HP BL480c HP BladeSystem Onboard Administrator Command Line Interface User Gui
HP BL480c - ProLiant - 4 GB RAM Manual
UPC - 882780759664
View all HP BL480c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP BL480c manual content summary:
- HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 1
HP BladeSystem Onboard Administrator Command Line Interface User Guide Version 3.00 Part Number 416217-404 February 2010 (Thirteenth Edition) - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 2
's standard commercial license. Intended audience This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 3
10 Local access to the Onboard Administrator 10 Command line...12 Command line overview ...12 Command line conventions ...12 HP Integrity server blade restrictions ...13 Access level and privileges...13 Account authentication...15 AutoLogin to iLO 2 ...16 General commands...17 CLEAR SCREEN - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 4
LDAP PORT...36 SET LDAP SEARCH ...36 SET LDAP SERVER ...36 SHOW LDAP CERTIFICATE ...36 SHOW LDAP GROUP... LDAP ...38 UNASSIGN OA LDAP GROUP ...38 HP SIM commands...40 ADD HPSIM CERTIFICATE ...40 DOWNLOAD BLADE...45 SET FACTORY ...45 SET SCRIPT MODE ...45 SHOW ALL...46 SHOW DEVICE SERIAL_NUMBER BLADE - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 5
DISABLE EBIPA...74 ENABLE EBIPA ...74 REMOVE EBIPA ...75 SET EBIPA ...75 SET EBIPA SERVER ...76 SET EBIPA INTERCONNECT ...76 SHOW EBIPA ...76 Enclosure network configuration commands 79 ADD OA ADDRESS IPV6 ...79 ADD OA DNS ...79 ADD OA DNS IPV6...79 ADD SNMP TRAPRECEIVER...80 ADD SSHKEY ...80 ADD - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 6
SET ENCLOSURE ASSET ...103 SET ENCLOSURE NAME ...104 SET ENCLOSURE PART_ NUMBER ...104 SET ENCLOSURE PDU_TYPE ...104 SET ENCLOSURE SERIAL_NUMBER ...105 SET SHOW ENCLOSURE POWER_SUMMARY 111 SHOW ENCLOSURE POWERSUPPLY ...112 SHOW ENCLOSURE STATUS ...113 SHOW ENCLOSURE TEMP ...113 SHOW FRU ...114 SHOW - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 7
120 SHOW VCMODE ...121 UPDATE ...122 UPDATE ILO ...122 UPDATE IMAGE...123 UPLOAD CONFIG ...123 UPLOAD DEBUG...124 Blade management commands 125 CONNECT SERVER...125 DISABLE URB ...125 ENABLE URB ...125 HPONCFG ...126 POWEROFF SERVER ...126 POWERON SERVER ...127 REBOOT SERVER ...127 SET NIC ...128 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 8
Remote syslog example...152 USB support commands...153 DOWNLOAD CONFIG using USB key ...153 SET SERVER DVD for USB key ...153 SHOW USBKEY...153 UPDATE IMAGE using USB key ...154 line event notifications...165 Technical support...168 Before you contact HP ...168 HP contact information...168 Time zone - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 9
Asia time zone settings ...171 Oceanic time zone settings ...172 Europe time zone settings...173 Polar time zone settings ...173 Acronyms and abbreviations...174 Index...177 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 10
Accessing the command line interface Remote access to the Onboard Administrator The Onboard Administrator CLI can be accessed remotely through any Telnet or SSH session. Telnet session 1. Open a command-line window from a network-connected client. 2. At the prompt, telnet to the IP address of the - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 11
Pin Name 3 TXD 4 DTR 5 GND 6 DSR 7 RTS 8 CTS 9 RI Signal direction -->> -->> Description Transmit data Data terminal ready System ground Data set ready Request to send Clear to send Ring indicator 2. Use any standard communication software to launch a terminal emulation session - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 12
be useful in the following scenarios: • HP Management Applications (for example: Systems Insight Manager data collection and for executing provisioning and configuration tasks. • When no browser is number of subcommands. Subcommands can also have further subcommands. Each command used in this guide - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 13
HP Integrity server blades do not support all commands. See specific commands for restrictions on HP Integrity server blades. The following commands are not applicable to HP Integrity server blades • Hponcfg • Set Server Boot • Set Server Boot Once • Show Server Boot • Show Syslog Server • Update - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 14
with the Administrator account. • All commands • Allows access to all aspects of the HP BladeSystem Enclosure and Onboard Administrator including configuration, firmware updates, user management, and resetting default settings. Account name / Privilege level Administrator / administrator username - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 15
all operations to permitted device bays and interconnect bays including virtual power and console access • operator permission on device iLO2 • Can view status and information of selected bays • Can view CLI history • Can set password for own account • Can set user contact information for own - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 16
optional setting. LDAP enabled can be used with local users enabled or disabled. • The Onboard Administrator will use configured LDAP server and search context to request account authentication. • Configuration of the LDAP group will determine the privileges instead of the username. • If a user is - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 17
| DISCOVER | DOWNLOAD | EDIT | ENABLE | EXIT | FORCE | GENERATE | HELP | HISTORY | HPONCFG | LOGOUT | PING | POWEROFF | POWERON | QUIT | REBOOT | REMOVE | RESET | RESTART | SAVE | SET | SHOW | SLEEP | TEST | UNASSIGN | UPDATE | UPLOAD LOGOUT • Command: General commands 17 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 18
LOGOUT • Description: Exits the command line interpreter • Access level: Administrator, Operator, User QUIT • • • Command: QUIT Description: Exits the command line interpreter Access level: Administrator, Operator, User General commands 18 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 19
Rack commands SET RACK NAME • Command: SET RACK NAME • Description: Sets the rack name • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be a maximum of 32 characters long and includes all alphanumeric, the dash, and the underscore characters. - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 20
Restrictions: None Example SHOW TOPOLOGY Detecting linked enclosures .... Rack Topology (top-down) Rack UUID: 090987654321 Rack Name: UnnamedRack Enclosure Name Status Local IP Address UUID Shorty OK Yes 16.84.190.253 090987654321 OA-0018FE2F998B OK No 172.16.211.101 09USE644285C - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 21
switch3, switch4, switch5, switch6, switch7, switch8, ldapuser, nobody, vcmuser, and root (for firmware 1.00 through 1.30). ASSIGN • Command: ASSIGN {SERVER | INTERCONNECT} { | ALL | -} {"" | LDAP GROUP ""} • Description: Assigns one or - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 22
ASSIGN OA • Command: ASSIGN OA {"" | LDAP GROUP ""} • Description: Assigns the Onboard Administrators specified to an existing user or group • Access level/Bay level: OA administrator • Restrictions: The is case sensitive. DISABLE USER • Command: DISABLE USER - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 23
ENABLE STRONG PASSWORDS • Description: When enabled, this command requires that a user's password contain at least one character from three of the four categories. The four categories include: o Uppercase o Lowercase o Numeric o Nonalphanumeric • Access level/Bay level: OA administrator • - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 24
1.00 through 1.30 and 3 to 40 characters long for firmware 2.00 and later. The character set includes all printable characters. SET SESSION TIMEOUT • Command: SET SESSION TIMEOUT • Description: Sets the number of minutes before inactive sessions are removed. The default setting is 1440 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 25
} • Description: Sets the user access level. Additionally, use the ASSIGN command to give the user access rights to the Onboard Administrator, server bays, and interconnect bays. • Access level/Bay level: OA administrator • Restrictions: None SET USER CONTACT • Command: SET USER CONTACT [" - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 26
. o The is case sensitive. o The must be three to eight characters long for firmware 1.00 through 1.30 and 3 to 40 characters long for firmware 2.00 and higher. o The character set includes all printable characters. SHOW PASSWORD SETTINGS • Command: SHOW PASSWORD SETTINGS - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 27
Administrator user session timeout. The session timeout is the number of minutes before inactive sessions are removed. • Access "Administrator" Information: Full name: System Administrator Contact Info: User Rights: Admin Account Status: Enabled Server Bay Access List: 1 1A 1B 2 2A 2B 3 3A 3B 4 4A - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 28
. • Access level/Bay level: All • Restrictions: The field must be a whole number from 1 to 86400. UNASSIGN • Command: UNASSIGN {SERVER | INTERCONNECT} { | ALL | -} {"" | LDAP GROUP ""} • Description: Removes a bay from the - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 29
Two-Factor Authentication commands DISABLE CRL • Command: DISABLE CRL • Description: Disables certificate revocation checks • Access level/Bay level: OA administrator • Restrictions: None DISABLE TWOFACTOR • Command: DISABLE TWOFACTOR • Description: Disables Two-Factor Authentication • Access level/ - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 30
CERTIFICATE "" • Description: • Removes the trust certificate corresponding to the SHA1 . Any users having their certificates issued by this CA can no longer login if Two-Factor Authentication is enabled. • Access level/Bay level: OA administrator • Restrictions - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 31
Class 2 Certification Authority subjectOrganization = hp.com subjectOrganizationalUnit = IT Infrastructure :CF SHOW TWOFACTOR INFO • Command: SHOW TWOFACTOR INFO • Description: Displays the configuration details for Two-Factor Authentication • Access level/Bay level: All • Restrictions: None - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 32
appear within the certificate (the end marker) 2. Paste in the certificate 3. Terminate the command with the end marker • Access level/Bay group must match a group in the directory server. • Access level/Bay level: OA administrator • Restrictions: o The maximum number of LDAP groups is 30. o Group - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 33
Access level/Bay level: OA administrator • Restrictions: None DISABLE LDAP NOTE: If LDAP is enabled, local accounts are disabled, and the LDAP server becomes unavailable, you can recover by booting into Lost Password mode. When booting in Lost Password mode, the local Administrator password will be - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 34
NOTE: If LDAP is enabled, local accounts are disabled, and the LDAP server becomes unavailable, you can recover by booting into Lost Password mode. When level: OA administrator • Restrictions: Before you can enable LDAP, configuration must be complete. REMOVE LDAP CERTIFICATE • Command: REMOVE LDAP - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 35
OA administrator • Restrictions: Before you can enable the LDAP group, configuration must be complete. SET LDAP GROUP ACCESS • Command SET LDAP GROUP ACCESS "" {ADMINISTRATOR | OPERATOR | USER} • Description: o Sets the LDAP group access level. o Additionally, - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 36
number> • Description: Sets the TCP port number of the LDAP SSL service. Port 636 is the standard value. • Access level/Bay level: OA administrator • Restrictions: The valid port number ip address> or the of the directory server • Access level/Bay level: OA administrator • Restrictions: - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 37
/7Hzk0kiyZ+7KJq92Q61Pipkea END CERTIFICATE----- SHOW Description Operator [email protected] Widget operators SHOW LDAP INFO • Command: SHOW LDAP INFO • Description: Displays the LDAP settings, including enabled or disabled status, LDAP server, LDAP port, search contexts - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 38
Directory Services (LDAP) Enabled : Disabled Local Users Enabled : Enabled NT Name Mapping : Disabled Directory Server : Directory Server SSL UNASSIGN for LDAP • Command: UNASSIGN {SERVER | INTERCONNECT} { | ALL | -} {"" | LDAP GROUP " - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 39
• Description: Disables access to the Onboard Administrator for the group specified • Access level/Bay level: OA administrator • Restrictions: None Directory commands 39 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 40
commands ADD HPSIM CERTIFICATE • Command: ADD HPSIM CERTIFICATE • Description: Adds an HP SIM certificate on the command line. 1. Start with a string that does not appear within the certificate (the end marker). 2. Paste in the certificate. 3. Terminate the - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 41
that the Onboard Administrator is configured to trust using a trust certificate. • Access level/Bay level: OA administrator, OA operator • Restrictions: None Example OA-0018FE27577F> SHOW HPSIM INFO HPSIM Trust Mode: Disabled Trusted Server Certificates No certificates were found. HP SIM commands 41 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 42
number> | ACTIVE | STANDBY] • Description: Downloads a CA supplied pkcs#7 file to replace the current security certificate on the system. Supported format the URL as protocol://host/path/file. If your FTP server does not support anonymous connections, then you can specify a user name and - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 43
The company or organization that owns this Onboard Administrator. When this information is used to generate a certificate signing request, the issuing certificate authority can verify that the organization requesting the certificate is legally entitled to claim ownership of the given company name or - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 44
the Onboard Administrator. (Optional) Must be 0 to 60 characters long PING • Command: PING [IPv6] [] {ip address> | ""} • Description: Sends ICMP echo messages to a remote IP[v6] device. If is omitted or between 9999 and 99999, then only four packets are sent. Packets - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 45
"" • Description: Sets the serial number of the specified Storage, Tape, or I/O expansion blade. • Access level/Bay level: OA administrator • Restrictions: o Length must be 10 characters. All printable characters are allowed. o This operation cannot be performed on server blades. SET - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 46
only displays the bays for which you have privileges. o To save the output, you must configure your Telnet software to log the session to a file or increase the history buffer size 3 0 SET INTERCONNECT POWERDELAY 4 0 SET SERVER POWERDELAY 1 0 SET SERVER POWERDELAY 2 0 General management commands 46 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 47
1B 0 SET SERVER POWERDELAY 2B 0 SET SERVER POWERDELAY 3B 0 SET SERVER POWERDELAY 4B 0 SET SERVER POWERDELAY 5B 0 SET SERVER POWERDELAY 6B 0 SET SERVER POWERDELAY 7B 0 SET SERVER POWERDELAY 8B 0 # Set ENCRYPTION security mode to STRONG or NORMAL. SET ENCRYPTION NORMAL #Configure Protocols ENABLE WEB - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 48
SET EBIPA SERVER NONE 5 SET EBIPA SERVER NONE 6 SET EBIPA SERVER NONE 7 SET EBIPA SERVER NONE 8 SET EBIPA SERVER NONE 1A SET EBIPA SERVER NONE 2A SET EBIPA SERVER NONE 3A SET EBIPA SERVER NONE 4A SET EBIPA SERVER NONE 5A SET EBIPA SERVER NONE 6A SET EBIPA SERVER NONE 7A SET EBIPA SERVER NONE 8A SET - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 49
- Device Bay iLO Processors Domain: Subnet Mask: 0.0.0.0 DNS Server1: 0.0.0.0 Server3: 0.0.0.0 Gateway: 0.0.0.0 Server2: 0.0.0.0 Bay Enabled EBIPA Address Current Address Device Type 1 No 16.84.190.209 Server Blade 1A No N/A [Absent] 1B No N/A [Absent] General management commands 49 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 50
N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A Server Blade [Absent] [Absent] [Absent] [Absent] [Absent] Server Blade [Absent] [Absent] [Subsumed] [Absent] [Absent] [Subsumed] Product Name: Active Cool 200 Fan Part Number: 412140-B21 Spare Part Number: 413996-001 Version: 2.7 Diagnostic Status - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 51
percent of Maximum speed Maximum speed: 18000 Minimum speed: 10 Power consumed: 28 Product Name: Active Cool 200 Fan Part Number: 412140-B21 Spare Part Number: 413996-001 Version: 2.7 Diagnostic Status: Internal Data OK Location OK Device Failure OK Device Degraded OK Missing Device - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 52
c3000 Enclosure Part Number: 437506-B21 Serial Number: 0987654321 UUID: 090987654321 Asset Tag: Midplane Spare Part Number: 441829-001 Serial Number: 531300ALL00233 Product Name: HP PROLIANT SERVER PS Part Number: 438203-001 Spare Part Number: XXXXXX-001 Product Ver: Diagnostic Status: - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 53
: OK Capacity: 1200 Watts Current Power Output: 8 Watts Serial Number: 531300ALL00399 Product Name: HP PROLIANT SERVER PS Part Number: 438203-001 Spare Part Number: XXXXXX-001 Product Ver: Diagnostic Status: Internal Data OK Device Failure OK Power Cord OK Power Supply #4 Information - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 54
Switch 2 Cisco Catalyst Blade Switch 312 Power Allocated (Watts DC 25 40 ------= 65 Fan Power Summary: Total Fans Fan Rule (Number of Fans) (Number of Fans) 6 6 Present Power (Watts DC 153 Power Allocated (Watts DC 480 >SHOW ENCLOSURE STATUS Enclosure: Status: Degraded Unit - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 55
Part Number : 448589-B21 Spare Part No.: 441832-001 Serial Number : P30590A9VUQ04B UUID : 18P30590A9VUQ04B Manufacturer : HP Firmware Ver. : 3.00 Nov 11 2009 Hw Board Type : 1 Hw Version : A0 >SHOW OA NETWORK Onboard Administrator #1 Network Information: Name: OA-0018FE27577F - - - - - - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 56
Time zone changed to CST+6 Nov 9 10:21:13 OA: LCD Status is: OK. Nov 9 10:21:17 Enclosure-Link: Service started Nov 9 10:21:20 OA: Onboard Administrator booted successfully Nov 9 10:21:21 netreg: DDNS: Update refused by DNS server Nov 9 10:21:24 OA: PS Subsystem N + N Redundancy - FAILED. Allocated - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 57
Rack Name: UnnamedRack >SHOW SNMP SNMP Configuration: Status: Enabled System Name: OA-0018FE27577F System Location Product Name: GbE2c Ethernet Blade Switch Width: Single URL to Management interface: In-Band IPv4 Address: 16.84.189.106 User Assigned Name: Part Number: 410917-B21 Spare Part Number - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 58
2. Ethernet Product Name: Cisco Catalyst Blade Switch 3120X for HP w/ IP Base Width: Single URL to Management interface: http://16.84.189.148 In-Band IPv4 Address: 16.84.189.148 User Assigned Name: Switch Part Number: WS-CBS3120X-S Spare Part Number: 451357-001 Serial Number: FOC1129T0XE Temperature - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 59
Bay Device PowerDelay State Delay (seconds) 1 GbE2c Ethernet Blade Switch Disabled 0 2 Cisco Catalyst Blade Switch 3120 Disabled 0 3 Absent Disabled 0 4 Absent Disabled 0 >SHOW SERVER LIST Bay iLO Name iLO IP Address Status Power UID Partner 1 ILOUSM64204B1 16.84.190.209 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 60
Part Number: 416667-B21 Spare Part Number: 410293-001 Blade 2 Model: ProLiant BL480c G1 Manufacturer: HP Serial Number: USM65103VJ Part Number: 435460-B21 Spare Part Number: 438453-001 Blade 4 Model: ProLiant BL460c G1 Manufacturer: HP Serial Number: USM62401EP Part Number: 404664-B21 Spare Part - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 61
Part Number: 412140-B21 Spare Part Number: 413996-001 Power Supply 1 Model: HP PROLIANT SERVER PS Serial Number: 531300ALL00233 Part Number: 438203-001 Spare Part Number: XXXXXX-001 Power Supply 2 Model: HP PROLIANT SERVER PS Serial Number: 531300ALL00014 Part Number: 438203-001 Spare Part Number - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 62
ALL Server Blade #1 Information: Type: Server Blade Manufacturer: HP Product Name: ProLiant BL480c G1 Part Number: 416667-B21 System Board Spare Part Number: 410293-001 Serial Number: USM64204B1 UUID: 36363134-3736-5355-4D36-343230344231 Server Name: RonChangedHostNameInILO Asset Tag: [Unknown] ROM - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 63
Blade Installed Server Blade #4 Information: Type: Server Blade Manufacturer: HP Product Name: ProLiant BL460c G1 Part Number: 404664-B21 System Board Spare Part Number: 410299-001 Serial Number: USM62401EP UUID: 36343034-3436-5355-4D36-323430314550 Server Name: YOUR-EYZCGYAYBB Asset Tag: [Unknown - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 64
005 absent> Blade 006 absent> Blade 007 absent> Blade 008 absent> >SHOW SERVER STATUS ALL Blade #1 Status: Power: On Current Wattage used: 212 Health: OK Unit Identification LED: Off Diagnostic Status: Internal Data OK Management Processor OK I/O Configuration OK Power OK - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 65
OK Blade #5 Status: Server Blade Type: Bay Subsumed Blade #6 Status: Server Blade Type: Bay Subsumed Blade #7 Status: Power: No Server Blade Installed Blade #8 Status: Power: No Server Blade Installed >SHOW SERVER TEMP ALL Device Bay #1 Temperature Information Locale Status Memory - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 66
[Bay empty] 8 - [Bay empty] >SHOW SERVER POWERDELAY ALL Current PowerDelay Status: Not in Progress Bay Device PowerDelay State Delay (seconds) 1 ProLiant BL480c G1 Disabled 0 1A Absent Disabled 0 1B Absent Disabled 0 2 ProLiant BL480c G1 Disabled 0 2A Absent Disabled 0 2B - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 67
Diskette Drive (A:) USB Hard Drive (C:) Server Blade #5 Boot Information: The blade is not present. Server Blade #6 Boot Information: The blade is not present. Server Blade #7 Boot Information: The blade is not present. Server Blade #8 Boot Information: The blade is not present. >SHOW SYSLOG - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 68
="Rack Infrastructure" LAST_UPDATE="[NOT SET] " INITIAL_UPDATE="[NOT SET] " COUNT="1" DESCRIPTION="Server Blade Enclosure LAN Settings Changed (Enclosure Serial Number Unknown)" /> Server 2 Syslog: - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 69
1726-Drive Array - Array Accelerator Memory Size Change Detected" /> < Configured" /> - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 70
Administrator Privilege Level ---------Admin User Acct. Status --------Enabled Enabled >SHOW LDAP INFO Directory Services (LDAP) Enabled : Disabled Local Users Enabled : Enabled NT Name Mapping : Disabled Directory Server : Directory Server SSL Port : 0 Search Context #1 : Search - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 71
Owner Field : Disabled : Disabled : Subject >SHOW PASSWORD SETTINGS Strong Passwords: Minimum Password Length: Disabled 3 >SHOW UPDATE Device Name Location Version NewVersion TRAY | BladeSystem c3000 Onboard Administrator | - | 2.9 | 2.9 LCD | BladeSystem c3000 Insight Display - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 72
21 13:23:00 2010 SHOW DEVICE SERIAL_NUMBER BLADE • Command: SHOW DEVICE SERIAL_NUMBER BLADE • Description: Shows the specified direct attached blade device serial number • Access level/Bay level: o All o Bay specific • Restrictions: Dependent on bay privileges Example OA-0016355E560A - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 73
Interconnect Bay User No Interconnect remote console sessions were detected. General management commands 73 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 74
EBIPA CAUTION: : This command cycles power to the interconnect and causes a loss of connectivity. • Command: DISABLE EBIPA {SERVER|INTERCONNECT} [ALL | ]] • Description: Disables the ability of the Onboard Administrator to give devices in the bays IP addresses using DHCP. If - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 75
CAUTION: This command cycles power to the interconnect and causes a loss of connectivity. • Command: ENABLE EBIPA {SERVER|INTERCONNECT} [ALL | ]] • Description: Enables the Onboard Administrator to provide IP addresses to the devices in the bays using DHCP. If you do not - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 76
{ } | { NETMASK } | { GATEWAY } | { DOMAIN } [ ALL | [{- | ,} ] • Description: Sets EBIPA settings for device (server) bays. If the bay number parameter is not specified, the settings will be applied to all device bays. The - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 77
Displays EBIPA information • Access level/Bay level: Administrator, Operator, user • Restrictions: None Example OA-0018FE27577F> SHOW EBIPA EBIPA Device Server Settings Bay Enabled EBIPA/Current Netmask Gateway DNS Domain 1 Yes 172.16.211.111 255.255.0.0 172.16.0.1 172.16.0.1 test.com - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 78
6B Yes 172.16.211.132 255.255.0.0 7 Yes 172.16.211.117 255.255.0.0 7A Yes 172.16.211.125 255.255.0.0 7B Yes 172.16.211.133 255.255.0.0 8 Yes 172.16.211.118 255.255.0.0 8A Yes 172.16.211.126 255.255.0.0 8B Yes 172.16.211.134 255.255.0.0 172.16.0.1 172.16.0.1 172.16.0.1 172.16.0.1 172.16.0.1 172.16 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 79
to 128. ADD OA DNS • Command: ADD OA DNS [] • Description: Adds an IP address of a DNS server to the list. DNS servers are used if the system is configured to use a static IP address. If a bay number is not specified, the command defaults to the active Onboard Administrator - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 80
A maximum of two DNS servers can be added. o The new trap receiver address to the SNMP configuration. Defaults for the traps are version to receive SNMP traps. o Only v1 traps are supported. o The value can be an IPv4 Command: ADD SSHKEY • Description: - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 81
OA administrator, OA operator • Restrictions: Clearing the Primary NTP server disables NTP. CLEAR SSHKEY • Command: CLEAR SSHKEY • Description: Removes the authorized key file used for SSH login • Access level/Bay level: Administrator • Restrictions: None Enclosure network configuration commands 81 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 82
• Restrictions: None DISABLE DHCPV6 • Command: DISABLE DHCPV6 {} • Description: Disable DHCPv6 mode of the OA external interface. Server. This setting takes effect immediately. • Access level/Bay level: OA administrator, OA operator • Restrictions: None Enclosure network configuration - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 83
: Disables IPv6 protocol of the Onboard Administrator external interface. If a bay number is not specified, then the command defaults to the active Onboard Administrator. • Access level/Bay level: OA administrator, OA operator • Restrictions: None Enclosure network configuration commands 83 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 84
. Does not clear any NTP servers that have been configured. • Access level/Bay level: OA administrator, OA operator • Restrictions: None DISABLE ROUTER ADVERTISEMENTS • Command: DISABLE ROUTER ADVERTISEMENTS {} • Description: Disables auto-configuration of IPv6 addresses from Router - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 85
DISABLE SNMP • Description: Disables SNMP support for the Onboard Administrator. Does not clear the SNMP trap receivers that have been configured. SNMP trap receivers can still be added and removed. If you disable SNMP, then Insight Manager Agents do not work properly. • Access level/Bay level: - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 86
> • Description: Downloads a previously saved configuration script file from a specific IP host, and then executes it. Supported protocols are HTTP, FTP, TFTP, and If your FTP server does not support anonymous connections, then specify a user name and password by replacing the host part in the above - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 87
: You can only issue this command if the configuration has been set up. ENABLE DHCPV6 • Command: ENABLE DHCPV6 {} • Description: Enables DHCPv6 mode to the Onboard Administrator. In DHCPv6 mode, IPv6 and DNS addresses are obtained from the DHCPv6 Server. This setting takes effect - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 88
NTP • Description: Enables NTP support for the Onboard Administrator • Access level/Bay level: OA administrator, OA operator • Restrictions: None ENABLE ROUTER ADVERTISEMENTS • Command: ENABLE ROUTER ADVERTISEMENTS {} • Description: Enables auto-configuration of IPv6 addresses from - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 89
• Restrictions: None ENABLE SNMP • Command: ENABLE SNMP • Description: Enables SNMP Trap support for the Onboard Administrator • Access level/Bay level: OA administrator, OA operator • Access level/Bay level: OA administrator • Restrictions: None Enclosure network configuration commands 89 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 90
>] • Description: Removes the IP address of a DNS server from the list for the specified Onboard Administrator. The DNS servers are used only if the system is configured to use a static IP address. If no bay number is provided, the command default to the active Onboard Administrator - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 91
specified Onboard Administrator. If a bay number is not specified, then the command administrator, OA operator • Restrictions: o A maximum of two DNS servers can be added. o The must be in Removes an existing trap receiver from the SNMP configuration. If the same is listed - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 92
Command: SET ALERTMAIL SMTPSERVER [ ] • Description: Sets the SMTP server. This is the mail server where the Onboard Administrator delivers its e-mail based events. The value : IPv6 addresses cannot specify the network prefix length. Enclosure network configuration commands 92 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 93
>] • Description: o Sets the network default gateway. o This command is used if the system is configured to use a static IP address. o If you do not specify a bay number, the command defaults to the active Onboard Administrator. • Access level/Bay level: OA administrator, OA operator - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 94
} [] [DYNAMICDNS] [ [ []]] • Description: o Configures IP settings for the of the system when it is received from the DHCP server. o SET IPCONFIG DHCP [] [DYNAMICDNS] • Access level/Bay level: OA administrator, - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 95
SET NTP PRIMARY • Command: SET NTP PRIMARY • Description: Sets the primary server used for synchronizing time and date using the NTP. The value can be CONTACT • Command: SET SNMP CONTACT "" • Description: Configures the name of the system contact. The default contact is blank - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 96
community name is public. o The default write community name is public. SET SNMP LOCATION • Command: SET SNMP LOCATION "" • Description: Configures the SNMP location of the enclosure. The default location is blank. • Access level/Bay level: OA administrator, OA operator • Restrictions: The - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 97
secondary DNS addresses o MAC address o HTTP and HTTPS server status o SNMP status o SSH status o Telnet status o NTP status o Trusted Host status • Access level/Bay level: All • Restrictions: VLAN :27:57:7F Network Link Settings: Link Auto-negotiation Enclosure network configuration commands 97 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 98
hp.com SMTP Server: 16.84.189.199 Sender Domain: Not Set XML Reply: Enabled NTP: Enabled Primary NTP server: 2001::11 Secondary NTP server: 16.84.190.248 Server Poll-Interval: 60 seconds Last Update: 13 Jun 04:52:23 from 16.84.190.248 Link Loss Failover: Not Supported SNMP Configuration: Status: - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 99
• Restrictions: None Example Firmware Version: 2.20 Built: 04/14/2008 @ 14:04 OA Bay Number: 1 OA Role: Active Authenticating with public key "rsa-key-123456789" TEST ALERTMAIL • Command: TEST ALERTMAIL • Description: Sends a test AlertMail message to the configured - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 100
OA permission to perform this command. TEST SNMP • Command: TEST SNMP • Description: Sends a test SNMP trap to all of the configured trap destinations • Access level/Bay level: OA administrator • Restrictions: You must enable SNMP to use this function Enclosure network configuration commands 100 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 101
restore this information after you delete it. • Command: CLEAR SYSLOG {ENCLOSURE | OA } • Description: Clears the Onboard Administrator system log. If you do not specify a bay number, the Active Onboard Administrator system log is cleared. • Access level/Bay level: OA administrator - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 102
: You must have OA permission to perform this command RESTART OA • Command: RESTART OA [] • Description: Resets the Onboard Administrator module specified by . If no bay number is given, then the Onboard Administrator the user is logged in to is restarted. • Access level - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 103
: SET DISPLAY EVENTS {ON | OFF} • Description: o Turns the displaying of events that are triggered by status changes in the system on or off. o This command is specific to the CLI session, and must be issued for every CLI session to display events in that session. • Access level/Bay level: All - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 104
1 to 32 characters long and includes all alphanumeric, underscore (_), and dash (-) characters. SET ENCLOSURE PART_ NUMBER • Command: SET ENCLOSURE PART_NUMBER "" • Description: Sets the part number of the enclosure • Access level/Bay level: OA administrator • Restrictions: Must be 10 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 105
level/Bay level: OA administrator • Restrictions: 1, 2, 3, 4 SET ENCLOSURE SERIAL_NUMBER • Command: SET ENCLOSURE SERIAL_NUMBER "" • Description: Sets the enclosure serial number. • Access level/Bay level: OA administrator • Restrictions: Must be 10 characters in length. Acceptable - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 106
MODE {NOTREDUNDANT | REDUNDANT | POWERSUPPLY} • Description: o Configures redundancy settings. o The NOTREDUNDANT setting enables all power supplies OA operator • Restrictions: None SET POWER LIMIT • Command: SET POWER LIMIT { | OFF} • Description: Sets or removes a limit on how much input - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 107
efficiency, resulting in less power consumption. • Access level/Bay level: OA administrator, OA operator • Restrictions: The power savings mode is not supported for low voltage on the c7000 Enclosure. SET TIMEZONE • Command: SET TIMEZONE "" • Description: Sets the time zone See Time zone - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 108
SET SERVER POWERDELAY 1 0 SET SERVER POWERDELAY 2 0 SET SERVER POWERDELAY 3 0 SET SERVER POWERDELAY 4 0 SET SERVER POWERDELAY 5 0 SET SERVER POWERDELAY 6 0 SET SERVER POWERDELAY 7 0 SET SERVER POWERDELAY 8 0 SET SERVER POWERDELAY 1A 0 SET SERVER POWERDELAY 2A 0 SET SERVER POWERDELAY 3A 0 SET SERVER - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 109
percent of Maximum speed Maximum speed: 18000 Minimum speed: 10 Power consumed: 21 Product Name: Active Cool 200 Fan Part Number: 412140-B21 Spare Part Number: 413996-001 Version: 2.7 Diagnostic Status: Internal Data OK Location OK Device Failure OK Device Degraded OK Missing Device - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 110
INFO Enclosure Information: Enclosure Name: Shorty Enclosure Type: BladeSystem c3000 Enclosure Part Number: 123456-B21 Serial Number: 0987654321 UUID: 1234567891011 Asset Tag: ENC-0000Short Midplane Spare Part Number: 123456-001 Power Distribution Unit: [No PDU is present on c3000 enclosures - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 111
: OK Display : Off Name : BladeSystem c3000 Insight Display Spare Part# : 441831-001 Manufacturer: HP Fw Version : 2.0 Diagnostic Status: Internal Data OK SHOW ENCLOSURE POWER_SUMMARY • Command: SHOW ENCLOSURE POWER_SUMMARY • Description: Displays a detailed summary of the enclosure - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 112
| ]} • Description: Displays: o Power supply status o AC input status o Capacity o Input voltage range #1 (measured in V) o Input voltage range #2 (if necessary; measured in V) o Input frequency range (measured in Hz) o Part number o Serial number o Hardware - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 113
Product Name: HP PROLIANT SERVER PS Part Number: 438203-001 Spare Part Number: XXXXXX-001 Product Ver: Diagnostic Status: Internal Data OK Device Failure OK Power Cord OK SHOW ENCLOSURE STATUS • Command: SHOW ENCLOSURE STATUS • Description: Displays the basic health and status of the - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 114
Service for troubleshooting, repair, and ordering replacements. • Access level/Bay level: All Bay specific • Restrictions: You must have access to the specified bay. Example OA-0018FE27577F> show fru Enclosure Model: BladeSystem c3000 Enclosure Manufacturer: HP Serial Number: 0987654321 Part Number - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 115
Administrator Manufacturer: HP Serial Number: P30590A9VUQ04B Part Number: 448589-B21 Spare Part Number: 441832-001 Firmware Version: 2.40 HwVersion: A0 Blade 1 Model: ProLiant BL480c G1 Manufacturer: HP Serial Number: USM64204B1 Part Number: 416667-B21 Spare Part Number: 410293-001 Blade 2 Model - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 116
c3000 Insight Display Manufacturer: HP Spare Part Number: 441831-001 Firmware Version: 2.2.2 SHOW OA • Command: SHOW OA {CERTIFICATE | INFO | NETWORK | STATUS | USB} [ALL | ]] • Description: Displays the certificate information, network configuration, status, or USB mode of - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 117
Issued by: OA-0018FE27577F Valid from: 2007-02-01T09:54:30Z Valid until: 2017-01-29T09:54:30Z Serial Number Product Name : BladeSystem c3000 Onboard Administrator Part Number : 123456-B21 Spare Part No.: 123456-001 Serial Number : PLO590A9FDJ8 UUID : 123P4R5T6YVUQ04B Manufacturer : HP Firmware - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 118
• Description: Displays the network configuration for the specified Onboard Administrator. If you do Full Duplex Link Status: Active Enclosure IP Mode: Not Supported SHOW OA STATUS • Command: SHOW OA STATUS [ALL | ]] • Description: Displays health status for the Onboard - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 119
UID: Off Status: OK SHOW on the near KVM Option Module. o This command has no effect on HP c3000 OA boards that are hardware revision level C0 and later. Hardware revision Command: SHOW POWER • Description: Displays the current power configuration • Access level/Bay level: All • Restrictions: None - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 120
SERVER | ENCLOSURE | OA | SETTINGS} • Description: Displays the syslog of the enclosure with 22 lines per screen. To quit the command, enter q. Any other key shows the next screen, if there is more information to display. • Access level/Bay level: Bay specific [email protected] - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 121
• Access level/Bay level: OA administrator, OA operator, OA user • Restrictions: None Example OA-0018FE27577F> SHOW SYSLOG OA Apr 2 16:21:22 in.ftpd[25446]: connection from 12.34.567.890 Apr 2 16:21:24 in.ftpd[25446]: exiting due to EOF from client Apr 2 16:21:35 in.ftpd[25451]: connection from 12. - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 122
FAN | Active Cool 200 Fan | 6 | 2.7.4 | 2.7.4 UPDATE ILO • Command: UPDATE ILO {ALL | ]} • Description: o The iLO command downloads a new flash image from the network and uses it to update the firmware for iLO. o Supported protocols are HTTP, HTTPS, TFTP, and FTP - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 123
This command is not applicable to HP Integrity server blades. UPDATE IMAGE • Command: UPDATE IMAGE {[FORCE] | SYNC} • Description: o The IMAGE command downloads a new flash image from the network and uses it to update the Onboard Administrator firmware. If a redundant Onboard Administrator is - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 124
as: protocol://host/path/filename. • The URL syntax for IPv6 addresses is protocol://[]/path/file. • If your FTP server does not support anonymous logins, you can specify a user name and password within the URL formatted as: ftp://username:password@host/path/filename. • Access - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 125
Blade management commands CONNECT SERVER • Command: CONNECT SERVER [SERIAL] • Description: Opens a Text Console session to the iLO specified. If the optional argument SERIAL is specified, a Virtual Serial Port session is started. • Access level/Bay level: All Bay specific • Restrictions - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 126
(URB) reporting has been enabled. HPONCFG • Command: HPONCFG [NOAUTOLOGIN] {ALL | ]} { - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 127
level/Bay level: Administrator, operator Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to storage blades. REBOOT SERVER • Command: REBOOT SERVER {ALL | ]} [FORCE] [{NORMAL |PXE | HDD | RBSU}] • Description - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 128
Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to storage blades o This command is not applicable to HP Integrity server blades. o This setting is only valid on present blades and cleared if the blade is removed. SET SERVER BOOT - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 129
to HP Integrity server blades. o This setting is valid only on present blades and is cleared if the blade is removed. SET SERVER POWERDELAY • Command: SET SERVER POWERDELAY {ALL | ]} {number of seconds to delay power | NOPOWERON} • Description: Set the PowerDelay status for - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 130
: SHOW SERVER BOOT {ALL | ]} • Description: Displays the boot settings for the specified servers • Access level/Bay level: All Bay specific • Restrictions: o You must have access to the specified bay o This command is not applicable to HP Integrity server blades. Example - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 131
show server info 1 Server Blade #1 Information: Type: Server Blade Manufacturer: HP Product Name: ProLiant BL480c G1 Part Number: 416667-B21 System Board Spare Part Number: 410293-001 Serial Number: USM64204B1 UUID: 36363134-3736-5355-4D36-343230344231 Server Name: [Unknown] Asset Tag: [Unknown] ROM - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 132
Type: iLO Name: ILOUSM64204B1 Firmware Version: 1.60 Jul 01 server blades to which the current user has access • Access level/Bay level: All Bay specific • Restrictions: You must have access to the specified bay number. Example OA-0018FE27577F> SHOW SERVER LIST Bay iLO Name iLO IP Address Status - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 133
Bay level: All Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to storage blades. Example OA-0018FE27577F> SHOW SERVER PORT MAP ALL Mezz Slot ---- Mezz Mezz Device Port Interconnect Interconnect Device Port Status Bay Bay Port - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 134
Blade 006 absent> Blade 007 absent> Blade 008 absent> SHOW SERVER POWERDELAY • Command: SHOW SERVER POWERDELAY {ALL | ]} • Description: Displays the PowerDelay status for the specified server blade or range of server blades • Access level/Bay level: All Bay specific - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 135
6B Absent Disabled 7 ProLiant BL460c G1 Disabled 7A Absent Disabled 7B Absent Disabled 8 AiO SB600c Storage Disabled 8A Absent Disabled 8B Absent Disabled Delay (seconds) SHOW SERVER STATUS • Command: SHOW SERVER STATUS {ALL | ]} • Description: Displays the - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 136
OK I/O Configuration OK Power OK Cooling OK Location OK Device Failure OK Device Degraded OK Blade #3 Status: Power: No Server Blade Installed Blade #4 Status: Power: No Server Blade Installed Blade #5 Status: Server Blade Type: Bay Subsumed Blade #6 Status: Server Blade Type: Bay - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 137
for a specified server blade or range of server blades • Access level/Bay level: All Bay specific • Restrictions: You must have access to the specified bay number. Example OA-0018FE27577F> SHOW SERVER TEMP ALL Device Bay #1 Temperature Information Locale Status Memory Zone OK CPU - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 138
for the specified server blade • Access level/Bay level: All Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to HP Integrity server blades. Example OA-0018FE27577F> show syslog server 7 Retrieving Server syslog(s) ... Server 7 Syslog - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 139
13:54" INITIAL_UPDATE="10/08/2007 13:54" COUNT="1" DESCRIPTION="Server Blade Enclosure LAN Settings Changed (Enclosure Serial Num ber shorty-lab)" /> --More-- UNASSIGN SERVER • Command: UNASSIGN SERVER {ALL | ]} {"" | LDAP GROUP ""} • Description - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 140
: None CLEAR INTERCONNECT SESSION • Command: CLEAR INTERCONNECT SESSION • Description: Terminates a serial console session of a user on loses any unsaved work. • Access level/Bay level: Administrator, operator Bay specific • Restrictions: You must have explicit access to a bay given by - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 141
sends the URB message to the endpoint. This command can be useful for testing the configuration or resending a message after a failure. If the test fails, executing the TEST URB command updates the last attempt status and log a syslog message. • Access level/Bay level: OA Administrator, OA Operator - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 142
Bay specific • Restrictions: You must have explicit access to a bay given by the ASSIGN INTERCONNECT command. SET INTERCONNECT POWERDELAY • Command: SET INTERCONNECT POWERDELAY {ALL | ]} {number of seconds to delay power | NOPOWERON} • Description: Sets the PowerDelay status - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 143
INFO [ALL | | -] • Description: Displays: o Interconnect type o Manufacturer name o Product name o Product part number o Product version o Product serial number o Asset tag o VLAN ID • Access level/Bay level: All Bay specific • Restrictions: You must have - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 144
info all show interconnect info all 1. Ethernet Product Name: GbE2c Ethernet Blade Switch Width: Single URL to Management interface: In-Band IPv4 Address: 16.84.189.177 User Assigned Name: Part Number: 410917-B21 Spare Part Number: 414037-001 Serial Number: MY36290EMT Temperature Sensor: Present JS2 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 145
number • Access level/Bay level: All Bay specific • Restrictions: You must have explicit access to a bay given by the ASSIGN INTERCONNECT command. Example OA-0018FE27577F> SHOW INTERCONNECT PORT MAP ALL 1: Cisco Catalyst Blade Switch 3120X for HP w/ IP Base Type: Ethernet Width: Single Status - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 146
Disabled Delay (seconds) SHOW INTERCONNECT STATUS • Command: SHOW INTERCONNECT STATUS {ALL | | -} • Description: Displays interconnect status information; UID state and health state • Access level/Bay level: All Bay specific • Restrictions: You must have - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 147
Processor OK Thermal Warning OK Thermal Danger OK I/O Configuration OK Device Failure OK Device Degraded OK Interconnect Module #2 Status: Interconnect Module Type: No Interconnect Module Installed Interconnect Module #3 Status: Interconnect Module Type: No Interconnect Module Installed - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 148
must have access to the specified bay number. SHOW SERVER DVD • Command: SHOW SERVER DVD {ALL | ]} • Description: Displays the DVD connection status for the specified server or range of servers • Access level/Bay level All Bay specific • Restrictions: You must have access to - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 149
6 7 No 8 - [Bay empty] [Non-server blade] Enclosure DVD commands 149 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 150
operator or administrator with OA permission to perform this command. SET REMOTE SYSLOG PORT • Command: SET REMOTE SYSLOG PORT • Description: Set the IP port number for remote system log. Setting the remote port is optional. If it is not set, the default UDP port 514 is used to send system - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 151
SET REMOTE SYSLOG SERVER • Command: SET REMOTE SYSLOG SERVER { | } • Description: Sets the IP address or DNS name for remote system log messages. • Access level/Bay level: OA administrator • Restrictions: None - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 152
and time stamp, the Onboard Administrator IP address, text, and a priority number. The date and time stamp, and the text match the Onboard Administrator syslog entry. Sep 9 16:00:28 10.128.126.204 OA: Remote system logging enabled to server 16.83.33.81, port 514 (priority 13) Remote syslog commands - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 153
DOWNLOAD CONFIG using USB key • Command: DOWNLOAD CONFIG • Description: Downloads a saved configuration file from a specific IP host. The file is not checked for errors but is automatically executed in SCRIPT MODE. Supported protocols are HTTP, FTP, TFTP, and USB. Format the as protocol - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 154
o If your FTP server does not support anonymous logins, a username and password can be specified within the URL formatted as: ftp://username:password@host/path/filename. o Use FORCE to enable downgrading firmware even if settings and passwords might be lost. o The UPDATE IMAGE SYNC command initiates - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 155
: Uploads a script to the specified URL which duplicates the current runtime configuration. Supported protocols are FTP, TFTP, and USB. The URL should be formatted as: protocol://host/path/filename. If your FTP server does not support anonymous logins, you can specify a user name and password within - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 156
VLAN commands ADD VLAN • Command: ADD VLAN [""] • Description: Creates a VLAN ID and an optional VLAN NAME. • Access level/Bay level: OA administrator, OA operator • Restrictions: o The VLAN ID is an integer from 1 to 4094. o The VLAN Name is limited to 31 alphanumeric - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 157
level/Bay level: OA administrator, OA operator • Restrictions: The user cannot remove the default VLAN ID. SAVE VLAN • Command: SAVE VLAN • Description: Save VLAN configuration data to FLASH. • Access level/Bay level: OA administrator, OA operator • Restrictions: This command only applies to VLAN - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 158
• Command: SET VLAN INTERCONNECT { ALL | ] } • Description: Sets the VLAN ID for the specified interconnect (typically used in a remote configuration) undoes the changes it made in 5 minutes. To permanently save the changes, issue the SET VLAN IPCONFIG SAVE command - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 159
>] • Description: Temporarily sets the OA to static IP mode and the specified VLAN ID (0 to 4094). Setting the VLAN ID number to 0 disables enclosure VLAN. Any other setting enables the enclosure VLAN. • Access level/Bay level: OA administrator, OA operator • Restrictions: VLAN ID must - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 160
0 to cancel the command. Any newly issued revert command takes precedence over an outstanding one. • Access level/Bay level: OA administrator, OA operator • Restrictions: None SET VLAN SERVER • Command: SET VLAN SERVER { ALL | ] } • Description: Sets the VLAN ID for - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 161
SHOW VLAN • Command: SHOW VLAN • Description: Shows VLAN settings. • Access level/Bay level: OA administrator, OA operator, OA user • Restrictions: None Example OA-0018FE27577F> show vlan show vlan VLAN is enabled. OA VLAN ID = 1. Default VLAN ID (untagged) = 1. VLAN VLAN NAME 1 Default Device - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 162
last takes precedence. SET ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE • Command: SET ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE [NONE | }] • Description: Specifies bays to omit from Enclosure Dynamic Power Cap. Blades in omitted bays are treated as unmanaged components of the system: They - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 163
Dynamic Power Cap value that can be applied to the enclosure. Any blades in bays not specified are managed. If you have previously specified bays to exclude, using this command again replaces that specification rather than augmenting it. • Access level/Bay level: OA administrator, OA operator - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 164
Example OA-0018FE27577F> show enclosure power_cap_bays_to_exclude Bays opted out: None Enclosure Dynamic Power Cap commands 164 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 165
into the enclosure. The thermal status of a blade changed A blade was removed from the enclosure. The port mapping information of a blade was updated. A change in status has occurred because of a change in the state of one or more hardware components or server readings. Event notifications 165 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 166
Name Changed OA Inserted OA Removed OA Takeover Power Supply Status Change Power Supply Inserted Power Supply Removed Power Supply Redundancy Change module was reset. The port mapping information of an interconnect module was updated. A LDAP group was removed from the Onboard Administrator. If you - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 167
Event User Removed User Disabled User Rights Cause A user was removed from the Onboard Administrator. If you are logged in as this user, you are disconnected from the Onboard Administrator. A user was disabled. If you are logged in as this user, you are disconnected from the Onboard Administrator. - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 168
to have the following information available before you call HP: • Technical support registration number (if applicable) • Product serial number • Product model name and number • Product identification number • Applicable error messages • Add-on boards or hardware • Third-party hardware or software - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 169
time zone settings IMPORTANT: Time zones must be entered exactly as they appear. The following table provides the Universal time zone settings that are supported by the Onboard Administrator. CET CST6CDT EET EST EST5EDT Etc/GMT Etc/GMT0 Etc/GMT-0 Etc/GMT+0 Etc/GMT-1 Etc/GMT+1 Etc/GMT-2 Etc - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 170
: Time zones must be entered exactly as they appear. The following table provides the Americas time zone settings that are supported by the Onboard Administrator. America/Adak America/Anchorage America/Anguilla America/Antigua America/Araguaina America/Aruba America/Asuncion America/Atka America - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 171
zone settings IMPORTANT: Time zones must be entered exactly as they appear. The following table provides the Asian time zone settings that are supported by the Onboard Administrator. Asia/Aden Asia/Almaty Asia/Amman Asia/Anadyr Asia/Damascus Asia/Dhaka Asia/Dili Asia/Dubai Asia/Krasnoyarsk Asia - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 172
: Time zones must be entered exactly as they appear. The following table provides the Oceanic time zone settings that are supported by the Onboard Administrator. Atlantic/Azores Atlantic/Bermuda Atlantic/Canary Australia/NSW Australia/Perth Australia/Queensland NZ-CHAT Pacific/Apia Pacific - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 173
: Time zones must be entered exactly as they appear. The following table provides the European time zone settings that are supported by the Onboard Administrator. Eire Europe/Amsterdam Europe/Andorra Europe/Athens Europe/Belfast Europe/Belgrade Europe/Berlin Europe/Bratislava Europe/Brussels - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 174
processing unit DDNS Dynamic Domain Name System DHCP Dynamic Host Configuration Protocol DNS domain name system EBIPA Enclosure Bay IP Addressing FRU field replaceable unit FTP file transfer protocol GUI graphical user interface HP SIM HP Systems Insight Manager Acronyms and abbreviations 174 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 175
HTTP hypertext transfer protocol HTTPS hypertext transfer protocol secure sockets IA interface adapter ICMP Internet Control Message Protocol iLO Integrated Lights-Out IP Internet Protocol LDAP Lightweight Directory Access Protocol LED light-emitting diode MAC Media Access Control NIC network - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 176
Management Protocol SOAP Simple Object Access Protocol SSH Secure Shell SSO single sign-on TFTP Trivial File Transfer Protocol UID unit identification URB utility ready blade URL uniform resource locator XML extensible markup language Acronyms and abbreviations 176 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 177
INTERCONNECT 139 ASSIGN OA 22 ASSIGN OA LDAP GROUP 33 authorized reseller 167 B Blade management commands 124 C CLEAR INTERCONNECT SESSION 139 CLEAR NTP 80 CLEAR SCREEN 17 VCMODE 81 command, CONNECT INTERCONNECT 140 command, CONNECT SERVER 124 command, DISABLE ALERTMAIL 81 command, DISABLE CRL 29 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 178
command, SET ALERTMAIL SENDERDOMAIN 91 command, SET ALERTMAIL SMTP SERVER 91 command, SET DATE 101 command, SET DEVICE_SERIAL_NUMBER_BLADE 45 command, SET LDAP NAME 35 command, SET LDAP PORT 36 command, SET LDAP SERVER 36 command, SET LLF INTERVAL 104 command, SET MINIMUM PASSWORD LENGTH 24 command - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 179
SET VLAN SERVER 159 command, SHOW ALL 46 command, SHOW CA CERTIFICATE 30 command, SHOW CONFIG 106 command, SHOW DATE 107 command, SHOW DEVICE SERIAL NUMBER BLADE 72 145 command, SHOW INTERCONNECT SESSION 72 command, SHOW INTERCONNECT STATUS 145 command, SHOW LDAP CERTIFICATE 36 command, SHOW LDAP - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 180
OA LDAP GROUP 38 command, UNASSIGN SERVER 138 command, UPDATE 121 command, UPDATE ILO 121 command, UPDATE IMAGE 122 command, UPDATE IMAGE using USB key 153 command, network configuration commands 78 error messages 164 errors, fan 164 errors, power supply failure 164 errors, server blade failure 164 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 181
23 HP SIM commands 40 HPONCFG 125 I iLO AutoLogin 16 Integrity blade restrictions 13 Interconnect management commands 139 IP addresses, setting up 12 L Linux support 12 local access 10 LOGOUT 17 O Oceanic time zone 171 P PING 44 polar time zone 172 POWEROFF INTERCONNECT 140 POWEROFF SERVER 125 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 182
SHOW OA NETWORK 116 SHOW OA STATUS 117 SHOW OA USB 118 SHOW PASSWORD SETTINGS 26 SHOW RACK NAME 19 SHOW SERVER BOOT 129 SHOW SERVER DVD 147 SHOW SERVER INFO 130 SHOW SERVER LIST 131 SHOW SERVER NAMES 131 SHOW SERVER PORT MAP 132 SHOW SERVER POWERDELAY 133 SHOW SERVER TEMP 136 SHOW SESSION TIMEOUT 27 - HP BL480c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 183
Authentication commands 29 U UNASSIGN 28 UNASSIGN FOR LDAP 38 UNASSIGN OA 28 UNASSIGN OA LDAP GROUP 38 UNASSIGN SERVER 138 universal time zone 168 UPDATE 121 UPDATE ILO 121 UPDATE IMAGE 122 UPDATE IMAGE using USB key 153 UPLOAD CONFIG 122 UPLOAD CONFIG using USB key 154 UPLOAD DEBUG 123 USB key
HP BladeSystem Onboard Administrator
Command Line Interface
User Guide
Version 3.00
Part Number 416217-404
February 2010 (Thirteenth Edition)