HP Brocade 8/12c Brocade Error Message Reference Guide v6.1.0 (53-1000600-02,
HP Brocade 8/12c Manual
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Brocade 8/12c manual content summary:
- HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 1
53-1000600-02 12 March 2008 Fabric OS Message Reference Supporting Fabric OS v6.1.0 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 2
code, please visit http://www.brocade.com/support/oscd. Brocade Communications Systems, Incorporated Corporate Headquarters Brocade Communications Systems, Inc. 1745 Technology Drive San Jose, CA 95110 Tel: 1-408-333-8000 Fax: 1-408-333-8101 Email: [email protected] European and Latin American - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 3
Manual April 2005 Fabric OS System Error Message 53-0000515-11 Added FICU-1010, HAMK-1004, and PLAT- July 2005 Reference Manual 1001 Fabric throughout: rebranding, supported hardware, CLI changes. 15 June 2007 Fabric OS Message Reference 53-1000600-01 Updated for Fabric OS v6.0.0: -Added - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 4
iv Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 5
xlvii How this document is organized xlvii Supported hardware and software xlvii What's new 2 System Logging Daemon (syslogd 3 System Console 3 Port Logs 4 Viewing and Configuring System Message Logs 4 Event Messages 9 Message Severity Levels 11 Fabric OS Message Reference v 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 6
11 Gathering Information About the Problem 12 Support 12 Panic Dump and Core Dump Files 12 Trace Dumps 13 supportSave Command 13 System Module Descriptions 13 Section I RASLog Messages Chapter 2 AG System Messages AG-1001 23 AG-1002 23 AG-1003 23 AG-1004 24 AG-1005 24 AG-1006 24 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 7
-1026 37 AUTH-1027 37 AUTH-1028 38 AUTH-1029 38 AUTH-1030 38 AUTH-1031 39 AUTH-1032 39 AUTH-1033 39 AUTH-1034 40 AUTH-1035 40 AUTH-1036 40 AUTH-1037 41 Fabric OS Message Reference vii 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 8
BL-1018 53 BL-1019 53 BL-1020 54 BL-1021 54 BL-1022 54 BL-1023 55 BL-1024 55 BL-1025 55 viii Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 9
66 BM-1055 66 BM-1056 66 BM-1058 67 C2 System Messages C2-1001 69 C2-1002 69 C2-1004 69 C2-1005 70 Fabric OS Message Reference ix 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 10
71 CDR-1003 71 CDR-1004 72 Chapter 10 CER System Messages CER-1001 73 Chapter 11 CONF System Messages CONF-1000 75 CONF-1001 75 CONF-1020 75 CONF-1021 76 -1006 79 EM-1007 79 EM-1008 79 EM-1009 79 EM-1010 80 EM-1011 80 EM-1012 80 EM-1013 81 EM-1014 81 EM-1015 81 EM-1016 82 EM - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 11
-1065 92 EM-1066 92 EM-2003 92 Chapter 13 ESS System Messages ESS-1001 95 ESS-1002 95 ESS-1003 95 ESS-1004 96 Fabric OS Message Reference xi 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 12
FABR-1024 106 FABR-1029 106 FABR-1030 107 FABR-1031 107 FABR-1032 107 FABR-1034 108 FABR-1035 108 FABR-1036 108 xii Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 13
FABR-1037 109 FABR-1038 109 FABR-1039 109 Chapter 16 FABS System Messages FABS-1001 111 FABS-1002 111 FABS-1004 111 FABS-1005 112 FABS-1006 112 FCPD-1001 123 FCPD-1002 123 FCPD-1003 123 Chapter 21 FCPH System Messages FCPH-1001 125 Fabric OS Message Reference xiii 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 14
FCR-1031 135 FCR-1032 135 FCR-1033 135 FCR-1034 136 FCR-1035 136 FCR-1036 136 FCR-1037 136 FCR-1038 137 xiv Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 15
Fabric OS Message Reference 53-1000600-02 FCR-1039 137 FCR-1040 137 FCR-1041 137 FCR-1042 138 FCR-1043 138 FCR-1048 138 FCR- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 16
FICN-1028 156 FICN-1029 156 FICN-1030 157 FICN-1031 157 FICN-1032 157 FICN-1033 157 FICN-1034 158 FICN-1035 158 xvi Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 17
Fabric OS Message Reference 53-1000600-02 FICN-1036 158 FICN-1037 158 FICN-1038 159 FICN-1039 159 FICN-1040 159 FICN-1041 160 FICN- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 18
-1081 171 FICN-1082 171 FICN-1083 171 FICN-1084 172 FICN-1085 172 FICN-1086 172 Chapter 24 FICU System Messages FICU-1001 173 FICU-1002 173 FICU-1003 173 FICU-1004 174 FICU-1005 174 1003 179 FLOD-1004 179 FLOD-1005 179 FLOD-1006 180 xviii Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 19
191 FW-1009 191 FW-1010 191 FW-1011 192 FW-1012 192 FW-1033 192 FW-1034 192 FW-1035 193 FW-1036 193 Fabric OS Message Reference xix 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 20
FW-1126 203 FW-1127 203 FW-1128 203 FW-1129 204 FW-1130 204 FW-1131 204 FW-1132 205 FW-1133 205 xx Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 21
Fabric OS Message Reference 53-1000600-02 FW-1134 205 FW-1135 206 FW-1136 206 FW-1137 206 FW-1138 206 FW-1139 207 FW- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 22
FW-1299 226 FW-1300 226 FW-1301 227 FW-1302 227 FW-1303 227 FW-1304 228 FW-1305 228 FW-1306 228 xxii Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 23
Fabric OS Message Reference 53-1000600-02 FW-1307 229 FW-1308 229 FW-1309 229 FW-1310 230 FW-1311 230 FW-1312 230 FW- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 24
FW-1373 251 FW-1374 252 FW-1375 252 FW-1376 252 FW-1377 253 FW-1378 253 FW-1379 253 FW-1400 254 xxiv Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 25
-1501 262 FW-1510 262 Chapter 31 HAM System Messages HAM-1001 263 HAM-1002 263 HAM-1004 263 HAM-1005 264 HAM-1006 264 Fabric OS Message Reference xxv 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 26
HIL-1308 275 HIL-1309 276 HIL-1310 276 HIL-1311 276 HIL-1401 276 HIL-1402 277 HIL-1403 277 HIL-1404 277 xxvi Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 27
IBD-1001 289 Chapter 38 IBPD System Messages IBPD-1001 291 IBPD-1002 291 IBPD-1003 291 Chapter 39 ICPD System Messages ICPD-1001 293 Fabric OS Message Reference xxvii 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 28
293 ICPD-1004 293 ICPD-1005 294 ICPD-1006 294 ICPD-1007 294 ICPD-1008 294 Chapter 40 IPAD System Messages IPAD-1000 297 IPAD-1001 297 Chapter 41 IPS System Messages IPS-1001 299 -1010 305 ISNS-1011 305 ISNS-1013 305 ISNS-1014 306 xxviii Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 29
MPTH-1002 317 MPTH-1003 317 Chapter 50 MQ System Messages MQ-1004 319 Chapter 51 MS System Messages MS-1001 321 MS-1002 321 Fabric OS Message Reference xxix 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 30
PDM-1006 332 PDM-1007 332 PDM-1008 333 PDM-1009 333 PDM-1010 333 PDM-1011 334 PDM-1012 334 PDM-1013 334 xxx Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 31
Messages PORT-1003 343 PORT-1004 343 PORT-1005 343 Chapter 58 PS System Messages PS-1000 345 PS-1001 345 PS-1002 345 PS-1003 345 PS-1004 346 PS-1005 346 Chapter 59 PSWP System Messages PSWP-1001 347 PSWP-1002 347 PSWP-1003 347 Fabric OS Message Reference xxxi 53-1000600 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 32
358 RPCD-1005 358 RPCD-1006 358 RPCD-1007 358 Chapter 63 RTWR System Messages RTWR-1001 359 RTWR-1002 359 RTWR-1003 360 xxxii Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 33
371 SEC-1037 372 SEC-1038 372 SEC-1040 372 SEC-1041 372 SEC-1042 373 SEC-1043 373 SEC-1044 373 SEC-1045 373 Fabric OS Message Reference 53-1000600-02 xxxiii - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 34
SEC-1084 382 SEC-1085 382 SEC-1086 382 SEC-1087 383 SEC-1088 383 SEC-1089 383 SEC-1090 384 SEC-1091 384 xxxiv Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 35
Fabric OS Message Reference 53-1000600-02 SEC-1092 384 SEC-1093 384 SEC-1094 385 SEC-1095 385 SEC-1096 385 SEC-1097 386 SEC- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 36
SEC-1185 403 SEC-1186 404 SEC-1187 404 SEC-1188 404 SEC-1189 405 SEC-1190 405 SEC-1191 405 SEC-1192 406 xxxvi Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 37
Fabric OS Message Reference 53-1000600-02 SEC-1193 406 SEC-1194 406 SEC-1195 406 SEC-1196 407 SEC-1197 407 SEC-1198 407 SEC- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 38
426 SULB-1005 426 SULB-1006 426 SULB-1007 426 SULB-1008 427 SULB-1009 427 SULB-1010 433 SULB-1011 433 SULB-1017 433 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 39
System Messages SYSC-1001 443 SYSC-1002 443 SYSC-1003 443 SYSC-1004 444 SYSC-1005 444 Chapter 72 SYSM System Messages SYSM-1001 445 Fabric OS Message Reference 53-1000600-02 xxxix - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 40
Messages TS-1001 453 TS-1002 453 TS-1006 454 TS-1007 454 TS-1008 454 Chapter 76 UCST System Messages UCST-1003 457 xl Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 41
WEBD-1006 462 WEBD-1007 462 WEBD-1008 462 Chapter 79 ZOLB System Messages ZOLB-1001 463 Chapter 80 ZONE System Messages ZONE-1002 465 ZONE-1003 465 ZONE-1004 465 ZONE-1005 466 ZONE-1006 470 ZONE-1023 470 ZONE-1024 470 ZONE-1026 470 Fabric OS Message Reference xli 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 42
-3004 480 AUTH-3005 480 AUTH-3006 480 AUTH-3007 481 AUTH-3008 481 AUDIT CONF System Messages CONF-1000 483 CONF-1020 483 xlii Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 43
495 SEC-3021 495 SEC-3022 496 SEC-3023 496 SEC-3024 496 SEC-3025 497 SEC-3026 497 SEC-3027 497 SEC-3028 497 Fabric OS Message Reference xliii 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 44
SULB-1003 507 SULB-1004 508 SULB-1009 508 SULB-1010 514 SULB-1017 514 SULB-1018 514 SULB-1020 515 SULB-1021 515 xliv Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 45
523 ZONE-3018 524 ZONE-3019 524 ZONE-3020 524 ZONE-3021 524 ZONE-3022 525 ZONE-3023 525 ZONE-3024 525 ZONE-3025 525 Fabric OS Message Reference xlv 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 46
xlvi Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 47
and scenarios is beyond the scope of this document. The following hardware platforms are supported by this release of Fabric OS: • Brocade 200E, 4012, 4016, 4018, 4020, 4024 switches • Brocade 3250 switch • Brocade 3850 switch • Brocade 3900 switch Fabric OS Message Reference xlvii 53-1000640-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 48
4100, 4900, 5000, 7500, AP 7600 switches • Brocade 24000 director • Brocade 48000 director • FA4-16 blade • FC10-6 blade What's new in this document The following changes have been made -text formatting conventions that are used are as follows: xlviii Fabric OS Message Reference 53-1000640-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 49
or situations. Key terms For definitions specific to Brocade and Fibre Channel, see the Brocade Glossary. For definitions of SAN-specific terms, visit the Storage Networking Industry Association online dictionary at: http://www.snia.org/education/dictionary Fabric OS Message Reference xlix 53 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 50
www.t11.org For information about the Fibre Channel industry, visit the Fibre Channel Industry Association Web site: http://www.fibrechannel.org Getting technical help Contact your switch support supplier for hardware, firmware, and software support, including product repairs and part ordering. To - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 51
description of the problem, including the switch or fabric behavior immediately following the problem, and specific questions • Description of any troubleshooting steps already performed and the results • Serial console and Telnet session logs • syslog message logs 2. Switch Serial Number The - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 52
lii Fabric OS Message Reference 53-1000640-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 53
Introduction To System Messages 1 This guide supports Fabric OS v6.1.0 and documents system messages that can help you diagnose and fix problems with a switch or fabric. The messages are organized first by event type, reliability, availability, and serviceability log (RASLog) or AUDIT, and - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 54
is persistent across power cycles and switch reboots. • By default, the errDump support post-event audits and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware downloads, and certain types of fabric events. Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 55
. For information on configuring syslogd functionality, refer to the Fabric OS Administrator's Guide. System Console The system console displays messages only through the serial port. If you log in to a switch through the Ethernet port or modem port, you will not receive system console messages - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 56
log and syslog (if enabled). Port Logs The Fabric OS maintains an internal log of all port activity. Each switch or logical switch maintains a log file for each port. Port logs are circular buffers that can save up to 8000 entries per logical switch. When the log is full, the newest log entries - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 57
the SNMP recipients to default values. agtCfgSet Modifies the Enables an event to report to the port log. Port log events are described by the portLogEventShow command. setVerbose Sets the verbose level of a particular module within the Fabric OS. supportFtp Sets, clears, or displays support - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 58
System Parameters and Logs (Continued) Command Description supportFfdc Enables and disables FFDC (first failure data capture). supportSave commands. This output is used by your switch service provider to diagnose and correct problems with the switch. The output from this command is very - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 59
27: Port media incompatible e. Reason: Configured port speed. Type to continue, Q to stop: Clearing the System Message Log To clear the system message log for a particular switch instance: 1. Log in to the switch as admin. 2. Use the errClear command to clear all messages from memory. NOTE - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 60
was generated on the switch. The RASLog subsystem supports an internationalized timestamp format base on the "LOCAL" setting. The message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual. Note that not all - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 61
persistent across power cycles and switch reboots. switch name. The defined switch name or the chassis name of the switch. This value is truncated if it exceeds 16 Switch name>, , The following is a sample audit event message: Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 62
RASLog subsystem will support an internationalized timestamp format base on the "LOCAL" setting. Message Module and Message Number The message module and number. These values uniquely identify each message in the Fabric OS and reference the cause and actions recommended in this manual. Note that - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 63
for troubleshooting. For all cases, you should look at each specific error fabric port. Responding to a System Message This section provides procedures on gathering information on system messages, including: •Looking Up a System Message 11 •Gathering Information About the Problem 12 •Support - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 64
occur? 9. Was security enabled? 10. Was POST enabled? 11. Are serial port (console) logs available? 12. Which CP was master? (only applicable to the Brocade DCX, 12000, 24000, or 48000) 13. What and when were the last actions or changes made to the system? Support Fabric OS creates a number of - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 65
using fewer physical ports. Access Gateway mode transforms the Brocade 200E as well as embedded switches into a device management tool that is compatible with different types of fabrics, including Brocade-, Cisco-, and McDATA-based fabrics. Authentication error messages indicate problems with the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 66
the domain and alias lists to all switches in the fabric. Fabric OS system driver module. Firmware blade compatibility errors with control processor (CP). Fibre Channel over IP port configuration messages. Fibre Channel miscellaneous messages relate to problems with the physical layer used to send - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 67
. Moreover, ICPD distributes iSCSI configurations not only switch wide, but also fabric wide. It keeps track iSCSI VT status and updates VT status to BP. System messages generated by the IP admin demon. Fibre Channel over IP license, tunneling, and port-related messages. The ISCS module is the FabOS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 68
EVM daemon (evmd) • Exchange Service Support daemon (essd) • FA-API rpc daemon (rpcd) • Fabric daemon (fabricd) • Fabric Watch daemon (fwd) • FCPD port links. This database is used to route frames. MS-FICON messages relate to Fibre Connection (FICON) installations. Fibre Connection control unit port - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 69
TABLE 5 System Module MS NBFS NS PDM PDTR PLAT PORT PS PSWP RAS RCS RPCD RTWR SAS SCN SEC System Module Descriptions (Continued) Description The Management Service enables the user to obtain information about the Fibre Channel fabric topology and attributes by providing a single management access - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 70
informational only and are generated even during successful firmware download. For additional information, refer to the Fabric OS Administrator's Guide. These messages are generated by the switch driver module that manages a Fibre Channel switch instance. System controller is a daemon that starts up - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 71
RASLog Messages Section I This section provides the RASLog messages, including: •AG System Messages 23 •AUTH System Messages 31 •BKSW System Messages 45 •BL System Messages 47 •BLL System Messages 61 •BM System Messages 63 •C2 System Messages 69 •CDR System Messages 71 •CER System Messages - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 72
Messages 321 •NBFS System Messages 327 •NS System Messages 329 •PDM System Messages 331 •PDTR System Messages 339 •PLAT System Messages 341 •PORT System Messages 343 •PS System Messages 345 •PSWP System Messages 347 •RAS System Messages 349 •RCS System Messages 353 •RPCD System Messages - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 73
DRAFT: BROCADE CONFIDENTIAL •TRCK System Messages 451 •TS System Messages 453 •UCST System Messages 457 •UPTH System Messages 459 •WEBD System Messages 461 •ZOLB System Messages 463 •ZONE System Messages 465 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 74
- HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 75
Fabric OS Command Reference manual for more information on this command. • Some blades and ports in a switch may not support NPIV. NPIV functionality cannot be enabled on such ports and they will not respond to NPIV requests. Refer to the Access Gateway Administrator Guide, Appendix B for specific - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 76
fabric login (FLOGI) request from the fabric for N_Port . Probable Cause Indicates that the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the specified N_Port. Recommended Action Please check the configuration of the fabric switch has been enabled or disabled. - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 77
run the supportSave command and contact your switch service provider. Severity WARNING AG-1009 Message , [AG-1009], ,, WARNING, , Sending FLOGI failed on N_Port . Probable Cause Failure sending Fabric Login (FLOGI) request from the Access Gateway - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 78
-name>, Sending FDISC failed on N_Port . Probable Cause Indicates failure of sending the discover F_Port service parameter request from the Access Gateway to the fabric switch. Recommended Action Please check the configuration of the fabric switch connected to the Access Gateway. If the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 79
then run the supportsave command and contact your switch service provider. Severity WARNING AG-1016 Message < port should not be connected to port , which is configured as N_Port. Indicates that Initiator/Target is erroneously connected to a port configured for N_Port operation. Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 80
>,, WARNING, , Unable to do Preferred-Failover of F_Port . Failover across different fabric is not supported. Probable Cause Failover across N_Ports connected to different fabrics is not supported. Recommended Action Please change the preferred N_Port settings for this F_Port - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 81
the attached F_Ports on edge switch is the same. Recommended Please run the porttrunkarea --show command on the attached switch to display that the TA is Action assigned to all ports in the system and run porttrunkarea --enable to reconfigure the TA. Severity ERROR Fabric OS Message Reference 29 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 82
contact your switch service provider. Severity WARNING AG-1027 Message , [AG-1027], ,, WARNING, , Unable to handle this login request on port because NPIV capability is not enabled on this port. Probable Cause NPIV not enabled. Recommended Run - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 83
to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, ". Recommended No action is required. Action Severity INFO Fabric OS Message Reference 31 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 84
run the supportSave command and contact your switch service provider. Severity WARNING AUTH-1007 Message Probable Cause , [AUTH-1007], ,, ERROR, , The proposed authentication protocol(s) are not supported: port . Indicates that the proposed - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 85
switch supports the specified protocols: Fibre channel problem with the Secure Fabric OS. Recommended Action Reboot or power cycle the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 86
and contact your switch service provider. Severity WARNING AUTH-1014 Message , [AUTH-1014], , FFDC, ERROR, , Invalid port value to : port . Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 87
and contact your switch service provider. Severity ERROR AUTH-1018 Message , [AUTH-1018], ,, ERROR, , Invalid value to check protocol type: port . Probable Cause Indicates an internal problem with the Secure Fabric OS. Recommended Action - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 88
on authentication type: • Some operations for switch link authentication protocol (SLAP): certificate retrieve, certificate verification signature verification, or nonce signing. • Some operations for fibre channel authentication protocol (FCAP): certificate retrieve, certificate verification - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 89
the specified authentication phase. This indicates that the local switch does not support the specified authentication value. Recommended Check the authentication configuration and reset the supported value if needed using the authUtil Action command. Fabric OS Message Reference 37 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 90
; then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1030 Message , [AUTH-1030], ,, ERROR, , Invalid message code for message: port . 38 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 91
run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1033 Message , [AUTH-1033], ,, ERROR, , Disable port due to unauthorized switch . Fabric OS Message Reference 39 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 92
that the switch received an unexpected authentication message. Recommended Action Usually this problem is transient. The authentication might fail. Reinitialize authentication using the portDisable and portEnable commands or the switchDisable and switchEnable commands. 40 Fabric OS Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 93
policy: Port disabled. Indicates that the neighboring switch has a conflicting authentication policy enabled. The_E-Port has been disabled, because the neighboring switch rejected the authentication negotiation, and the local switch has a strict switch authentication policy. Fabric OS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 94
will form without authentication. Recommended Action If there is no light on the port, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch using the portEnable command. If the E_Port formed, no action is - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 95
then run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1043 Message < authentication will be defaulted to OFF, and switch will not participate enable the port using the portEnable command. Action Severity ERROR Fabric OS Message Reference 43 53- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 96
3 AUTH-1044 44 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 97
the end of the error message for specific information. The switch will reboot (on single-CP switches) or failover (on dual-CP switches). The warning message might be any one file information, and contact your switch service provider. Severity WARNING Fabric OS Message Reference 45 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 98
4 BKSW-1003 46 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 99
hardware problems. Note that any reference seen to slot 0 is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 contain FR4-18i and FA4-18 blades respectively. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 100
cycle the blade. Run the systemVerification command to verify that blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more information on these commands. If the message persists, replace - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 101
does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference for more blade has failed to initialize the application-specific integrated circuit (ASIC) chips. Fabric OS Message Reference 49 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 102
(SFP), or device attached to the specified port. Run the systemVerification command to verify that the blade or switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. On a bladed switch, run the slotPowerOff and slotPowerOn commands. On - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 103
or power cycle the switch. If the message persists, replace the blade or the nonbladed switch. Severity ERROR BL-1013 Message , [BL-1013], ,, ERROR, , bport port is faulted. status=0x Port will be re-enabled - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 104
a hardware error. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If there is a hardware error, if the slotPowerOff or slotPowerOn fails on the bladed switch or if errors are encountered again: • On the Brocade DCX, 24000, and 48000, replace the blade field-replaceable - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 105
have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command Reference ... Probable Cause Indicates that the slot has started initializing the ports. Recommended No action is required. Action Severity INFO BL-1018 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 106
application-specific integrated circuit (ASIC) chips. Recommended Action Reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 107
/FCIP Virtualization ports on the blade in slot will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all GigE/Fibre Channel over IP - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 108
switch and run the diagPost command to ensure Action Power-On Self-Test (POST) is enabled. If problem persists, replace switch. ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 109
/FC Fastwrite ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all the GigE/Fibre Channel over IP - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 110
the ports. Recommended Action Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If the message persists, replace the blade. Refer to the Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 111
-name>, Faulting chip in slot = , miniS = ,port = due to BE/BI port fault. Probable Cause Fault the chip and disable all the ports on that chip. Recommended No action is required. Action Severity CRITICAL Fabric OS Message Reference 59 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 112
5 BL-1037 60 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 113
parity error • 10 = EPI CMEM interrupt error • 11 = CMI interrupt error • 12 = Interrupt overrun • 13 = FDET interrupt • 14 = Interrupt suspended • 15 = Filter LISTD error • 16 = Unknown filter LIST error • 17 = Wait for LPC open state • 18 = Wait for Old port state • 19 = Wait for Open init state - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 114
6 BLL-1000 If the message persists, replace the blade. Severity CRITICAL 62 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 115
blade. Recommended Action The problem can be corrected by changing the firmware version on either the control processor ( firmware download is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware Fabric OS Message Reference 63 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 116
or reseat the affected blade. On the Brocade Action DCX, 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1006 the blade so that it will persistently enable the ports. Action Severity INFO 64 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 117
the affected blade. On the Brocade Action 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING resetting the port configuration and linkcost. Recommended The blade ports are cleared automatically. No action is required. Action Fabric OS Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 118
. On the Brocade Action DCX, 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING BM-1056 Message , [BM-1056], ,, INFO, , AP is not configured. Persistently disabling all ports on the switch. 66 Fabric OS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 119
under a different mode. Recommended Configure the switch to persistently enable all ports. Action Severity INFO BM-1058 Message , [BM-1058], ,, WARNING, , Download of AP firmware failed for the switch. Reissue firmwaredownload to recover. Probable Cause - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 120
7 BM-1058 68 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 121
the Fibre Channel cable is not faulty. Replace SFPs or cable if necessary. Severity ERROR C2-1002 Message , [C2-1002], ,, ERROR, , Port chip faulted due to an internal error. Probable Cause Internal error. All the ports on the blade/switch - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 122
present. Probable Cause Indicates that the switch does not have the QoS license added. Rate Limit is a licensed feature and requires QoS license. Recommended Add QoS license to the switch to enable the Rate Limit functionality. Action Severity ERROR 70 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 123
ports. Verify that the SFPs have not deteriorated and that the Fibre Channel specific integrated circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error occurs, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 124
error in the application specific integrated circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error occurs, reboot the system at the next maintenance window. If the problem Action persists, replace the blade. Severity ERROR 72 Fabric OS Message Reference 53 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 125
loaded on the standby CP. The standby CP does not support the Advanced Performance Tuning module when the fibre connectivity (FICON) Management Server is enabled. Recommended Action Run the firmwareDownload command to upgrade the firmware on the standby CP. You can also disable FMS on the active - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 126
10 CER-1001 74 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 127
Chapter CONF System Messages 11 CONF-1000 Message , [CONF-1000], the class of configuration parameters that were uploaded. If AD is enabled, the AD number is specified in the description. Recommended No action again. Severity INFO Fabric OS Message Reference 75 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 128
11 CONF-1021 CONF- switch to be disabled. Recommended Disable the switch and try to download configuration again. Action Severity INFO CONF-1030 Message , [CONF-1030], ,, WARNING, , Configuration database full Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 129
range of the switch. Refer to the hardware reference manual for the environmental temperature range of your switch. Run the fanShow faulted. Recommended Action On Brocade 24000 and 48000, try reseating the specified FRU. Reboot or power cycle the switch. Fabric OS Message Reference 77 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 130
and an optional number to identify the unit, slot, or port. The Brocade 3250 has one power supply and three fans, and the Brocade 3850 has two power supplies and four fans. Values for the individual fans and power supplies for these switches might display, but these parts cannot be replaced: the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 131
or the switch for nonbladed switches. Recommended Action There is most likely a voltage hardware problem on the blade or motherboard of the switch. For the Brocade DCX, 24000 -number>, FFDC, CRITICAL, , powered down unexpectedly. Fabric OS Message Reference 79 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 132
specific failed target state is displayed in the message. There are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Action On Brocade DCX, 24000 and 48000, try reseating the indicated field-replaceable unit (FRU). If the message persists, reboot or power - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 133
manufacturer (OEM) data in the memory on a field-replaceable unit (FRU problem was discovered when performing consistency checks during a warm boot. Recommended Monitor the switch. If the problem persists, a reBoot or power cycle is required to resolve the Action problem. Severity WARNING Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 134
command and contact your switch service provider. Severity WARNING EM supported by the firmware on the standby control processor (CP). This is true even if the standby comes up and appears to be operational. High availability (HA) synchronization of the CPs will not be allowed. 82 Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 135
with the chassisConfig command, or upgrade the Action firmware on the standby to the version running on problem. The FRU ID value is composed of a FRU type string and an optional number to identify the unit, slot, or port. Recommended Action If the message persists, reboot or power cycle the switch - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 136
, or completely screw in the upper thumbscrew for the FC4-48 port blade) if the field-replaceable unit (FRU) is intended for use. Refer to the appropriate hardware manual for instructions on inserting the switch blades. Severity ERROR EM-1033 Message , [EM-1033], - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 137
card, then default WWN and IP addresses are used for the switch. Recommended Action Reseat the FRU card. If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS Command Reference - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 138
Recommended If the message is isolated, monitor the error messages on the switch. If the message is associated Action with other messages, follow the recommended -number>,, WARNING, , Can't power on , its logical switch is shut down 86 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 139
be powered on because the associated logical switch is shut down. Recommended Run the switchStart command on the associated logical switch. power), a newly inserted port blade was not powered on because there was not enough power available. Recommended The Brocade 24000 requires only a single power - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 140
become available again. Recommended The EM-1029 error can be a transitory error; if the problem resolves, the EM-1048 message is Action displayed. Severity INFO EM-1049 Message , >, : Inconsistency detected, FRU re-initialized. 88 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 141
media can be run at the configured port speed. If the port media is extended long wavelength, move it to a port that can support the heat generated. Severity WARNING EM errors, such as an application-specific integrated circuit.(ASIC) parity. error. Fabric OS Message Reference 89 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 142
specific integrated circuit.(ASIC) parity. error. Recommended Action No action is required if the switch does not reach the reset threshold for the switch/blade. If the reset threshold is reached on the switch/blade, the switch is not supported by the Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 143
off (based on user configuration) upon receiving a HW ASIC ERROR, reason:. The blade is power off since a hardware (HW) application specific integrated circuit (ASIC) ERROR was detected, and the user has selected to power off the problem blade when such a condition occurred. Fabric OS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 144
The previously incompatible Fabric OS or Storage Application Services (SAS) firmware have been upgraded Switch for non-bladed systems. Recommended Action On bladed systems, try reseating the specified FRU. On nonbladed switches, reboot or power cycle the switch. If the problem persists: 92 Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 145
systemverification command to verify that the switch does not have hardware problems. Refer to theFabric OS Reference Manual for more information on this command. • On bladed systems, replace the specified FRU, otherwise replace the switch. Severity ERROR Fabric OS Message Reference 93 53-1000600 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 146
12 EM-2003 94 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 147
download, identify the downlevel switch or switches that do not support the Coordinated HotCode protocol, and upgrade the downlevel switches. Then, restart the firmware download on this switch. Note that upgrading a downlevel Brocade switch in a mixed interop fabric may still cause data traffic - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 148
by the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric has rejected the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected resume message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 149
id.> Probable Cause The event could not be sent to the remote proxy because the remote proxy switch cannot be reached through in-band. Recommended Please make sure that the specified remote domain is present in the fabric. Action Severity WARNING Fabric OS Message Reference 97 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 150
14 EVMD-1001 98 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 151
Cause Indicates that an internal link service (ILS) information unit of invalid size has been received. The neighbor switch has sent an invalid sized payload. Recommended Action Investigate the neighbor switch for problems. Run the errShow command on the neighbor switch to view the error log for - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 152
can happen if a port is about to go switch service provider. Severity WARNING FABR-1006 Message Probable Cause , [FABR-1006], ,, WARNING, , Node free error, caller: . Indicates that the Fabric OS is trying to free or deallocate memory - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 153
problem with the Fabric OS. Recommended Action In case of severe memory corruption, the system might recover by performing an automatic failover. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 154
message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 155
). Fibre connectivity (FICON) mode requires an insistent domain ID. If an RDI response has a different domain ID, then the port is disabled. Recommended Action Run the configShow command to view the fabric.ididmode. A 0 means the IDID mode is disabled; a 1 means it is enabled. Set the switch to - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 156
, , ficonMode is enabled. Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command. Recommended system-name>, Critical fabric size () exceeds supported configuration (). 104 Fabric OS Message Reference - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 157
limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1022 Message , [FABR-1022], , FFDC, CRITICAL, , Fabric size () exceeds supported configuration (). Fabric limit timer ( - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 158
the licensed limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1023 Message , [FABR-1023], ,, INFO, , Fabric size is within supported configuration (). Fabric limit timer () stopped at - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 159
Receiver-ready flow control mode. This is the Fibre Channel standard protocol, that uses R_RDY primitive for flow control. • DUAL_CR mode: Dual-credit flow control mode. In both of the previous modes, the buffer credits are fixed, based on the port configuration information. In this mode, the buffer - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 160
area that is not in use, or the user must disable Trunk Area. The user has to manually enable the port else the port remains disabled forever. Refer to the Admin Guide for more information. Severity INFO FABR-1035 Message , [FABR-1035], , INFO, , Slave - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 161
configuration incompatible with Trunk Area enabled port. Persistently disabling port . Probable Cause When the port attempts to go online, Switch finds the Trunk Area enabled with incompatible port configuration such as long distance, port mirror, fast write or EX_port - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 162
15 FABR-1039 110 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 163
has been detected by the software. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 164
an invalid value in an object's status field. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. 112 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 165
an unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message Probable Cause , [FABS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 166
transitioned to the requested state. This is usually an internal Fabric OS problem. Recommended Action Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR FABS-1013 Message , [FABS-1013], - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 167
FRU could not be enabled. This is usually an internal Fabric OS problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR Fabric OS Message Reference - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 168
16 FABS-1015 116 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 169
communicate. Recommended Action The problem can be corrected by changing the version of firmware on the CP or AP blades. The firmware version on the CP firmwareDownload is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 170
17 FBC-1001 118 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 171
, FFDC, ERROR, , of GE failed. Please retry the command. Data: inst= st= - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 172
18 FCIP-1001 120 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 173
is low on memory and failed to allocate new memory for an information unit (IU). Recommended A nonbladed switch will automatically reboot. For a bladed switch, the active CP blade will Action automatically fail over and the standby CP will become the active CP. Severity CRITICAL Fabric OS Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 174
19 FCMC-1001 122 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 175
a fibre channel protocol (FCP) switch probed devices on a loop port, and Brocade DCX, 4100, 4900, 5000, 7500, and AP 7600 do not support private loop devices. Refer to the switch vendor for a list of other port types that support private devices for inclusion into the fabric. Severity INFO Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 176
20 FCPD-1003 124 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 177
-number>, FFDC, CRITICAL, , : failed, out of memory condition Probable Cause Indicates that the switch is low on memory and failed to allocate new memory for a Fibre Channel driver instance. The function can only be " fc_create". This function creates - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 178
21 FCPH-1001 126 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 179
-number>,, INFO, , FC router proxy device in edge created at port . Probable Cause Indicates that a proxy device in the edge fabric has been imported at the specified port. Recommended No action is required. Action Severity INFO FCR-1002 Message , [FCR - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 180
,, INFO, , FC router LSAN zone device added at port . Probable Cause Indicates that a device is added to a logical storage area network (LSAN) zone in the edge fabric. Recommended No action is required. Action Severity INFO FCR-1007 Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 181
>,, INFO, , FC router LSAN zone enabled at port : . Probable Cause Indicates that a logical storage area network (LSAN) zone was enabled in the edge fabric attached to the specified port. The enabled LSAN zone configuration is listed. Recommended No action - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 182
, [FCR-1012], ,, INFO, , FC Router fabric build completed on port . Probable Cause Indicates that the fibre channel router has completed a fabric build at the specified port. Recommended No action is required. Action Severity INFO FCR-1013 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 183
resources including LSAN zone resources, LSAN device resources, and proxy device port resources. Use the fcrProxyDevShow command to view how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as zoneShow, zoneRemove - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 184
entries exhausted. Probable Cause Indicates that the number of port world-wide names (WWNs) in use exceeds the local port WWN resources. Recommended Action Limit the number of port WWNs required by limiting the remote edge fabric connectivity (which limits the number of translate domains). You - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 185
LSAN) defined in the edge fabric exceeds the local LSAN zone by limiting the remote edge fabric connectivity (which Action limits switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics attached to fabrics with highly - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 186
the switch is deployed in a very large MetaSAN environment with large number of logical storage area network (LSAN) devices and fabrics, or , , In slot port WWN pool 95 percent allocated. Probable Cause Indicates that the Port world-wide name (WWN) pool has rolled over - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 187
-1032 Message , [FCR-1032], ,, INFO, , Edge fabric enabled security on port in fabric . Probable Cause Indicates that Secure mode was turned on in the edge fabric. Recommended No action is required. Action Severity INFO FCR-1033 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 188
,, INFO, , LSAN zone enabled in the backbone fabric. Probable Cause Indicates that the specified logical storage area network (LSAN) zone was enabled in the backbone fabric. The enabled LSAN zone configuration is listed. Recommended No action is required - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 189
name>, zone limit: . Probable Cause Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the local switch's zone database limitations. Recommended Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 190
type was not set. Recommended Action Setting port credits failed. Execute the portEnable command. If the problem persists try rebooting the switch. If the message persists, collect switch information using the supportShow command, and contact your switch service provider. Severity ERROR FCR-1049 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 191
the portEnable and portDisable commands to enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message , [FCR-1053], ,, WARNING, , Port was disabled, . Probable - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 192
-to-edge routing is not needed. Otherwise replace the switch with Action one that supports backbone to edge routing. Severity INFO FCR-1057 Message switch. Run the appropriate configuration command to modify the switch or port parameters on the remote switch. Severity WARNING 140 Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 193
number>,, WARNING, , EX_Port() has an incompatible configuration setting. Probable Cause Indicates that virtual channel (VC) Link Init is enabled on the local switch and the remote switch is negotiating in R_RDY mode. The fabric might not form properly. Recommended Action - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 194
VEX_ports was exceeded. To enable the specified port, disable any other operational port then re-enable the port. Recommended No action is required. Action Severity INFO FCR-1063 Message , [FCR-1063], ,, INFO, , Fabric for switch with domain ID - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 195
zones and aliases, exceeded on port by entries; max entries: . Probable Cause Indicates that the total number of zone configurations created in the connected fabric exceeds the maximum number supported by the Fibre Channel. The limit includes both active - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 196
set to 1 (enabled). Note that the FC Routing service is disabled by the factory. Recommended No action is required. Action Severity INFO FCR-1070 Message , [FCR-1070], ,, INFO, , The FC Routing configuration is set to default. Probable Cause Indicates - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 197
has lower limit of LSAN Zones supported. Probable Cause Indicates that a switch in the backbone/edge that supports different limit of logical storage area network (LSAN) zones was detected. Recommended Action Use the fcrResourceShow command on all Fibre Channel Routers in the Meta-SAN - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 198
re-enable the port. Recommended Make sure to remain within the maximum of supported front domains. Action Severity ERROR FCR-1077 Message , [FCR-1077], ,, WARNING, , Port rejected fabric binding request/check from the M-Model switch; - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 199
the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended Action - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 200
the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended Action - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 201
switch that the FICON Channel is directly connected to. HP - Host Port number: This is a 1 byte hexidecimal value that represents the switch port of the switch that the FICON Channel specific to all Devices on a specific Control Unit. VEHDHPDDDPLP**** - indicates that the event or message is specific - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 202
Enabled or Disabled>. Probable Cause User changed the configuration manually. Recommended No action is required. Action Severity INFO FICN-1006 Message , [FICN-1006], ,, WARNING, , FICON GEPort < 0 or 1 - GE port Reset from the channel received as either - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 203
Data:Bytes0-0xB=0x. Probable Cause Unit Check status received from device and Channel. Recommended If there was a job or IO failure associated with this event, please contact your vendor's customer Action support Fabric OS Message Reference 151 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 204
suspended associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1012 Message , [FICN-1012 , please contact your vendor's customer support Action for assistance. Severity INFO 152 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 205
Probable Cause The FICON Control Unit sent a LPE frame to the FICON channel. Recommended This is an informational message and does not require any action Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR Fabric OS Message Reference 153 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 206
Last 4 status values received from the device>. Probable Cause The FICON channel indicated in the path issued a LRJ frame for a sequence from event, please contact your vendor's Action customer support for assistance. Severity ERROR FICN-1022 Message < Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 207
FICON channel issued 11>. Probable Cause The FICON tape write pipelining processed sense data from a FICON device. Recommended If there was an unexpected job failure or IO Error associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 208
please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1029 channel for this device> LastStatus=0x. An active disk emulation device received a Selective Reset from the FICON channel. 156 Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 209
or IO Error associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR FICN-1031 Message , [FICN-1031], - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 210
peer. This indicates that the channel side noted corruption from the device/CU side processing. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR -name>, HostIng:FICON ELP Request on Path=. 158 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 211
Data bytes 0-11>. Probable Cause An active disk emulation device received a FICON Purge Path from the channel. Recommended If there was an unexpected job failure or IO Error associated with this event, please contact your Action vendor's customer support for assistance. Severity ERROR Fabric OS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 212
channel for this device>. Probable Cause Protocol errors in emulation in the CU or network errors can cause Selective Reset. Recommended If this was an unexpected event, please contact your vendor's customer support started for this device> seconds. 160 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 213
FICON channel. This is performed during the path recovery. Recommended If this was an unexpected event, please contact your vendor's customer support for event, please contact your vendor's customer support for assistance. Action Severity ERROR Fabric OS Message Reference 161 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 214
processing index in the TIR data from the locally connected channel or control unit>. Probable Cause A TIR received from an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1051 Message Probable Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 215
event, please contact your vendor's customer support for assistance. Action Severity INFO FICN-1053 event, please contact your vendor's customer support for assistance. Action Severity INFO FICN , please contact your vendor's customer support for assistance. Action Severity WARNING FICN - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 216
If this was an unexpected event, please contact your vendor's customer support for assistance. Action Severity WARNING FICN-1056 Message , [FICN-1056 please contact your vendor's customer support for assistance. Action Severity ERROR 164 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 217
entry. Recommended This is an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1062 Message , [FICN-1062], your vendor's customer support for assistance. Action Severity ERROR Fabric OS Message Reference 165 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 218
for GEPort= VEport= could not create required structure. An internal resource limit has been encountered such that additional control block memory could not be allocated. 166 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 219
are already in use Action or there is an internal memory leak, please contact your vendor's customer support for assistance. Severity WARNING FICN-1067 Message , [FICN status=0x. Fabric OS Message Reference 167 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 220
customer support for channel for this device>:flags=0x. Probable Cause A Rewind and Unload IO has been processed from a locally connected LPAR, which indicates that a tape should be unloaded on a device. Recommended No action is required. Action Severity INFO 168 Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 221
of emulated read megabytes processed while this tape was loaded>. Probable Cause A Rewind and Unload IO has been processed from a locally connected LPAR and Read Channel Program pipelining was performed on the currently loaded tape. Recommended No action is required. Action Severity INFO - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 222
emulation states>:cmds=0x:status=0x:flags=0x. Recommended No action is required. Action Severity INFO 170 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 223
connected LPAR and Read Channel Program pipelining was performed Port Host> Port=0x. Probable Cause An attached port which had an FICON emulated path established has logged out from the switch. Recommended This may be an unexpected event, please contact your vendor's customer support - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 224
>,tunnel Id=. Probable Cause A FICON FCIP tunnel has been terminated to the peer switch. Recommended If this is an unexpected event, please contact your vendor's customer support for assistance. Action Severity ERROR 172 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 225
Management Server: Domain=, rc=. Probable Cause Indicates that the fibre connectivity control unit port (FICON-CUP) daemon failed to get the switch request node ID (RNID) from the management server due to a Fabric OS problem. The domain variable displays the domain ID of the target - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 226
Cause Indicates that the initialization of a module within the fibre connectivity control unit port (FICON-CUP) daemon failed. Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference for more information on this command - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 227
required to enable fibre connectivity (FICON) Management Server mode (fmsMode) were not available on some of the ports. Recommended Use the perfDelFilterMonitor command to delete the filter-based performance monitors used on all Action ports to free up the resources. Severity WARNING Fabric OS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 228
24 FICU-1010 FICU-1010 Message , [FICU-1010], ,, WARNING, , FMS Mode enable failed due to address conflict with port . Probable Cause Indicates that the fibre connectivity FICON Management Server mode (fmsMode) was not enabled because the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 229
overlap. This happens on a timed-out exchange; it automatically recovers after the application times the exchange out. Recommended No action is required. Action Severity WARNING Fabric OS Message Reference 177 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 230
25 FKLB-1001 178 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 231
, FFDC, WARNING, , Unknown LSR type: port , type Probable Cause Indicates that the link can support. Recommended Reduce the number of switches in the fabric or reduce the number of redundant ISLs between two Action switches. Severity - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 232
> Probable Cause Indicates that the transmit LSR contained an invalid domain number. Recommended No action is required; the LSR is discarded. Action Severity WARNING 180 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 233
Message , [FSPF-1001], ,, ERROR, , Input Port out of range Probable Cause Indicates that the specified input port number is out of range; it does not exist on the switch. Recommended No action is required. Action Severity ERROR FSPF-1002 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 234
other than 0 is incompatible in a fabric of Brocade switches. Disconnect the offending switch. Severity ERROR FSPF-1006 Message , [FSPF-1006], ,, ERROR, , FSPF Version not supported, input port = Probable Cause Indicates that - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 235
command if this is a dual-CP system, or reboot the switch if it is a nonbladed system. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Fabric OS Message Reference 183 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 236
the read system call to the Fabric OS state synchronization (FSS) device failed. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FSS-1006 Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 237
from the active CP within 5 seconds. This usually indicates a problem with the internal Ethernet connection and a disruption of the synchronization process haSyncStart command. If the problem persists, contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 185 53- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 238
28 FSS-1007 186 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 239
For more information on the haFailover command, refer to the Fabric OS Command Reference. Recommended No action is required. Action problem. If the problem persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 240
with current running version. This cause a disruptive firmware upgrade/downgrade. Recommended For a dual CP system, run the firmwareDownload command to load compatible firmware on the Action standby CP. For details on this command, refer to the Fabric OS Command Reference. Severity INFO 188 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 241
internal temperature of the switch has changed. Recommended Action temperature of the switch has fallen below the switch. Refer to the hardware reference manual for the environmental temperature range of your switch switch has risen above the high boundary to a value that might damage the switch - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 242
Indicates that the internal temperature of the switch has changed from a value outside of fan has changed. Fan problems typically contribute to temperature problems. Recommended Action No action is low boundary. Fan problems typically contribute to temperature problems. Recommended Consistently - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 243
to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 > . Indicates that the power supply is faulty. The power supply is not producing enough power. Fabric OS Message Reference 191 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 244
correctly and that it is correctly seated in the Action chassis. If the problem persists, replace the faulty power supply. Severity WARNING FW-1011 Message , [FW-1011], , Low=). Current value is . 192 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 245
Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has changed. The receive performance area this message occurs repeatedly, Action replace the SFP. Fabric OS Message Reference 193 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 246
>, Low=). Current value is . Probable Cause Indicates that the receive power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The receive of the Action end-user installation. Severity INFO 194 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 247
=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has fallen below the low boundary. The . Recommended Replace the SFP. Action Severity WARNING Fabric OS Message Reference 195 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 248
Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has changed from a value outside of =, Low=). Current value is . 196 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 249
threshold triggers an alarm when the value falls to 0 Action (Out_of_Range). If continuous or repeated alarms occur, replace the SFP before it deteriorates. Severity WARNING Fabric OS Message Reference 197 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 250
, [FW-1114], ,, INFO, , , is below low boundary(High=, Low=). Current value is . 198 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 251
-name>, , value has changed(High=, Low=). Current value is . Indicates that the number of fabric reconfigurations has changed. The following actions can cause a fabric reconfiguration: • two switches with the same domain ID have connected to one another - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 252
not become faulty. An inexplicable fabric reconfiguration might be a transient error and might not require troubleshooting. Severity INFO FW-1118 of fabric reconfigurations has fallen below the low boundary. The following occurrences can cause a fabric reconfiguration: • Two switches with - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 253
of domain ID changes has changed. Domain ID changes occur when there is a conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 254
conflict of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 255
of the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. A low number of segmentation errors means that the fabric is functioning normally. Recommended No action - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 256
the principal link between two switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely configuration. A low number of zone configuration changes means that the fabric is functioning normally. Recommended No action is required. Respond to this - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 257
Low value>). Current value is . Probable Cause Indicates that the number of fabric logins has changed. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 258
logins has changed from a value outside of the acceptable range to a value within the acceptable range. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 259
changes means that the switch is functioning normally. , , , value problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 260
physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. A low number of link loss errors means that the switch is functioning normally - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 261
. If you continue to experience synchronization loss errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity INFO FW-1165 Message , [FW-1165], ,, INFO, , , , is below low boundary(High= - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 262
you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, , , , is between high and low boundaries - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 263
the switch is functioning normally. Severity INFO FW-1170 Message , [FW-1170], ,, WARNING, , - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 264
that the port experiences has fallen problems. A low number of protocol errors means that the switch that the port experiences has to hardware problems. Recommended INFO, , , , is between errors that the port experiences has changed to hardware problems. Recommended - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 265
that the number of invalid words that the port experiences has changed. Invalid words usually indicate a hardware problem with an small form-factor pluggable (SFP a hardware problem with an small form-factor pluggable (SFP) or cable. A low number of invalid words means that the switch is functioning - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 266
port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Invalid words usually indicate a hardware problem . Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your small form-factor pluggables (SFPs), cables, - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 267
installation. Frequent fluctuations in CRC errors generally indicate an aging fabric. Check your small form-factor pluggables (SFPs), cables, >. Probable Cause Indicates that the percentage of incoming traffic that the port experiences has changed. Recommended No action is required. Respond to this - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 268
traffic that the port experiences has risen INFO, , , , is between traffic that the port experiences has changed INFO, , , , value outgoing traffic that the port experiences has changed. INFO, , , , is below - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 269
system-name>, , , , , the port experiences system-name>, , - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 270
port experiences has fallen below the low boundary. The state of the port has changed for one of the following reasons: the port port. A low number of port state changes means that the switch trunk port. - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 271
errors in Fibre Channel frames for specific source large numbers of messages indicate a problem in this area. Severity INFO errors in Fibre Channel frames for specific source problem in this area. A low level of invalid CRC errors means that the switch in Fibre Channel frames for specific source - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 272
Only five-figure (or higher) values for CRC errors indicate problems. When an "above" message is received, check for a messages occur when the number of CRC errors in Fibre Channel frames for specific source ID (S_ID) and destination ID (D_ID . 220 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 273
of the End-to-End Performance Monitor class helps you tune your fabric. To reduce CRC messages, experiment with alternative topologies and cabling Invalid CRC messages occur when the number of CRC errors in Fibre Channel frames for specific source ID (S_ID) and destination ID (D_ID) pairs change. - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 274
word frames that the switch receives has changed. to-end (EE) word frames that the switch receives has fallen below the low boundary. to-end (EE) word frames that the switch receives has risen above the high boundary. to-end (EE) word frames that the switch receives has changed from a value outside of - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 275
Unit>. Probable Cause Indicates that the number of end-to-end (EE) word frames that the switch transmits has changed. Transmit performance messages appear due to the number of word frames that travel the Action end-user installation. Severity INFO Fabric OS Message Reference 223 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 276
of end-to-end (EE) word frames that the switch transmits has changed from a value outside of the acceptable range the number of frame types or commands that the port receives has changed. The port has received small computer system interface (SCSI) >. 224 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 277
the number of frame types or commands that the port receives has risen above the high boundary. The port has received a small computer system interface (SCSI) that are authorized to establish Telnet connections to switches in the fabric. Recommended Action Run the errShow command to determine - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 278
IP address. The TELNET_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish Telnet connections to switches in the fabric. Recommended No action is required. Action Severity INFO FW-1300 Message , [FW-1300], ,, INFO, - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 279
IP address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish browser connections to the switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 280
address. The HTTP_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish browser connections to the switches in the fabric. Recommended No action is required. Action Severity INFO FW-1304 Message , [FW-1304], ,, INFO, - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 281
network management protocol policy (SNMP_POLICY) contains a list of internet protocol (IP) addresses that are authorized to establish API connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 282
protocol write (WSNMP) violations has changed. WSNMP violations indicate that an SNMP "get/set" operation request has been received from an unauthorized IP address. 230 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 283
range. WSNMP violations indicate that an SNMP "get/set" operation request has been received from an unauthorized IP address. Recommended No action is required. Action Fabric OS Message Reference 231 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 284
indicate that an small computer system interface (SCSI) Enclosure Services (SES) request has been received from an unauthorized WWN). The SES_POLICY contains a list of WWNs of device ports that are allowed to access the SES Server functionality. Recommended Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 285
small computer system interface (SCSI) Enclosure Services (SES) request has been received from contains a list of WWNs of device ports that are allowed to access the SES a list of WWNs of device ports that are allowed to access the Management of WWNs of device ports that are allowed to access the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 286
of serial violations has changed. Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port access is enabled. Recommended Action Run the errShow command to determine the WWN of - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 287
Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world-wide names (WWNs) for which serial port access is enabled. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 235 53-1000600 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 288
panel violations indicate that an unauthorized front panel request has been received. The FRONTPANEL_POLICY contains a list of switch world-wide names (WWNs) for which front panel access is enabled. Recommended Action Run the errShow command to determine the WWN of the device that sent the request - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 289
The FRONTPANEL_POLICY contains a list of switch world-wide names (WWNs) for which front panel access is enabled. Recommended No action is required switch tried to join the fabric. The SCC_POLICY contains a list of switches by world-wide name (WWN) that are allowed to be members of a fabric. - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 290
an unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI) request, the world-wide name - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 291
an unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI) request, the world-wide name - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 292
an unauthorized device tried to join the fabric. The DCC_POLICY allows for the specification of rules for binding device ports (typically host bus adaptor (HBA) ports) to specific switch ports. DCC policies ensure that whenever a device performs a fabric login (FLOGI) request that the world-wide - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 293
configuration server (FCS). When the primary FCS downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the difference is too great, it rejects the packet. This counter keeps track - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 294
been received from the primary world-wide name (WWN). When the primary fabric configuration server (FCS) downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the difference is too - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 295
-signature violations indicate that a packet with an invalid signature has been received from the primary fabric configuration server (FCS). When the FCS downloads a new configuration to the other switches in the fabric, the packet is signed using the private key of the primary FCS. The receiving - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 296
invalid certificate has been received from the primary fabric configuration server (FCS). Before a new primary FCS switch sends any configuration data to any switch in the fabric, it first sends its certificate to all the switches in the fabric. The receiving switch has to verify that the sender is - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 297
invalid certificate has been received from the primary fabric configuration server (FCS). Before a new primary FCS switch sends any configuration data to any switch in the fabric, it first sends its certificate to all the switches in the fabric. The receiving switch has to verify that the sender is - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 298
the low boundary. Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 299
many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails . Recommended No action is required. Action Severity INFO Fabric OS Message Reference 247 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 300
Value> . Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has risen above Unit>. Probable Cause Indicates that the number of time service (TS) out-of-sync violations has changed. > . 248 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 301
Cause Indicates that the number of time service (TS) out-of-sync violations has changed switch loses contact with the primary fabric configuration server (FCS) fabric configuration server (FCS) switch. When the primary FCS switch in the fabric sends its certificate to a switch, the receiving switch - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 302
has fallen below the low boundary. This counter records how often the switch loses contact with the primary fabric configuration server (FCS) switch. When the primary FCS switch in the fabric sends its certificate to a switch, the receiving switch saves the world-wide name (WWN) of that primary FCS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 303
a value within the acceptable range. This counter records how often the switch loses contact with the primary fabric configuration server (FCS) switch. When the primary FCS switch in the fabric sends its certificate to a switch, the receiving switch saves the world-wide name WWN of that primary FCS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 304
. This counter tracks how many times commands allowed only on the primary fabric configuration server (FCS) switch have been executed on a non-primary FCS switch. There are many commands that can be executed only on the primary FCS switch as well as one security command that can be executed only on - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 305
. This counter tracks how many times commands allowed only on the primary fabric configuration server (FCS) switch have been executed on a non-primary FCS switch. There are many commands that can be executed only on the primary FCS switch as well as one security command that can be executed only on - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 306
operation of the switch. Excessive permanent increases can lead to future problems. Recommended No operation of the switch. Excessive permanent increases can lead to future problems. Recommended No operation of the switch. Excessive permanent increases can lead to future problems. Recommended You - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 307
operation of the switch. Excessive permanent increases can lead to future problems. Recommended No switch status is not in a healthy state. This occurred because the number of faulty or missing power supplies is greater than or equal to the policy set by the switchStatusPolicySet command. Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 308
that the switch status is not in a healthy state. This occurred because the power supplies are not in the correct slots for redundancy. Recommended Rearrange the power supplies so that one is in an odd slot and other in an even slot to make them Action redundant. Severity WARNING 256 Fabric OS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 309
the switchStatusPolicySet command. Recommended Replace the faulty WWN card. Action Severity WARNING FW-1433 Message , [FW-1433], ,, WARNING, , Switch status change contributing factor CP: CP non-redundant. Fabric OS Message Reference 257 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 310
level of firmware to both CPs. Replace any faulty CPs. If you reset the micro-switch (the latch on the CP blade) on the active CP before the heartbeat was up on a power cycle, and the CPs came up non-redundant, then you should reboot the CPs again to clear the problem. Severity WARNING - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 311
ports. Severity WARNING FW-1439 Message Probable Cause , [FW-1439], ,, WARNING, , Switch status change contributing factor Switch offline. Indicates that the switch status is not in a healthy state. This occurred because the switch is offline. Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 312
unit (FRU) has changed to "inserted". This means that an FRU is inserted but not powered on. Recommended No action is required. Verify that the event was planned. Action Severity INFO FW the specified field-replaceable unit (FRU) changed to "off". 260 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 313
been present are: 2 out of service indicates switch status is DOWN, 1 out of service indicates switch status is MARGINAL Recommended Action To maintain full (2X) redundancy and proper monitoring by Fabric Watch, 4 active power supplies should be supplied and the default values associated with the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 314
occur due to software glitches. Persistent errors occur due to hardware problems. Recommended Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then enable the Action port using the portEnable command. Severity INFO 262 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 315
HAM) Health Monitor, with a specific device and Log="YES" Class reseating it. If the problem persists, replace the standby switch processor reboot reasons that were initiated by the user or the switch errors. The switch memory errors. The reboot reasons can be any of the following: • Hafailover Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 316
that the local EMAC controller on the active control processor (CP) is BAD as determined by the diagnostic test run by the ham module. 264 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 317
31 HAM-1006 Recommended The standby CP will take over and reset the active CP.The system will be non-redundant as the Action standby becomes the active CP. Severity CRITICAL Fabric OS Message Reference 265 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 318
31 HAM-1006 266 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 319
to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL HAMK-1002 Message , [HAMK-1002], ,, that the standby CP is healthy. Action Severity INFO Fabric OS Message Reference 267 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 320
reset and reboot twice in a row. A CP can recover automatically even if it has rebooted twice. Recommended No action is required. Action Severity INFO 268 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 321
blade or switch (for nonbladed switches). Action power supply status. Try to reseat the faulty fan field-replaceable unit (FRU) and power supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power supply FRU as necessary. Severity ERROR Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 322
units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100, 4900, 5000, 7500, and AP7600, if the 12 volt level is faulty, replace one or both power supplies; if any other voltage is faulty, replace the entire switch. Severity ERROR 270 Fabric OS Message Reference 53 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 323
threshold. System preparing for reset. Probable Cause Indicates that the switch voltage is below threshold. This message is specific to nonbladed switches and is not applicable to the Brocade 24000, or 48000. Recommended Action For the Brocade 200E, 3250, 3850, 4012, 4016, 4018, 4020, and 4024 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 324
temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Run message is specific to nonbladed switches and is not applicable to the Brocade 24000, or 48000. Recommended Action For the Brocade 3900 replace - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 325
problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade 24000, or 48000. Recommended For the Brocade operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 326
. This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately. Action Severity WARNING Recommended Replace the faulty fan FRUs immediately. Action 274 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 327
-name>, All fans failed. Replace failed fan FRUs immediately. Indicates that all fans have failed. This message is often preceded by a low fan speed message. Fabric OS Message Reference 275 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 328
Since the fans are not field replaceable, replace the switch if the temperature is high. Action Severity WARNING HIL Recommended Action This can only occur on switches with non-removable fans. It follows faulty and non-faulty behavior. Replace the switch because the fan is not field-replaceable. - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 329
], ,, WARNING, , Slot , high temperature (). Indicates that the temperature of this blade has risen above the warning threshold. Fabric OS Message Reference 277 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 330
manual for your switch for the operational temperature range. If the message persists, replace the faulty blade. Severity CRITICAL HIL-1504 Message Probable Cause , [HIL-1504], ,, INFO, , System within normal temperature specifications ( - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 331
problems, make sure that all the fans are working properly. Make sure that the area is well ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Severity CRITICAL Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 332
the system can continue operation. Recommended Action To help prevent future problems, make sure that all the fans are working properly. Make sure of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. Severity WARNING 280 Fabric OS Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 333
> fans out of service. System is shutting down immediately. Probable Cause Indicates that total fan failure count is greater than or equal to two. Recommended In order to avoid causing damage to the switch, the system shuts down automatically. To help Action prevent future problems, make sure that - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 334
33 HIL-1650 Severity ERROR 282 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 335
-name>, Invalid Hello received from port , Domain = , Remote Port =. Indicates that the HLO message received was invalid and the frame was dropped. The Brocade switch will not accept FSPF frames from the remote switch. Fabric OS Message Reference 283 53 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 336
an invalid HLO because either the domain or port number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 337
the firmwareDownload command to reinstall the firmware to your switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric OS Message Reference 285 53-1000600 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 338
35 HMON-1001 286 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 339
INFO, , Switch PIDformat has changed to . Probable Cause Indicates that the PID format was changed by the administrator. Recommended No action is required. For more information on PID, format refer to the Fabric OS Administrator's Action Guide. Severity INFO HTTP - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 340
36 HTTP-1003 288 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 341
port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and power on the blade using the slotPowerOff and slotPowerOn commands. On the Action Brocade 7500 or 7600, switch off and on all primary power in order to power-cycle the unit. Severity WARNING Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 342
37 IBD-1001 290 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 343
>, iSCSI login sessions exceed the maximum limit at slot port ge Probable Cause Indicates that the iSCSI login sessions exceed the supported limit per port. Recommended Use another port to login. Action Severity WARNING Fabric OS Message Reference 291 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 344
38 IBPD-1003 292 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 345
allocate memory. Recommended Action Check memory usage on the switch using the memShow command. Reboot or power cycle the switch. Severity Client service is detected on multiple switches in fabric. Indicates that iSNS Client service is enabled on multiple switches in fabric. Fabric OS Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 346
39 ICPD-1005 Recommended Enable the iSNS Client service on a single switch in the fabric using the fosConfig command. Refer Action to the Fabric OS Command Reference for more information on this command. Severity WARNING ICPD-1005 Message , [ICPD-1005], ,, WARNING, < - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 347
Recommended No action is required. Action Severity INFO 39 ICPD-1008 Fabric OS Message Reference 295 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 348
39 ICPD-1008 296 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 349
Chapter IPAD System Messages 40 IPAD-1000 Message , [IPAD- prefix> Probable Cause Indicates that a change in local IP address has occurred. If the source of the address change is manual, this means Severity INFO Fabric OS Message Reference 297 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 350
40 IPAD-1001 DRAFT: BROCADE CONFIDENTIAL 298 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 351
the supportSave command and contact your switch service provider. Severity WARNING IPS-1004 Message , [IPS-1004], ,, WARNING, , Port Config Mode Mismatch slot () port(ge): current mode is () Fabric OS Message Reference 299 53 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 352
,, WARNING, , Tunnel Authorization Failure for slot () port(ge) tunnel ID() reason () Probable Cause Indicates that tunnel setup other side to setup Action tunnel. Severity WARNING 300 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 353
-number>,, ERROR, , Slot Port GE crashed unexpectedly. Probable Cause Indicates that specified port has crashed. Recommended No action is required; the port will restart automatically. Action Severity ERROR Fabric OS Message Reference 301 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 354
42 ISCS-1000 302 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 355
/port /ge (current /ge - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 356
iSNS server IP address> slot/port /ge. Probable Cause Indicates that the re-register with the specified external internet storage name service (iSNS) server has started server was already started with the same configuration. 304 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 357
. Refer to the appropriate hardware reference manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message , [ISNS-1011], ,, INFO, , iSNS Client Service is . Probable Cause Indicates the current - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 358
server on management port. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) on the management port. Recommended No action is required. Action Severity INFO 306 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 359
the end of the error message for specific information. The switch will reboot (on single-CP switches) or failover (on dual-CP switches). The warning message will be any one file information, and contact your switch service provider. Severity WARNING Fabric OS Message Reference 307 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 360
44 KSWD-1003 308 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 361
1001], ,, WARNING, , Dump memory size exceeds dump file size Probable Cause Indicates that the dump memory size has exceeded the dump file size. Recommended No the write boundry in the ATA dump device has been exceeded. Fabric OS Message Reference 309 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 362
failed. . . Probable Cause Indicates that Trace was unable to initialize. Recommended No action is required. Action Severity ERROR 310 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 363
reboot command for nonbladed switches or the haFailover command on bladed switches. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 311 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 364
>, The log has been cleared. Probable Cause Indicates that the persistent error log has been cleared. Recommended No action is required. Action Severity INFO 312 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 365
range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity switch generates its local link state record when first enabled. By disabling and enabling the switch, a new local link state record is generated. Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 366
. A new local link state record is generated Action during the switch enable. Severity CRITICAL LSDB-1004 Message , [LSDB-1004], - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 367
possible values for state are "On" or "Off". Recommended Action IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is for information purposes only, and no - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 368
1003 IDID mode can be set using the configure command in the CLI or checking the Advanced Web Tools Switch Admin > Configure Tab > Fabric Subtab > Insistent Domain ID Mode checkbox. The switch must be disabled to change the IDID mode. Severity WARNING 316 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 369
FSPF module has determined that there is no minimum cost path (MPath) available in the candidate list. Recommended No action is required. Action Severity WARNING Fabric OS Message Reference 317 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 370
49 MPTH-1003 318 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 371
• 7 - MSG_LINIT_IU • 8 - MSG_RSCN • 9 - MSG_IOCTL • 10 - MSG_ACCEPT • 11 - MSG_IU_FREE • 12 - MSG_US • 13 - MSG_EXT_RSCN • 14 - MSG_RDTS_START • 15 - MSG_RDTS_SENDEFP • 16 - MSG_RDTS_RESET Recommended No action is required. Action Severity ERROR Fabric OS Message Reference 319 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 372
50 MQ-1004 320 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 373
. Recommended Action: Set the flag for the MS Platform Service. • The GCAP (MS Get Capabilities) is not supported by another switch. Recommended Action: Upgrade the firmware level on the switch to a level that supports RCS. • The request to the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 374
Run the firmwareDownload command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and greater, transfers; then run the supportSave command and contact your switch service provider. Severity INFO MS-1004 Message , [MS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 375
. MS expects either a CT accept IU or a reject IU; MS received neither response, which violates the Fibre Channel Generic Services (FS-GS) specification. Recommended Check the integrity of the FC switch at the specified domain. It is not sending correct MS Action information as defined by the FC-FS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 376
event. Switch Port ID is . Device Port Tag is . to SAN hardware problems such Service Probable Cause Indicates that Management Server Platform Service is being activated or deactivated. Recommended No action is required. Action Severity INFO 324 Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 377
>, Management Server Topology Discovery Service Probable Cause Indicates that Management Server Topology Discovery Service is being enabled or disabled. Recommended No Recommended No action is required. Action Severity INFO Fabric OS Message Reference 325 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 378
51 MS-1024 326 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 379
two connected switches has problems. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is FULL, then this message can safely be ignored. Otherwise, run the portDisable and portEnable commands to refresh the port. Fabric OS Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 380
on the specified port. Neighbor finite state machine (NBFSM) states are as follows: • 0 - Down • 1 - Init • 2 - Database Exchange • 3 - Database Acknowledge Wait • 4 - Database Wait • 5 - Full Recommended No action is required. The Fabric OS auto recovers from this problem. Action Severity WARNING - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 381
switch with firmware v4.3 or higher, as appropriate for the switch type, so that it can support firmware versions running on the active and standby CPs. This means that the active and standby CPs are out of sync. Any execution of the haFailover or firmwareDownload commands will be disruptive. Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 382
of the lowest version of firmware. Severity INFO NS-1005 Message , [NS-1005], ,, WARNING, , Zone size of has over the supporting limit of for the remote switch domain ID . Probable Cause - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 383
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 331 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 384
data manager (PDM) process ran out of memory. Recommended Action Reboot or power cycle the switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1005 Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 385
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 333 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 386
. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1012 Message , [PDM - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 387
reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. length for the files to be replicated. Action Severity WARNING Fabric OS Message Reference 335 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 388
-number>,, WARNING, , DNS is configured for IPv6. Indicates that the parity data manager (PDM) cannot sync with its peer because the domain name service (DNS) is configured for IPv6. IPv6 is not supported by older firmware. 336 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 389
Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference 337 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 390
54 PDM-1024 338 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 391
a chip reset. • All other code values are reserved. Recommended Run the pdShow command to view the panic dump and core dump files. Action Severity INFO Fabric OS Message Reference 339 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 392
55 PDTR-1002 340 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 393
your switch service provider. specific>. Probable Cause Indicates that the CP cannot access the I2C subsystem either due to an error condtion or being fenced/isolated from the I2C bus. Recommended Reboot the CP if it does not reboot itself. Reseat the CP if rebooting does not solve the problem - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 394
, [PLAT-1003], , FFDC, CRITICAL, , Slot C/BE: ADBUS: misc_intr . Probable Cause Indicates that a PCI bus hang was detected. Recommended - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 395
This will free some buffers and allow this port to be enabled. Severity INFO PORT-1005 Message Probable Cause , [PORT-1005], ,, WARNING, , Slot port does not support configured L_port. Issue portCfgLport to clear configuration - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 396
57 PORT-1005 Recommended Invoke the portCfgLport to clear the L_port configuration. Action Severity WARNING 344 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 397
it does not, reboot or power cycle the switch to Action reinitiate the firmware. Severity CRITICAL PS-1001 Message No action is required. Refer to the Fabric OS Administrator's Guide for more information about the Action PID format ISL ports. Fabric OS Message Reference 345 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 398
to add end-to-end monitors on at least one ISL port. Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is Action enabled. ISL monitoring can only be disabled through the Fabric Access API. Severity WARNING PS-1005 Message , [PS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 399
name>, Port Swap feature enabled. Probable Cause Indicates that the portSwap feature has been enabled in the switch. Port Swap feature disabled. Probable Cause Indicates that the portSwap feature has been disabled in the switch. Recommended No action is required. Action Severity INFO Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 400
59 PSWP-1003 348 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 401
the supportSave command Action and contact your switch service provider. Severity INFO RAS-1002 Message the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1004 supportSave command and contact your switch service provider. Action Severity WARNING RAS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 402
internal software error. Recommended Run the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1006 Message , [RAS-1006], , INFO, , Support data file () automatically transferred to remote address - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 403
-number>, INFO, , USB storage device enabled. Probable Cause Indicates that the USB storage device is enabled. Recommended No action is required. Action Severity INFO device disabled. Indicates that the USB storage device is disabled. Fabric OS Message Reference 351 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 404
60 RAS-3004 Recommended No action is required. Action Severity INFO 352 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 405
the firmware for any switches that do not support RCS. Severity INFO RCS-1002 Message , [RCS-1002], ,, INFO, , RCS has been enabled. Probable Cause Indicates that the RCS feature has been enabled. RCS must be capable on all switches in the fabric to - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 406
. Run the rcsInfoShow command to view RCS capability on the fabric. RCS is supported in Fabric OS v2.6, v3.1 and greater, v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 407
ERROR, , Zone DB size and propogation overhead exceeds domain 's maximum supported Zone DB size . Retry after reducing the Zone DB size. Probable Reduce the zone database size. Action Severity ERROR Fabric OS Message Reference 355 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 408
61 RCS-1008 356 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 409
faulty credentials. Recommended Enter the correct user name and password from the Fabric Access API host. Action Severity WARNING RPCD-1002 SSL certificate is missing. Recommended To enable RPCD in Secure mode, install a valid SSL certificate on the switch. Action Severity WARNING RPCD-1003 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 410
the SSL certificate file has been corrupted. Recommended To enable RPCD in Secure mode, install a valid SSL certificate the switch. Action Severity WARNING RPCD-1005 Message , [ install a valid private key file. Action Severity WARNING 358 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 411
the error, and more specific error information. The values in Enable the switch with the specified domain ID. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 412
ID is reachable. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO 360 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 413
,, ERROR, , string description of command which failed> of GE failed. Please retry the command. Data inst= st= - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 414
64 SAS-1001 362 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 415
to a specific queue has failed because the SCN queue for the specified daemon name is full. This might switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 416
65 SCN-1001 364 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 417
be capable on all switches in the fabric to be enabled. If all switches are capable, RCS is automatically enabled. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 418
to 0 using the secVersionReset command and then rejoin the switch to the fabric. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING SEC-1005 Message , [SEC - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 419
unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the HTTP connection. Action Severity INFO SEC-1009 Message , [SEC-1009 of the unauthorized host is displayed in the message. Fabric OS Message Reference 367 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 420
database is too large for the flash memory. The size of the security database increases fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR 368 Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 421
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR Fabric OS Message Reference 369 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 422
specific switch. Severity ERROR SEC-1031 Message , [SEC-1031], ,, WARNING, , Current security policy DB cannot be supported the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 423
command supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch connection control (SCC) policy. Refer to the Fabric OS Command - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 424
list had an invalid format. Recommended Run the command again using the standard WWN format, 16 hexadecimal digits grouped as eight Action colon separated pairs. For example: 50:06:04: Recommended Use valid syntax when entering port members. Action 372 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 425
-name>, Too many port members. Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 426
. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. 374 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 427
Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR Fabric OS Message Reference 375 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 428
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1055 Message , [SEC-1055 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 429
fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch no domains or domains more than the maximum number supported are specified. Recommended Enter the correct number of - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 430
set up automatic FTP transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1071 Message , [SEC-1071], ,, secPolicyActivate command to activate the policies. 378 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 431
; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1073 Message , [SEC-1073], ,, ERROR, , No FCS policy in list! Probable Cause Indicates that the specific policy type is empty. The security database is - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 432
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1076 Message , [SEC-1076 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 433
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1081 Message , [SEC-1081 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 434
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1084 Message , [SEC-1084 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 435
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1089 Message , [SEC-1089 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 436
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1091 Message , [SEC-1091 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 437
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1095 Message , [SEC-1095 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 438
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1100 Message , [SEC-1100 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 439
for that specific switch. Severity ERROR SEC-1101 Message , [SEC-1101], ,, ERROR, , Failed to enable security on all switches. Please retry later. Probable Cause Indicates that the security enable failed on the fabric because one or more switches in the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 440
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity INFO 388 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 441
security event was planned. If the security event was planned, run the secFabricShow command to verify that all switches in the fabric are in the ready state. When all switches are in the ready state, retry the operation. Severity ERROR SEC-1110 Message , [SEC-1110], - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 442
Indicates that during an attempted secFcsFailover, no primary fabric configurations server (FCS) is present in the fabric. Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When Action all switches are in the ready state, retry the operation - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 443
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1117 Message , [SEC-1117 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 444
FCS), the data packet is corrupted, or a replay attack is launched on the switch. Recommended Action Verify that the security event was planned. If the security event was planned, verify that all switches in the fabric are in time synchronization with the primary FCS and that no external entity is - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 445
Indicates that a secure mode disable is attempted in a non-secure fabric. Recommended No action is required. Action Severity INFO SEC-1126 Message , The Primary FCS has failed over to a new switch. Probable Cause Indicates that an FCS failover operation was completed successfully - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 446
the security database sending from the primary fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 447
the security database sending from the primary fabric configurations server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service, or the signature verification failed - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 448
or decreased by 16. The values wrap fabric. RCS must be capable on all switches in the fabric to be enabled. If all switches are capable, it is automatically enabled. For any switch that does not support RCS, obtain the latest firmware version from your switch the switch is short of memory. The - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 449
transaction. Fabric-wide commands might take a few minutes to propagate throughout the fabric. Make for a security policy failed due to low memory or internal error. The status values can be run the supportSave command and contact your switch service provider. Severity INFO SEC-1158 Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 450
updated for that specific switch. Severity INFO SEC-1160 Message , [SEC-1160], ,, INFO, , Duplicate port in port list (). Probable Cause Indicates that a duplicate port member exists in the specified port list. Recommended Verify - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 451
in the fabric configurations server (FCS) list. Recommended Add the switch into the FCS policy list when using the lockdown option to enable security. Action Severity ERROR SEC-1165 Message , [SEC-1165], ,, ERROR, , Low memory, failed to enable security - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 452
Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR SEC-1170 Message , [SEC-1170 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 453
-1174], ,, ERROR, , Failed to set password. Probable Cause Indicates that the FCS or non-FCS password could not be set. Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no Action external entity - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 454
to generate new version stamp. Probable Cause Indicates that the primary fabric configurations server (FCS) failed to generate a new version stamp due to the fabric not being stable. Recommended Verify that all switches in the fabric are in time synchronization with the primary and that no Action - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 455
ERROR, , Policy to binary conversion error: Port is out range. Probable Cause Indicates that a switch database was enabled or disabled as the secondary authentication, accounting, and authorization (AAA) mechanism when the Remote Authentication Dial-in User Service - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 456
number> of switch . Probable Cause Indicates that a device connection control (DCC) security violation was reported. The specified device attempted to login using fabric login (FLOGI) to an unauthorized port. The DCC policy correlates specific devices to specific port locations. If - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 457
specified unauthorized host attempted to perform a read SNMP operation. Recommended Action Check the RSNMP policy to verify that hosts allowed access to the fabric through SNMP read operations are included in the RSNMP policy. If the host is allowed access but is not included in the RSNMP policy - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 458
a specified login security violation was reported. The incorrect password was used while trying to log in through the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 459
that specific switch. Severity WARNING SEC-1196 Message , [SEC-1196], ,, WARNING, , Switch does not have all default account names. Probable Cause Indicates that the default switch accounts admin and user do not exist on the switch when enabling security - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 460
Security violation: Unauthorized access to serial port of switch . Probable Cause Indicates that a serial enable the connection is MS policy. If the MS policy does not allow the connection, this is a valid violation message and an unauthorized entity is trying to access your fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 461
name>, device port name . Probable connection is allowed but not specified, enable the connection in the MS policy. entity is trying to access your fabric. Take appropriate action, as defined supportSave command and contact your switch service provider. Severity WARNING SEC-1251 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 462
supportSave command and contact your switch service provider. Severity ERROR SEC switch is in interop mode. Security is not supported. Probable Cause Indicates that the switch is interop-mode enabled. Recommended Disable interop-mode using the interopMode command before enabling the Secure Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 463
OS feature. Recommended Run the firmwareDownload command to update the firmware to the latest version for your specific Action switch. Verify that the firmware you are installing supports the Brocade Secure Fabric OS feature. Severity INFO SEC-1304 Message , [SEC-1304], - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 464
fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch remote authentication dial-in user service (RADIUS/LDAP) server responded to a switch request. Recommended If the message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 465
that Secure Fabric OS is still waiting for the reliable commit service (RCS) transaction enabled because one or more of the password policies is not set to default value. Probable Cause Indicates that the security enable failed on the fabric because one or more switches in the fabric have password - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 466
default values. Probable Cause Indicates that the passwdCfg parameters were set to default error. If the problem persists contact your switch service Action provider. switch Probable Cause Attempt to distribute database(s) to a switch that was configured not to accept distributions from the fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 467
Number> Probable Cause Indicates that the newly added switches to the fabric, as specified by Domain Number, have a conflicting policy with the local switch. Recommended Check the conflicting policy and make the new switches and the local switch policies the same. Action Severity WARNING SEC - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 468
its E-ports from connecting to the Action fabric. Severity WARNING SEC-1321 Message , [SEC-1321], ,, ERROR, , Failed secure mode enable command. Reason: . Probable Cause Indicates that the security enable failed on the fabric because switch has - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 469
Cause Indicates that due to a switch connection control (SCC) policy violation, the switch is being disabled on the specified port. Recommended Action No action is required unless the switch must remain in the fabric. If the switch must remain in the fabric, add the switch world-wide name (WWN) to - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 470
ports connected to the fabric. If the domain should be allowed to merge with the fabric on the fabric, because Authentication Policy is enabled on the switch. Recommended Action run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1330 Message < - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 471
>, [SEC-1331], ,, ERROR, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates that the secModeEnable command failed on the fabric, because default IP Filter policies are not active on the switch, or an active transaction exists on IP Filter - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 472
66 SEC-1332 420 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 473
that the simple network management protocol (SNMP) service could not be started because of the specified Reason. You will not be able to query the switch through SNMP. Recommended Verify that the IP address for the Ethernet and Fibre Channel interface is set correctly. If the Action specified - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 474
incorrect and the SNMP service will not work correctly. Recommended Change the SNMP configuration back to the default. Action Severity ERROR , configuration was reset to default Probable Cause Indicates that the simple network management protocol (SNMP) - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 475
. Action After the problem is corrected, rerun the support information to the USB storage device. Probable Cause Indicates that the supportSave command was used to transfer support information to an attached USB storage device. Recommended No action is required. Action Severity INFO Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 476
due to possible errors in subcommands being executed by the supportSave command. Recommended Run usbstorage to check the USB storage device settings. After the USB problem is corrected, Action rerun the supportSave command. Severity WARNING 424 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 477
disruption. Do not fail over or power down the system during firmware upgrade. No action is required. Run the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action Severity INFO Fabric OS Message Reference 425 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 478
[SULB-1004], INFO, FIRMWARE, , failover succeeded. New Active CP is running new firmware. Probable Cause Indicates that the previous standby and is running the new firmware version. Recommended Action No CP is rebooting with new firmware. Recommended Action No action is - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 479
because firmwareDownload is already in progress." "Sanity check failed because FABRIC OS is disabled on Standby CP." "Sanity check failed because HAMD "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 480
Standby CP failed to boot up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." "firmwareDownload has started on 0x77 0x78 0x79 0x7a 0x7b 0x7c 0x7d 428 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 481
. Blade is rebooting with the new firmware." 0xa4 "Blade has rebooted successfully." 0xa5 "New firmware failed to boot up. Please retry firmwareDownload." 0xa6 "firmwareCommit has started on the blade. This may take up to 10 minutes." 0xa7 Fabric OS Message Reference 429 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 482
switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory ." 0x1f 430 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 483
on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware upgrades within two feature releases (a feature release is indicated by a major number and a minor number, for example, X.Y). The following are major upgrade versions for the Fabric OS: v4 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 484
by an unsupported blade type in the chassis. Remove or power off the unsupported blades before proceeding. Another possible cause may issues. Please reload firmware packages on the file server, then retry firmwareDownload. If the problem persists, contact your Fabric OS Message Reference 53-1000600 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 485
download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO SULB-1010 failure is caused by an inconsistent filesystem, contact your switch service provider. Action Severity INFO SULB-1011 Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 486
, remove and re-insert the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1020 Message , [SULB-1020], AUDIT, ERROR, , New firmware failed to boot in slot . Probable Cause The BP - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 487
the firmware versions. for example, by powering off and on problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message , [SULB-1024], AUDIT, WARNING, , Firmware firmware versions. If the blade firmware is the same as the active CP firmware - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 488
to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. 436 Fabric OS Message Reference 53-1000600 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 489
internal firmware image. It may also be caused by the internal Ethernet or persistent storage hardware failure. Recommended Reset the switch. This will cause the internal image to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR Fabric OS - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 490
download and after download of the firmware to store version information. Recommended No action is required. Action Severity INFO SULB-1037 Message , [SULB-1037], , AUDIT, INFO, , HCL failed. Reboot the switch manually using the reboot command. However - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 491
as inconsistent during failover or recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command and then the slotPowerOn command. On a Brocade 7500 or AP7600 switch, reboot or power cycle the switch. Severity ERROR Fabric OS Message Reference 439 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 492
into the fabric. Recommended Load a firmware version on standby that supports NPIV functionality, using the firmwareDownload Action command. Severity WARNING SWCH-1007 Message Probable Cause , [SWCH-1007], ,, WARNING, , Switch port disabled - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 493
the blade is enabled with the port configuration that already has area swapped. Recommended Action Replace the blade with ports that support port swap. Then port swap the ports back to ports default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping. Severity - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 494
processor (CP) does not support Trunk Area functionality, but the switch has some ports with Trunk Area enabled. Recommended Load a firmware version on standby that supports Trunk Area functionality, using the Action firmwareDownload command. Severity WARNING 442 Fabric OS Message Reference 53 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 495
more programs to register with system services or to fail over to active status. Recommended Action The switch is in an inconsistent state and can be corrected only by a reboot or power cycle. Before rebooting the chassis, record the firmware version on the switch or control processor (CP) and run - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 496
card). This message occurs only on the Brocade 24000 and 48000. Recommended Action As firmware. Note that the chassisConfig option 1 should be valid for all platforms running any valid firmware to gather troubleshooting data. No supportSave command to gather troubleshooting data. Issue a reboot - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 497
Action Run the memShow command to view the switch memory usage. Reboot or power cycle the switch. Run supportFtp as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL SYSM-1002 Message , [SYSM - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 498
the incompatible control processor (CP)/chassis check. For engineering use only Recommended Delete the /var/chassis_backplane_override file and reboot the CP. Action Severity WARNING 446 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 499
MANUAL generated by the tracedump -n command Recommended Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command Action and contact your switch service created on the switch or the indicated slot but is not automatically transferred from the switch due to an - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 500
transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR TRCE-1004 Message , [TRCE-1004 This feature is enabled by the supportFtp -t command. Recommended No action is required. Action Severity INFO 448 Fabric OS Message Reference - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 501
is only applicable to the Brocade 24000, and 48000. Recommended contact your switch service provider. Severity ) or restart the switch. If the message contact your switch service provider. Severity only applicable to the Brocade 24000 and 48000. and contact your switch service provider. Severity - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 502
system and the indicated slot is unavailable. Recommended Check that the AP blade is enabled and retry the command. If the AP blade is already enabled, run Action the supportSave command and contact your switch service provider. Severity WARNING 450 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 503
the user name or password is entered incorrectly. Recommended Action Normally, this message indicates a typing error by an authorized user. If this message occurs repeatedly, it might indicate an unauthorized user trying to gain access to a switch. When Secure mode is enabled on the fabric, the IP - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 504
configuration change for the switch. The track change feature records any change to the configuration file in nonvolatile memory, including a configDownload. Run the trackChangesSet 1 command to enable the track changes feature. Action Severity INFO 452 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 505
correctly. Verify that this clock server is accessible to the switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset the clock server to LOCL. Severity INFO Fabric OS Message Reference 453 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 506
might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. • Synchronizing packet is missed due to fabric reconfiguration or role change of the principal or primary fabric configuration server (FCS) switch. If the message does not - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 507
Severity WARNING 75 TS-1008 Fabric OS Message Reference 455 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 508
75 TS-1008 456 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 509
Message , [UCST-1007], , FFDC, CRITICAL, , Inconsistent route detected: Port = , should be Probable Cause Indicates that the switch detected an inconsistency in the routing database between the routing protocol and the hardware - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 510
76 UCST-1020 458 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 511
, [UPTH-1001], ,, WARNING, , No minimum cost path in candidate list Probable Cause Indicates that the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists in the candidate list (domain ID list). Recommended No action is required - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 512
77 UPTH-1001 460 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 513
-1005], ,, WARNING, , HTTP server will be restarted for logfile truncation Indicates that the size of HTTP logfile exceeded the maximum limit. Fabric OS Message Reference 461 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 514
of IP Address Probable Cause Indicates that the IP address of the switch changed and the HTTP server is restarted. Recommended No action is required where the built-in recovery process has failed to restore http services. The problem often results from invalid configuration of ssl certs. But there - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 515
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command to save these core files and contact your switch service provider. Severity ERROR Fabric OS Message Reference 463 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 516
79 ZOLB-1001 464 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 517
usually indicates problems when adding content-addressable memory (CAM) entries before the filter setup. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 518
80 ZONE-1005 In session-based zoning, database. If the devices on the port are defined by a mixture of port IDs and WWNs, the zone enforcement is session based. If the S_ID list of the one specification type, either WWN or . Severity WARNING 466 Fabric OS Message Reference 53- - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 519
content-addressable memory (CAM) entries before the filter setup. Recommended Action There are two ways to avoid this problem. • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. Severity - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 520
supported. Probable Cause Indicates that the QuickLoop feature is not supported in the current code release. If the QuickLoop zoning configuration is enabled on the switch, it will not be supported incorrect number of Initiator and Target devices. 468 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 521
port( - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 522
80 ZONE-1022 switch on the other side of the port is busy. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service port. Severity INFO 470 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 523
80 ZONE-1027 memory and force a smaller zone database for the entire fabric. Recommended Action Edit the zone database to keep it within the allowable limit for the specific switches in your fabric. Refer to the Fabric OS Administrator's Guide for information on the zone database sizes supported - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 524
80 ZONE-1030 If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service Switch is in interop mode. (switch, port) members not supported. Probable Cause The switch not have enough memory for the zone - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 525
is not found. Recommended Use the firmwareDownload command to reinstall the firmware. Action Severity WARNING ZONE-1035 Message , [ZONE-1035], the Fabric OS cannot rename the zone configuration file. Typically the zone configuration is too large for the memory available on the switch. - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 526
file name>: error message . Probable Cause Indicates that the Fabric OS cannot examine the zone configuration file. Typically the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 527
INFO, , The Default Zone access mode is set to All Access. Probable Cause Indicates that the Default Zone access mode is set to All Access. Recommended Verify that this Default Zone access mode change was done intentionally. Action Severity INFO Fabric OS Message Reference 475 53 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 528
does not support defined database. Probable Cause Indicates that remote Brocade switch is running downlevel version of FOS that does not suppport the defined database. Recommended It is recommended to upgrade all swtiches to same release level version. Action Severity INFO 476 Fabric OS Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 529
Audit Log Messages Section II This section provides the Audit messages, including: •AUDIT AUTH System Messages 479 •AUDIT CONF System Messages 483 •AUDIT FW System Messages 485 •AUDIT HTTP System Messages 487 •AUDIT SEC System Messages 489 •AUDIT SNMP System Messages 505 •AUDIT SULB System - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 530
- HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 531
PKI objects were removed using the pkiRemove command. The Operation Type can be either "Created" or "Removed". Recommended No action is required. Action Severity INFO Fabric OS Message Reference 479 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 532
specified port is off, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch the supportSave command and contact your switch service provider. Severity INFO 480 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 533
>, , , Event: , Status: failed, Info: Port has been disabled due to authentication failure with code '' then run the supportSave command and contact your switch service provider. Severity INFO Fabric OS Message Reference 481 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 534
2 AUTH-3008 482 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 535
. If admin domain (AD) is enabled, the AD number is specified in switch was unsuccessful because there are one or more parameters that require the switch to be disabled. Recommended Disable the switch using the switchDisable command and download the configuration. Action Severity WARNING Fabric - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 536
3 CONF-1022 484 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 537
, , , , Event: , Status: success, Info: Probable Cause Indicates that Port Fencing was enabled/disabled successfully. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 485 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 538
4 FW-3001 486 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 539
was planned, no action is required. If the event was Action not planned, take appropriate action as defined by your enterprise security policy. Severity INFO Fabric OS Message Reference 487 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 540
5 HTTP-1003 488 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 541
State change: Enabled or Disabled> on the fabric. Probable Cause Indicates that the security mode of the fabric was either enabled or disabled. been saved. • A security policy has been aborted. • A non-FCS password has changed. Recommended Action Verify that the security event was planned. If the - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 542
, , [SEC-3006], INFO, SECURITY, , , , Event: , Status: success, Info: Removed member(s) from policy . 490 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 543
Probable Cause Indicates that a user has removed the specific members from the specified security policy. Note: If from position to . Probable Cause Indicates that the fabric configurations server (FCS) list has been modified. One of the members of the list has - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 544
>, , , Event: , Status: success, Info: Temp Passwd on domain [] for account []. Probable Cause Indicates , Status: success, Info: Security Version stamp is reset. 492 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 545
a user has changed the position of the remote authentication dial-in user service (RADIUS) server. Recommended Action Verify that the RADIUS server position was specified attribute of the remote authentication dial-in user service (RADIUS) server. Fabric OS Message Reference 493 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 546
Cause Indicates that a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify that the RADIUS configuration was intentionally as defined by your enterprise security policy. Severity INFO 494 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 547
success, Info: Passwdcfg parameters set to default values. Probable Cause Indicates that the passwdCfg parameters are set to default values. Recommended Action Verify that the method and IP Address>. Indicates that a failed login attempt occurred. Fabric OS Message Reference 495 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 548
attempts exceeded. Probable Cause Indicates that failed password attempts exceeded, the account has been locked. Recommended The Account may automatically unlock after the lockout duration has expired or an administrator Action may manually unlock the account. Severity INFO SEC-3024 Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 549
Status: success, Info: User account [] added. Role: [], Password [], Home AD [], AD list []. User Name>] deleted. Indicates that the specified user account was deleted. Fabric OS Message Reference 497 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 550
>, , , Event: , Status: success, Info: Probable Cause Indicates the specified secCertUtil operation was performed. Recommended Action Verify defined by your enterprise security policy. Severity INFO 498 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 551
, , Event: , Status: success, Info: Switch is configured to database. Probable Cause Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set to . Probable Cause Indicates - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 552
planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO 500 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 553
host is displayed in the message. Recommended Check for unauthorized access to the switch through the specified protocol connection. Take Action appropriate action as defined by your as defined by your enterprise security policy. Severity INFO Fabric OS Message Reference 501 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 554
SEC-3048], INFO, SECURITY, , , FIPS mode has been enabled in the system using force option. Probable Cause Indicates that the system has been forced action as defined by your enterprise security policy. 502 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 555
SEC-3050], INFO, SECURITY, Event: , Status: success, Info: . Probable Cause Indicates that the specified sshutil operation was performed.. Recommended Verify if by your enterprise security policy. Severity INFO Fabric OS Message Reference 503 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 556
6 SEC-3050 504 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 557
s incorrect and the SNMP service will not work correctly. Recommended Reset the SNMP configuration to default. Action Severity ERROR SNMP-1005 factory default. Recommended Execute the snmpConfig --show command to display the new group configuration. Action Severity INFO Fabric OS Message - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 558
7 SNMP-1006 506 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 559
continue without disruption. Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus command for more information. Indicates that the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 560
because firmwareDownload is already in progress." "Sanity check failed because FABRIC OS is disabled on Standby CP." "Sanity check failed because HAMD "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 561
CP failed to boot up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." "firmwareDownload has started on 0x76 0x77 0x78 0x79 0x7a 0x7b 0x7c 0x7d Fabric OS Message Reference 509 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 562
. Blade is rebooting with the new firmware." 0xa4 "Blade has rebooted successfully." 0xa5 "New firmware failed to boot up. Please retry firmwareDownload." 0xa6 "firmwareCommit has started on the blade. This may take up to 10 minutes." 0xa7 510 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 563
switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory ." 0x1f Fabric OS Message Reference 511 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 564
on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware upgrades within two feature releases (a feature release is indicated by a major number and a minor number, for example, X.Y). The following are major upgrade versions for the Fabric OS: v4 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 565
by an unsupported blade type in the chassis. Remove or power off the unsupported blades before proceeding. Another possible cause may firmware packages on the file server, then retry firmwareDownload. If the problem persists, contact your system administrator. Table 11 Fabric OS Message Reference 513 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 566
firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1018 Message AUDIT, , [SULB-1018], ERROR, FIRMWARE, , , , Firmwaredownload timed out in slot . 514 Fabric OS Message Reference - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 567
the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message AUDIT, , [SULB-1021], WARNING, FIRMWARE, , , , Firmware is being downloaded to the blade in slot - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 568
command to monitor the progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message AUDIT, , [SULB-1024], WARNING, FIRMWARE, , , , Firmware commit has completed on the blade in slot - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 569
the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1032], WARNING, FIRMWARE, switch. Recommended Run the firmwareShow command to verify the firmware versions. Run the switchShow command to Action make sure the switch is enabled - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 570
to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, , [SULB-1037], ERROR, FIRMWARE, , , , HCL failed. Reboot the switch manually using the reboot command. However - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 571
-details>, , , Event: , Status: success, Info: \"\" deleted. Indicates that the specified zone object has been deleted. Fabric OS Message Reference 519 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 572
planned, no action is required. If the event was Action not planned, take appropriate action as defined by your enterprise security policy. Severity INFO 520 Fabric OS Message Reference 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 573
configuration>\" enabled. . Probable Cause Indicates that the specified zone configuration has been enabled. Recommended has been successfully saved to magnetoresistive random access memory (MRAM). Recommended Verify that the event was Fabric OS Message Reference 521 53-1000600-02 - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 574
action as defined by your enterprise security policy. Severity INFO ZONE-3014 Message Probable Cause AUDIT, , [ZONE-3014], INFO, FABRIC, , , , Event: , Status: success, Info: \"\" added to - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 575
, take appropriate action as defined by your enterprise security policy. Severity INFO ZONE-3017 Message AUDIT, , [ZONE-3017], INFO, FABRIC, , , , Event: , Status: success, Info: \"\" created - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 576
take appropriate action as defined by your enterprise security policy. Severity INFO ZONE-3020 Message AUDIT, , [ZONE-3020], INFO, FABRIC, , , , Event: , Status: success, Info: \"\" removed from - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 577
as defined by your enterprise security policy. Severity INFO ZONE-3025 Message Probable Cause Recommended Action AUDIT, , [ZONE-3025], INFO, FABRIC, , , , Command: Info: executed. In AD . Indicates that the admin domain ad - HP Brocade 8/12c | Brocade Error Message Reference Guide v6.1.0 (53-1000600-02, - Page 578
9 ZONE-3025 Severity INFO 526 Fabric OS Message Reference 53-1000600-02
53-1000600-02
12 March 2008
Fabric OS
Message Reference
Supporting Fabric OS v6.1.0