 0 100 33 U 0 0 0 100 34 U 0 100 46 U 0 0 0 100 47 U 0 0 0 100 48 U 0 0 0 100 49 U 0 0 0 100 50 U 0 100 62 U 0 0 0 100 63 U 0 0 0 100 64 U 0 0 0 100 65 U 0 0 0 100 66 U - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 345
--persistence seconds Specifies the time, in seconds, during which a port must be persistently in a marginal state before being recognized as such. Examples To set the port persistence time to 18 seconds: switch:user> fwset --port --persistence 18 See Also fwShow Fabric OS Command Reference 317 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 346
specific configuration procedures, refer to the Fabric Watch Administrator's Guide. Notes This command requires a Fabric Watch license. The been modified.) switch:admin> fwconfigure 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 347
Temperature 2 : Fan 3 : Power Supply 4 : return to Thu Feb 14 01:21:36 2008 30 C In_Range 6 envTemp006 enabled 32 C inBetween Thu Feb 14 01:21:36 2008 31 C In_Range 1 5 : change custom time base 15 : change inBetween alarm 6 : change custom low 16 : apply threshold alarm changes - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 348
2 fwSetToCustom 8 : change custom buffer 18 : return to previous page 9 : apply threshold boundary changes 10 : cancel threshold boundary changes Select choice => : (1..18) [18] See Also fwSetToDefault, fwConfigure, fwHelp, fwShow 320 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 349
specific configuration procedures, refer to the Fabric Watch Administrator's Guide. Notes This command requires a Fabric Watch license. The been modified.) switch:admin> fwconfigure 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class 6 : F/FL Port (Optical) class - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 350
fwSetToDefault 3 : Power Supply 4 : inBetween Thu Feb 14 01:21:36 2008 30 C In_Range 6 envTemp006 enabled 32 C inBetween Thu Feb 14 01:21:36 2008 31 C In_Range 1 : alarm 5 : change custom time base 15 : change inBetween alarm 6 : change custom low 16 : apply threshold alarm changes 7 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 351
10 : cancel threshold boundary changes Select choice => : (1..18) [18] See Also fwSetToCustom, fwConfigure, fwHelp, fwShow fwSetToDefault 2 Fabric OS Command Reference 323 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 352
's Guide. In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper) class threshold is supported only for a fan in the SFP class: switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold information 3 : Show port persistence time 4 : Quit Select an - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 353
3 : Power Supply 4 : return to previous page Select an area => : (1..4) [4] 2 Name Label Last value envFan001 Env Fan 1 2576 RPM envFan002 Env Fan 2 2518 RPM envFan003 Env Fan 3 2481 RPM switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold information 3 : Show port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 354
last at 16:30:23 on 12/09/2011 Callbacks: No callbacks are registered. To show port persistence time: switch:admin> fwshow --port --persistence FW: current port persistence time = 18s To display ports that have all thresholds disabled: switch:user> fwShow --disable --port Port Threshold Status - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 355
commands typed into the shell; the oldest commands are replaced as new ones are entered. Operands none Examples To display previous shell commands: switch:admin> h 1 version 2 switchshow 3 portdisable 2 4 portenable 2 5 switchshow See Also none Fabric OS Command Reference 327 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 356
2 haDisable haDisable Disables the High Availability feature. Synopsis hadisable Description Use this command to disable the High Availability (HA) feature on a switch. If the HA feature is already disabled, this command does nothing. Note The execution of this command is subject to Virtual - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 357
running, but the background health diagnostic has discovered a problem with the blade. The logs should be checked to determine the appropriate would be disruptive. • IP and Fibre Channel addresses configured for the switch. • Additional internal HA state information, subject to change. Note The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 358
view information about the High Availability feature status: switch:admin> hadump Local CP (Slot 6, CP1): Active, Cold Recovered Remote CP (Slot 5, CP0): Standby, Healthy HA enabled, Heartbeat Up, HA State synchronized SWITCH Ethernet IP Address: 10.32.227.64 Ethernet Subnetmask: 255.255.240.0 Fibre - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 359
haEnable 2 haEnable Enables the High Availability feature. Synopsis haenable Description Use this command to enable the High Availability (HA) feature on a switch. If the HA feature is already enabled, this command does nothing. Note The execution of this command is subject to Virtual Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 360
in sync, the port traffic light does not flash during the failover, even while traffic is continuing to flow. This command is supported only on dual force the failover of the active CP to the standby CP in the switch: switch:admin> hafailover Local CP (Slot 7, CP1): Active, Warm Recovered Remote CP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 361
but the background health diagnostic has discovered a problem with the blade. Check the logs to determine the appropriate supported on non-bladed systems. Slot numbers for CP1 and CP0 vary depending on the hardware platform. On the Brocade 48000, CP0 is in slot 5 and CP1 is in slot 6. On the Brocade - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 362
fail, severity: CRITICAL HA enabled, Heartbeat Up, HA State not in sync To display CP status on a Brocade DCX with a healthy standby CP: switch:admin> hashow Local CP (Slot 7, CP1) : Active Remote CP (Slot 6, CP0) : Standby, Healthy HA Enabled, Heartbeat Up, HA State Synchronized See Also haDisable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 363
to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Examples To enable the HA state synchronization: switch:admin> hasyncstart HA State synchronization has started See Also haFailover, haShow, haSyncStop Fabric OS Command Reference 335 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 364
in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To disable the HA state synchronizing process: switch:admin> hasyncstop See Also haFailover, haShow, haSyncStart 336 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 365
command Specify the command name, with or without quotation marks. This operand is optional. Examples To display help information for the help command: switch:admin> help help See Also diagHelp, fwHelp, licenseHelp, perfHelp, routeHelp, zoneHelp Fabric OS Command Reference 337 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 366
FAN, POWER SUPPLY, WWN (WWN card), or UNKNOWN. On enterprise-class platforms: CHASSIS, FAN, POWER SUPPLY, SW BLADE (port blade), CP BLADE ( size of the history log depends on the HW platform. The Brocade 48000 director supports 100 history log entries. The Brocade DCX supports a maximum log size - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 367
size of the history buffer depends on the HW platform: The Brocade 48000 Director supports 100 history log entries. The Brocade DCX backbone supports a maximum log size To display the mode of the history log: switch:admin> historymode History Mode is: Rotating. See Also historyLastShow, historyShow Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 368
FAN, POWER SUPPLY, WWN (WWN card), or UNKNOWN. On enterprise-class platforms: CHASSIS, FAN, POWER SUPPLY, SW BLADE (port blade), CP BLADE ( size of the history buffer depends on the HW platform. The Brocade 48000 director supports 100 history log entries. The Brocade DCX supports a maximum log size - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 369
13:53:40 2001 Factory Part Number: 60-0001532-03 Factory Serial Number: 1013456800 CP BLADE Slot 6 Inserted at Tue Aug 14 13:59:50 2001 Factory Part Number: 60-0001604-02 Factory Serial Number: FP00X600128 POWER SUPPLY Unit 2 Inserted at Tue Aug 14 15:52:10 2001 Factory Part Number: 60 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 370
Web. Synopsis httpcfgshow Description Use this command to display the version of the Java plug-in supported by Web Tools. This command also displays the URL from which the plug-in can be downloaded. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 371
on the local switch. One line is displayed per process. Fields displayed with this command include those shown in Table 16. TABLE 16 Command field Nice value used in priority computation Memory address of the process The total size of the process in virtual memory, in pages The address of an - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 372
the following operand: processID Specifies the process name or process ID for the process to display. Examples To display information about process ID 433: switch:admin> i 433 F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD 000 S 0 433 1 0 69 0 - 1283 5c64 ? 00:00:02 fabricd See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 373
command enables or disables the ICL by enabling or disabling the ports associated with the link. Persistently disabled ports remain disabled across reboots and power cycles. This command is supported only on the Brocade DCX and the Brocade DCX-S4. Notes The execution of this command is subject to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 374
2 iclCfg See also To enable the ICL for ports 16-31 persistently: switch:user> iclcfg --persistentdnable 8/1 none 346 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 375
on a Brocade DCX or a DCX-S4 CP, valid interfaces are eth0 and eth3. On all other platforms, only eth0 is supported. Examples To advertise all modes of operation, when not entering this command through the serial console port, follow this scenario for the ifModeSet command: switch:admin> ifmodeset - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 376
auto-negotiation to 10 Mbps half-duplex operation, when entering this command through the serial console port: switch:admin> ifmodeset eth0 Auto-negotiate (yes, y, no, n): [yes] n Force 100 Mbps / Full Duplex (yes, y, no, n): [no] n Force 100 Mbps / Half Duplex (yes, y, no, n): [no] n Force 10 Mbps - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 377
value eth3 is valid only on the CP of a Brocade DCX or DCX-4S. bond0 Displays the active Ethernet port. This operand is valid only on the CP of for the eth3 Ethernet interface (in this example, the management port is disconnected): switch:admin> ifmodeshow eth3 Link mode: no link MAC Address: 00 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 378
2 ifModeShow To display the active interface: ras010:root> ifmodeshow bond0 Currently Active Slave: eth0 See Also ifModeSet 350 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 379
(IDB). • The neighbor data structure. This data structure is allocated when a switch port becomes an E_Port. The neighbor data structure contains all the information relating to the switch that is connected to an adjacent switch. This command displays the content of both data structures, if they - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 380
2 interfaceShow nghbId idbNo Domain ID of the neighbor (adjacent) switch. IDB number. Should be equal to port_number. remPort Port number on the remote switch connected to this port. nflags Internal FSPF flags. initCount Number of times this neighbor was initialized without the interface - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 381
to its slot for bladed systems. Use switchShow for a list of valid ports. This operand is optional; if omitted, the interface information for all ports is displayed. When invoked without operands, this command displays the interface information for all ports on the switch (including non-E_Ports - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 382
2 interfaceShow delay = 1 lastScn = 16 &dbRetransList = 0x1008c6a0 &lsrRetransList = 0x1008c6c4 &lsrAckList = 0x1008c6e8 inactTID = 0x1008c768 helloTID = 0x1008c7a0 dbRtxTID = 0x1008c7d8 lsrRtxTID = 0x1008c848 inactTo = 80000 helloTo = 2000 rXmitTo = 5000 nCmdAcc = 7 nInvCmd - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 383
with McDATA switches within a Brocade fabric. Fabric OS v6.0.0 introduced a McDATA Enterprise OS (M-EOS)-compatible McDATA Open Fabric Mode (interopMode 3) on all platforms that support McDATA Fabric Mode (interopMode 2). Open Fabric Mode is intended specifically for adding Fabric OS-based products - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 384
mode is turned on, the OUI portion of the switch WWN is no longer replaced with a McDATA OUI. The Brocade OUI is used. However, upgrading from Fabric OS on supported hardware platforms and procedures regarding OS v5.2.1_NI to v6.x migration, refer to the Fabric OS Administrator's Guide. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 385
take effect. Do you want to continue? (yes, y, no, n): [no] y To enable McDATA Open Fabric mode on a disabled switch: switch:admin> interopmode 3 McDATA Open Fabric mode is enabled The switch effective configuration will be lost. The system will reboot to allow the change to take effect. Do you want - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 386
to default values (-1). This command resets IOD delay values for a specified domain ID that was previously configured with the iodDelaySet command. The switch must be disabled before IOD delay can be reset. Notes The iodDelaySet command is deprecated in Fabric OS v6.2.0. The iodDelayReset command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 387
for all domains in the fabric. Examples To Display the IOD delay setting for domain 5: switch:user> ioddelayshow 5 omain - Iod Delay 5 - 20 To display IOD settings for all domains in the fabric: switch:user> ioddelayshow 5 omain - Iod Delay (ms) 1- 2 5 - 20 10 - 20 20 - 30 21 - 23 See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 388
in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To disable IOD enforcement: switch:admin> iodreset switch:admin> iodshow IOD is not set See Also iodSet, iodShow 360 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 389
DLS is supported only on the Brocade DCX, DCX-4S with 8 G blades (Condor2), and on the Brocade 5300 and 5100. All other platforms continue to enforce the legacy IOD implementation. Lossless DLS is supported only in FICON environments, and the switch must be configured with a port-based policy. Refer - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 390
(legacy mode) is still set after lossless DLS is disabled. Use iodReset to disable IOD completely. --show Displays the IOD setting on the switch. This command displays the status of both, legacy IOD setting and IOD enhanced with lossless DLS. --help Displays command usage. Examples To enable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 391
iodShow 2 iodShow Displays the in-order delivery (IOD) setting. Synopsis iodshow Description Use this command to display the IOD setting on the switch. By default, IOD is disabled. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 392
switch IPFC network interface, and to configure a service port on the CP blade of a Brocade Guide. Configuring IP Addresses using the command line interface • The command accepts the -ipv6 command line syntax with the --add or--delete option on all platforms that support only on the active CP. - When - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 393
address. Valid switch and CP numbers depend on the platform on which the command is run. The command must be executed on the active CP. • and prefix of a chassis. On platforms with blade processors, the following additional command line options are supported with the --add or --delete options: - - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 394
CP1. -chassis Specifies the managed entity as the chassis. Examples Command line examples To configure an IPv6 address and prefix on a standalone platform: switch:admin> ipaddrset -ipv6 --add fec0:60:69bc:60:260:69ff:fed0:107/64 To configure an IPv6 address and prefix on a single CP of a chassis - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 395
IP address is being changed...Done. To verify the changes: switch:admin>ipaddrshow SWITCH Ethernet IP Address: 10.32.72.9 Ethernet Subnetmask: 255.255.240.0 Gateway IP Address: 10.32.64.1 DHCP: Off IPFC address for virtual fabric ID 128: 10.32.72.70/24 Fabric OS Command Reference 367 53-1001186 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 396
IP Address [192.168.166.148]: Ethernet Subnetmask [255.255.255.0]: Committing configuration...Done. To enable DHCP on a standalone, non-AP platform: switch:admin> ipaddrset Ethernet IP Address [192.168.74.102]: Ethernet Subnetmask [255.255.255.0]: Gateway IP Address [192.168.74.1]: DHCP [Off - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 397
For each CP: • Ethernet IP Address • Ethernet Subnet mask • Host Name • Gateway IP Address If the IPFC network interface is configured for logical switches: • IPFC address for Virtual Fabric ID For each CP: - Backplane IP address - IPv6 Auto configuration Enabled: Yes or No If enabled, the command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 398
. -slot slot_number Specifies the slot for a blade. -eth0 |-eth1 |-gate For a specified 200c:417a/64 To display all IP addresses on a Brocade DCX backbone: switch:admin> 48.1 CP1 Ethernet IP Address: 10.33.60.87 Ethernet Subnetmask: 255.255.240.0 Host Name: cp1 Gateway IP Address: 10.33.48 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 399
fec0:60:69bc:63:205:1eff:fe39:e45a/64 preferred IPv6 Gateways: To display only the IP addresses for CP 1: switch:admin> ipaddrshow CP1 Ethernet IP Address: 10.33.60.87 Ethernet Subnetmask: 255.255.240.0 Host Name: cp1 Gateway IP Address: 10.33.48.1 See Also ipAddrSet Fabric OS Command Reference - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 400
ipfilter --activate policyname ipfilter --delete policyname ipfilter --addrule policyname -rule rule_number -sip source IP -dp dest port -proto protocol are treated as chassis-wide configurations and apply to all logical switches in the chassis. Chassis permissions are required to manage IP Filter - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 401
delete the policy from the persistent database, issue ipfilter --save. An active IP filter policy cannot be deleted. --addrule policyname Adds a new rule persistent configuration until saved or activated. The following arguments are supported with the --addrule option: Fabric OS Command Reference - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 402
:69ff:fe80:d4a -dp 23 \ -proto tcp -act permit To display all existing IP filter policies: switch:admin> ipfilter --show Name: default_ipv4, Type: ipv4, State: active Rule Source IP Protocol Dest Port Action 1 any tcp 22 permit 2 any tcp 23 permit 3 any tcp 897 permit 4 any tcp - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 403
Protocol 1 fec0:60:69bc:60:260:69ff:fe80:d4a tcp Dest Port Action 23 permit To activate the IP Filter policy "ex1": switch:admin> ipfilter --activate ex1 To display all IP Filter policies, including the activated policy: switch:admin> ipfilter --show Name: default_ipv4, Type: ipv4, State - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 404
:admin> ipfilter --addrule ex2 -sip 10.32.69.99 -dp 23 -proto tcp -act permit To display the IP filter policies, including the new policy: switch:admin> ipfilter --show Name: default_ipv4, Type: ipv4, State: active Rule Source IP Protocol Dest Port Action 1 any tcp 22 permit 2 any tcp - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 405
(IPsec) feature for traffic flows on switch Ethernet management interfaces, or to display the through the use of cryptographic security services. IPSec uses different protocols to layer protocol header. The IPsec key management supports Internet Key Exchange (IKE) or Manual key/SA entry. • In IKE the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 406
, IP addresses and ports must be specified in blades in a chassis, nor does it support protection of traffic flows on FCIP interfaces. This command does not support manual keyed entries) and resets the configuration databases to default values. --disable Disables IPsec on the switch. All active - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 407
Supported policies include: Creates or modifies an IPsec policy. This policy determines the security services filter/selector (IP address, protocol, and port information) and transform set. A subtype is . The name must be between 1 and 32 characters in length, and may include alphanumeric characters - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 408
is a user-generated name. The name must be between 1 and 32 characters in length, and may include alphanumeric characters, dashes (-), and underscores names, separated by commas. For SA bundles, [AH, ESP] is the supported combination. The SAs must be created prior to being included in the SA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 409
an SA once it is created. Use ipsecConfig --flush manual-sa to remove all SA entries from the kernel SA generated name. The name must be between 1 and 32 characters in length, and may include alphanumeric characters, encryption algorithm • aes256_cbc - AES-256 algorithm -spi number Specifies the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 410
generated name. The name must be between 1 and 32 characters in length, and may include alphanumeric characters, -id identifier Specifies the local identifier. The switch is identified by its IPv4 or IPv6 address 128-bit algorithm • aes256_cbc - AES 256-bit algorithm • null_enc - Null encryption - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 411
or ipsecConfig --delete and recreate the entries. The syntax for creating an SADB entry is as follows: ipsecconfig --add manual-sa arguments. arguments Valid arguments for manual-sa include: -spi number Specifies the security parameter index (SPI) for the SA. This is a user-defined index. Valid - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 412
key. Use the LINUX random key generator or any other comparable third party utility to generate the manual SA keys. Refer to the Fabric OS Administrator's Guide for details. • A 192-bit value for the 3des_cbc encryption algorithm, for example, 0x96358c90783bbfa3d7b196ceabe0536b • A zero-bit value - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 413
type and subtype. Deletes all configuration information for the specified policy type. --flush manual-sa Flushes all SA entries (including manually keyed and automatically keyed SAs) from the kernel SADB. All active TCP sessions that are using IPsec protection are terminated when this command is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 414
of the local entity, encryption algorithm, hash algorithm, PRF algorithm, DH group, authentication method, path and filename of the pre-shared key. manual-sa arguments -a -tag name Displays the Security Associations in the local SADB. No subtype is required with this command. Specifies the display - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 415
IKE policy for the remote peer. switch:admin> ipsecconfig --add policy ike manual-sa -a. Refer to the "IPsec display commands" section for an example. 10. Perform the equivalent steps on the remote peer to complete the IPsec configuration. Refer to your server administration guide for instructions - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 416
complete the IPsec configuration. Refer to your server administration guide for instructions. Example 3 Secure traffic between two systems using AH with SHA1 and ESP protection with 3DES and configure IKE with pre-shared keys. The two systems are a switch, BROCADE300 (IP address 10.33.74.13), and an - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 417
remote peer to complete the IPsec configuration. Refer to your server administration guide for instructions. Example 4 Secure traffic between two systems using protection with MD5 and Manually keyed SAs. The two systems are a switch, the BROCADE300 (IPv4 address 10.33.74.13), and an external UNIX - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 418
SAs in the kernel SA database: switch:admin> ipsecconfig --show manual-sa -a 10.33.69.132 32 flags=0x00000000 state=mature created: Oct 15 23:34:55 2008 current: Oct 15 23:35:06 2008 diff: 11(s) hard: 2621440(s) soft: 2100388(s) last: Oct 15 23:34:56 2008 hard: 0(s) soft: 0(s) current: 256 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 419
mode:transport local:10.33.69.132 remote:10.33.74.13 sa-proposal:ipsec-esp-a-b ike-policy:remote-B To display all IPsec traffic selectors: switch:admin> ipsecconfig --show policy ips selector -a slt-A-B-any local:10.33.69.132 remote:10.33.74.13 direction:outbound upper-layer-protocol:any - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 420
2 ipsecConfig References [DISR] "DOD IPv6 Standards Profiles for IPv6 Capable Products", v2.0 (6/15/2007). [NIST] "A Profile for IPv6 in the U.S. Government", v1.0 (1/31/2007). [4301] Kent, S. and K. Seo, "Security Architecture for the Internet Protocol", RFC 4301 (Dec 2005). [4302] Kent, S., "IP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 421
iscsiCfg Synopsis Configures or displays iSCSI entities. iscsicfg create auth -u username -s CHAP_secret [-h] iscsicfg --modify auth -u username -s CHAP_secret [-h] iscsicfg --delete auth -u username [-h] iscsicfg --clear auth [-h] iscsicfg --show auth [-u username] [-h] iscsicfg --easycreate tgt - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 422
memory. This triggers the propagation of changes to all iSCSI-enabled switches and blades in the fabric. Changes do not take effect until a --commit by the port WWN. --easycreate tgt -s [-h] Shows the Node and Port WWNs which is used for any easycreate operation from this switch. --create tgt - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 423
one-way or mutual CHAP is enforced, based on the login frame from the host. Adds the LUN map to target_name. port_wwn specifies the port WWN of the physical FC target whose LUNs are to supported. Multiple entities may be specified as a comma-separated list. The IQN may be a maximum of 64 characters - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 424
an active DD set. --show ddset [-n ddset_name] [-v] [-h] Displays the DD set database. ddset_name is optional. fabric iSCSI-enabled switches and . --show initiator [-i initiator_name][-h] Displays all iSCSI initiators that the switch is aware of. If an initiator has attempted discovery or logon - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 425
-a CHAP The operation completed successfully. To display the target database: switch:admin> iscsicfg --show tgt Number of records found: 2 Name: State/Status: iqn.2005-10.com.brocade.tgt1 Offline/Defined Name: State/Status: iqn.2222-23.com.brocade:21:00:00:20:37:df:83:fc Online/Committed To - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 426
-w 22:00:00:04:cf:75:5b:9a -l 2-5:5-8 The operation completed successfully. To display LUN maps: switch:admin> iscsicfg --show lun Number of records found: 2 Target: iqn.2005-10.com.brocade.tgt1 Number of LUN Maps: 1 FC WWN Virtual LUN(s) 22:00:00:04:cf:20:5d:33 0 Physical LUN(s) 0 Target - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 427
myddset -d mynewdd The operation completed successfully. To display the iSCSI-aware switches and their operational states (Displays switches that are capable of propagating iSCSI data base): switch:admin> iscsicfg --show fabric Switch ID Switch WWN Switch State iSNSC * 1 10:00:00:60:69:e4:20:1e - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 428
found: 1 Name iqn.1991-05.com.brocade:initiator1 IP Address 172.16.14.101 switch:admin> iscsicfg --show initiator -i iqn.1991-05.com.brocade:initiator1 Initiator details are: Name IP Address iqn.1991-05.com.brocade:isi154116.englab.brocade.com 172.16.14.101 No. of targets currently accessible - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 429
and iFlipper FPGA. Notes This command is supported only on the Brocade FR4-16IP blade. On all other platforms, this command displays in the range of 0 - 7 or specify 8 for all ports. Examples To run iscsichiptest: switch:admin> iscsichiptest --slot 7 -unit 1 -testtype 0 Running iscsichiptest - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 430
services Manage/display all iscsi configuration including authentication/virtual targets/discovery domains. Manage/display iscsi protocol related port configuration including negotiated parameters/port statistics/current sessions. Manage/display iscsi session information. Manage/display iscsi switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 431
The CP processor instructs the Network processor BCM1125H in each GigE port to run path option. Notes This command is supported only on the Brocade FR4-16IP blade. On all other platforms, this on each port. The default value is 100. Examples To run iscsipathtest: switch:admin> iscsipathtest - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 432
command to display or modify the iSCSI port parameters. The default iSCSI port settings are as follows: TABLE 17 Default iSCSI port settings Setting Default Error recovery level Connections per session Connections per session Header digest support Immediate data support First burst length value - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 433
number. This parameter only supports FC4-16IP blades in Brocade 48000 directors. Specifies the port number of a GbE port to be configured in the specified slot. Use -h on any option to display the help text for it. Examples To modify the port parameters: switch:admin> iscsiportcfg --modify 7/ge2 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 434
2 iscsiPortCfg See Also iSCSI Abort Task Set: iSCSI Clear ACA: iSCSI Clear Task Set: iSCSI LUN Reset: iSCSI Target Reset: iSCSI Task Reassign: Non FCP in PDU: Non FCP in Octet: Non FCP out PDU: Non FCP out Octet: Session details: Session Number: iSCSI Session Type: Initiator Name: Target Name: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 435
Target Name: iqn.2002-12.com.brocade:2f:df:00:06:2b:0d:10:b9 Session type Init. Session ID Tgt. Session ID Initiator IP Num. Conns . Normal 0x400001370000 1025 30.50.1.115 1 TCP Connection Details Index TCP Port Leading Connection Switch Port 1 2743 Yes 8/ge4 Security Details CHAP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 436
Task Reassign: 0 Non FCP in PDU: 0 Non FCP in Octet: 0 Non FCP out PDU: 0 Non FCP out Octet: 0 See Also fosConfig, iscsiCfg, iscsiPortCfg 256KB 64KB 16 60s 0s 2 Off Peer Value 64KB On On On 408 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 437
the connection redirection for iSCSI blades on the switch: switch:admin> iscsiswcfg --showconn -s all Number of records found: 1 Slot ICR Status 3 Disabled To display a target name prefix: switch:admin> iscsiswcfg --showgw Target name is: iqn.2002-12.com.brocade To change a target name - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 438
bw: 32.000G TRUNK QOS 2: 8-> 3 10:00:00:05:1e:41:8a:d5 30 B5300 sp: 4.000G bw: 16.000G TRUNK QOS 3: 19-> 10 10:00:00:05:1e:41:43:ac 50 B300 sp: 8.000G bw: 64.000G TRUNK When you issue islshow in a logical fabric, the output displays as follows: switch:user - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 439
. Specifies the port number of a GbE port in an iSCSI blade. This parameter only supports Brocade FC4-16IP blades in Brocade 48000 directors. Specifies the IP address in dotted-decimal form. Examples To set the IP address of an external iSNS server with an attached GbE port: switch:admin> isnsccfg - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 440
2 isnscCfg See Also To register the iSNS objects: switch:admin> isnsccfg --reregister Initiated re-register of iSNS objects with iSNS server To clear the IP address of iSNS server: switch:admin> isnsccfg --clear Cleared iSNS server configuration. none 412 Fabric OS Command Reference 53-1001186- - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 441
and "1/0 - 1/15" are equivalent. • If no slot number is specified, user port lists are specified by area number. For instance, "0, 16, 32" and "1/0, 2/0, 3/0" specify the same ports on a 16-port/blade system. On that same system, "1/0, 16, 32" is not a valid list: even though it is legal syntax, the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 442
BPORTS UPORTS QUADS CHIPS MINIS SLOTS INDEX Blade Switch Blade Blade Blade Chassis n.a. Blade ports, internal and external ports User ports, ports with external connections Quadrants, group of (normally four) ports Chips, ASICs within a blade Mini-switches Slots Anything Note The execution of - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 443
command lists all current Telnet and serial port login sessions and information such as session terminate an open Telnet connection: switch:admin> killtelnet Collecting login information 29 " since " 6:29pm" and has been inactive for "16.00s ", the current command executed being: "-rbash ". The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 444
Access Protocol (LDAP) Active Directory (AD) server role to one of the default roles available on a switch. This command also provides switch with the permissions associated with the mapped switch role. This command supports one-to-one role mapping only. For example, you might map the "SAN - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 445
| zoneadmin See Also To map an LDAP AD server role to the switch role of "operator": switch:admin> ldapcfg --maprole SANoperator operator LDAP role SANoperator has been successfully mapped. switch:admin> ldapcfg --unmaprole SANoperator LDAP role SANoperator has been successfully unmapped - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 446
chassis context. Each logical switch displays only the user ports that are configured to be part of that switch instance. The switch context is defined by the fabric ID. The default context is the base logical switch that you are placed in upon login. The default logical switch context is defined by - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 447
Guide for specific hardware support. You cannot use the portEnable command on logical ports. Use lfcfg with the --lislenable option to re-enable disabled LISL ports on a logical switch the LISLs, the physical ports on the base switch that are associated with the LISL ports. This operand is optional - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 448
:09:00 Base Switch WWN: 10:00:00:60:69:e2:09:00 Base Domain: 53 Number of Partitions: 2 Logical Switch: 1 Fabric Id: 2 State: Online(1) Switch WWN: 10 the logical switch set by the context: switch:admin> lfcfg --show -lisl -v ID Port# remote-domain Name State Associated Physical Ports 2 384 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 449
To display information about all LISLs in the chassis: switch:admin> lfcfg --showall -lisl FID Port# remote-domain Name State 2 384 24 sw0 PT Online 3 385 24 sw0 PT Online See Also FID Port# remote-domain Name State 2 384 24 sw0 PT Online 3 385 24 sw0 PT Online . none lfCfg 2 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 450
. In this case, the switch must be rebooted to allow the software to recognize the license and initialize itself correctly. Also, there is special handling required when a trunking license is added to the switch. For a trunking license to become effective, the trunk ports need to be refreshed using - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 451
Appendix A, "Command Availability" for details. Operands none Examples To display license commands: switch:admin> licensehelp licenseadd licensehelp licenseidshow licenseremove licenseshow Adds license keys to switch Print license help info Displays the system license ID Removes a license key - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 452
Some features of the switch and the fabric are optional, licensed products. Without a license installed for such products, the services provided by these Availability" for details. Operands none Examples To display the license ID: switch:admin> licenseidshow a4:f8:69:33:22:00:ea:18 See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 453
more online ports than the purchased POD licenses can support. Note port that is offline. --reserve portnum Reserves a license assignment for a port when the switch is using the Dynamic POD method. This option can only be applied to a port that is offline. The port number is the number of the port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 454
base switch license 5 ports are assigned to the first POD license Ports assigned to the base switch license: 0, 1, 2, 3, 4, 5, 6, 7, 15, 16 Ports assigned to the first POD license: 8, 9, 17, 18, 19 Ports assigned to the second POD license: 10, 11, 12, 13, 14 [Note: these ports cannot be activated - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 455
entered, use the licenseShow command to verify that the key has been removed and the licensed product uninstalled. After removing a license key, the switch must be rebooted. With no license key, licenseShow displays "No licenses." Note The execution of this command is subject to Virtual Fabric or - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 456
To display the license keys on a switch with temporary (expired) licenses installed: switch:admin> licenseShow 7QmYFYJrmDgE9tTS4AYXB9trYSGtMtrQZSTK4ZSC7FC9ZAYAgE: Integrated Routing license Expiry Date 01/16/2008 License is expired 33YBfZfKZ3tQKrRJJRtgmS3JDtCL99P4fYrJYQP7GffS4ASmNE: Enterprise - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 457
each port on the switch, including non-ISLs. An E_PORT suffix is appended to the interface number of active ISLs. If a static cost is assigned to a port, this command displays the cost for all ports. The following operands are optional: slotnumber For bladed systems only, specifies the slot number - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 458
1000 2 13 1000 2 14 1000 2 15 1000 Type to continue, Q to stop: To set the ISL cost on a port: switch:admin> linkcost 2/4 500 To display the new cost value on the same port: switch:admin> linkcost 2/4 Interface2/4 Cost 500 (STATIC) To delete the cost value and reset to default - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 459
login 2 login Logs in as new user. Synopsis login Description Use this command to log in to the switch with another user name and password, without first logging out from the original session. If you originally connected through a Telnet or rlogin session, that session - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 460
command is accepted as a synonym for logout, as is Ctrl-D at the beginning of a line. Operands none Examples To log out from an rlogin session: switch:admin> logout See Also login 432 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 461
Synopsis Displays logical SAN zone information. members. Search parameters -f, -w, and -z allow searching for LSAN zones based on fabric ID, WWN of an LSAN zone member, or LSAN zones in the specified fabric. Displays LSAN zones containing the specified port WWN. The WWN format is xx:xx:xx:xx:xx:xx - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 462
2 lsanZoneShow Examples See Also To display the LSAN zones: switch:admin> lsanzoneshow Fabric ID: 4 Zone Name: lsan_fcr10_0 50:05:07:65: :84:0b:83 50:05:07:65:05:84:09:0e switch# fcrFabricShow, fcrPhyDevShow, fcrProxyDevShow, fcrRouteShow, switchShow 434 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 463
aware and run Fabric OS v6.2.0 or later. Refer to the Fabric OS Administrator's Guide for specific hardware support. The Virtual Fabric (VF) feature must be enabled on the switch before you can configure a logical switch. Use the fosconfig --enable vf command to enable the feature. Use the fosconfig - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 464
. --change Changes the fabric ID of a logical switch, creates a base logical switch out of an existing logical switch, or removes base switch properties. The -newfid and -base operands are exclusive and may not be combined. The following operands are supported: FID Specifies the Fabric ID of the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 465
--create 2 -base -force About to create switch with fid=2. Please wait... Switch successfully created. To delete a logical switch: switch:admin> lscfg --delete 2 All active login sessions for FID 2 have been terminated. Switch successfully deleted. To assign ports to a logical switch: switch:admin - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 466
logging message: fid = 2. Please enable your switch. To display the change: switch:admin> lscfg --show Created switches: 128(ds) 1 2(bs) Port 0 1 2 3 4 5 6 7 8 9 FID 1 | 1 | 1 | 1 | 1 | 128 | 128 | 128 | 128 | 128 | Port 10 11 12 13 14 15 16 17 18 19 FID 128 | 128 | 128 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 467
fid 1 Disabling the proposed new base switch... Disabling switch fid 1 Please enable your switches when ready. To make Logical switch FID 1 the base switch with confirmation: switch:admin> lscfg --change 1 -base Creation of a base switch requires that the proposed new base switch on this system be - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 468
two types of database entries: • The link state database entry, which is permanently allocated. • The link state record (LSR), which is allocated when a switch is connected to the fabric. The LSR describes the links between connected domains in a fabric. For a link to be reported in the LSR, the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 469
link represents a neighbor in NB_ST_FULL state. Always 0. ID of this link. It is the domain ID of the switch on the other side of the link. Port number on the local switch. Port number of the port on the other side of the link. Cost of this link. The default cost for a 1 Gbps link is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 470
lsId = 1 advertiser = 1 incarn = 0x80000185 length = 60 chksum = 0x168a linkCnt = 2, flags = 0x0 LinkId = 91, out port = 28, rem port = LinkId = 91, out port = 29, rem port = 28, cost = 500, costCnt = 0, type = 1 29, cost = 500, costCnt = 0, type = 1 interfaceShow, nbrStateShow 442 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 471
Router: OFF Allow XISL Use: ON LS Attributes: [FID: 20, Base Switch: No, Default Switch: Yes] Area Port Media Speed State Proto 0 0 id N8 No_Light Disabled (Persistent) 1 11 id N4 Online F-Port 10:00:00:06:2b:0f:42:b4 14 14 id N4 No_Light 15 15 id N4 No_Light 16 16 id N8 No_Light 17 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 472
id 24 24 id 25 25 id 26 26 id 27 27 id 28 28 id 29 29 id 30 30 id 31 31 id 32 32 id 33 33 id 34 34 id 35 35 id 36 36 -37 37 -38 38 -39 39 id N8 No_Light N8 No_Light N8 No_Light - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 473
displayed in bytes. Examples To view the memory usage: switch:admin> memshow total used Mem: 129740800 112562176 Swap: 0 0 switch:admin> memshow -m total used Mem: 123 107 Swap: 0 0 free 17178624 0 free 16 0 shared 0 buffers cached 139264 30396416 shared 0 buffers 0 cached - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 474
switch in the fabric: switch:admin> mscapabilityshow Switch WWN Capability Switch Name 10:00:00:60:69:20:15:71 0x0000008f "switch1"* 10:00:00:60:69:00:30:05 0x0000008f "switch2" Capability Bit Definitions: Bit 0: Basic Config Service Supported. Bit 1: Platform Management Service Supported - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 475
" for details. This command is supported only in AD0 and AD255 contexts. Operands none Examples To display the MS ACL: switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 1 MS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 476
2 msConfigure See Also 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 0 done ... msCapabilityShow, msPlatShow, msPlClearDB, msPlMgmtActivate, msPlMgmtDeactivate, msTdDisable, msTdEnable, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 477
OS Commands" and Appendix A, "Command Availability" for details. Operands none Examples To display the MS platform database for a fabric: switch:admin> msplatshow Platform Name: [9] "first obj" Platform Type: 5 : GATEWAY Number of Associated M.A.: 1 Associated Management Addresses: [35] "http - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 478
"Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands none Examples To display the MS platform service database control block: switch:admin> msplatshowdbcb Domain Worldwide Name Retry Count Exchange Status 3: 10:00:00:60:69:51:10:e6 0 0x2 msPlDBCB - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 479
"Command Availability" for details. This command is supported only in AD0 and AD255 contexts. Operands none Examples To clear the MS platform database: switch:admin> msplcleardb MS Platform Service is currently enabled. This will erase MS Platform Service Database in the entire fabric. Would you - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 480
switch. MS activation is persistent across power cycles and reboots. Notes By default, the MS platform service is disabled. Before issuing this command, run msCapabilityShow to verify that all switches in the fabric support the MS platform service; if one switch does not support the service - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 481
A, "Command Availability" for details. This command is supported only in AD0 and AD255 contexts. Operands none Examples To deactivate the MS platform service on all switches in the fabric: switch:admin> msplmgmtdeactivate MS Platform Service is currently enabled. This will erase MS Platform - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 482
configuration database for all affected switches. The change is persistent across power cycles and reboots. Notes Topology Discovery Management requires the attached devices (including attached switches) to support request node identification data (RNID) extended link service (ELS). When an FCS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 483
configuration database for all affected switches. The change is persistent across power cycles and reboots. Notes Topology Discovery Management requires the attached devices (including attached switches) to support request node identification data (RNID) extended link service (ELS). When an FCS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 484
Appendix A, "Command Availability" for details. Operands none Examples To display the status of the topology discovery service: switch:admin> mstdreadconfig *MS Topology Discovery is enabled. See Also msCapabilityShow, msConfigure, msPlMgmtActivate, msPlMgmtDeactivate, msTdDisable, msTdEnable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 485
session. The login session gives details of the following: • CP/switch (or console/serial port) used to log in. • The IP address of the current Telnet or the name of the current console port or the serial port (if modem login used). • The current CP mode (Active, Standby, or Unknown). • The current - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 486
remote switch. Remote Port E_Port interface on the remote switch. State if the neighbor is in full state. Note The execution of port to display, followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 487
nbrStateShow 2 Examples To display information about a neighbor directly connected to the local switch: switch:user> nbrstateshow 2/0 Local Domain ID: 1 Local Port Domain Remote Port State 16 2 48 NB_ST_FULL See Also interfaceShow Fabric OS Command Reference 459 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 488
number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional; if omitted, FSPF statistics are reset. Examples To display the counters on a port: switch:admin> interfaceshow 1/0 idbP = 0x10050a38 Interface 0 data structure: nghbP ifNo - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 489
To reset the counters on a port: switch:admin> nbrstatsclear 1/0 To verify the changes: switch:admin> interfaceshow 1/0 idbP = 0x10050a38 Interface 0 data structure: nghbP ifNo masterPort defaultCost cost = 0x1004ce68 = 0 = 0 (self) = 500 = 500 (output truncated) See Also interfaceShow, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 490
the NS information for all devices in the fabric that have either a port World Wide Name (WWN) or a node WWN matching the given WWN; Examples To display all the device information matching the alias "a320": switch:user> nodefind a320 Local: Type Pid COS PortName NodeName SCR NL 0314d9 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 491
Name: 20:00:00:e0:8b:01:ce:d3 Device type: Physical Target Port Index: 14 Share Area: No Device Shared in Other AD: No Aliases: To display all the device information matching the PID "0x020eef": switch:user> nodefind 0x020eef Remote: Type Pid COS PortName NodeName NL 020eef; 3;20:00 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 492
• Physical - Device connected to the Nx_Port, using FLOGI to log in to the switch. • Virtual - Contrived device by the switch. • NPV - Device connected to the Nx_Port, using FDISC to log in to the switch. • iSCSI - Device connected to the iSCSI port. 464 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 493
has 6 entries } To display local NS information with aliases with the -r option: switch:admin> nsaliasshow -r { Type Pid COS PortName NodeName SCR N 021200; 2,3;10:00:00:60:69:00:03:19;30:00:00:60:69:00:03:19; 3 FC4s: FCIP Fabric Port Name: 20:02:00:60:69:01:44:22 Permanent - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 494
Name: 20:04:00:60:69:01:44:22 Permanent Port Name: 21:00:00:ad:bc:04:6f:70 Aliases: The Local Name Server has 6 entries } To display local NS information with aliases with the -r and -t options: switch:admin> nsaliasshow -r -t { Type Pid COS PortName NodeName SCR N 021200; 2,3;10:00:00 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 495
Fabric Port Name: 20:04:00:60:69:01:44:22 Permanent Port Name: 21:00:00:ad:bc:04:6f:70 Device type: Physical Target Aliases: The Local Name Server has 6 entries } See Also nsAllShow, nsShow, switchShow nsAliasShow 2 Fabric OS Command Reference 467 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 496
supporting FC4 code," where x is the number of ports of a type and code is the FC-PH type code. Examples To display all devices in the fabric, followed by all type 8 (SCSI-FCP) devices and all type 5 (SCSI-FCIP) devices: switch:admin> nsAllShow { 011000 011200 0118e2 0118e4 0118e8 0118ef 021200 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 497
displays the message "No Entry is found!" For each remote switch found, this command displays the domain number, state, revision, classes of service supported by the device. PortName The device's port World Wide Name (WWN). NodeName The device's node WWN. Permanent Port Name Physical - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 498
:00:00:60:69:00:ab:ba; FC4s: FCIP PortSymb: [28] "SEAGATE ST318452FC 0001" Fabric Port Name: 20:02:00:60:69:00:68:19 Permanent Port Name: 10:00:00:60:69:00:ab:ba Switch entry for 4 state rev owner known v320 0xfffc01 Device list: count 0 No entry is found! To - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 499
to display NS information for all switches in the fabric. Each line of output displays the following information: Type U for unknown, N for N_Port, NL for NL_Port. PID 24-bit Fibre Channel address. COS List of classes of service supported by device. PortName Device port World Wide Name (WWN - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 500
- Device connected to the Nx_Port, using FLOGI to login to the switch. • Virtual - Device contrived by the switch. • NPV - Device connected to the Nx_Port, using FDISC to log in to the switch. • iSCSI - Device connected to the iSCSI port. The second part indicates the role of the device. Currently - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 501
21:00:00:e0:8b:12:8a:be Port Index: 14 Share Area: No Device Shared in Other AD: No Redirect: No The Local Name Server has 2 entries } See Also To display local name server information with "-r" and "-t" options. switch:admin> nsshow -r -t { Type Pid COS PortName NodeName SCR N 010100 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 502
, N - N_Port, NL - NL_Port. Pid The 24-bit Fibre Channel address. COS A list of classes of service supported by the device. PortName The device's port World Wide Name (WWN). NodeName The device's node WWN. Permanent Port Name The physical N_Port or NL_Port WWN. DeviceType The device type - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 503
:d9:61:ac Device type: Physical Target No remote zoned members To display each local device's online zoned device data: switch:admin> nszonemember -a Port: 4 Pid: 0xb00400 Aliases: ix360_131_201_6a Zoned Members: 2 devices Pid: 0xb00400 Aliases: ix360_131_201_6a Pid: 0xba1ee8 Aliases: trimm101b_3 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 504
Aliases: ix360_131_196p5 Pid: 0xe07d00 Aliases: hds9200_6p4 hds9200_6p4 Port: 14 Pid: 0xb00e00 Aliases: dl360_130251a dl360_130251a Zoned Members Aliases: trimm100a_2 To display all the unzoned devices in the fabric: switch:admin> nszonemember -u Pid: 0xb01ea9; Aliases: trimm32b_1 Pid: 0xb01eaa - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 505
. For the password database to be distributed to other switches in the fabric, the switches must be configured to accept the password database with the fddCfg command. The password database is distributed manually with the distribute command. If RADIUS authentication is enabled, password change - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 506
" and Appendix A, "Command Availability" for details. Examples Diagnostics To change the password for the admin account while logged in as admin: switch:admin> passwd Changing password for admin Enter new password: Re-type new password: Password changed. Saving password to stable storage. Password - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 507
passwd 2 The password you entered contains less than the minimum required number of lowercase characters. Insufficient number of upper case letters The password you entered contains less than the minimum required number of uppercase characters. Insufficient number of digits in password The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 508
2 passwdCfg passwdCfg Synopsis Manages the password policies. passwdcfg --set options value passwdcfg --disableadminlockout passwdcfg --enableadminlockout passwdcfg --setdefault passwdcfg --showall passwdcfg --help Description Use this command to manage password policies. Use --set to configure - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 509
. A failed login attempt counter is maintained for each user on each switch instance. The counters for all user accounts are reset to zero when the Configures a specified password policy. The following arguments are supported: -lowercase value Specifies the minimum number of lowercase alphabetic - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 510
login equals the "passwdcfg.lockoutthreshold", the account gets locked for the "passwdcfg.lockoutduration" duration. The particular account is unlocked manually using userconfig --change account name-u (requires root/factory/security admin/admin privileges) or it is automatically unlocked after - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 511
that a password must contain at least two uppercase characters, and that passwords expire in 90 days from the date they are defined: switch:admin> passwdcfg --set -uppercase 2 -maxpasswordage 90 Diagnostics The passwdCfg command may fail for any of the following reasons: Permission failure You not - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 512
2 passwdCfg See Also lowercase value out of range The -lowercase value specified must be greater than or equal to 0 and less than or equal to -minlength value. uppercase value out of range The -uppercase value specified must be greater than or equal to 0 and less than or equal to -minlength value. - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 513
retry if there is a timeout or failure. It may fail if a switch along the path is busy or does not support this feature. If the advanced performance tuning (APT) policy in effect on the intermediate switches is not a port-based policy, subsequent data streams may not take the same path as displayed - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 514
receives frames. For hop 0, this is source_port. For bladed systems and ports above 256, this parameter is the port index; otherwise, it is the port area. Domain ID The domain ID of the switch. Name The name of the switch. Out Port The output port that the frames take to reach the next hop - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 515
. For bladed systems and ports above 256, the destination is specified as the port index; otherwise, it is the port area. The embedded port (-1) is the default. The embedded port can be selected manually by entering the value of MAX_PORT. MAX_PORT stands for the maximum number of ports supported by - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 516
the port on the destination switch for the path being traced. This operand returns the state of this port. The embedded port (-1) is used by default, or if you specify a destination port that is not active. For bladed systems and ports above 256, the destination is specified as the port index - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 517
environment (the cost for this hop is the cost of the corresponding path in the base fabric): switch:admin> pathinfo 13 4 Target port is Embedded Hop In Port Domain ID (Name) Out Port BW Cost 0 4 9 2009* - 1500 1 2015* 10 8 1G 1000 2 6 13 E - - To display basic and extended - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 518
BW Cost 1 3 10 (web229) 12 1G 1000 Port 3 12 Tx Rx Tx Rx B/s (1s) 36 76 0 0 B/s (64s) 5 5 5 5 Txcrdz (1s) 0 - 0 - Txcrdz (64s) 0 - 0 - F/s (1s) 1 1 0 0 F/s (64s) 0 0 0 0 Words 240434036 2294316 2119951 2121767 Frames 20025929 54999 162338 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 519
the latest panic dump file available on the switch. If a panic dump file is specified as the following optional operand: panic_dump_file Specify the full path name of a panic dump file. * WatchDogRegister=0x0 Section=Startup time: Tue Dec 3 16:06:11 UTC 2002 Kernel= 2.4.19 Fabric OS= v4 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 520
and one target storage device connected to an Encryption Switch, you must add two monitors because of the manner supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports operands: slotnumber For bladed systems only, specifies the slot number of the port on which the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 521
both cannot be 0x000000. Examples To add an end-to-end monitor to blade 1 port 2: switch:admin> perfaddeemonitor 1/2 "0x050200" "0x1182ef" End-to-End monitor number 0 added. To add an : Tue May 20 08:32:25 2008 Operation Succeeded Fabric OS Command Reference 493 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 522
four devices (two of which are virtual) connected to the Encryption Switch along with their PIDs: EncryptionSwitch:SecurityAdmin>nsshow { Type Pid COS Port wwn: 10:00:00:00:C9:52:00:7D" Fabric Port Name: 20:20:00:05:1e:53:b8:45 Permanent Port Name: 20:01:00:05:1e:53:b8:41 Port Index: 32 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 523
End-to-End monitor number 1 added. 5. Display the EE monitors on the Encryption Switch: EncryptionSwitch:SecurityAdmin> perfmonitorshow --class EE 1 There are 2 end-to-end monitor(s) defined on port 1. KEY SID DID OWNER_APP TX_COUNT RX_COUNT OWNER_IP_ADDR 0 0x0a0100 0x0a2002 TELNET - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 524
to create a filter-based monitor that will count supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports to a port: switch:admin> perfaddipmonitor - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 525
command to create a filter-based monitor that counts the number supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports to a port: switch:admin> - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 526
this command to create a filter-based monitor that counts the number supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports : slotnumber For bladed systems only, specifies the slot number of the port on which the monitor to a port: switch:admin> perfaddrwmonitor 2/4 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 527
command to create a filter-based monitor that counts the number supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports : slotnumber For bladed systems only, specifies the slot number of the port on which the frame monitor to a port: switch:admin> perfaddscsimonitor 2/4 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 528
a user-defined filter-based performance monitor. perfaddusermonitor [ is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The the port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. " - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 529
operand is optional. By default, the alias is an empty string. Examples To add a filter-based monitor for all Extended Link Service requests (R_CTL=0x22 and TYPE=0x01) to a port: switch:admin> perfaddusermonitor 1/4 "4, 0xff, 0x22; 12, 0xff, 0x01" User monitor #0 added As a special case, to add - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 530
command to create a filter-based monitor that counts the number supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. operands: slotnumber For bladed systems only, specifies the slot number of the port on which the monitor to a port: switch:admin> perfaddwritemonitor - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 531
. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this Examples To clear the performance monitoring information from nonvolatile memory: switch:admin> perfcfgclear This will clear Performance Monitoring settings in FLASH - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 532
license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this the performance monitoring configuration information from nonvolatile memory: switch:admin> perfcfgrestore This will overwrite current Performance Monitoring - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 533
16 EE monitors • 16 filter monitors • A total number of 512 monitors per switch When there are more than 512 monitors in the system, monitors are saved to the flash in the following order: 1. For each port not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 534
on all platforms. Refer to the Fabric OS Administrator's Guide for specific hardware support. Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port on which the monitor is to be added, followed by a slash (/). portnumber - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 535
license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this number of the port on which the monitor is to be deleted, relative to its slot for bladed systems. Use switchShow for a list of valid ports. monitorId Specifies - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 536
to delete a filter-based performance monitor from a port, or all such monitors associated with a port. Notes This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 537
commands related to performance monitoring: switch:admin> perfhelp perfAddEEMonitor perfAddIPMonitor monitor Delete filter-based monitor Clear end-to-end/filter-based/ISL monitors Show end-to-end/filter-based/ISL monitors Set overall mask for end-to-end monitors Get ALPA CRC count by port and ALPA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 538
the port on which the monitor counter is to be cleared, relative to its slot for bladed systems. Use switchShow for a list of valid ports. port 2, continue? (yes, y, no, n): [no] y To clear statistics counters for a filter-based monitor: switch:admin> perfmonitorclear --class FLT 1/2 4 Filter-based - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 539
--class FLT 1/2 This will clear ALL filter-based monitors' counters on port 2, continue? (yes, y, no, y): [no] y To clear statistics counters for an ISL monitor: switch:admin> perfmonitorclear --class ISL 1 This will clear ISL monitor on port 1, continue? (yes, y, no, n): [no] y See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 540
port. Monitor classes include end-to-end monitors (EE), filter-based monitors (FLT), and interswitch link monitors (ISL). ISL monitors are automatically activated application: TELNET, WEB_TOOLS, or API. Frame_count The cumulative 64-bit frame count. Owner_ip_addr The IP address of the originator - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 541
This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this -end), FLT (filter-based), or ISL (interswitch link). These values are case-sensitive. For bladed systems only, specifies the slot number of the port on which to display the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 542
0 7 ----Tx Rx ===== 0 0 0 0 To display cumulative filter monitor information on a port: switch:admin> perfmonitorshow --class FLT 8 There are 2 filter-based monitors defined on port 8. KEY ALIAS OWNER_APP FRAME_COUNT OWNER_IP_ADDR 0 IPFrame TELNET 0x0000000000000000 N/A 1 SCSIRead TELNET - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 543
perfMonitorShow 2 See Also To display ISL monitor information on a port: switch:admin> perfmonitorshow --class ISL 1/1 Total transmit count for this ISL: 1462326 Number of destination domains monitored: 3 Number of ports in this ISL: 2 Domain 97: 110379 Domain 98: 13965 Domain 99: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 544
, M (Mirror) ports and GbE ports. On the Brocade FC4-48, the Area ID address field and the AL_PA ID address field must be masked together. On this blade, one bit of the AL_PA ID address field is used with the Area ID address field to identify the upper 32 ports. For example, ports 128 and 256 may be - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 545
. Specify the destination ID mask, in quotation marks, in dd:aa:pp format. Examples To set the overall mask for end-to-end monitors on a port: switch:admin> perfsetporteemask 1/6 "00:00:00" "ff:ff:ff" "00:ff:ff" "ff:00:00" Changing EE mask for this - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 546
port are displayed. CRC count is a 64-bit Guide for specific hardware support. Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port port. Examples To display the CRC error count for all AL_PA devices on a port: switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 547
. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this to its slot for bladed systems. Use switchShow for a list of valid ports. Examples To display the end-to-end mask on a port: switch:admin> perfshowporteemask 2/4 The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 548
2 perfShowPortEEMask RxSID ALPA: on RxDID Domain: on RxDID Area: on RxDID ALPA: on See Also perfAddEEMonitor, perfDelEEMonitor, perfSetPortEEMask 520 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 549
maximum flows displayed are as follows: 32 For the Brocade 300, 5100, 5300, and FC8-xx port blades. 16 For the Brocade 4100, 4900, 5000, 7600, and FC4-xx port blades. 4 For the Brocade 7500. Top Talker supports two modes, Port Mode and Fabric Mode: • In Port Mode, Top Talker is installed on - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 550
. Valid values are between 1 and 32. If a value greater than 32 is entered, Top Talker displays counters for only 32 flows and a warning message. This Talker to blade 1 port 2 (which should be an F_Port): Switch:admin> perfttmon --add ingress 1/2 To delete the F_port Top Talker: switch:admin> - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 551
:admin> perfttmon --del fabricmode To display the Fabric Mode Top Talker output: Switch:admin> perfttmon --show dom 1 pid perfttmon --show dom 1 pid Src_PID Dst_PID MB/sec Potential E-Ports 0x03f600 0x011300 121.748 2/0,2/2,2/3 0x03f600 0x011300 121.748 3/14,3/15 none Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 552
pair and CSR generated... Installing Root Certificate... See Also If PKI objects already exist, the following message is displayed: switch:admin> pkicreate Pki objects already exist. If you want to regenerate new objects, remove current objects by running pkiRemove command with security disabled - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 553
public key infrastructure (PKI) objects. Synopsis pkiremove Description Use this command to remove PKI objects including the switch private key, private key pass-phrase, CSR, root certificate, and switch certificate. Note The execution of this command is subject to Virtual Fabric or Admin Domain - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 554
key infrastructure (PKI) objects. Synopsis pkishow Description Use this command to display PKI objects, such as switch private key, private key pass-phrase, CSR, root certificate, and switch certificate. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 555
and re-created with new parameters. A policy cannot be deleted while an active FCIP tunnel is using it. Note The execution of this command is subject to of the policy. Valid values are 1 to 32, and ALL with the --show option. -enc method 3DES AES-128 AES-256 -auth algorithm SHA-1 MD5 AES-XCBC - - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 556
250000000 or 0. The default is 28800. Examples To create a new policy: switch:admin> policy --create ike 10 -enc 3des -auth md5 The following policy 3DES SA Life (seconds): 28800 To display all IKE policy settings: switch:admin> policy --show ike all IKE Policy 1 Authentication Algorithm: SHA-1 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 557
10 Authentication Algorithm: SHA-1 Encryption: AES-128 Perfect Forward Secrecy: 0 Diffie-Hellman Group: 1 SA Life (seconds): 28800 To delete a policy: switch:admin> policy ike --delete 10 The policy has been successfully deleted. See Also portCfg, portCfgShow, portShow policy 2 Fabric OS Command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 558
and the Brocade DCX-4S on (on the base switch and logical switches). On other platforms, the command returns a "not supported" message. Operands This command has the following operands: --bind Assigns the lower two bytes of the Fibre Channel address to the specified port. slot_number Specifies - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 559
are required to match. --help Displays command usage. Examples To bind a 16-bit address to the low two bytes of a port 24-bit Fibre Channel address: switch:admin>portaddress --bind 5/18 0x1a00 To unbind a given address from a port: switch:admin>portaddress --unbind 5/18 0x1a00 To display all - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 560
0x1700 8 bit To display the port address binding for port 28: See Also switch:admin>portaddress --show 5/18 Index Slot Port Area Mode 412 5 28 0x1400 8 bit To display the port bound to a specified address. switch:admin>portaddress --findPID 0x2400 Index Port Port ID 36 36 0x 2400 none - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 561
only, specify the slot number of the port to display, followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. Examples To display the AL_PAs of a port: switch:user> portalpashow 4/14 AL_PA type AL_PA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 562
at full bandwidth (depending on the port configuration). If the number of Buffer Usage is less than the number of Needed Buffers, the port is operating in the buffer limited mode. Link Distance For L0 (not in long distance mode), the command displays the fixed distance based on port speed, for - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 563
its slot for bladed systems. Use switchShow for a list of valid ports. Examples To display the port buffer information for a port: switch:admin> portbuffershow 17 User Port Lx Max/Resv Buffer Needed Link Remaining Port Type Mode Buffers Usage Buffers Distance Buffers 16 - - 0 - - 17 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 564
command cannot be executed on a logical port. Ports that support shared areas are divided into two ports: primary and secondary ports. Primary and secondary ports share the same area. Port CAM entries displayed on the primary ports also consist of all the secondary port SIDs and DIDs as well, when - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 565
3 1 350400 2b2200 2b1200 220400 SID Free, DID Free: (61, 511) To display port CAM entries on shared ports: In the following example, port 7/31 and 7/39 are shared ports and 7/31 is the primary port. switch:user> portcamshow 7/39 Area SID used DID used SID entries DID entries 207 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 566
a tunnel with VLAN tagging and Class of Service (CoS). - Create or modify a tunnel Guide. This command supports the following port options: slot For bladed systems only, specifies the slot number of the port to be configured, followed by a slash (/). [ge]port Specifies the number of the port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 567
port. Valid values are 0-7. dest_ipaddr Specifies the IP address for the remote end of theFCIP tunnel. IPv6 addresses are supported example, "Tunnel 0 to San Jose Office". -c compression traffic over FCIP tunnels: Differentiated Services (DSCP) and Layer 2 Class of Service (L2CoS). If the -M - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 568
16; default is 8. If Tape Piplelining is enabled, the default value is calculated based 12 and 32 bytes in port. Jumbo frames are not supported on secure tunnels. Only a single route is supported on an interface with a secure tunnel. Creates an FCIP tunnel with VLAN Tagging and Class of Service - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 569
tunnel. Byte streaming allows the Brocade switch to communicate with third party WAN optimization hardware. The WAN optimization hardware connects on the GE ports configured for FCIP. The TCP Byte Streaming feature is supported only on the Brocade 7500 or the FR4-18i blade configured for FCIP GE - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 570
to 16; default is 8. If Tape Piplelining is enabled, the default value is calculated based on is 0-7. Default is 0. Specifies the PL2 Class of Service/Priority, as defined by IEEE 802.1p, for the before downgrading to pre-v6.0.0 firmware versions that do not support QoS mapping. It removes the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 571
blades is configured by defining IP interfaces for origin and destination virtual ports, and then defining one or more IP routes to connect them. IPv6 addresses are supported on switches a.b.c.d. format.) mtu_size Specifies the maximum transmission unit size. The range allowed is 1260 to 2348 KB - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 572
on the protocol. The syntax for portCfg rscnsupr is as follows: portcfg rscnsupr [slot/][ge]port [-range] mode The following operands are supported with the rscnsupr option: Specifies a range of ports in the same slot to which to apply the configuration. This operand is optional. Valid modes - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 573
mirror traffic. fastwrite --enable --disable Configures the FC port for FC Fastwrite. Enables or disables FC Fastwrite between two Brocade 7500 routersor two Brocade 48000 directors with FR4-18i blades connected by Fibre Channel ISLs. FastWrite mitigateslatency effects on SCSI writes, and improves - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 574
to enable or disable FICON emulation in an FCIP tunnel and modify associated parameters onan FCIP tunnel on a 'virtual' E_Port. This command is supported only on a Brocade 7500/FR4-18 platform. A feature key is required to enable any of the FICON emulation processing. The tunnel must be down or - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 575
following optional parameter specific arguments are supported with the config and delete options. based upon the typical tape channel program that requires optimum performance. The default value is 32 the opposite side. The default value is 16. The range is 1-32. -e |--wrtTimer value Defines a time - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 576
is 1 Mb-5 Mb. -o |--oxidBase value Defines the base value of an entry pool of 256 OXIDs supplied to emulation-generated exchanges. It should fall outside existing FTRACE configuration. The following optional feature arguments are supported with the cfg and del options. These configurations are - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 577
default is 80000C7B. Specifies the trace record size in bytes. The range is 80 to port inband management interfaces on the Brocade 7500. Inband management allows a management station to communicate with the CP through GbE ports mask. IPv6 addresses are not supported. This operand is required with - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 578
must specify a gateway IP address. Examples To add an ARP entry: switch:admin> portcfg arp ge0 add 192.168.255.25 00:01:02:03 -v 100 -p 3 -P 7 Operation Succeeded To modify an existing FCIP tunnel with VLAN tagging: switch:admin> portcfg fciptunnel8/ge0 modify 1 192.168.10.1 192.168.20.1 0 -m 20 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 579
> portcfg iproute ge0 create 172.16.123.231.255.255.0.0 192.168.255.25 1 Operation Succeeded To create a static IP route using IPv6: switch:admin> portcfg iproute 8/ge0 create 3000:4444:800::3456/64 1080::8:800:200C:1234 To create a mirror port: switch:admin> portcfg mirrorport 2/4 --enable Please - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 580
2 portCfg To configure the internal addresses for the CP and GbE port inband management interfaces: switch:admin> portcfg inbandmgmt ge0 ipaddrset cp 192.168.255.1 255.255.255.0 switch:admin> portcfg inbandmgmt ge0 ipaddrset ge 192.168.255.2 255.255.255.0 To add a route to a management station that - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 581
Use this command to set the Arbitrated Loop Physical Address (AL_PA) offset on a port or a range of ports to either 0x0 (default) or 0x13. Changes made by this command are persistent across switch reboots and power cycles. Note The execution of this command is subject to Virtual Fabric or Admin - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 582
. Specifies the slot number on bladed systems, followed by a slash (/). Specifies a port or a port range, relative to the slot number on bladed systems, for example, 5/17-29. Examples To enable the auto disable feature on a single port: switch:admin> portcfgautodisable --enable 1 To enable the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 583
of which were previously enabled. The following example enables port 4. switch:admin> portcfgautodisable --enable 2-4 Same configuration for port 2 Same configuration for port 3 To disable the auto disable feature on a port range. switch:admin> portcfgautodisable --disable 0-8 See Also portCfgShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 584
: --disable Disables credit recovery configuration on the specified port. --enable Enables credit recovery configuration on the specified port. --help Displays command usage. Examples To enable credit recovery on a port: switch:admin> portcfgcreditrecovery --enable 3/15 To disable credit - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 585
to be reset to default, relative to its slot for bladed systems. Use switchShow to list valid ports. Examples To reset a port to factory defaults: switch:admin> portcfgdefault 1/3 To reset a GbE port to factory defaults: switch:admin> portcfgdefault 8/ge1 See Also portCfgEport, portCfgGport - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 586
E_Ports are connected between two switches, the maximum routing paths are limited to 16 E_Ports. Operands This command has the following operands: slot For bladed systems only, specifies the slot number of the port to be configured, followed by a slash (/). port Specifies the number of the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 587
The 239 DID mode is only supported on the Brocade Mi10k director. The portCfgExport command displays the Domain ID mode of the McDATA edge fabric. Refer to the example section for an illustration of this feature. The fabric ID must be the same for every router port connected to the same edge fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 588
are supported: director. For McDATA Fabric mode (-m 2), valid values are 1-31. -p pidformat Specifies the Port ID format. Valid values are 0-native, 1-core, 2-extended edge. This operand is applicable only when port mode is set to 0 (native mode). If port mode is not "Brocade Native", the Port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 589
and the command fails. Valid values are as follows: 0 Brocade Native mode. 1 McDATA Open Fabric mode. 2 McDATA Fabric switch:admin> portcfgexport 2/0 -a 1 -f 4 To disable fabric parameter negotiation on port 2/0 of an EX_Port: switch:admin> portcfgexport 2/0 -t 2 To enable IDID on port 2: switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 590
The F_Port buffer feature does not support ports configured as EX_Ports, Mirror Ports, Long Distance Ports, L_Ports, QoS Ports, Fast Write, and Trunk Areas switch:admin> portcfgfportbuffers --enable 2/44 12 To disable the port buffer configuration and return to the default buffer allocation: switch: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 591
does not attempt loop initialization (FL_Port) on the port. A port designated as a G_Port can become an E_Port. This configuration can be cleared but not set on VE/VEX_Ports. Changes made by this command are persistent across switch reboots or power cycles. Note The execution of this command is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 592
This feature is not backward compatible with firmware versions that do not support it. Notes The long distance modes L0.5, L1, and L2 are no longer supported in v5.3.0 or later. Changes made by portCfgISLMode are persistent across switch reboots and power cycles. This configuration can be cleared - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 593
To disable ISL R_RDY mode on a port: switch:admin> portcfgislmode 1/3, 0 See Also configure, portCfgLongDistance, portCfgShow portCfgISLMode 2 Fabric OS Command Reference 565 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 594
full size frame buffers on a particular port or to support a specified long distance link. The port can only be used as an E_Port. Changes made by this command are persistent across switch reboots and power is not backward compatible with firmware versions that do not support it. Ctrl-D cancels the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 595
the port as a regular port. A total of 20 full-size frame buffers are reserved for data traffic, regardless of the port's operating speed; therefore, the maximum supported link long distance IDLE fill words. desired_distance On switches running firmware versions earlier than Fabric OS v6.2.0, this - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 596
2 portCfgLongDistance Examples See Also To configure a switch port 63 to support a 100 km link and be initialized using the long distance link initialization protocol: switch:admin> portcfglongdistance 4/15 LS 1 100 switch:admin> portshow 4/15 portCFlags: 0x1 portFlags: 0x20001 PRESENT LED - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 597
default value of 0 is used. Private devices are supported only on Brocade enterprise-class platforms with FC2-16 and FC2-16 blades. On all other platforms, option 1 is blocked. duplex_mode Specify 2 to configure the specified port as a full-duplex L_Port with fairness. Specify 0 to configure the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 598
Auto Disable .. .. .. .. ... ON ON ON ... where AN:AutoNegotiate, ..:OFF, ??:INVALID, LM:L0.5 To display the L_Port conditions: switch:admin> portcfglport [output from other slots suppressed] Ports of Slot 4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Locked L_Port ON ON Private L_Port ON - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 599
fabric services. The following conditions must be met for a switch port to respond to NPIV requests from an NPIV device: NPIV capable: NPIV capability is a switch blade or port attribute that is required for NPIV functionality. Some blades within a switch, or some ports within a switch or blade - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 600
Rate Limit Credit Recovery where AN:AutoNegotiate, ..:OFF, ??:INVALID. LM:L0.5 (output from other ports suppressed) To disable NPIV functionality on a port: switch:admin> portcfgnpivport 1/3 0 See Also configure, portCfgDefault, portCfgShow 572 Fabric OS Command Reference 53-1001186 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 601
comes online if it is connected to an enterprise fabric switch that supports NPIV Notes NPIV capability should be enabled on the ports connected to the Access Gateway. Use portcfgnpivport to enable NPIV capability on the specific port. By default, NPIV is enabled by default on all 4 G and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 602
operands to display the persistently disabled status of all ports on the switch. Persistently disabled ports remain disabled across power cycles, switch reboots, and switch enables. By default, a port is enabled persistently, unless the port is capable of routing. The change in configuration is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 603
operands to display the persistently disabled status of all ports on the switch. Persistently enabled ports remain enabled across power cycles, switch reboots, and switch enables. By default, a port is enabled persistently, unless the port is capable of routing. The change in configuration is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 604
slot for bladed systems. Use switchShow to display a list of valid ports. This operand is optional; if omitted, this command displays the persistently enabled condition for all ports. --default Applies the default QoS configuration to the specified ports. QoS is enabled by best effort based on - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 605
> portcfgqos --enable 3/15 To disable QoS on a port. switch:admin> portcfgqos --disable 3/15 To set the ingress rate limit on a port to 2 Gbps: switch:admin> portcfgqos --setratelimit 3/15 2000 To set the default QoS configuration on a port: switch:admin> portcfgqos --default 3/15 See Also portCfg - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 606
port. If no operand is specified, this command displays port configuration settings for all ports on a switch, except gigabit Ethernet (GbE) ports configured on the Brocade 7500 The following information is displayed when the command is issued for all ports or for a specific port: Speed Displays - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 607
disabled. This value is set by the portCfgNPIVPort command. Displays ON when Quality of Service (QoS) is enabled on the port. Displays (..) or OFF when QoS is disabled. By default, QoS is enabled by best effort based on availability of buffers. This value is set by the portCfgQos command. Displays - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 608
A, "Command Availability" for details. Operands This command supports the following port options: slot For bladed systems only, specifies the slot number of the port to be configured, followed by a slash (/). [ge]port Specifies the number of the port to be configured, relative to its slot for - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 609
.. .. .. .. ON ON ON ON ON ON ON ON ON ON ON ON .. .. .. .. ON ON ON ON ON ON ON ON ON ON ON ON .. .. .. .. Ports of Slot 2 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Speed AN AN AN AN AN AN AN AN - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 610
where AN:AutoNegotiate, ..:OFF, ??:INVALID, LM:L0.5 To display the configuration settings for a single port: switch:admin> portcfgshow 2/16 Area Number: 144 Speed Level: AUTO AL_PA Offset 13: OFF Trunk Port ON Long Distance OFF VC Link Init OFF Locked L_Port OFF Locked G_Port OFF - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 611
portCfgShow 2 Iproute Configuration: IP Address Mask Gateway Metric IPv6ddress Len Gateway Metric Fciptunnel configuration: IPV4 FCIP TUNNEL(S) Tunnel ID 0 Remote IP Addr 192.168.60.180 Local IP Addr 192.168.60.100 Remote WWN Not Configured Local WWN 10:00:00:05:1e: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 612
.1 100 7 192.168.10.1 App 192.168.10.1 100 3 0.0.0.0 Perm To display inband management interfaces configured on the Brocade 7500: switch:admin> portcfgshow inbandmgmt ge1 Inband management: Enabled Port: ge1 CP Interface IP Address NetMask MTU 0 192.168.255.1 255.255.255.252 1500 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 613
across switch reboots or power cycles. Use the portShow command to display actual port speed levels software). The port automatically configures for maximum speed with enhanced retries. 1 The port is set at a fixed speed of 1 Gbps. 2 The port is set at a fixed speed of 2 Gbps. 4 The port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 614
slot for bladed systems. Use switchShow to display a listing of valid ports. mode Specify 1 to enable trunking on the specified port. Specify 0 to disable trunking on the port. This operand is required. Trunking is enabled by default, when a trunking license is present on the switch. Examples - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 615
and portEnable to disable or enable the port. When the port is not active, the preferred domain ID is configurable. The preferred domain ID is used by the VEX_Port's front phantom domain to request a domain ID from the principal switch. The domain ID received becomes the subsequent preferred - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 616
is not "Auto Negotiate". -d domainid Specify the preferred domain ID. For Brocade native mode (-m 0) or McDATA Open Fabric mode (-m 1), valid values Examples To display the VEX_Port configuration of port 2/16: switch:admin> portcfgvexport 2/16 Port 2/16 Admin: State: Pid format: Edge Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 617
fabric's version stamp: N/A To set the fabric ID of port 2/21 to 5 and the port ID format to core: switch:admin> portcfgvexport 2/21 -f 5 -p 1 To configure port 2/20 as a VEX_Port and set the fabric ID to 4: switch:admin> portcfgvexport 2/20 -a 1 -f 4 To disable fabric parameter negotiation on - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 618
IP host from an intelligent GbE port. Notes Virtual LAN (VLAN) tagging is supported on the Brocade FR4-18i and all 7500 platforms bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). ge port Specifies the port number of the GbE port on the blade - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 619
64 bytes. In an IPv4 environment, the ICMP/IP header occupies 28 bytes. In an IPv6 environment, it occupies 48 bytes. The total size, including ICMP/IP headers (28 or 48 GbE port. Valid arguments include: Specifies the source IP address that originates the ping request. IPv6 addresses are supported. - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 620
Specifies the default packet size to a fixed size in bytes. The default is 64 bytes. In an IPv4 environment, the ICMP/IP header occupies 28 bytes. In an IPv6 environment it occupies 48 bytes. The total size, including ICMP/IP headers (28 or 48 bytes without IP options) cannot be greater than the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 621
2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255 Ping Statistics for 2007:7:30:32:227:77:0:60: Packets: Sent = 4, Received = 4, Loss = 0 ( 0 percent loss) Min RTT = 0ms, Max RTT = 1ms Average = 0ms To trace the IP router hops used to reach the remote (with packet size specified): switch:admin - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 622
to set the debug level and verbose level of port modules. Note The execution of this command is port modules; valid values are 1 to 5. vbs_lvl Specify the verbose level to be set for port modules; valid values are 1 to 5. Examples To set debug level and verbose level of port modules: switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 623
the slot number of the port to be disabled, followed by a slash (/). port Specify a port number to be disabled, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. Examples To disable a port: switch:admin> portdisable 2/4 See Also portCfgPersistentDisable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 624
be sent to indicate a state transition: RSCN, SNMP trap, Web pop-up window. This command fails if the port's switch is disabled, the port's blade is not fully enabled (faulted, powered off, or disabled), or if the port is persistently disabled. Notes The front panel LED of an enabled and online - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 625
place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Operands none Examples To display error counters for ports on a switch: switch:admin> porterrshow frames enc crc crc too too bad enc disc link loss loss frjt fbsy tx rx in err g_eof shrt long - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 626
44k 0 0 0 0 0 0 32 0 7 6 9 0 0 9: 38m 37k 0 0 0 0 0 0 29 0 7 6 10 0 0 10: 34 38 0 0 0 0 0 0 12 0 0 4 8 0 0 11: 0 0 0 0 0 0 0 0 39k 0 39k 6.6k 13k 0 0 12: 777 37 0 0 0 0 0 0 13 0 0 5 10 0 0 13: 2.2k 38 0 0 0 0 0 0 12 0 0 5 10 0 0 14: 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 15: 0 0 0 0 0 0 0 0 0 0 0 0 4 0 0 16 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 627
. Operands none Examples To display the port status for all ports in the switch: switch:user> portflagsshow Slot Port SNMP Physical Flags 1 0 Online In_Sync PRESENT ACTIVE E_PORT G_PORT LOGIN LED ACCEPT 1 1 Online In_Sync PRESENT ACTIVE E_PORT G_PORT LOGIN LED ACCEPT 1 2 Online - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 628
details. This command is retained for legacy reasons only and is longer supported on most current platforms. On some of the unsupported platforms, the value is 10. -ports itemlist Specify a list of user ports on which to run the test. If omitted, all the active ports in the switch are assumed. For - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 629
port log. You might want to clear the port log before triggering an activity so that the log displays only the log events related to that activity. If the port log is disabled, portLogClear enables it. The port To clear the port log: switch:admin> portlogclear switch:admin> portlogshow port log is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 630
to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To display the current port log configuration: switch:admin> portlogconfigshow max portlog entries = 8192 See Also portLogResize 602 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 631
portlogdisable Description Use this command to disable the port log facility. Note The execution of this command Command Availability" for details. Operands none Examples To display the port log facility: switch:admin> portlogdisable See Also portLogEnable Fabric OS Command Reference 603 53 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 632
port log is disabled Refer to the portLogClear command for more information. For a full explanation of the information displayed by this command, refer to the Fabric OS Administrator's Guide a nonzero value to display the saved port log from the last switch fault. Refer to upTime for conditions that - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 633
log files in the switch firmware which can save up to 8,192 entries. Refer to portLogConfigShow to display the current port log size. Once the log is full, the newest log entries displace the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some device-to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 634
restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To enable the port log facility: switch:admin> portlogenable See Also portLogDisable 606 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 635
To display information about port log events: switch:admin> portlogeventshow ID Event 16 reject 0 17 busy 0 18 ctin 0 19 ctout 0 20 errlog 0 21 loopscn 0 22 create 0 23 debug 1 24 nbrfsm 0 25 timer 0 26 sn 0 27 fcin 0 28 fcout 0 29 read 0 30 write 0 48 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 636
. df_sz The default frame size for this login. cos Class of Services supported. This can be a combination of the following bits: 4 Class 2 is supported. 8 Class 3 is supported. Further information about each login is displayed after these columns, including the Port ID of the well-known - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 637
of the environmental monitor. A setting of 1 will enable logging of Port Discovery parameters. The PDISC log is disabled by default. Note The set the debug_pdisc_flag. The default is 0. Examples To set the debug_pdisc_flag: switch:admin> portlogpdisc 1 PDISC log setting = 1 See Also none Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 638
restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands none Examples To enable the port log: switch:admin> portlogreset See Also none 610 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 639
entries is less than the already configured port log size, there is no change. Note The port log entries. The valid range of values is 32,768 to 65,536 for the Brocade 7500, 7600, 48000, DCX, and DCX-4S. For all other platforms, the range is 8,192 to 16,384. Examples To resize the portlog: switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 640
file in the switch firmware, which can save up to 32,768 entries. Refer to portLogConfigShow to display the current port log size. Once the log has reached the maximum size, new entries displace the oldest ones. The port log captures switch-to-device, device-to-switch, switch-to-switch, some device - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 641
an exchange. Exchange error. Exchange state. Frame payload. Displays the port number that logged the event. Defined by the event. Displays a value defined by the event as follows: I/O control command code. Frame payload size. New state (see state codes below). New physical state (see pstate codes - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 642
FC-PH busy reason. ctin Argument 0 is divided into two 16-bit fields: [A] a bit map indicating whether subsequent arguments are valid (0001 means argument 1 is valid, 0003 means arguments 1 and 2 are valid). [B] the CT-based service command code. Argument 1 is the first word of the CT payload - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 643
4 Faulty 5 E_Port 6 F_Port 7 Segmented pstate AC Active State LR1 Link Reset: LR Transmit State LR2 Link reason 8001 Retry loop init. 8002 Start loop after gaining sync. 8003 Restart loop after port reset. 8004 LIP when a loop hangs. 8005 Restart loop if LIP received when - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 644
to display. Only the most recent count entries are displayed. This operand is optional. saved Specify a nonzero value to display the saved port log from the last switch fault. Refer to upTime for a list of conditions that cause a fault. The count is ignored when the saved log is displayed. This - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 645
details. Operands This command has the following operands: portid Specify the number of the port for which to display the log. Examples To display a port log for port 14: switch:user> portlogshowport 14 time task event port cmd args 08:35:28.483 tFabric scn 14 0 08:35:27.899 tShell - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 646
values corresponding to different log types can be obtained by running portLogEventShow. Examples To disable event 2 from reporting to the port log: switch:admin> portlogtypedisable 2 See Also portLogDisable, portLogEventShow, portLogTypeEnable 618 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 647
type to be enabled. The values corresponding to different log types can be obtained by running portLogEventShow. Examples To enable event 2 to report to the port log: switch:admin> portlogtypeenable 2 See Also portLogEventShow, portLogTypeDisable Fabric OS Command Reference 619 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 648
operation of the switch by sending frames from the port N transmitter and looping them back into the same port's receiver. The 0x25, 0x7f, 0x6e, 0x9a, .... Notes This command does not support High Availability (HA). The Brocade DCX series cannot negotiate speeds of 1 Gbps. The execution of - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 649
blade ports to test. By default, all of the blade ports in the specified slot (--slot) are used. See itemList for more information on the itemlist parameter. Examples To run a functional test in default mode: switch , contact Technical Support. DATA Data received does not match the data - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 650
2 portLoopbackTest TIMEOUT XMIT See Also itemList Did not receive a frame in the given timeout period. Frame transmission failure. 622 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 651
the DestID is on another blade or another switch (i.e., another blade has an E_Port leading to another switch). A port mirroring connection on FL_Ports mirrors all traffic originating from or terminating at this FL_Port. Port mirroring does not support ALPA granularity port mirroring. Setting up - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 652
shows twice the amount of traffic, because the mirror port transmits the frame and also receives the frame. The port mirroring feature is not supported on all platforms. Refer to the Fabric OS Administrator's Guide for more information. The port mirror feature is blocked in Virtual Fabric mode. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 653
portMirror 2 To delete a port mirror connection between a local switch port and a remote switch port: switch:admin> portmirror --delete 0x011400 0x240400 To display port mirror connections: switch:admin> portmirror --show Number of mirror connection(s) configured: 2 Mirror_Port SID DID State - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 654
be confused with the world wide port name. Like all other configurable port attributes, port name persists across reboots and power cycles. It is not affected bladed systems. Use switchShow to display a list of valid ports. name Specify a port name. The port name is a character string up to 32 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 655
the switch. Output includes the number of bytes received plus the number of bytes transmitted per interval. Throughput values are displayed as either bytes, kilobytes (k), megabytes (m), or gigabytes (g). Values are always rounded down. The data is displayed in 8 or 16 columns, one column per port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 656
, 0x0100 indicates port 8 on the ASIC pair. The arrangement of ports on an ASIC pair is specific to the system type. For any active port, this table has only Bit 16 set (value 0x10000), indicating this port always routes broadcast frames to the embedded port, for handling by the firmware. Note The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 657
portRouteShow 2 Examples To display the routing tables for a port: switch:user> portrouteshow 4/15 port address ID: 0x02bf00 external unicast routing table: 1: 0x4 (vc=3) 2: 0x10000 (vc=0) internal unicast routing table: 60: 0x8000 (vc=2) 63: 0x1000 (vc=5) broadcast routing table: 0x10000 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 658
• Static routes on the IP interfaces • Fibre Channel over IP (FCIP) tunnel configuration settings • FCIP tunnel statistics and history • Port Mode information • FICON parameters • VLAN tag configuration • Byte Stream settings • FTRACE settings • Inband management configuration The following general - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 659
case of LD mode, the user configured distance and actual distance also are displayed. See portCfgLongDistance for information on long distance levels. portSpeed The port's fixed speed (1, 2, 4, or 8 Gbps) or negotiated speed (N1 Gbps, N2 Gbps, N4 Gbps, N8 Gbps or AN). LE domain The LE domain ID - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 660
fabric attached to this EX_Port. Includes the domain ID and WWN of the principal switch. BB XLate Information on the xlate (translate) phantom domain presented at this port. Includes the preferred (if not active) or actual (if active) domain ID for the xlate phantom domain and the WWN of the xlate - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 661
In Fabric OS v6.2.0 or later, each GbE port is associated with a TCP history, which tracks fciptunnel -hist command. This command displays a maximum of 16 entries. Once the maximum history length is reached, mark Sendw Cwnd Size of sender congestion window (bytes) Rx win Size of receive window - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 662
connection (CONTROL or DATA) LPort Local port RPort Remote port OOO Counter of out-of-order segments feature. Byte streaming allows the Brocade switch to communicate with third party referenced a single TCP segment. Max Frame Size The maximum size of an FCIP frame received. Max Segments - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 663
This command supports the following port options: slot For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). [ge]port Specify the port number to be displayed relative to its slot for bladed systems. For GigE ports, the ports are numbered - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 664
] The following arguments are supported with ficon: -globals Displays general FICON controls and statistics. -images Displays discovered Images (FCUB). -emul Displays emulated FDCBs. -active Displays active FDCBs. -epcb Displays Emulation Control Block (port specific). -fhpb -fdpb adrs - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 665
12 Lr_in: 4 Lr_out: 7 Ols_in: 2 Ols_out: 3 Frjt: 0 Fbsy: 0 Port part of other ADs: No To view xlate domains, you must be running a Brocade 7500 or a chassis with an FC4-18i blade. Note that the Front Domain ID is what is shown: switch:admin> portshow 8/4 portName: portHealth: No Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 666
ACTIVE G_PORT U_PORT EX_PORT LOGICAL_ONLINE LOGIN portType: 10.0 portState: 1 Online portPhys: 6 In_Sync portScn: 1 Online Trunk master port port Fbsy: 0 Port part of other ADs: No To display IPv4 interfaces on a GbE port: switch:admin> portshow ipif 10/ge0 Slot: 10 Port: ge0 Interface - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 667
.168.255.26 0 Interface, 192.168.255.0 255.255.255.0 192.168.255.27 0 Interface, 172.16.123.231 255.255.0.0 192.168.255.25 1 To display ISCSI Port WWN and Sessions: switch:admin> portshow iscsi 2/ge0 GE Port 2/ge0 Port WWN Sessions 50:06:06:9e:40:09:a2:00 0 To display the connection - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 668
Tagging Not Configured TCP Byte Streaming on Status : Inactive Connected Count: 0 Port: ge1 Tunnel ID 0 Tunnel Description "This is a test Description of this ): 0 VLAN Tagging Not Configured TCP Byte Streaming on Status : Active Connected Count: 3 Uptime 23 minutes, 53 seconds FC control traffic - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 669
activity detected 0 s idle connection probe interval 1 s timeout 10 s To display the performance information on an FCIP tunnel: switch:admin> portshow fciptunnel 9/ge0 0 -perf Slot: 9 Port Bytes 2065 Bps 30s avg, 3695 Bps lifetime avg 1.64 compression ratio FC control traffic TCP connection: Local 10 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 670
information on an FCIP tunnel on a GbE port: switch:admin> portshow fciptunnel 9/ge0 0 -ipsec Slot: 9 Port: ge0 Tunnel ID 0 Tunnel Description "This , L2CoS (Control): 1, L2CoS (data): 0 TCP Byte Streaming on Status : Active Connected Count: 1 Uptime 2 hours, 13 minutes, 58 seconds IKE Policy 1 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 671
history after the connection was severed: Switch:admin> portshow fciptunnel ge1 0 -hist Port: ge1 Tunnel ID 0 Tunnel Description Marking (Data): 0 VLAN Tagging Not Configured TCP Byte Streaming on Status : Active Connected Count: 2 Uptime 6 minutes, 39 seconds TCP Connection History: ge1 | - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 672
VLAN Tagging Not Configured TCP Byte Streaming on Status : Active Connected Count: 1 Uptime 3 minutes, 35 seconds TCP 0 0 1 0 0 0| To reset the TCIP statistics: Switch:admin> portshow fciptunnel ge1 0 -snapstart Port: ge1 Tunnel ID 0 Tunnel Description "This is a test Description - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 673
Active Connected Count: 1 Uptime 5 minutes, 26 seconds TCP data and control statistics snapshots have been reset for tunnel 0 To show the ARP entries with local MAC address for a GbE port: switch:admin> portshow arp 12/ge0 -lmac Port 26366 iac_credits_posted: 32 iac_credits_queued: 0 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 674
tuning Credit processing: ip_api_data_credit_target = 32 ip_api_data_credit_ratio = 80 ip_api_credit_time = 1 Pre-Shared Key testingFIPSandIPSec To display QoS Mappings: switch:admin> portshow fciptunnel 9/ge0 0 -qosmap Slot: 9 Port: ge0 Tunnel ID 0 Tunnel Description "This is a - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 675
traffic TCP connection: Local 192.168.32.1:4129, Remote 192.168.32.2:3225 Data transfer TCP connection: Local 192.168.32.1:4130, Remote 192.168.32.2:3226 To display FICON EPCB for a GbE port 0 tunnel ID 1 with post display clearing of relevant statistics: switch:admin> portshow ficon ge0 1 -epcb - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 676
IP Address NetMask MTU 0 192.168.255.2 255.255.255.252 1500 To display the routes that use internal management interfaces. switch:admin> portshow iproute ge1 Port: ge1 IP Address Mask Gateway Metric 192.168.112.0 255.255.255.0 192.168.112.61 0 Interface 192.168.255.0 255 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 677
portStats64Show 2 portStats64Show Synopsis Description Displays the 64-bit hardware statistics for a port. portstats64show [slotnumber/]portnumber Use this command to display the following hardware statistics for a port. Two integers are reported for most values. In such cases, the top word is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 678
transmitted. stat64_inputBuffersFull Occasions on which input buffers are full. stat64_rxClass1Frames Class 1 frames received. Note The slot for bladed systems. Use switchShow to display a list of valid ports. Examples To display the 64-bit hardware statistics for a port: switch:user> - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 679
portStats64Show 2 er_bad_eof 0 top_int : Frames with bad end-of-frame 0 bottom_int : Frames with bad end-of-frame er64_enc_out 0 top_int : Encoding error outside of frames 9131157 bottom_int : Encoding error outside of frames er64_disc_c3 0 top_int : Class 3 frames discarded 0 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 680
the slot number of the port to be cleared, followed by a slash (/). port Specify a port number to be cleared, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. Examples To clear hardware statistics for a port: switch:admin> portstatsclear 4/15 See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 681
port hardware statistics counters. Some counters are platform- or port-specific and display only on those platforms and ports. All statistics have a maximum 32 of times that the port was unable to transmit frames because the transmit BB credit was zero for each of the port's 16 Virtual Channels (VC - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 682
Availability" for details. This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port to be displayed, followed by a slash (/). [ge]portnumber Specifies the number of the port for which to display the statistics, relative to its slot for - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 683
to display statistics only for the specified FCIP tunnel. Examples To display the basic set of statistics for port 13 on a DCX backbone: switch:admin> portstatsshow 13 stat_wtx 1979747673 4-byte words transmitted stat_wrx 618367 4-byte words received stat_ftx 1958745847 Frames transmitted - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 684
ip 0 pkt dropped due to wantov 0 ve to fcip_entity pkts 0 ve to fcip_entity bytes To display port statistics for all IP addresses, slot 8, and GbE port 1: switch:admin> portstatsshow ip 8/ge1 ip_err_crc ip_err_hdr_cksum ip_err_tcp_data_chksum 0 IP CRC Errors 0 IP Checksum Errors 0 IP TCP Data - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 685
is persistent across reboots and power cycles. To undo a previous port swap, execute portSwap again on the same two ports. portSwap information is kept in relative to its slot for bladed systems. Examples To swap area numbers between a pair of ports: switch:admin> portswap 1/3 2/5 portswap - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 686
disabled state of the portswap feature is persistent across reboots and power cycles. Enabling or disabling the portswap feature does not affect previously . Operands none Examples To disable the portswap feature: switch:admin> portswapdisable See Also portSwap, portDisable, portEnable, portShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 687
The enabled state of the portswap feature is persistent across reboots and power cycles. Enabling or disabling the portswap feature does not affect previously details. Operands none Examples To enable the portswap feature: switch:admin> portswapenable See Also portSwap, portDisable, portEnable, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 688
to display the enabled state of the portswap feature, as well as port and area information for ports whose area number differs from the default area number. The default area number of a port is the same as its switch port number. Note The execution of this command is subject to Virtual Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 689
Synopsis Performs a functional test of a switch in a live fabric. porttest [-ports itemlist][-iteration count][-userdelay time][-timeout time][-pattern pattern] [-patsize size][-seed seed][-listtype porttype] Description Use this command to isolate problems in a single replaceable element and to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 690
the dataTypeShow command to view the patterns supported with portTest. For each pattern, RANDOM (type=11) -patsize size Specifies the size of the pattern. The default pattern size is 1024 bytes. The range ports. Examples To run a functional test on an active switch: switch:admin> porttest -ports - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 691
is assumed. Refer to the itemList help page for further details. Examples To display information from portTest: switch:admin> porttestshow 1 Port 1 : PASS PortType: OTHER PortInternalState: INIT Pattern: 0x0 Seed: 0x0 TotalIteration: 0 TotalFail: 0 StartTime: NONE StopTime: NONE Timeout - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 692
, displays the trunk index. Trunk Area On single processor switches only, displays the TA of the trunk group. ptA->ptB ptA indicates the local user port; ptB indicates the remote user port. sp Port speed in Gbps. bw Port bandwidth in Gbps. 664 Fabric OS Command Reference 53-1001186 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 693
supported on ports 16 - 47. 12. Ports included in a TA share the same port index. The original port index may be removed in the process. This means that D, I zones referring to these indices are no longer part of the switch. For details and workarounds, refer to the Fabric OS Administrator's Guide - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 694
for the static TA to be created. The TA must fall within the 8 port trunk group starting from port 0 on a switch or blade. The TA must be a default area of an existing port in a given port group. However, you may add ports to the trunk group even when a trunk group has already been assigned by - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 695
ports 36, 37, 38 and 39. 3. Re-enable ports 36-39 by executing portenable port for each port in the TA. 4. Show switch/port information: switch : 100 Area Port Media Speed State Proto 0 0 -1 1 -2 2 -3 3 -4 4 -5 5 -6 6 -7 7 -8 8 id 9 9 -10 10 -11 11 -12 12 -13 13 -14 14 -15 15 -16 16 -17 17 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 696
N4 Online N4 Online N4 Online N4 Online F-Port F-Port F-Port F-Port 20:14:00:05:1e:41:4b:4d 20:15:00:05:1e:41:4b:4d 20:16:00:05:1e:41:4b:4d 2 NPIV public 5. Display TA enabled port configuration: switch:admin> porttrunkarea --show enabled Port Type State Master TA DA 36 -- -- -- 37 36 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 697
See Also 4. Enable ports 13 and 14: switch:admin> portenable 10/13 switch:admin> portenable 10/14 5. Show the TA port configuration after enabling the ports: switch:admin> porttrunkarea --show enabled Slot Port Type State Master TI DI 10 13 F-port Master 10/13 125 125 10 14 F-port Slave 10/13 125 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 698
of ports: switch:user> portzoneshow [OUTPUT TRUNCATED] PORT: 160 (160) Offline PORT: 161 (161) Offline PORT: 162 (162) Offline PORT: 163 (163) Offline PORT: 164 (164) Offline PORT: 165 (165) Offline PORT: 166 (166) Offline PORT: 167 (167) Offline PORT: 168 (168) FL-Port 0x4332000a PORT: 169 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 699
power, but cannot be powered off by the software. For example a missing blower FRU may change the power computation enough to affect how many slot blades can be powered details. Operands none Examples To modify the power-off list order: switch:admin> powerofflistset Slot Current POL 10 1st - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 700
2 3rd slot to be powered off: (3..10) [8] 3 4th slot to be powered off: (4..10) [7] 4 5th slot to be powered off: (7..10) [7] 10 6th slot to be powered off: (7..9) [8] 9 7th slot to be powered off: (7..8) [8] 8 8th slot to be powered off: (7..7) [7] 7 Old POL New POL Power Off Order 10 1 1st - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 701
power causes the CP board processors to cease executing the firmware. For example, if only one power supply is available to power a fully loaded system and the power on the hardware platform. Control processor (CP) blades are not included in the power-off list. The execution of this command is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 702
"Command Availability" for details. Operands none Examples To view the status of the power supplies: switch:admin> psshow Power Supply #1 is OK DELTA DPS-1001AB-1E 23000000601 S1 Power Supply #2 is faulty DELTA DPS-1001AB-1E 23000000601 S1 Power Supply #3 is OK DELTA DPS-1001AB-1E 23000000601 S1 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 703
failover without affecting any Fibre Channel ports is to issue the hafailover command. This operand is optional. Examples To reboot a Control Processor: switch:admin> reboot Warning: This command is being run on a control processor (CP) based system and will cause the active CP to reboot. Are you - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 704
" and Appendix A, "Command Availability" for details. Operands none Examples To display a list of routing-related commands: switch:admin> routehelp aptpolicy bcastshow dlsreset dlsset dlsshow fspfshow interfaceshow iodreset ioddelayreset ioddelayshow iodset iodshow linkcost lsdbshow nbrstateshow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 705
the maximum size is 256 Kilobytes. Notes The effective security DB size is the lowest supported by the fabric. The presence of a Standby CP that runs an earlier version of the operating system will drop the effective security DB size on an Active CP that runs Fabric OS v6.2.0. The Brocade 200E is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 706
is 8 characters and maximum 40 characters. Setting up secret keys does not initiate DH-CHAP authentication. If switch is configured to do DH-CHAP, it is performed whenever a port or a switch is enabled. Warning: Please use a secure channel for setting secrets. Using an insecure channel is not safe - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 707
peer that authenticates to peer. 3. Local secret: The local secret that authenticates peer. Press Enter to start setting up shared secrets > Enter WWN, Domain, or switch name (Leave blank when done): 10:00:00:60:69:80:05:14 Enter peer secret: Re-enter peer secret: Enter local secret: Re-enter - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 708
on a switch, including Public Key Infrastructure (PKI) based certificates and supports IPV4 and IPV6 addresses. Use this command to do the following: • Generate a public/private key pair. • Delete a public/private key pair. • Generate a CSR. • Delete a CSR. • List existing certificates on a switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 709
, performance degrades with size. The keys are San Jose". If the locality consists of multiple words, it must be enclosed in double quotes. -org organization Specifies the organization. Provide the full name, for example, Brocade the content of the CSR on the switch without page breaks. Use the pipe - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 710
your input. -ldapcacert file name Exports an LDAP CA certificate from the switch to a remote host. -certname certificate name Specifies the name of the Use this command to import an LDAP CA certificate from the server or to download a certificate issued by a CA after sending the CSR to the CA. - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 711
all existing PKI-based certificates on the switch. The following operands yes, y, no, n): [no] y Select key size [1024 or 2048]: 1024 Generating new rsa public/ interactive mode: switch:admin> seccertutil gencsr -country US -state California -locality "San Jose" \ -org Brocade -orgunit software -cn - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 712
[filename]. Certificate file in configuration has been updated. Secure http has been enabled. To import a PKI-based certificate with configure and enable option in non-interactive mode: switch:admin> seccertutil import -config swcert -enable https -protocol ftp \ -ipaddr 195.168.38.206 -remotedir - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 713
ldap ca certificate files: Sample.cer To display the content of the CSR one page at a time: switch:admin> seccertutil showcsr | more To display the content of a certificate: switch:admin> seccertutil show certificate_name See Also none secCertUtil 2 Fabric OS Command Reference 685 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 714
not Virtual Fabric-capable, the security database is limited to 1 Megabyte. For switches running earlier versions of Fabric OS (up to v5.3.0), the maximum size is 256 Kilobytes. The effective security DB size is the lowest supported by the fabric. The presence of a Standby CP that runs an earlier - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 715
by technical support staff. The information displayed may not be supported between releases and :e0 (local switch) Stamp 0 ----The latest zone transaction-last retVal from zone: not used last zone size when calling zone Qeury0 Security Active DataSize 35 bytes -----Domain State----- Active Sum 215b - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 716
2 secGlobalShow Security Defined DataSize 35 bytes Define Sum 215b Zone Size (include enabled configuration) 312 bytes Zone sum e04b215b sec_db: free primaryDLPhase 0 ----wwnDL State----- pid tid key sec usec --------- LOG CACHE --------14:08:50 813905136 secipadm_ipchange - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 717
To display a list of security commands: switch:admin> sechelp fipscfg pkicreate pkiremove pkishow secactivesize secauthsecret objects Displays existing public key infrastructure (PKI) objects Displays size of the active (security) database Creates/Manages DHCHAP secret key details Creates/ - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 718
to abort changes to policy creation and modification operations from all the switches if a fabric-wide consistency policy is not set for the particular policy is enabled, this command can be issued only from the Primary FCS switch. Only the user who made the changes to the defined database may use - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 719
Defined Security Policy Set. Synopsis secpolicyactivate Description Use this command to activate the current defined security policy to all switches in the fabric. This activates the policy set on the local switch or all switches in the fabric depending on the fabric-wide consistency policy. If - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 720
, when you create a DCC lockdown policy on a logical switch, the DCC policy is created for each port in the chassis, even though the ports are not currently present in the local logical switch. This is done to provision the DCC policy for the ports that may be moved later. If a policy seems stale - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 721
does not stop access to the switch. The device port name is specified by its port WWN string. The switch and port index combination must be in the switch port format, where switch can be specified as a WWN, a domain, or a switch name, and port is specified by port numbers separated by commas and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 722
, when you create a DCC lockdown policy on a logical switch, the DCC policy is created for each port in the chassis, even though the ports are not currently present in the local logical switch. This is done to provision the DCC policy for the ports that may be moved later. If a policy seems stale - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 723
DCC_POLICY does not stop access to the switch. The device is specified by its port WWN. The switch and port combination must be in the switch port format switch can be specified using a WWN, domain, or switch name. port can be specified by port numbers separated by commas and enclosed in either - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 724
10:00:00:05:1e:35:cd:ef 10.32.69.117 10.20.30.117 "nSW4100_98" 3. Create a SCC policy that includes switches with domain IDs 2 and 4. switch:admin> secpolicycreate "SCC_POLICY","2;4" SCC_POLICY has been created. 4. Activate the policy. switch:admin> secpolicyactivate About to overwrite the current - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 725
defined security database. Run secPolicyActivate to delete the policies from the active security policy list. Deleting a security policy does not cause any policies become stale when the ports are removed from a logical switch. SCC_POLICY Deletes the Switch Connection Control policy from the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 726
2 secPolicyDelete To delete all stale DCC policies in the fabric: primaryfcs:admin> secpolicydelete ALL_STALE_DCC_POLICY About to clear all STALE DCC policies ARE YOU SURE (yes, y, no, n): [no] y See Also secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDump, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 727
display, enclosed in double quotation marks. The name for an active database is "Active"; the name for a saved, defined database is "Defined". :30:15:5c 1 primaryfcs 2 No 10:00:00:60:69:30:1e:62 4 switch ACTIVE POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:30 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 728
all security policies in the active database: switch:admin> secpolicydump "active" ACTIVE POLICY SET FCS_POLICY Pos :8b:13:5e:8e To display all security policies in the defined database: switch:admin> secpolicydump "Defined" DEFINED POLICY SET FCS_POLICY Pos Primary WWN DId swName - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 729
To display the SCC policies in the defined database: switch:admin> secpolicydump "Defined","SCC_POLICY" DEFINED POLICY SET SCC_POLICY display the SCC policies in the active database: See Also switch:admin> secpolicydump "Active","SCC_POLICY" ACTIVE POLICY SET SCC_POLICY WWN DId - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 730
:69:00:00:13 3 switch73. 3 No 10:00:00:60:69:00:00:5a 2 switch60. To move Backup FCS switch from position 3 to position 1 in the FCS list (non-interactively): switch:admin> secpolicyshow ACTIVE POLICY SET 1 Yes 10:00:00:05:1e:39:5f:67 2 switch1 2 No 10:00:00:05:1e:04 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 731
:35:cd:ef 200 switch3 2 Yes 10:00:00:05:1e:39:5f:67 2 switch1 3 No 10:00:00:05:1e:04:ef:0e 4 switch2 switch:admin> secpolicyactivate About to overwrite the current Active Policy Set. ARE YOU SURE (yes, y, no, n): [no] y secpolicyactivate command was completed successfully - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 732
of devices associated with a specific switch and port combination. The device is specified with a WWN string. The switch and port combination must be specified in the switch port format where switch can be specified by switch WWN, domain, or switch name. The port 704 Fabric OS Command Reference - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 733
to specify the port values: (1-6) Selects ports 1 through 6. (*) Selects all ports on the switch. [3, 9] Selects ports 3 and 9 and all devices attached to those ports. [1-3, 5] Selects ports 1 through 3 and 5 and all devices attached to those ports. [*] Selects all ports on the switch and devices - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 734
memory. Secpolicysave saves the modified SCC, DCC, and FCS policies to the Defined Security Policy Set on the local switch. Notes This command is always a local switch operation. A fabric-wide consistency configuration does not affect the behavior of this command. The execution of this command is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 735
have to be capitalized like regular policy names, but they are case-sensitive. Examples To display all security policies from active databases: switch:admin> secpolicyshow "active ACTIVE POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs 2 No 10 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 736
WWN DId swName 1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs 2 No 10:00:00:60:69:30:1e:62 4 switch fddCfg, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete, secPolicyDump, secPolicyRemove, secPolicySave 708 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 737
" and Appendix A, "Command Availability" for details. Operands When invoked without operands, this command displays the security statistics on the local switch or chassis. The following operands are optional: name Specify the name of a security statistic you would like to reset. The specified - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 738
are grouped together. domain(s) Specify a list of domain IDs on which to reset the security statistics. Specify an asterisk (*) to represent all switches in the fabric or specify a list of domains, separated by semicolons and enclosed in quotation marks. This option can only be executed when an - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 739
Commands" and Appendix A, "Command Availability" for details. Operands When invoked without operands, this command displays the security statistics on the local switch or chassis. The following operands are optional: name Specify the name of the security statistic you want to view. The specified - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 740
are grouped together. Specify one or more domains for which to display the security statistics. Specify an asterisk (*) in quotation marks to represent all switches in the fabric or specify a list of domains separated by semicolons. This option can only be executed when an FCS policy is enabled and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 741
sensorshow Description Use this command to display the current temperature, fan, and power supply status and readings from sensors located on the switch. The actual location of the sensors varies, depending on the switch type. Note The execution of this command is subject to Virtual Fabric or - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 742
that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. If a logical switch FID is deleted, users logged into that switch are logged out. Operands This command has the following operand: FID Specifies the fabric ID of the logical - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 743
volume of messages, degrading the system response time. The set of supported modules and their current debug levels are displayed by the command dbgShow the debug level for a module named NS to value 3: switch:admin> setdbg NS 3 switch:admin> dbgshow NS Module NS, debug level = 3, verbose level - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 744
CP modem serial port. When the CP is active and dial-in command is not supported on the Brocade DCX backbone. Operands The optional operands are as follows: -e Enables modem dial-in. -d Disables modem dial-in. Examples To disable modem dial-in to a CP: switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 745
are case-sensitive. level Specify the verbose level (0 to 9). Examples To set the verbose level of a module named NS to value 3: switch:admin> setverbose NS 3 switch:admin> dbgshow NS Module NS, debug level = 0, verbose level = 3 See Also dbgShow, setDbg Fabric OS Command Reference 717 53 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 746
information, relative to its slot for bladed systems. Use switchShow for a list of valid ports. This operand is optional; if omitted, this command displays a summary of all SFPs on the switch. -all Displays detailed data for all available SFPs on the switch. This operand is not compatible with - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 747
: -Area 16: id (sw) Vendor: AGILENT (output truncated) Serial No: 0105091301045274 To display detailed SFP information for a Finisar "smart" SFP: switch:user> sfpshow RX Power: 199.6 uWatts TX Power: 235.2 uWatts To display detailed information for GbE port 0 on a Brocade 7500: switch:admin> - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 748
2 sfpShow To display detailed information for GbE port 0 on an FR4-18i router blade: CS48000:admin> sfpshow 10/ge0 Identifier: A00143427 Date Code: 020511 To display all SFP information: switch:user> sfpshow -all Port 0: Identifier: 3 SFP Connector: 7 LC Transceiver: 050c402000000000 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 749
See Also Length 9u: 0 (units km) Length 9u: 0 (units 100 meters) Length 50u: 30 (units 10 meters) Length 62.5u:15 (units 10 meters) Length Cu: 0 (units 1 meter) Vendor Name: IBM Vendor OUI: 08:00:5a Vendor PN: IBM42P21SNY Vendor Rev: AA10 Wavelength: 0 (units nm) Options: 001a - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 750
control on the console serial port, it must be executed from a session that is logged in from the console serial port. This command cannot run from power cycles. Notes On dual-CP systems, a reboot on the standby CP is required for this command to take effect. No action is required on the active CP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 751
serial port. This command cannot run from a Telnet session. This setting is saved in the configuration database; therefore, it is persistent across reboots and power on the active CP. If flow control is enabled and if the console output is suspended for an extended period of time, the switch might - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 752
has the following operand: slotnumber Specify the slot number of the blade to be powered down. This operand is required. Examples To power off blade unit 3: switch:admin> slotpoweroff 3 Slot 3 is being powered off See Also powerOffListSet, powerOffListShow, slotPowerOn, slotShow 724 Fabric OS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 753
This command has the following operand: slotnumber Specify the slot number of the blade to be powered on. This operand is required. Examples To power on blade unit 3: switch:admin> slotpoweron 3 Powering on slot 3. See Also slotPowerOff, slotShow Fabric OS Command Reference 725 53-1001186 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 754
46 CR4S-8 core blade 50 CP8 control processor blade 52 Core8 switch blade 37 FC8-16 port blade 55 FC8-32 port blade 51 FC8-48 port blade Status Displays the status of the blade as one of the following: VACANT The slot is empty. INSERTED, NOT POWERED ON The blade is present in the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 755
Power efficiency in Watts/port and Watts/Gb. -m In addition to the basic slot status view, displays the Brocade model name for each blade. Examples To display a basic view of all slots and their status: switch:user> slotshow Slot Blade Type ID Status 1 SW BLADE 51 FAULTY 2 SW BLADE - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 756
BTU) Power Efficiency: 9.91 watts per port, 2.48 watts per Gb To display Brocade model names for each blade in a Brocade DCX: switch:user> slotshow -m Slot Blade Type ID Model Name Status 1 AP BLADE 33 FA4-18 ENABLED 2 SW BLADE 55 FC8-32 ENABLED 3 SW BLADE 37 FC8-16 ENABLED - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 757
names for each blade in a Brocade DCX-4S: switch:user> slotshow -m lot Blade Type ID Model Name Status 1 SW BLADE 51 FC8-48 ENABLED 2 SW BLADE 39 FC10-6 ENABLED 3 CORE BLADE 46 CR4S-8 ENABLED 4 CP BLADE 50 CP8 ENABLED 5 CP BLADE 50 CP8 ENABLED 6 CORE BLADE 46 CR4S - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 758
to manage the configuration of the SNMP agent in the switch. The configuration includes SNMPv1 and SNMPv3 configuration, access control list (ACL), MIB capability, system group, and security level settings. The command supports set, reset to default, and display operations. All values successfully - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 759
be in the range of 2 to 16 characters. The default values for the community on the primary FCS switch only, and only the primary FCS switch propagates changes across the fabric three entries for snmpadmin and snmpuser respectively are supported. Separate default passwords are provided for creation - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 760
be between 2 and 32 characters long. The primary switch and the nonprimary switches; unlike community strings, user names and passwords are not distributed for other switches in nonzero IP octets. For example, an ACL of 192.168.64.0 enables access by any hosts that start with the specified octets - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 761
Specifying yes means the SNMP management application can receive SW-TRAPS from the switch. The default value is yes. You may also turn individual SW Traps sysContact The contact information for this system (switch). The default value is Field Support. Refer to the definition of sysDescr, - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 762
trap recipient configured yet To set the SNMPv1 configuration of a switch: switch:admin> snmpConfig --set snmpv1 SNMP community and trap recipient size must be between 2 and 16 - please re-enter Community (rw): [OrigEquipMfr] Trap Recipient's IP address: [1080::8:800:200C:1230] 10.32.147 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 763
--default systemGroup ***** This command will reset the agent's system group configuration back to factory default ***** sysDescr = Fibre Channel Switch sysLocation = End User Premise sysContact = Field Support authTraps = 0 (OFF) ***** Are you sure? (yes, y, no, n): [no] y To set the security level - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 764
OS MIB Reference SW_v5_x.mib, "Switch Management Information & Switch Enterprise Specific Trap" RFC1157, "A Simple Network Management Protocol (SNMPv1)" RFC1213, "Management information Base for Network Management of TCP/IP-based internets: MIB-II" RFC2574, "User-based Security Model (USM) for - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 765
be executed from the default switch. Ports that are not on the default switch cannot be tested. Valid port connections for this test are: • From the default switch to legacy switches that do not support Virtual Fabrics. • From the default switch to a switch that supports Virtual Fabrics but has the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 766
to test or false failures can occur. If multiple ISL links are present between two switches that support trunking, then it is likely that trunk groups are present and all ports between the two switches should be tested at the same time. The execution of this command is subject to Virtual Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 767
See Also ERR_STAT_CRC ERR_STAT_ENCIN ERR_STAT_ENCOUT ERR_STAT_TRUNC FINISH_MSG_ERR INIT MBUF_STATE_ERR NO_SEGMENT PORT_ABSENT PORT_DIED PORT_ENABLE PORT_M2M PORT_STOPPED PORT_WRONG RXQ_RAM_PERR STATS STATS_C3FRX STATS_FRX STATS_FTX TIMEOUT XMIT itemList, portLoopbackTest spinFab 2 Fabric OS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 768
than password authentication and can be used to securely access services that require automatic login. SSH public key authentication works as /configUpload. This command supports generation of a public/private key pair on the switch to enable outgoing connections between a switch and a remote host - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 769
This operation can only be performed by the default admin. importpubkey Imports a public key from a remote host to the local switch. This operation supports authentication for incoming connections. For this operation to succeed, a public/private key pair must be generated on the remote host prior - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 770
and copied to the corresponding public key to other machines. exportpubkey Exports the public key from the switch to a specified remote host to support outgoing connections from the switch to a remote host. This option can only be performed by a configured user. The successfully exported public - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 771
key to the authorized_keys file on the remote host: username@remotehost> cat ~/.ssh/outgoing.pub >> ~/.ssh/authorized_keys To delete the private key on a switch: switch:username> sshutil delprivkey private key is deleted successfully. See Also none Fabric OS Command Reference 743 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 772
value] Description Use this command to clear the port and diagnostics statistics for the specified list of blade or user ports. You can issue this command on the FR4-18i blade in a Brocade chassis; however, the command is not supported by the Brocade platform and does not effect any other feature - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 773
commands" and Appendix A, "Command Availability" for details. Operands This command has the following operand: -ports itemlist Specify a list of user ports to test. By default, all the user ports in the switch are tested. Refer to itemList help pages for further details. Examples To stop the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 774
without operands, the command prints the usage. Examples To display the FFDC configuration: switch:admin> supportffdc --show First Failure Data Capture (FFDC) is disabled. To enable the FFDC events: switch:admin> supportffdc --enable First Failure Data Capture (FFDC) is enabled. See Also none - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 775
host. Provide an IP address or a server name. IPv4 and IPv6 addresses are supported. To specify the host by name, a DNS entry must exist for the the trace dump files are stored. The directory name must be less than 48 characters long. Specifying the root directory as the remote directory (/) is - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 776
-t 24 supportftp: ftp check period changed. To enable auto file transfer: switch:admin> supportftp -e support auto file transfer enabled. To disable auto file transfer: switch:admin> supportftp -d support auto file transfer disabled. supportSave, supportShow, traceDump 748 Fabric OS Command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 777
and iterates through the defined switch-based information for all logical switches. Chassis permissions are required to execute this command. System-wide supportSave is supported on platforms running Fabric OS v6.2.0 or later. The command collects support data from the Active CP (and its Co-CPU - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 778
transfer by the supportSave command. Failure to configure the service correctly may result in significant delays in obtaining transferred save RASLOG, TRACE, supportShow, and other support information to an FTP server in interactive mode: switch:admin> supportsave This command will collect RASLOG - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 779
run supportSave without confirmation on a Brocade DCX with AP blades included using supportFTP parameters (only Active CP output is shown): switch:admin> supportsave -n -c Saving support information for chassis:ras020_chassis, module:RAS Saving support information for chassis:ras020_chassis, module - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 780
Displays switch information for debugging purposes. supportshow [[slotnumber/]portnumber1-portnumber2] [lines] Use this command to display support information from groups of preselected Fabric OS and Linux commands and other support and debugging information. You can specify the range of ports for - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 781
Oct 20 16:04:18 2008 1.0.6 supportshow groups enabled: os enabled exception enabled port enabled fabric enabled services enabled security task event port cmd args Tue Oct 21 07:32:21 2008 07:32:21.887 FCPH read 0 40 02fffffd,00fffffd,f4000000,00000000,1a 731af5 07:32:21.887 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 782
30.131 FCPH seq 0 28 00300000,00000000,00000834,00020182,00 000000 07:32:30.131 PORT Tx 0 40 07:32:30.131 PORT Rx 0 0 07:32:41.887 PORT Rx 0 40 07:32:41.887 PORT Tx 0 0 07:32:41.887 FCPH read 0 40 02fffffd,00fffffd,f5000000,00000000,1a 751af7 02fffffd,00fffffd,1af6ffff,14000000 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 783
group commands. port Disables the port group commands. fabric Disables the fabric group commands. services Disables the service group commands. security the OS group of commands under the supportShow command: switch:admin> supportshowcfgdisable os Config update Succeeded See Also supportShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 784
group commands. port Enables the port group commands. fabric Enables the fabric group commands. services Enables the service group commands. a group of commands under the supportShow command: switch:admin> supportshowcfgenable os Config update Succeeded supportShow, supportShowCfgDisable - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 785
To display the command groups that are enabled in the supportShow command: switch:admin> supportshowcfgshow os enabled exception enabled port enabled fabric enabled services enabled security enabled network enabled portlog enabled system enabled extend disabled filter disabled - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 786
still executable and functional. The normal flashing LED pattern (associated with an active, faulty or disabled port for example) is suppressed and only the beaconing pattern is shown. However, if diagnostic frame-based tests (such as portLoopbackTest) are executed, two patterns are interleaved. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 787
. Synopsis switchcfgpersistentdisable Description Use this command to persistently disable the switch. All Fibre Channel ports are taken offline. If the switch was part of a fabric, the remaining switches reconfigure. The switch remains disabled even after a reboot. The disable process can be - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 788
persistently. Synopsis switchcfgpersistentenable Description Use this command to persistently enable a persistently disabled switch. All Fibre Channel ports that passed the power-on self-test (POST) are enabled and come online if connected to a device, or remain offline if disconnected. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 789
the specified speed setting, an error message is displayed for that port. The configuration is saved in nonvolatile memory and persists across switch reboots or power cycles. Use the portShow command to display actual port speed settings. Use the portCfgShow command to display user-configured speed - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 790
mode Specify 1 to enable trunking on all ports. Specify 0 to disable trunking on all ports. Examples To enable trunking on all ports of a switch: switch:admin> switchcfgtrunk 1 Configuration applied to all ports except the following \ VE/VEX_Ports (ports 176 - 191). See Also To disable trunking - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 791
to be disabled generate an error message if invoked while the switch is enabled. It is not necessary to disable the switch before rebooting or powering off. When this command is executed on a logical switch, only the ports allocated to the logical are disabled. To disable the entire chassis, use - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 792
2 switchEnable switchEnable Enables all user ports on a switch. Synopsis switchenable Description Use this command to enable all user ports on a switch. All Fibre Channel ports that passed the power-on self test (POST) are enabled. They can come online if connected to a device, or remain - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 793
name can include up to 30 characters on all platforms running Fabric OS v.6.2.0 or later. On the Brocade 300, 5100, 5300, and 5410 platforms running earlier firmware versions, the switch name can be up to 31 characters long. On all other pre-Fabric OS v6.2.0 platforms, the name is limited to 15 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 794
ID associated with the logical switch and the switch role (default switch or base switch). The switch summary is followed by one-line description for non-EX_Ports and one or two lines for EX_Ports: Area Part of the 24-bit port ID, which consists of domain, port area number, and optional AL_PA - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 795
No_Light No_Sync In_Sync Laser_Flt Port_Flt Diag_Flt Lock_Ref Testing Offline Online Shortwave laser Longwave laser copper serial ID The speed of the port: 125 Mbps 250 Mbps 500 Mbps 1 Gbps fixed transfer speed 1 Gbps negotiated transfer speed 2 Gbps fixed transfer speed 2 Gbps negotiated transfer - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 796
is capable of quality of service (QoS). (logical) Indicates a logical port. Switchshow shows all logical ports currently present in the logical switch. The command displays -1 for the slot for logical ports and the user port number for slot port. The logical port numbers are not persistent and - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 797
the port count: switch:admin> switchshow -portcount ports= 64 To display GbE ports with iSCSI sessions: switch:admin> switchshow -iscsi Ports of Slot 1 ge0 ge1 ge2 ge3 ge4 ge5 ge6 ge7 Sessions 0 0 0 0 0 0 0 0 To display switch information on a Brocade 48000 director that does not support - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 798
switchWwn: 10:00:00:60:69:80:04:92 zoning: ON (testcfg1) switchBeacon: OFF FC Router: OFF Allow XISL use: ON LS Attributes: [FID: 10, Base Switch: No, Default Switch: No] Index Slot Port Address Media Speed State Proto 770 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 799
-- N8 No_Module 381 12 45 32f580 -- N8 No_Module 382 12 46 32f680 -- N8 No_Module 383 12 47 32f780 -- N8 No_Module 769 -1 769 -- -- -- OnlineE-Port 10:00:00:05:1e:40:f0:79 "Switch 1" (logical) 770 -1 770 -- -- -- Offline(logical) 785 -1 785 -- -- -- Offline Disabled (logical, reason why - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 800
Blade 0 1 Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 Any single contributor can force the overall status of the switch to MARGINAL or DOWN. For example, assuming that the switch contributor values are set to the default values, if there is one faulty port in a switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 801
the prompt is (0..0), ** the policy parameter is NOT applicable to the switch. ** Simply hit the Return key. The minimum number of Bad PowerSupplies to MARGINAL status: (0..2) [1] Down Blade contributing to DOWN status: (0..8) [0] Down Blade contributing to MARGINAL status: (0..8) [1] - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 802
of policies such as Fans, PowerSupplies, CP, WWN, and Blade may differ from platform to platform. TABLE 22 Example of contributor change in the switch. For example, if the FaultyPorts DOWN parameter is set to 3, and three ports fail in the switch, then the status of the switch changes to DOWN. - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 803
Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 See Also switchStatusPolicySet, switchStatusShow switchStatusPolicyShow 2 Fabric OS Command Reference 775 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 804
displays the overall switch status, and the status of the following contributors: • Power supplies • Temperatures • Fans • WWN servers (dual-CP systems only) • Standby CP (dual-CP systems only with HA enabled) • Blades (bladed systems only) • Flash • Marginal ports • Faulty ports • Missing SFPs - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 805
All ports are healthy To retrieve a switch health report for a switch that is configured with an IPv4 address: switch:user> switchstatusshow Switch Health Report Switch Name: switch IP address: 10.32.89.26 SwitchState: MARGINAL Duration: 80:12 Report time: 09/11/2006 05:39:28 PM Power - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 806
has been operating. Synopsis switchuptime Description Use this command to display the current time and the amount of time that the switch has been operational. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 807
details. This command can be executed on both active and standby CPs. This command does not support High Availability (HA). Operands This command has DCC. Examples To display DCC violations for a switch: switch:admin> switchviolation --dump -dcc Device WWN Port 22:00:00:04:cf:75:59:87 10 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 808
This operand is optional; if omitted, the current facility is displayed. Examples To set the syslog facility to LOG_LOCAL1: switch:admin> syslogdfacility -l 1 Syslog facility changed to LOG_LOCAL1 See Also syslogdIpAdd, syslogdIpRemove, syslogdIpShow 780 Fabric OS Command Reference 53-1001186 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 809
or users, depending on the system configuration. Up to six servers are supported. You can specify a syslogd server in one of two ways: DNS entry and accept DNS requests. You must configure the DNS name service on the switch with dnsconfig before you can add the host name with the syslogdipadd - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 810
syslogdIpAdd 2. Add the DNS name server to the switch: switch:admin> dnsconfig Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration 3 Remove DNS configuration 4 Quit Select an item: (1..4) [4] 2 Enter Domain Name: [] brocade.com Enter Name Server IP address in dot - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 811
that is running the syslogd process and to which system messages are sent from the syslog server configuration on the switch. IPv6 and IPv4 syslogd addresses are supported. Use syslogdIPShow to view the current syslog server configuration. Note The execution of this command is subject to Virtual - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 812
daemon IP addresses in the configuration database. IPv4 and IPv6 addresses are supported. Note The execution of this command is subject to Virtual Fabric or To display all syslog daemon IP addresses configured on a switch: switch:admin> syslogdipshow syslog.1 1080::8:800:200C:417A See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 813
control processor (CP), the command shuts down the active CP, standby CP, and any AP blades. After executing this command, manually power off the system. To reboot the system, manually turn the power switch on. Notes This command is not supported on the standby CP. The execution of this command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 814
sysShutDown To attempt a system shutdown from the standby CP (not supported): switch:admin> sysshutdown Shut down the whole system is not support from the standby CP For shut down the whole system please run the sysshutdown from the active CP See Also haDisable 786 Fabric OS Command Reference 53 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 815
blade are saved in /var/log/verify.slot files. On fixed-port-count products, the slot defaults to 0. The command monitors the testing and terminates the burn-in activity parameters are copied to all switches in the system and override the use for this command is software regression testing, or quick - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 816
the system. Valid values are BLADE, PS, FAN, and WWN; however, only BLADE is supported at this time. Since only one FRU type is supported, this parameter is optional, but on switch 0. systemverification: Starting burnin on Switch 0 systemverification: Monitoring progress of the burnin activity. - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 817
restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. Refer to the hardware reference manual for your switch to determine the normal temperature range. Operands none Examples To display temperature and status sensors - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 818
login timeouts. This operand is optional; if omitted, the command displays the current timeout value. Examples To set the idle timeout to 10 minutes: switch:admin> timeout 10 IDLE Timeout Changed to 10 minutes The modified IDLE Timeout will be in effect after NEXT login See Also none 790 Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 819
of reaching destination domain. Name The name of the destination switch. Path Count The number of currently active paths to the destination domain. Hops The maximum number of hops to reach destination domain. Out Port The port to which incoming frames are forwarded to reach the destination - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 820
Total Bandwidth The maximum bandwidth of the out port. A bandwidth that is less than 0.512 Gbps is adjusted to the nearest power of 2 value. A bandwidth in the range To display the topology on a single switch: domain is local, details are not displayed. switch:user> topologyshow 1 domains in the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 821
for the three remote domains, not for the two local translate domains. switch:user> topologyshow 5 domains in the fabric; Local Domain ID: 2 Local Translate Domain 4 owned by port: 24 Local Translate Domain 5 owned by port: 23 33 Domain: Metric: Name: Path Count: 1 500 pengsaturn104 1 Hops: Out - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 822
2 topologyShow See Also Path Count: 1 Hops: Out Port: In Ports: Total Bandwidth: Bandwidth Demand: Flags: 2 0 23 24 33 38 39 8.000 Gbps 350 % D fcrXlateConfig, portRouteShow, uRouteShow 794 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 823
this command to initiate a background trace dump, to remove the content of a trace dump, or to display the dump status on the switch. When executed without operands, this command defaults to traceDump -S. Execution of traceDump -n generates a local trace dump locally. Use supportSave to transfer - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 824
2 traceDump See Also To remove a trace dump: switch:admin> tracedump -r trace dump removed supportFtp, supportSave, supportShow 796 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 825
1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Examples To display information on the track-changes commands: switch:admin> trackchangeshelp trackChangesSet Configure alert for login/logout/config update trackChangesShow Displays status of track changes See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 826
file change from task • Track-changes on • Track-changes off The output from the track-changes feature is dumped to the error log for the switch. Use errDump or errShow to view the error log. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 827
output from the track-changes feature is dumped to the error log for the switch. Use the errDump command or errShow command to view the error log. Note Examples To display the status of the track-changes feature: switch:admin> trackchangesshow Track changes status: ON Track changes generate SNMP - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 828
one of the following messages, based on the trunking properties of the two specified ports: • Switch does not support trunking • Trunking license required • Trunking not supported in switch interop mode • port port_id is not E_Port • port port_id trunking disabled • port port_id speed is not 2G - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 829
on the port types of the local switch and WWNs of the remote switches. See firmware automatically sets the minimum deskew value of the shortest ISL to 15. Master Displays whether this trunking port connection is the master port 51:43:04 deskew 16 deskew 15 deskew 17 deskew 16 MASTER 3:24 -> - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 830
:1e:37:12:13 64-> 16 10:00:00:05:1e:37:12:13 65-> 19 10:00:00:05:1e:37:12:13 4 deskew 17 MASTER 4 deskew 16 4 deskew 16 4 deskew 16 4 deskew 17 4 deskew 17 4 deskew 15 4 deskew 16 switch:admin> switchshow 48 4 0 013000 id N4 Online EX-Port (Trunk port, master is Slot 4 Port 1 ) 49 4 1 013100 id N4 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 831
specified) and broadcasts time service updates. All switches in the fabric maintain switch are propagated to all switches in the fabric. Use this command without parameters to display the active and should be accessible from the switch. The NTP server must support a full NTP client. When a clock - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 832
LOCL To set the NTP server to a specified IP address: switch:admin> tsclockserver 123.123.123.123 Updating Clock Server configuration...done. switch:admin> tsclockserver 123.123.123.123 To configure multiple NTP servers: switch:admin> tsclockserver "12.134.125.24; 12.234.87.01" Updating - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 833
zone is used in computing local time for error reporting and logging. An incorrect time zone setup does not affect the switch operation in any way. System services started during the switch boot reflect a time zone change only at the next reboot. The time zone can be specified in two ways, by name - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 834
the current timezone to the zone to Pacific Time using the interactive command mode: switch:admin> tsTimeZone --interactive Please identify a location so that time zone rules can be ) Venezuela 14) Costa Rica 31) Montserrat 48) Virgin Islands (UK) 806 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 835
tsTimeZone 2 15) Cuba 32) Netherlands Antilles 16) Dominica 33) Nicaragua 17) Dominican Republic 34) Panama reboot To revert back to the offset format and verify the configuration: switch admin> tstimezone --old 2 switch admin> tsttimezone Time Zone Hour Offset: 2 Time Zone Minute Offset: - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 836
the PCI operation. This test is supported on all 4 G and 8 G operates. All blade ports in the specified port count products. -passcnt count Specifies the number of times to perform this test. This operand is optional. The default value is 1. Examples To run the SRAM test with two passes: switch - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 837
OS Commands" and Appendix A, "Command Availability" for details. Operands none Examples To display the length of time the system has been operational: switch:admin> uptime 12:03am up 4:56, 3 users, load average: 1.17, 1.08, 1.08 See Also date, fastboot, reboot Fabric OS Command Reference 809 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 838
are not enforced. Notes Static route configuration is not supported on the Brocade 300, 4900, 5100, 5300, 7500, 7600, and DCX platforms. On the Brocade 48000, Static route configuration is not supported on Brocade directors set to chassis configuration option 5 by chassisConfig. The execution - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 839
the destination domain of the static route to remove. Examples To remove a static route for all traffic coming in from port 1 and addressed to domain 2: switch:admin> urouteremove 1 2 done. See Also configShow, dlsShow, uRouteConfig, uRouteShow Fabric OS Command Reference 811 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 840
the number of the input port whose routes are to be displayed, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand is optional; if omitted, the command displays routing information for all input ports in the switch. 812 Fabric OS Command Reference - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 841
information of all the active ports: switch:admin> urouteshow Local Domain ID: 3 In Port Domain Out Port Metric Hops Flags Next (Dom, Port) 0 1 11 1000 1 D 1,0 11 2 0 1500 2 D 4,0 4 0 500 1 D 4,0 16 1 27 1000 1 D 1,1 27 2 16 1500 2 D 4,16 To display the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 842
details. This command is available only on the Active CP. Operands All operands are exclusive. Only one storage space. Valid applications are: firmware, support, config, or firmwarekey. A the attached USB device: switch:admin> usbstorage -l firmwarekey\ 0B support\ 106MB support1034\ 105MB - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 843
15 15:13 Available space on usbstorage 74% To remove an application area: switch:admin> usbstorage -r firmware FW_v6.0.0 To disable an attached USB device: switch:admin> usbstorage -d USB storage disabled supportSave, firmwareDownload, configUpload, configDownload, firmwareKeyupdate Fabric OS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 844
persistently. On platforms supporting multiple switch domains, account information is saved only to the switch domain, in which the command was executed. Use the distribute command to distribute the account database manually to other switches in the fabric. Target switches must be configured to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 845
as monitoring system activity. Operator A subset of administrative tasks for routine switch maintenance. SwitchAdmin Administrative not. The account database supports a maximum of 256 customer created accounts. The backup account database is no longer supported on switches running Fabric OS v6 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 846
, you can change the role associated with existing LFs but you cannot add new LFs or delete any existing LFs. The following operands are supported with the --add and --change options: username Specifies the login name of the account to be created or modified. Enter a valid login name to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 847
help page for more information. --addad | --deletead Adds one or more ADs to a user account or deletes ADs from a user account. The following operands are supported: username Specifies the account login name. Fabric OS Command Reference 819 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 848
Adds Logical Fabric or chassis permissions to a user account or deletes LF or chassis permission from a user account. The following operands are supported: username Specifies the account login name. -h LF_ID Specifies the account's home LF. This operand is optional. • If a home LF is specified - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 849
Expiration Date: Not Applicable Locked: No AD membership: 0 Home AD: 0 To disable the account "joe": switch:admin> userconfig --change joe -e no Broadcast message from root Sat Apr 2 03:03:32 2005... Security Policy, Password or Account Attribute Change: joe will be logged out Attribute for account - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 850
in an LF-enabled environment. To create a new account named "test" with admin role and admin chassis permissions in the LF member list 1-10: switch:admin> userconfig --add test -l 1-10 -r admin -c admin Setting initial password for test Enter new password: Re-type new password: Account test has been - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 851
userConfig 2 To remove chassis permissions from the test account for the LFs 1-3. switch:admin> userconfig --deletelf test -l 1-3 -c Broadcast message from root (ttyS0) Sat Jun 14 01:10:02 2008... Security Policy, Password or Account Attribute Change: test will - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 852
name, it must indicate the same role as old_username. Notes This command is not supported on all platforms. The execution of this command is subject to Virtual Fabric or Admin login name from "USERID" to "admin": switch:admin> userrename USERID admin See Also none 824 Fabric OS Command Reference - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 853
on The build date of firmware running in switch. Flash The build date of firmware stored in flash proms. BootProm The version of the firmware stored in the boot PROM Usually the Made on and Flash dates are the same, because the switch starts running flash firmware at power-on. However, in the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 854
switch. Synopsis wwn [-sn ] Description Use this command to display the WWN associated with a switch and to display the switch serial number. The switch WWN is a 64 c1 10.32.228.66 0.0.0.0 "Spir6" 200:fffcc8 10:00:00:05:1e:39:d8:5a 10.32.228.200 0.0.0.0 "DCX2" The Fabric has 2 switches See Also - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 855
zone --rddelete name The zone command supports three types of operations: specific , --add,--remove, --delete, --activate, --deactivate, and --show options flowing from a specific set of source ports. The provision (a.k.a TI Zone) is based on EX_Ports and devices involved. Fabric OS Command - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 856
to map real device world wide names (WWNs) to virtual port IDs (PIDs.) This allows redirecting a flow between a host base RD zone, "red_______base". Use cfgDelete to remove the RD zone configuration "r_e_d_i_r_c__fg." Notes TI zones are not supported in fabrics involving switches running firmware - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 857
together with the -f option. Specifies the zone database location. Supported mode flag values are: 0 Uses the zone database from the port list members and the failover option to existing TI zones. --remove Removes port list members from existing zones. Removal of the last member from an active - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 858
the switch generates another SCN or RSCN. TI zones with no-failover option are not supported in logical fabrics. TI zones defined in the Base Fabric fabric specify "Port WWN" in portlist to indicate devices talking across fabrics. --activate name --deactivate name Activates or deactivates the - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 859
wish to support FCR. Deletes the RD Zone specified by name. RD Zones are unique in that the zone name is not user-defined. It is derived based on members the currently enforced zone database: switch:admin>zonecreate z10,a10 switch:admin>zonecreate a10, 1,2 switch:admin> zone --validate Defined - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 860
the member? (yes, y, no, n): [no] yes To validate all zones in the zone database in the current transaction buffer: switch:admin> zone --validate -m 0 Defined configuration: cfg: t_r_a_f_f_i_c_i_s_o_c__fg bluezone; greenzone cfg: ticonfig regzone zone: bluezone 1,1*; 1,2* zone: greenzone 1,1*; 20:01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 861
about to prune the zone configurations, based on zone --validate output. Do you want to prune the zone configurations (yes, y, no, n): [no] y 2. Traffic isolation zone commands: To create an activated traffic isolation zone with failover enabled (default). switch:admin>zone --create -t ti purplezone - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 862
configuration: switch:admin>zone --show tibluezone Defined TI zone configuration: TI Zone Name: ti_bluezone Port List: 2,2; 3,2 Configured Status: Activated / Failover ", with a restrictedly policy and no FCR support. • The base zone object, "red_______base". • The RD zone - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 863
zone: myHostTarget 00:3f:3f:3f:23:24:25:26 3f:3f:3f:30:32:00:00:00 To delete an RD Zone named "red_0917_10_10_10_10_10_10_10_10_20_20_20_20_20_20_20_20": switch:admin>zone --rddelete red_0917_10_10_10_10_10_10_10_10_20_20_20_20_20_20_20_20 See Also ad, zoneHelp Fabric OS Command Reference 835 53 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 864
. Members can be specified in one or more of the following ways: • A switch domain and port area or index number pair; for example, "2, 20". Use switchShow for a listing f valid port area or index numbers. • Node or port WWN. • Zone alias name. Examples To add aliases for three disk arrays to - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 865
zones. Zone names are limited to 64 characters. Spaces are ignored. " port area or port index pair: Specify a port by domain and port area or port index, for example, "2, 20" specifies port index 20 on switch domain 2. When a zone member is specified by port index, all devices connected to that port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 866
zone members. For example, a zone defined with the following members: "2,12; 2,14; 10:00:00:60:69:00:00:8a" contains all devices connected to switch 2, ports 12 and 14, and to the device with the World Wide Name "10:00:00:60:69:00:00:8a" (either node name or - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 867
, enable the configuration with the cfgEnable command. Notes When an FCS policy is enabled, this command can be issued only from the primary FCS switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 868
none Examples To display zone command help information: switch:admin> zonehelp aliadd alicreate alidelete aliremove alishow cfgactvshow information Print size details of zone database Abort zone configuration transaction Print zone configurations in transaction buffer Activates or deactivates - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 869
effective, enable the configuration with the cfgEnable command. Notes When FCS policy is enabled, this command can be issued only from the primary FCS switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 870
:20:37:0c:76:28 alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df switch:admin> zoneobjectexpunge "White_zone" switch:admin> cfgshow Defined configuration: cfg: USA_cfg Red_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Red_zone 1,0; loop1 alias: array1 21:00:00:20:37:0c - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 871
changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command is enabled, this command can be issued only from the primary FCS switch. The execution of this command is subject to Virtual Fabric or Admin - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 872
marks. Members must be separated by semicolons. A member can be one or more of the following: • A switch domain and port area or index pair: for example, "2,20". Use switchShow for a list of valid port area or index numbers. • A World Wide Name • A zone alias name Examples To remove "array2" from - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 873
Fabric OS Commands" and Appendix A, "Command Availability" for details. When FCS policy is enabled, this command can be issued on any FCS switch in the fabric. Operands This command has the following operands: "pattern" A POSIX-style regular expression used to match zone configuration names. The - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 874
2 zoneShow 846 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 875
msPlMgmtDeactivate Must be run from the primary FCS switch. Must be run from the primary FCS switch. Must be run from the primary FCS switch. Must be run from the primary FCS switch. Can be run on all FCS switches. Must be run from the primary FCS switch. Must be run from the primary FCS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 876
. Must be run from the primary FCS switch. Must be run from the primary FCS switch. Must be run from the primary FCS switch. Must be run from the primary FCS switch. Must be run from the primary FCS switch. Must be run from the primary FCS switch. 848 Fabric OS Command Reference 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 877
checks. 1. Active or Standby CP). 2. Role Based Access Control ( The following RBAC permissions are supported: • O = observe to the Fabric OS Administrator's Guide. Admin Domain Types are one port or the local switch is part of the current AD. View access allowed if the device attached to the port - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 878
RBAC roles may perform routine encryption switch management functions including the following: • Configure virtual devices & crypto LUN. • Configure LUN/tape associations. • Perform re-keying operations. • Perform firmware download. • Perform regular Fabric OS management functions - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 879
initEE N OM N N N O N OM Disallowed initnode N OM N N N O N OM Disallowed leave_encryption_group N OM N N N O N OM Disallowed Fabric OS Command Reference 53-1001186-01 Context Switch Type VF DS VF DS VF DS VF DS VF DS VF DS VF DS VF DS VF DS VF DS VF DS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 880
domain type Command Name User Admin Oper Sw Zone Fabric BS Sec Admin Domain Admin Admin Admin Admin Admin Context Switch Type aaaConfig ad ag agShow aliAdd aliCreate aliDelete aliRemove N OM N N N N N OM SwitchMember CH N/A N OM N N N N N O Allowed/ Disallowed N/A OM OM OM OM - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 881
O OM O O OM OM O O Allowed VF cfgTransShow O OM O O OM OM O O Allowed VF chassisBeacon O OM OM OM O OM 0 0 SwitchMember CH Switch Type All N/A N/A N/A All N/A N/A All All N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A All All All All All All N/A All All All All All All All - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 882
User Admin Oper Sw Zone Fabric BS Sec Admin Domain Admin Admin Admin Admin Admin Context Switch Type chassisConfig chassisDisable chassisEnablle chassisName chassisShow cliHistory configDefault configDownload configList configRemove configShow configUpload configure configureChassis dataTypeShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 883
Allowed O OM O O O OM O O SwitchMember O OM OM OM N OM O N SwitchMember O OM O O O OM O N SwitchMember O OM O O O OM O N Allowed Context CH CH CH Switch Type N/A N/A N/A VF N/A CH N/A VF N/A VF N/A VF All VF All VF All VF All VF All VF All VF All CH - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 884
type Command Name User Admin Oper Sw Zone Fabric BS Sec Admin Domain Admin Admin Admin Admin Admin Context Switch Type fcrlsan O OM O O O OM O N SwitchMember VF BS fcrlsanCount O OM O O O OM O N SwitchMember VF BS fcrlsanMatrix O OM O O O OM O N SwitchMember VF BS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 885
O OM O N Allowed O OM OM OM O OM O OM Allowed/ SwitchMember O OM O O N OM O N SwitchMember O OM O O N OM O N SwitchMember O OM O O N OM O N SwitchMember Context Switch Type VF All VF All VF All VF All Disallowed N/A VF All VF All VF All VF All VF All - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 886
Allowed O OM OM OM O OM O N Allowed O OM OM OM O OM O N SwitchMember O OM OM OM O OM O N Allowed O OM OM OM O OM O N Allowed Context Switch Type VF All VF All CH N/A CH N/A CH N/A CH N/A VF All CH N/A Disallowed N/A CH N/A VF All VF All VF All VF All - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 887
O N SwitchMember O O O O O O O O Allowed O OM O OM N OM O N SwitchMember Context VF VF VF VF VF VF CH VF VF CH VF VF VF VF VF VF VF VF Switch Type All All All All All All N/A All All N/A All All All All All All N/A N/A CH N/A VF All CH N/A VF All VF All VF All - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 888
VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF VF Switch Type All All All All All N/A N/A N/A N/A All All All All All All All All All All All All All All All All All All All - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 889
VF VF VF VF VF VF VF VF VF VF VF VF VF VF CH VF VF VF VF VF VF VF VF VF VF Switch Type All All N/A All All All All N/A All All All All All All All All All All All All All All All All N/A All All - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 890
Name User Admin Oper Sw Zone Fabric BS Sec Admin Domain Admin Admin Admin Admin Admin Context Switch Type portSwapShow portTest portTestShow portTrunkArea portZoneShow powerOffListSet powerOffListShow psShow reboot routeHelp secActiveSize secAuthSecret secCertUtil secDefineSize secGlobalShow - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 891
OM O N SwitchMember VF OM O N Allowed VF OM O N Allowed VF OM O O Allowed CH OM O OM Allowed VF OM O OM SwitchMember CH Switch Type N/A N/A N/A N/A N/A N/A N/A DS N/A All DS N/A N/A N/A All N/A N/A N/A All All All All All All All All All All All All N/A All N/A Fabric OS - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 892
OM OM O O Allowed OM O O OM OM O O Allowed O O O O O O O Allowed OM O O OM OM O O Allowed Context CH CH CH CH CH CH CH Switch Type N/A N/A N/A N/A N/A N/A N/A VF All CH N/A Disallowed N/A VF All VF All VF All VF All CH N/A CH N/A CH N/A CH N/A VF All VF - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 893
zoneObjectExpunge zoneObjectRename zoneRemove zoneShow O OM O O OM OM O O Allowed O OM O O OM OM O O Allowed O OM O O OM OM O O Allowed O OM O O OM OM O O Allowed Context VF VF VF VF Switch Type All All All All Fabric OS Command Reference 865 53-1001186-01 - HP AE370A | Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, Ap - Page 894
A General Fabric OS commands and permissions 866 Fabric OS Command Reference 53-1001186-01
53-1001186-01
24 November 2008
Fabric OS
Command Reference Manual
Supporting Fabric OS v6.2.0