HP Brocade 8/12c HP StorageWorks MPX200 Multifunction Router Release Notes (56
HP Brocade 8/12c Manual
 |
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Brocade 8/12c manual content summary:
- HP Brocade 8/12c | HP StorageWorks MPX200 Multifunction Router Release Notes (56 - Page 1
HP StorageWorks MPX200 Multifunction Router Release Notes Part Number: 5697-0432 Fourth edition: June 2010 - HP Brocade 8/12c | HP StorageWorks MPX200 Multifunction Router Release Notes (56 - Page 2
Legal and notice information © Copyright 2009-2010 Hewlett-Packard Development Company, L.P. - HP Brocade 8/12c | HP StorageWorks MPX200 Multifunction Router Release Notes (56 - Page 3
Enterprise Virtual Array (EVA) family of Fibre Channel (FC) storage systems is supported for integrated iSCSI connectivity using the MPX200 Multifunction Router. The MPX200 hardware is integrated with up to four EVA storage systems and HP StorageWorks Command View EVA to deliver multiprotocol - HP Brocade 8/12c | HP StorageWorks MPX200 Multifunction Router Release Notes (56 - Page 4
is required to configure the MPX200 Multifunction Router: • B-series or C-series FC switch (fabric-attached only) • Optical small form-factor pluggable (SFP) transceivers: • FC ports, 8 Gb/s short range SFP (AJ718A) • FC ports, 4 Gb/s short range SFP (A7446B) • 10 GbE ports, short range SFP+ (455883 - HP Brocade 8/12c | HP StorageWorks MPX200 Multifunction Router Release Notes (56 - Page 5
Router EVA iSCSI Quick Start Instructions for Microsoft Windows, the HP StorageWorks Multifunction Router FCIP Quick Start Instructions, and the HP StorageWorks MPX200 Multifunction Router User Guide, available on the HP Manuals website: http://www.hp.com/support/manuals Under Storage, click Storage - HP Brocade 8/12c | HP StorageWorks MPX200 Multifunction Router Release Notes (56 - Page 6
Safari Java 2 Runtime Environment to support web applet User-defined bandwidth for a source array cannot be set greater than 400 MB/s with GUI The source array bandwidth setting may be user-defined up to 1600 MB/s. However, the MPX200 manager for Data Migration Services GUI 3.0.1 does not allow - HP Brocade 8/12c | HP StorageWorks MPX200 Multifunction Router Release Notes (56 - Page 7
1 To enable timestamps, under HKLM\SYSTEM\CurrentControlSet\Services\Tcpip\ Parameters, set the Tcp1323Opts entry to REG_DWORD = 2. Method 2 CAUTION: Use the Registry Editor at your own risk. Using it incorrectly can cause serious problems that require reinstallation of the operating system. Be - HP Brocade 8/12c | HP StorageWorks MPX200 Multifunction Router Release Notes (56 - Page 8
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters] "Tcp1323Opts"=dword:00000002 Double-click the tcp1323opts.reg file to add the changes to the registry for the iSCSI initiator. Effective date June 2010 8
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
 |
 |
HP StorageWorks
MPX200 Multifunction Router Release
Notes
Part Number: 5697-0432
Fourth edition: June 2010