HP Brocade 8/12c Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599-
HP Brocade 8/12c Manual
View all HP Brocade 8/12c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Brocade 8/12c manual content summary:
- HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 1
53-1000599-02 12 March 2008 Fabric OS Command Reference Manual Supporting Fabric OS 6.1.0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 2
Brocade B-wing symbol, DCX, and SAN Health are trademarks of Brocade Communications Systems, Inc., in the United States and/or in other countries. All other brands, products, or service names are or may be trademarks or service service offered or to be offered by Brocade. Brocade Brocade Brocade Brocade - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 3
Communications Systems, Incorporated Corporate Headquarters Brocade Communications Systems, Inc. 1745 Technology Drive San Jose, CA 95110 Tel: 1-408-333-8000 Fax: 1-408-333-8101 Email: [email protected] European and Latin American Headquarters Brocade Communications Switzerland Sàrl Centre Swissair - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 4
53-1000599-02 Summary of Changes Publication Date September 2006 15 Jun 2007 Added 13 new commands, Updated 23 commands with new options in support of v6.0. Removed 46 obsolete commands. Edit/revise ~ 150 commands. Added command syntax conventions to Preface.Updated FCS, standby CP, and RBAC - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 5
document is organized xvii Supported hardware and software xvii Chapter 1 Using Fabric OS Commands Understanding role-based access control 1 Understanding admin domain restrictions aaaConfig 5 ad 9 ag 19 agshow 30 aliAdd 32 aliCreate 33 aliDelete 34 aliRemove 35 aliShow 36 aptPolicy - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 6
55 cfgAdd 56 cfgClear 57 cfgCreate 58 cfgDelete 59 cfgDisable 60 cfgEnable 61 cfgMcdtmode 62 cfgRemove 63 cfgSave 64 cfgSaveActiveToDefined 65 cfgShow 66 cfgSize 68 cfgTransAbort 70 cfgTransShow 71 chassisConfig 72 chassisName 74 chassisShow 75 cliHistory 77 configDefault - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 7
Fabric OS Command Reference 53-1000599-02 diagEnablePost 104 diagHelp 105 diagPost 106 diagRetry 107 diagSetBurnin 108 diagSetCycle 109 diagShow 110 diagSkipTests 111 diagStopBurnin 112 dbgShow 113 distribute 114 dlsReset 116 dlsSet 117 dlsShow 118 dnsConfig 119 enclosureShow 120 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 8
fcipPathTest 149 fcLunQuery 151 fcPing 152 fcpLogClear 154 fcpLogDisable 155 fcpLogEnable 156 fcpLogShow 157 fcpProbeShow 158 fcpRlsShow 159 fcrBcastConfig 160 fcrChipTest 162 fcrConfigure 164 fcrFabricShow 165 fcrLsanCount 166 fcrLsanMatrix 167 fcrPathTest 172 fcrPhyDevShow 174 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 9
Fabric OS Command Reference 53-1000599-02 firmwareRestore 218 firmwareShow 219 fosConfig 220 fruReplace 222 fspfShow 223 fwAlarmsFilterSet 225 fwAlarmsFilterShow 226 fwClassInit 227 fwConfigReload 228 fwConfigure 229 fwFruCfg 234 fwHelp 235 fwMailCfg 236 fwPortDetailShow 238 fwSamShow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 10
interopMode 279 iodDelayReset 282 iodDelaySet 283 iodDelayShow 284 iodReset 285 iodSet 286 iodShow 287 ipAddrSet 288 ipAddrShow 291 ipfilter 292 iscsiCfg 297 iscsiChipTest 305 iscsiHelp 306 iscsiPathTest 307 iscsiPortCfg 308 iscsiSessionCfg 311 iscsiSwCfg 313 islShow 315 isnscCfg - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 11
Fabric OS Command Reference 53-1000599-02 msPlatShow 348 msPlatShowDBCB 349 msPlClearDB 350 msPlMgmtActivate 351 msPlMgmtDeactivate 352 msTdDisable 353 msTdEnable 354 msTdReadConfig 355 myId 356 nbrStateShow 357 nbrStatsClear 358 nodeFind 360 nsAliasShow 362 nsAllShow 365 nsCamShow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 12
perfSetPortEEMask 409 perfShowAlpaCrc 411 perfShowPortEEMask 412 perfTTmon 414 pkiCreate 417 pkiRemove 418 pkiShow 419 policy 420 portAlpaShow 423 portBufferShow 424 portCamShow 426 portCfg 428 portCfgAlpa 441 portCfgCreditRecovery 442 portCfgDefault 443 portCfgEPort 444 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 13
Fabric OS Command Reference 53-1000599-02 portLogClear 485 portLogConfigShow 486 portLogDisable 487 portLogDump 488 portLogDumpPort 489 portLogEnable 490 portLogEventShow 491 portLoginShow 492 portLogPdisc 493 portLogReset 494 portLogResize 495 portLogShow 496 portLogShowPort 501 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 14
secActiveSize 555 secAuthSecret 556 secCertUtil 558 secDefineSize 564 secGlobalShow 565 secHelp 567 secPolicyAbort 568 secPolicyActivate 569 secPolicyAdd 570 secPolicyCreate 572 secPolicyDelete 575 secPolicyDump 577 secPolicyFCSMove 579 secPolicyRemove 581 secPolicySave 583 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 15
Fabric OS Command Reference 53-1000599-02 supportShowCfgDisable 631 supportShowCfgEnable 632 supportShowCfgShow 633 switchBeacon 634 switchCfgPersistentDisable 635 switchCfgPersistentEnable 636 switchCfgSpeed 637 switchCfgTrunk 638 switchDisable 639 switchEnable 640 switchName 641 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 16
712 zoneObjectExpunge 713 zoneObjectRename 714 zoneRemove 715 zoneShow 716 Primary FCS commands Primary FCS commands 717 Control Processor Commands Commands supported on the standby CP 719 Command availability Command validation checks 721 Command RBAC permissions and AD types 722 xvi - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 17
is a command reference manual written to help system administrators and technicians operate, maintain, and troubleshoot Brocade storage area network (SAN) products. "About this document" contains the following sections: • "How this document is organized," next • "Supported hardware and software" on - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 18
Brocade 300 switch • Brocade 4016 switch • Brocade 4018 switch • Brocade 4020 switch • Brocade 4024 switch • Brocade 4100 switch • Brocade 4900 switch • Brocade 5000 switch • Brocade 5100 switch • Brocade 5300 switch • Brocade 7500 SAN router • Brocade 7600 switch • Brocade 48000 director • Brocade - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 19
default, netstat lists open sockets. For a list of all netstat options, refer to the UNIX man pages. Information that was deleted since this document was last released for Fabric OS v6.0.0. Help pages are removed from the manual when the associated commands are deprecated or no longer supported on - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 20
supported on v6.x platforms.) • setGbicMode (Not supported on v6.x platforms.) • setSfpMode (Not supported on v6.x platforms.) • slTest (Not supported on v6.x platforms.) • switchReboot (Not supported display a command "no manual entry for command" message. portions of this guide are presented in - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 21
, and warnings The following notices and statements are used in this manual. They are listed below in order of increasing severity of potential hazards of these conditions or situations. Key terms For definitions of SAN-specific terms, visit the Storage Networking Industry Association online - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 22
to instantly scale the fabric by provisioning additional ports via license key upgrade (applies to some models of switches.) • Brocade Extended Fabrics - Provides up to 500 km of switched fabric connectivity at full bandwidth over long distances. xxii Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 23
logical ISL with a total bandwidth of 32 Gbit/sec that can support any number of devices. • Brocade Fabric Manager - Enables administration, configuration, and maintenance of fabric switches and SANs with host-based software. • Brocade Advanced Performance Monitoring - Enables performance monitoring - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 24
OS Administrator's Guide. Getting technical help Contact your switch support supplier for hardware, firmware, and software support, including product problem, including the switch or fabric behavior immediately • following the problem, and specific questions • Description of any troubleshooting - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 25
at the top of the nonport side of the chassis. For the Brocade 4016, 4018, 4020, and 4024 embedded switches: Provide the license ID. Use the licenseIDShow command to display the WWN. Document feedback Quality is our first concern at Brocade, and we have made every effort to ensure the accuracy and - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 26
xxvi Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 27
Fabric OS Commands Chapter 1 This chapter explains how to manage a Brocade SAN and Brocade switches and directors using the Fabric OS command line interface (CLI). The following topics discussed: • "Understanding role-based access control" on page 1 • "Understanding admin domain restrictions" on - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 28
Domain restrictions that apply to the commands included in this manual. Using the command line interface The Fabric OS command line interface (accessed via Telnet, SSH, or serial console) provides full management capability on a Brocade switch. The Fabric OS CLI enables an administrator to monitor - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 29
includes a synopsis of its syntax, a description of command use, and a set of examples. The same information can be accessed by issuing help command on a Brocade switch or director. This command displays the help page for the specified command. For example, to display the help page for ad, type - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 30
1 Using the command line interface 4 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 31
manual for specific details. Configuration changes are persistently saved and take effect with the next AAA request. The configuration applies to all switch instances in a platform supporting multiple switch domains. Customers can use centralized RADIUS servers to manage AAA services for a switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 32
by the IP address. --show Displays the current AAA service configuration. Supported range is between 1 and 30 seconds. The default is 3 sec. This operand is optional. If no timeout is specified, the default is used. -d domain Specifies the Windows domain name for the LDAP server, e.g., brocade - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 33
server from the configuration. The server must match one of the IP addresses or the names shown in the current configuration. The following of AAA services. Services must be enclosed in double quotation marks. The following AAA services and service pairs are valid: "local" Default setting. - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 34
conf radius 1 To change the configuration for RADIUS server 192.168.233.48: switch:admin> aaaconfig --change 192.168.233.48 -conf ldap -p 3002 -s newsecret -t 1 To replace the AAA service with backup option: switch:admin> aaaconfig --authspec "ldap;local" -backup See Also none 8 Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 35
zone mode should be set to "No Access". To set the default zone mode to "No Access" execute the following command sequence: switch:admin> ad --select AD0 switch:admin> defzone --noaccess switch:admin> cfgsave Refer to defZone help for more information. Fabric OS Command Reference 9 53-1000599 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 36
the description of actions. The following actions are supported: --activate arg Activates an Admin Domain. . AD0 is always in an activated state. By default, after the Admin Domain is enabled, the devices and enforces the defined configuration on all switches in the fabric. ad --apply prompts - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 37
transaction buffer until you issue ad --apply or ad --save. --save Saves the outstanding Admin Domain transaction to the defined configuration on all switches in the fabric. The saved Admin Domain definition is enforced only when ad --apply is issued. Attempts to modify and save an Admin Domain - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 38
-AD254 context, the command, by default, displays the members of the current all members that are from non-Admin Domain aware switches are marked with a plus sign (+). Members that Admin Domain transaction. The following arguments are supported with selected AD actions: ad_id Uniquely identifies - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 39
Uses traditional zone WWN member types. Benefits include: • Supports node or port WWNs. • End-device members, switch. Any switch member specified in Domain ID format is converted into a switch WWN based on the current fabric information. Operations with switch list fail if the domain ID to switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 40
--create "AD1", -d "100,5; 1,3; 21:20:00:00:e0:8b:05:4d:05" -s "100; 10:00:00:60:69:80:59:13" To deactivate Admin Domain 5: switch:admin> ad --deactivate 5 You are about to deactivate an AD. This operation will fail if an effective zone configuration exists in the AD Do you - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 41
--remove "AD1", -d "100,5; 1,3; 21:00:00:e0:8b:05:4d:05" To remove the switch 100 from AD1: switch:admin> ad --remove "AD1", -s "100" To save any outstanding Admin Domain definition-related transaction buffer: switch:admin> ad --save You are about to save the outstanding AD membership. This action - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 42
2 ad 16 Switch port members: Switch WWN members: Effective configuration AD: 1 : AD1 Active Device WWN members: Switch port members: Switch WWN members: 1,0; 1,1; 1,2; 1,3; 1,4; 1,5; 1,6; 1,7; 1,8; 1,9; 1,10; 1,11; 1,12; 1,13; 1,14; 1,15; 10:00:00:60:69:00:02:53; 21:00:00:80:e5:12:8b:37; - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 43
; 10:00:00:06:2b:12:68:3f; 1,8; 69,16; AD Number: 3 AD Name: AD3 State: Inactive Device WWN members: Switch port members: 11:22:33:44:55:66:77:88*; 10:00:00:06:2b:12:64:54; 3,28; 3,29; 3,30; 3,31; 69,16; 69,18; 69,19; 69,21; 1,115; 1,118; 1,120 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 44
: Switch port members: 10:00:00:00:00:17:00:00; 10:00:00:00:00:15:00:00; 2,52; 2,53; 2,54; 2,55; 21,5; 3,28; 3,29; 98,72; 98,75; 69,16; 00:00; Effective configuration AD Number: 50 AD Name: AD50 State: Active Device WWN members: Switch port members: 10:00:00:00:00:17:00:00; 10:00:00:00:00:15: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 45
ag 2 ag Enables Access Gateway (AG) and manages AG-specific operations. Synopsis ag --help ag --show ag --modeshow | --modeenable |--modedisable ag [--policyenable | --policydisable] policy ag --policyshow ag --mapshow [N_Port] ag [--mapset | --mapadd |--mapdel] N_Port [F_Port1; F_Port2;...] ag - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 46
Notes AG is supported only on selected Brocade hardware platforms. Refer to the Access Gateway Administrator's Guide for Hardware support and AG security. ADS policy is disabled by default, which means that all devices can connect to the switch. --policyenable policy Enables the specified port - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 47
. When enabled, this policy applies to all the ports on the switch. By default all devices have access to the fabric on all ports. --policydisable . The port grouping feature supports specifying a set of N_Ports to be included in the Port Group (PG) Policy. The factory default PG is "pg0", which - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 48
port group with the specified new name. Port Group ID must not exceed 64 characters. --pgremove pgid Deletes the specified port group. The N_Ports in the Port Group that was deleted are moved to the default Port Group, which is pgid 0. --failoverenable N_Port Enables the failover policy for a given - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 49
ag 2 • If preferred Secondary F_Port to N_Port Mapping is in place, and the primary N_Port comes back online, then the F_Ports are re-routed through the primary N_Port. If the secondary N_Port comes online, while the primary N_Port is still offline, F_Ports are re-routed through the Secondary - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 50
and 12: switch:admin> ag --show Name : switch_ST1 NodeName : 10:00:00:05:1e:35:9b:e7 Number of Ports : 16 IP Address(es) : 10.115.74.53 Firmware Version : v6 0 10.32.74.109 4;5;6; 1 0x6d0b00 20:0b:00:05:1e:37:11:aa 0 1 10.32.74.109 7;8;9; 2 0x6d0c00 20:0c:00:05:1e:37:11:aa 1 0 10.32.74.109 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 51
. Do you want to continue? (yes, y, no, n): [no] y 5. To disable auto policy when the switch is disabled: switch:admin> ag --policydisable auto Default factory settings will be restored. Default mappings will come into effect. Please save the current configuration using configupload. Do you want to - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 52
- PG_ID is the Port Group ID and PG_Name is the Port Group Name. 2. To clear all F_Ports mapped to the configured primary N_Port 0: switch:admin> ag --mapset 0 "" F_Port to N_Port mapping has been updated successfully 3. To add F_Ports 4 and 6 to N_Port 0 (observe that Port 0 has no configured - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 53
admin> ag --failoverenable 1 Failover policy is enabled for port 1 switch:admin> ag --failoverdisable 0 Failover policy is disabled for port 0 switch:admin> ag --failovershow 0 Failover on N_Port 0 is not supported switch:admin> ag --failbackdisable 2 Failback policy is disabled for port 2 admin - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 54
2 Failback on N_Port 2 is supported Port Group commands 1. To display Port Group information: switch:admin> ag --pgshow PG_ID N_Ports PG_Name 0 1;3 pg0 2 0;2 SecondFabric 2. To create a port group "FirstFabric" that includes N_Ports 1 and 3: switch:admin> ag --pgcreate - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 55
list of allowed devices for Ports 1, 10 and 13 to 'all access': switch:admin> ag--adsset"1;10;13""*" WWN list set successfully as the Allow F_Port[s] See Also 4. To display the lists of allowed devices on the switch: switch:admin> ag--adsshow F_Port WWNs Allowed 1 ALL ACCESS 3 20:03:08: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 56
Gateway information registered with the fabric: switch:admin> agshow --name WT_Stealth Name : WT_Stealth World Wide Name : 10:00:00:05:1e:34:e4:bd N-Port ID(s) : 0x010200 Number of Ports : 16 IP Address(es) : 10.202.90.231 Firmware Version : v1.0.0 N-Ports : 1 F-Ports : 2 Attached - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 57
:00:05:1e:04:06:ae 24 10.32.173.64 v6.0.0 local L5D2_B14_4024_1 See Also To display all Access Gateways attached to the fabric: switch:admin> agshow Worldwide Name Ports Enet IP Addr Firmware Local/Remote Name 10:00:00:05:1e:02:b7:2c 16 10.32.173.62 v6.0.0 remote L5D2_B10_4016_1 10:00:00 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 58
by one or more of the following methods: • A switch domain and port area or index number pair. Use switchShow switch:admin> aliadd "array1", "1,2" switch:admin> aliadd "array2", "21:00:00:20:37:0c:72:51" switch:admin> aliadd "loop1", "4,5[0x02]; 6,7[0xEF]" See Also aliDelete, aliRemove, aliShow 32 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 59
of valid port area or index numbers. • WWN Examples To create a zone alias: switch:admin> alicreate "array1", "2,32; 2,33; 2,34" switch:admin> alicreate "array2", "21:00:00:20:37:0c:66:23" switch:admin> alicreate "loop1", "4,5[0x02]; 6,7[0xEF]; 5,4" See Also aliAdd, aliDelete, aliRemove, aliShow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 60
configuration to nonvolatile memory with the cfgSave command. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operand is required: "aliName" Specify the name of the zone alias to be deleted. This operand must be enclosed in - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 61
be enclosed in quotation marks. Members must be separated by semicolons. An alias member can be specified by one or more of the following methods: • A switch domain and port area or index number pair. Use switchShow for a list of valid port area or index numbers. • WWN The member list is located - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 62
specify 1 to display the contents of the nonvolatile memory. The default value is 0. If no parameters are specified, all zone configuration a description of this display. Examples To display all zone aliases beginning with "arr": switch:admin> alishow "arr*" alias: array1 21:00:00:20:37:0c:76:8c - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 63
when there is little or no oversubscription of the ISLs. Note that static routes are supported only with this policy. 3 Exchange-based routing policy (default). With this policy, the path chosen for an ingress frame is based on: • Ingress port on which the frame was received • FC address of the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 64
under exchange based policy (3). The following policies are supported: AP Shared Link Policy (default). AP Dedicated Link Policy. This policy dedicates some links to the ingress traffic and some links to the egress traffic. Examples To change the current APT policy: switch:admin> switchdisable - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 65
or disabled the filters. Based on the configuration, certain add the syslogd server IP address. Note The SECURITY, 3-CONFIGURATION, 4-FIRMWARE and 5-FABRIC filters switch:admin> auditcfg --class 2,3 Audit filter is configured. switch:admin> auditcfg --disable Audit filter is disabled. switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 66
switch authentication parameters. Use --set to change authentication parameters such as protocol, Diffie-Hellman group (DH group), or hash type. When no protocol is set, the default displays the usage. The following operands are supported: --show Displays local authentication configuration. --set - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 67
on all E_Ports, but the port is not disabled if the connecting switch does not support authentication or the authentication policy is turned off. passive (default) Sets the authentication policy to passive mode. The switch does not initiate authentication but participates in authentication if the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 68
-a dhchap Authentication is set to dhchap. To set both protocols in order of FCAP and then DH-CHAP: switch:admin> authutil --set -a all Authentication is set to fcap,dhchap. To set DH group 3: switch:admin> authutil --set -g 3 DH Group was set to 3. To set all DH groups to be specified in the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 69
Authentication Policy: PASSIVE Device Authentication Policy: OFF switch:admin> authutil --set -h sha1 Hash is set to sha1. switch:admin> authutil --show AUTH TYPE HASH TYPE GROUP TYPE fcap,dhchap sha1 1 Switch Authentication Policy: PASSIVE Device Authentication Policy: OFF portShow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 70
enter the banner text using the banner operand, the valid length is 116 characters. Examples To set a new banner for a switch: switch:admin> bannerset "My banner" switch:admin> bannerSet Please input context of security banner (press "." RETURN at the beginning of a newline to finish input): Do - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 71
Use this command to display the contents of the banner. Operands none Examples To display the banner for a switch: switch:admin> bannershow Banner: Do not log into this switch if you are not an authorized administrator. See Also bannerSet Fabric OS Command Reference 45 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 72
broadcast group (always 256). Member Ports A map bit in each row representing port 0, 32, 64, and so on. Note The output from this command may vary, depending on the hardware platform. Operands none Examples To display the broadcastshow routing information for all ports in the switch: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 73
blade. Beaconing mode only takes over the port LEDs; it does not change the switch's functional behavior. The normal flashing LED pattern (associated with an active, faulty, or disabled port, for example) is suppressed and only the beaconing pattern is displayed. If a diagnostic frame-based - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 74
this blade, the remaining switches reconfigure, and this switch will configure based on the other blade ports. The blade must be disabled before making configuration changes or before running many of the diagnostic tests. The blade does not need to be disabled before rebooting or powering off - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 75
ports, unlighted for disconnected ports, or amber for ports that do not initialize. Notes A blade cannot be disabled or enabled when the switch is disabled or when the blade itself is faulted, powered off, or running diagnostics. Persistently disabled ports are not enabled by this command. The - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 76
2 bladeEnable See Also 2 UNKNOWN VACANT 3 UNKNOWN VACANT 4 SW BLADE 2 ENABLED 5 CP BLADE 1 ENABLED 6 CP BLADE 1 ENABLED 7 SW BLADE 2 ENABLED 8 UNKNOWN VACANT 9 UNKNOWN VACANT 10 UNKNOWN VACANT bladeDisable, portDisable, portEnable, switchShow 50 Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 77
is required: slotnumber Specify a nonzero value for the slot number from which to clear burn-in errors. Examples To clear burn-in errors from slot 2: switch:admin> burninerrclear 2 See Also burninErrShow Fabric OS Command Reference 51 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 78
is required: slotnumber A nonzero value that specifies the slot number from which to display burn-in errors. Examples To display burn-in errors from slot 2: switch:admin> burninerrshow 2 See Also burninErrClear 52 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 79
other than 0, this command behaves as follows: 1. The diagnostic daemon program performs burn-in testing in place of the power-on self-test (POST) phase II each time a switch blade is powered on. 2. The burn-in test stores errors on the local persistent error storage on which the error occurs. For - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 80
Use this command to display the burn-in status of blade in a specified slot. Command output includes the slot number for all slots are displayed. Examples To display the burn-in status for all slots: switch:admin> burninstatus Slot State Status Run 1 ABORT PASS 3 2 ABORT PASS 3 3 ABORT - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 81
in effect. The devices that an initiator sees are based on this configuration. The effective configuration is built when enabled. Operands none Examples To display the effective zone configuration information: switch:admin> cfgactvshow Effective configuration: cfg: c4 zone: z3 33:07 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 82
to add one or more members to an existing zone configuration. This command changes the Defined Configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to take effect, enable the configuration with the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 83
command to commit the transaction and then disable and clear the zone configuration in nonvolatile memory for all the switches in the fabric. If no current zoning configuration exists, use the cfgSave command. If the default zone access mode is "No Access", then this command re-creates the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 84
(see cfgShow). For the change to become effective, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. Notes When FCS policy is enabled, this command can be issued only - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 85
to nonvolatile memory with the cfgSave command. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operand is required: "cfgName" Specify a name for the zone configuration to be deleted, in quotation marks. Examples To delete - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 86
in the fabric when this command is run, the transaction on the other switch is automatically aborted. A message displays on the other switches to indicate that the transaction was aborted. If the default zone access mode is "No Access", then this command becomes cfgEnable "d_efault_Cfg". Refer - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 87
a description of defined and effective configurations. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operand is required: "cfgName" Specifies the name of the zone configuration. The name must be enclosed in quotation marks - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 88
or disabling safezoning or default zoning on one switch in the fabric enables or disables the specific feature fabric-wide, meaning that the feature is disabled or enabled on all switches in the fabric. Note This command is effective only when the Brocade switch or director is in McDATA fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 89
(see cfgShow). For the change to become effective, enable the configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. Note When FCS policy is enabled, this command can be issued only - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 90
configuration to nonvolatile memory in all switches in the fabric. The saved configuration is automatically reloaded at power on, and, if a configuration cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgShow, cfgTransAbort, cfgTransShow 64 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 91
effective when the Brocade switch/director is in McDATA switch:admin> cfgShow Default Zone: OFF Safe Zone: OFF Defined configuration: cfg: switch set switch1; sqitch2; switch3; switch4 zone: switch1 dd:dd:dd:dd:aa:aa:aa:aa; bb:bb:bb:cc:cc:cd:dd:dd zone: switch2 23:34:87:23:50:72:35:07; 12,64 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 92
. The devices that an initiator sees in the fabric are based on this configuration. The effective configuration is built when a specific contents of nonvolatile memory. The default value is 0. Examples To display all zone configurations that start with "Test": switch:admin> cfgshow "Test*" cfg - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 93
: Red_zone 1,0 21:00:00:20:37:0c:76:85 21:00:00:20:37:0c:71:df To display only configuration names: switch:admin> cfgshow "*" cfg: USA1 Blue_zone cfg: USA_cfg Red_zone; Blue_zone See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgTransAbort, cfgTransShow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 94
of defined and effective Admin Domain configurations. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operand is optional: integer If a nonzero integer is specified, the size of the nonvolatile memory allocated for the zone - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 95
AD Name: AD0, State=Active): committed - 242 bytes transaction - 0 bytes cfgsize Info for AD Number:1 (AD Name: AD1, State=Active): committed - 16 bytes transaction - 0 bytes cfgsize Info for AD Number:2 (AD Name: AD2, State=Active): committed - 4 bytes transaction - 0 bytes cfgsize Info for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 96
remains open and unaffected. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands When invoked without operand, this command aborts the current transaction. The following operand is optional: token Specify the token ID of the transaction to - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 97
admin> cfgclear Do you really want to clear all configurations? (yes, y, no, n): [no] y Clearing All zoning configurations... switch:admin> cfgtransshow Current transaction token is 271010736 It is abortable See Also cfgAdd, cfgClear, cfgCreate, cfgDelete, cfgDisable, cfgEnable, cfgRemove, cfgSave - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 98
currently configured as Option 1 (a single 128-port switch with Brocade blade IDs 4 and 17 and CP blade IDs 5 and 16), both CP blades should always contain firmware that supports this command. Use of earlier versions adversely affects switch operation. Because this is a disruptive operation and has - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 99
a list of all valid options. Examples To display the current configuration option on a Brocade 48000 director and to change the option: switch:admin> chassisconfig Current Option: 5 All Supported Options Option 5: One 384-port switch Blade ID's 17, 18, 24, 31, 33, 36, 39, 37, 51, 55 in slots - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 100
, underscore or hyphen characters. This operand is optional; if omitted, the current chassis name displays. Examples To change the chassis name to "dilbert": switch:admin> chassisname dilbert switch:admin> chassisname dilbert See Also switchName 74 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 101
FAN, POWER SUPPLY, SW BLADE (switch), CP BLADE (control processor), WWN (World Wide Name), or UNKNOWN. Object number: Slot nn (for blades), mm Year: yyyy 9 Cumulative time, in days, that the FRU has been powered on: Time Alive:dddd days 10 Current time, in days, since the FRU was last powered - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 102
-180 60-0001532-03 1013456800 Day: 12 Month: 6 Year: 2001 Day: 15 Month: 7 Year: 2001 28 days 16 days 555-374757 234-294-12345 2734658 A.00 CP BLADE Slot: 6 Header Version: Power Consume Factor: Factory Part Num: Factory Serial Num: Manufacture: Update: Time Alive: Time Awake: ID: Part Num: Serial - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 103
command history. Synopsis clihistory Description This command saves the following information whenever a command is executed on the switch: • Timestamp • Username • IP address of the Telnet session • Options • Arguments This command displays the local CLI command history. This command cannot - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 104
Ethernet Link Mode Refer to the configure command for more information on default values for configuration parameters. Notes This command cannot be executed on an enabled switch. You must first disable the switch using switchDisable. Some configuration parameters are cached by the system. To avoid - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 105
See Also snmpConfig, configure, switchDisable, switchEnable configDefault 2 Fabric OS Command Reference 79 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 106
configDownload command supports DNS names, necessary. The SSH service is available on Guide for details regarding upload and download behavior The download might fail for some of the following reasons: • The switch switch before proceeding. • The host name is not known to the switch. • The host IP - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 107
and the switch's identity cannot be changed by configDownload. Parameters such as the switch name and IP address are ignored support IPv6. Once a configuration file has been uploaded to an external system, it must NOT be manually edited before being downloaded, either to the same or another switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 108
"host" A host name or IP address in quotation marks: for example, "citadel" or "192.168.1.48". The configuration file is downloaded chassis that has been disabled prior to downloading the configuration file: switch:admin> switchdisable switch:admin> configdownload Protocol (scp, ftp, local, or usb) - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 109
a list of configuration files stored on the local chassis: switch:admin> configlist -local config.txt config2.txt next_cfg.txt 25679 25679 20977 2007 Jan 02 15:16 2007 Jan 06 15:16 2007 Jan 18 15:16 See Also configDownload, configUpload, configShow, configRemove Fabric OS Command Reference - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 110
be removed. If the -file option is omitted, the command prompts you to specify a file name. Examples To remove a configuration file from the local chassis: switch:admin> configremove -local first_config.txt To remove a configuration file from an attached USB device without specifying a filename - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 111
Use of wildcards and other common regular expression operators is not supported. Some configuration settings do not display when filtered. If in the contents of the configuration file: switch :admin> configshow -local File Name [config.txt]: config.txt [Switch cp7 Configuration uploaded on Aug 07 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 112
b0:db boot.device:eth0 boot.gateway.ipa:10.33.32.1 [LicensesDB] 6122B8EE0FBB440F46E124E97B16277D6122B8EE0FBB440F0073B7A57B16277D6F61 [DMM_WWN] [Licenses] [Chassis Configuration] To display selected content of the local configuration file: switch:admin> configshow -local config.txt -pattern "passwdcfg - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 113
an upload can occur. The configUpload command supports DNS names, and also IPv4, and IPv6 prompts for the password if necessary. The SSH service is available on both Unix and Windows hosts. • The host name is not known to the switch. • The host IP address cannot be contacted. • The user does not - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 114
does not support IPv6. For Admin Domain users, refer to the Fabric OS Administrator's Guide for manually edited before being downloaded, either to the same or another switch it defaults to FTP. "host" A host name or IP address in quotation marks, for example, "citadel" or "192.168.1.48". The - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 115
that "host" is not required when -local or -USB is specified. To upload a configuration file interactively from the local chassis: switch:admin> configupload Protocol (scp, ftp, local, or usb) [ftp]: local File Name [config.txt]: Overwrite previous file (Y/N)? [N]: y configUpload complete: All - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 116
Services Settings • Portlog Events enable or disable Settings • Secure Socket Layer (SSL) attributes • Remote Procedure Call Daemon (RPCD) attributes • cfgload attributes • Webtools attributes • System settings Notes To access all parameters controlled by this command, you must disable the switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 117
) Field Type Default Range Domain R_A_TOV E_D_TOV WAN_TOV MAX_HOPS Data Field Size Sequence Level Switching Disable Device Probing number boolean 1 10000 2000 0 7 2112 0 0 0 0 0 16 0 varies E_D_TOV * 2 to 120000 1000 to R_A_TOV / 2 0 to R_A_TOV / 4 7 to 19 256 to 2112 0 or 1 0 or 1 0 or 1 0 or - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 118
By default, the switch can send Class F frames. When this option is turned on, Class F traffic is converted to Class 2 traffic before being transmitted. Per-frame Route Priority In addition to the eight virtual channels used in frame routing priority, support is also available for per-frame-based - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 119
values. TABLE 4 F_Port login parameters (* = multiplication symbol) Field Type Default Range Maximum logins per switch Number Maximum logins per port Logins per second Login stage interval (milliseconds) Number Number Number 16 * the max 1 to 126 * the number of ports max number of ports - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 120
mode values fields. TABLE 6 RSCN transmission modes Field End-device RSCN Transmission Mode Domain RSCN to End-device for switch IP address or name change Type number number Default 1 0 Range 0 to 2 0 to 1 End-device RSCN Transmission Mode values are as follows: 0 RSCN only contains single PID - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 121
, regardless of the presence or absence of new or pre-existing devices. System Services Settings Settings affecting System Services are described inTable 8. TABLE 8 Disable RLS probing Field Type Default Disable RLS probing Boolean off Range off or on Disable RLS probing Enables or - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 122
Default 0x0 Range 0x0 to 0xffff system.blade.bladeFaultOnHwErrMsk If this field is set to a value other than 0, then any nonfatal HW ASIC data parity error causes the problem blade to be powered off. Examples To enable signed firmware download on a disabled switch: switch ] System services (yes, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 123
. Examples To display sample data streams you can use with diagnostics: switch:admin> datatypeshow Pattern type example BYTE_FILL WORD_FILL QUAD_FILL BYTE_NOT WORD_NOT QUAD_NOT BYTE_RAMP 01 02 05 0b 17 2f 5e bd 7b f6 ec d8 b0 60 c0 11 55 16 fc d7 17 65 a9 87 5f 44 be 5a d0 de bc a5 12 bc - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 124
switch is forwarded to the principal switch and distributed to the fabric. It may take up to 64 seconds for the switches support. If the switch is operating in FICON Management Server mode (fmsmode), setting the date is subject to the director mm switch:admin> date Fri Jan 29 17:01:48 UTC 2007 switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 125
the debug and verbosity levels. Module names are case-sensitive. This operand is optional. Examples To display information about a specific module named NS: switch:admin> dbgshow NS Module NS, debug level = 1, verbose level = 1 See Also setDbg Fabric OS Command Reference 99 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 126
of cfgEnable d_efault_Cfg. • If zoning receives a cfgDisable command from a remote switch that does not support default zoning, zoning rejects the cfgDisable command in the second phase of RCS because the remote switch does not convert the cfgDisable command to cfgEnable d_efault_Cfg. 100 Fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 127
command to commit the changes and distribute them to the fabric. If a cfgSave is performed and the fabric is already in the No Access default zone state, a cfgDisable is sent to the fabric. For example: primaryfcs:admin> defzone --allaccess primaryfcs:admin> cfgsave --show An audit log record is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 128
designed to operate on fixed-port-count products. -all If specified, all blades clear. If no operand is specified, the default is to clear all bad port flags. Examples To clear the diag software flag: switch:admin> diagclearerror 8 ERROR: DIAG CLEARERR Diagnostics Errors Cleared, port: 8/31 Err - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 129
Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To disable the POST during future power ons: switch:admin> diagdisablepost Config update Succeeded Diagnostic POST is now disabled. See Also diagEnablePost Fabric OS Command Reference 103 53 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 130
Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To enable the POST during future power ons: switch:admin> diagenablepost Config update Succeeded Diagnostic POST is now enabled. See Also diagDisablePost 104 Fabric OS Command Reference 53 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 131
underlying hardware and are intended for support personnel only. Contact support if you want to use these operands. Operands none Examples To display diagnostic command information: switch:admin> diaghelp bladepropshow chippropshow display blade properties (***internal take out) display chip - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 132
a reboot to take effect. POST mode modifies the behavior of the diagnostics daemon program to inhibit testing of switch blades when the system is first powered on or a new blade is added. To enable or disable diagnostic POST, the recommended method is to use diagEnablePost and diagDisablePost. Note - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 133
to take effect. Retry mode modifies the behavior of the diagnostic test methods, power-on self-test (POST), and burn-in scripts. The exact behavior depends on is displayed. Examples To view the current retry mode value: switch:admin> diagretry -show Diagnostic Retry Mode is currently enabled. See - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 134
available from the burninErrShow command on a per-blade basis. When power cycles occur, the burn-in activity is restarted at the test the current burn-in script. Examples To set the burn-in script and mode: switch:admin> diagsetburnin --slot 1 -current existing script is: /fabos/share/switchess.sh - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 135
Using the full parameters, variables can be updated noninteractively. In interactive mode, the current value, default value, update. Examples To update diagnostic command parameters: switch:admin> diagsetcycle switchburnin.sh -show CURRENT - KEYWORD : DEFAULT 1 - number_of_runs : 1 2 - vib - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 136
default value is 0. Notes The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Examples To display diagnostic status on a switch blade: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 137
used to skip the execution of certain POSTs that might prove hazardous to normal switch operation. The exact use of this flag is determined by the POST scripts details. Operands This command has the following operands: value Specify a bit mask for tests to skip. -show If specified or no value - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 138
this command to determine which PID is running burn-in on a blade and terminate that activity. The burn-in script handles the logging executes on all slots in the logical switch. This operand is optional. Examples To stop burn-in mode on a switch: switch:admin> diagstopburnin --slot 1 No burn-in - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 139
the debug and verbosity levels. Module names are case-sensitive. This operand is optional. Examples To display information about a specific module named NS: switch:admin> dbgshow NS Module NS, debug level = 1, verbose level = 1 See Also setDbg Fabric OS Command Reference 113 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 140
Server Policy IPFILTER IP-Filter Policy Each supported database has a switch-local configuration parameter that switch domain numbers • switch names • switch WWNs A wildcard (*) may be specified to include all switches in the fabric that support the distribute feature. Switches running firmware - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 141
Password database to all domains in the fabric that support the distribute feature: switch:admin> distribute -p "FCS;PWD" -d "*" To distribute the AUTH and FCS policies to all switches in the fabric that run v5.3.0 or later: switch:admin> distribute -p "AUTH;FCS" -d "*" To distribute the AUTH and - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 142
change occurs. Refer to dlsSet for a full description of load sharing. This command should be Command Availability" for details. DLS is not supported in certain routing policies. Refer to aptPolicy load sharing option: switch:admin> dlsreset Committing configuration...done. switch:admin> dlsshow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 143
on DLS when a fabric change occurs. Routing is based on the incoming port and the destination domain. This means is not supported in certain routing policies. If supported, the DLS option is on by default. Refer to dynamic load sharing option: switch:admin> dlsset switch:admin> dlsshow DLS is set - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 144
to dlsSet for a description of load sharing. Notes DLS is not supported in certain routing policies. Refer to aptPolicy for more information on routing . Operands none Examples To display the current DLS option setting: switch:admin> dlsshow DLS is set See Also dlsSet, dlsReset 118 Fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 145
remove the domain name service parameters. The domain name service parameters are the domain name and the name server IP address for primary To set the DNS parameters for the system: switch:admin> dnsconfig Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration 3 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 146
to display attributes of the switch enclosure. Supported attributes include the vendor-specific enclosure identifier and the identifier of the enclosure interface to which the switch is attached. This command is only meaningful for products that are embedded in a blade server or storage chassis - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 147
instances on this control processor (CP). Synopsis errclear Description Use this command to clear all internal and external error log messages for all switch instances on this CP. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 148
operand is optional. Examples To display the start and end delimiters: switch:admin> errdelimiterset delimiter start string: delimiter end string: See Also To change the start and end delimiters (with sample output): switch:admin> errdelimiterset -s "Start" -e "End" Start2003/03/10-09:54 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 149
, the messages display in the normal order. -p Displays error logs from Fabric OS versions prior to v4.2. Examples To display the error log without pagination: switch:user> errdump Version: 4.4.0 2004/07/14-22:24:08, [HAMK-1003], 1,, INFO, switch1, Heartbeat up 2004/07/14-22:24:47, [FSSM-1002 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 150
set a filter for an error log destination. A filter is set based on the severity level of the messages. If no parameters are specified, "ERROR", or "CRITICAL". Examples To display the current filter settings: switch:admin> errfilterset console: filter severity = WARNING See Also To set the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 151
error log modules. Operands none Examples To display a list of all defined error log modules: switch:user> errmoduleshow Module IDs: 1 KT 2 UT 5 LOG 6 CDR 9 PIXE 10 EGR 4 KTRC 8 PISP 12 PIC 16 AUTH 20 CER 24 CONF See Also errDump, errShow Fabric OS Command Reference 125 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 152
display in the normal order. -p Displays error logs from Fabric OS versions prior to v4.2. Examples To display the error log with pagination: switch:user> errshow Version: 4.4.0 2004/07/14-22:24:08, [HAMK-1003], 1,, INFO, switch1, Heartbeat up Type to continue, Q to stop: 2004 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 153
exit command is an accepted synonym for logout, as is typing Ctrl-D at the beginning of a line. Operands none Examples To exit from a shell session: switch:admin> exit Connection to host lost. See Also logout Fabric OS Command Reference 127 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 154
2 fabPortShow fabPortShow Displays fabric port information. Synopsis fabportshow [slotnumber/]portnumber Description Use this command to display the state of a port, relative to the fabric, as well as a list of pending commands. The following information displays: Port The port number. State - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 155
Segmented due to E_Port isolation nbrWWN Neighboring switch's WWN nbrPort Neighboring switch's port lr_tid Link reset timer identifier and details. Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port to display - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 156
2 fabPortShow Examples See Also To display fabric port information: switch:admin> fabportshow 4/14 Fabric Port Information Port: State: List: List Count: Flags: nbrWWN: nbrPort: lr_tid: red_ports: 10 11 62 63 62 P3 0x10068418 0 0x280120 10: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 157
for fabric application (not a SW_ISL) GRE Get Route Entry ECP Exchange Credit Parameters Operands none Examples To display the retry count of Fabric OS commands: switch:user> fabretryshow SW_ILS E_Port ELP EFP HA_EFP DIA RDI BF FWD EMT ETP RAID GAID ELP_TMR GRE ECP - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 158
Clears the fabric log. -d | --disable Disables the fabric log. By default, the fabric log is enabled. -e | --enable Enables the fabric log to be at least 2 and a power of 2; otherwise, the command fails. Examples To change the number of entries: switch:admin> fabriclog -s Time Stamp Input and - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 159
fabricLog 2 See Also switch:admin> fabriclog -r 64 Warning: This command will clear the logs. Are your sure you want to do the resize [y/n]? y switch:admin> fabriclog -s Time Stamp Input and *Action S, P Sn,Pn Port Xid fabPortShow, fabStatsShow Fabric OS Command Reference 133 53- - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 160
mode. Synopsis fabricprincipal [-fhq] [mode] Description Use this command to set principal switch selection mode for the switch. The implementation of the fabricPrincipal command is based solely on mechanisms specified in the Fibre Channel standards. These mechanisms provide a preference - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 161
the static IP address displays. FC IP Addr The switch FC IP address. Name The switch symbolic name. An arrow (>) indicates the principal switch. FC Router IP Addr The IP address of the FC router. This field is empty if the switch is not an FC Router or it the FC Router does not support it. FC - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 162
10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60" The Fabric has 2 switches. To show additional details of the FC Router, if present: switch:admin> fabricshow -m Switch ID Name ENET IP Addr FC Router FC Router IP Addr Name 1: fffc01 fcr_sprint_01 10.33.59.224 160: fffca0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 163
fabstatsshow Description Use this command to display the statistics for the fabric. The following information is displayed: • Number of times a switch domain ID has been forcibly changed • Number of E_Port offline transitions • Number of fabric reconfigurations • Number of fabric segmentations as - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 164
2 fabStatsShow Sec Incompatibility: 0 Sec Violation: 0 ECP Error: 0 Duplicate WWN: 0 Eport Isolated: 0 See Also fabRetryShow 138 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 165
Fabric Switch State Structure Information State: D0 Stage: warm done Rdi Receive Timer: 0x10069400, IDLE STATE Unconfirmed Sw Timer: 0x10069508, IDLE STATE NTP Timer: 0x100695b8, IDLE STATE ME Timer: 0x10069610, IDLE STATE Principal Domain: 2 Upstream Port: 64 Principal - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 166
RPM speed to 0. Notes This command is not available on non-bladed systems except for the Brocade 4100 and 4900. The execution of this command is subject to Admin the fan unit to disable. Examples To disable a fan unit: switch:admin> fandisable 1 Fan unit 1 has been disabled See Also fanEnable - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 167
fan unit back to the default RPM speed. Notes This command is not available on non-bladed systems except for the Brocade 4100 and 4900. The execution Specify the fan unit number to enable. Examples To enable a fan unit: switch:admin> fanenable 1 Fan unit 1 has been enabled See Also fanDisable, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 168
case, the last known fan speed is displayed. The output from this command varies depending on switch type and number of fans present. Operands none Examples To display information on the fans in the system: switch:admin> fanshow Fan #1 is OK, speed is 2721 RPM Fan #2 is OK, speed is 2657 RPM - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 169
same as reboot. Notes This command is not available on non-bladed systems except for the Brocade 4100 and 4900. The execution of this command is subject to To reboot the Control Processor without executing power-on self test (POST) on startup: switch:admin> fastboot See Also diagDisablePost, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 170
command is supported only on the Brocade FC-IP/FC Router blade (FR4-18i) on a Brocade 7500, 48000 switch:admin> fastwritecfg --enable 7 !!!! WARNING !!!! Enabling this feature requires power-cycling of the affected blade to take effect and may take up to 5 minutes to complete. Non-bladed switches - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 171
To disable FC fastwrite: (Y,y,N,n): [ n] See Also switch:admin> fastwritecfg --disable 7 !!!! WARNING !!!! Disabling this feature requires power-cycling of the affected blade to take effect and may take up to 5 minutes to complete. Non-bladed switches will be rebooted. In all cases, data traffic - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 172
supported only on Brocade FR4-18i blades and Brocade 7500 platforms. Operands This command has the following operands: --slot slotnumber Specifies the slot number on which the diagnostic operates. The default all tests on slot 7 and GbE port 1: switch:admin> fcipchiptest --slot 7 -unit 1 -testtype - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 173
fcipChipTest 2 Diagnostics When a failure is detected, the test might report one or more of the following error messages: CHIP_TEST_ERR CHIP_TEST_CHIP_INIT_ERR CHIP_TEST_IMAGE_VER_ERR CHIP_TEST_TIMEOUT_ERR CHIP_TEST_HEARBEAT_ERR CHIP_TEST_INVALID_RESULT See Also fcipPathTest Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 174
commands require an FCIP license. Operands none Examples To display FCIP command information: switch:admin> diaghelp fciphelp fastwritecfg portcfg portcmd portshow Configure FC fastwrite feature Create/Delete a new ip interface/route/arp entry or fcip tunnel on the GigE port Execute commands - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 175
Command Availability" for details. This command is supported only on Brocade FR4-18i blades and Brocade 7500 platforms. Operands This command has the following operands: --slot slotnumber Specifies the slot number on which the diagnostic operates. The default is 0 and operates on fixed-port-count - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 176
to select or to bypass data compression for the test. By default, data compression is used. This setting is applicable only to Examples To run the test on slot 2 with PHY loopback sending 10 frames: switch:admin> fcippathtest --slot 2 -path 2 -nframes 10 Running fcippathtest Test Complete: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 177
:83:f9:39 Target Pid: 144e8 Number of LUNs returned by query: 1 LUN ID: 0x00 To display the LUN information of a list of port WWNs: switch:admin> fclunquery -w 20:00:00:04:cf:5d:cf:0e Target Index: 1 Target Node WWN: 20:00:00:04:cf:5d:cf:0e Target Port - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 178
Service specified as a 24-bit Fibre Channel port supported on all devices. In such cases, the response could be either an ELS reject or a request timeout. By default 16 "pad" bytes, which are used to fill out the request frame payload sent. This is useful for diagnosing data-dependent problems - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 179
that accepts the request and another device that rejects the request: switch:admin> fcping 10:00:00:00:c9:29:0e:c4 21 one device that accepts the request and another device that does not respond to the request: switch:admin> fcping 0x020800 22:00:00:04:cf:75:63:85 Source: 0x20800 Destination: 22 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 180
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To clear the FCPD debug information log: switch:admin> fcplogclear See Also fcpLogDisable, fcpLogEnable, fcpLogShow 154 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 181
chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To disable the FCPD debug information log: switch:admin> fcplogdisable See Also fcpLogClear, fcpLogEnable, fcpLogShow Fabric OS Command Reference 155 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 182
Protocol daemon (FCPD) logging. Debug information logging is enabled by default. Note The execution of this command is subject to Admin Domain Operands none Examples To enable the FCPD debug information log: switch:admin> fcplogenable See Also fcpLogClear, fcpLogDisable, fcpLogShow 156 Fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 183
1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To display the FCPD debug information log: switch:admin> fcplogshow Time Stamp Event Port file&lineno arg0 arg1 arg2 arg3 arg4 08:20:12.274 FlshOrProbe 0 1 536 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 184
by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is required. Examples To display the FCP probe information: switch:admin> fcpprobeshow 4/4 port 52 is L-Port and it is online. nodes probed - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 185
(/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is required. Examples To display the FCP RLS information: switch:admin> fcprlsshow 2/5 0xda 0xdc link fail 0 0 loss sync 5 3 loss sig 0 0 prtc err - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 186
display the current configuration. If no operands are specified, this command displays the usage. By default, frame forward option is enabled. Use the --show option to display the current settings on the switch. Note The execution of this command is subject to Admin Domain restrictions that may be - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 187
To display the new configuration: switch:admin> fcrbcastconfig --show Broadcast configuration is disabled for: fid 2 fid 128 SEE ALSO bcastshow, portRouteShow fcrBcastConfig 2 Fabric OS Command Reference 161 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 188
bit in register N is reached (0x80000000 for a 32-bit register). For example, a 6-bit supported only on Brocade FR4-18i blades and Brocade 7500 platforms. Operands This command has the following operands: --slot slotnumber Specifies the slot number on which the diagnostic operates. The default - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 189
fcrChipTest 2 switch:admin> fcrchiptest --slot 7 -unit 1 -testtype 0 Running fcrchiptest Test Complete: fcrchiptest Pass 1 of 1 Duration 0 hr, 0 min & 4 sec (0:0:4:351). passed. Diagnostics See Also When a failure is detected, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 190
fabric ID uniquely identifies a fabric in FC Router configurations. The backbone fabric is the fabric attached to the U_Ports-for example, E/F_Ports-of this switch. The backbone fabric ID must be unique across all FC Router-connected fabrics. The current Backbone Fabric ID can be displayed using the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 191
Router backbone fabric. The existing syntax is maintained for IPv6 support. When IPv6 addresses are not configured, the output of fcrFabricShow Dom ID: 2, Info: 10.32.66.220, 220::10:32:66:220 "sw220n" EX_Port FID Neighbor Switch Info (enet IP, WWN, name) 16 80 10.32.66.180 10:00:00:05:1e - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 192
switch, if there is a different maximum LSAN count on the switches throughout the meta-SAN switches in the same backbone that support this feature. Verify the configured maximum limit against the LSANs configured using the fcrResourceShow command. Note The default to a firmware version lower than - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 193
. For example, if edge fabric FIDs 1, 2, 3, 4, 5 are online, the default is that all edge fabrics have two-way communication. In the case where 1 and therefore, to enter the same information for all the FCR switches in the backbone that support this command. This command is also used to specify FC - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 194
memory (CLI command with no option). • Display the static and default/dynamic binding of the backbone to show which edge fabrics or FCRs can add the LSAN Zone Matrix data: switch:admin > fcrlsanmatrix --add 4 5 switch:admin > fcrlsanmatrix --add 4 7 switch:admin > fcrlsanmatrix --add 10 14 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 195
default/dynamic binding in the backbone where online fabrics are: 1, 2, 4, 5, 7, 8, 10: switch switch:admin > fcrproxydevshow -a Proxy WWN Created in Fabric Proxy PID Device Physical Exists PID in Fabric State 52 10:00:00:06:2b:0e:4d:e5 01f001 52 10:32:16:90:28:dd:d0:03 0bf001 52 10:32:16 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 196
2 fcrLsanMatrix 78 10:32:16:91:25:dd:d0:03 82 10:00:00:06:2b:0d: Make sure that all legacy FCR switches in the backbone support the matrix merge feature, otherwise the feature is not supported. • Use fcrlsanmatrix --fabricview -lsan | -fcr to confirm that all the switches in the backbone have the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 197
conflicting devices. Error message (2): "There may be other FCR switches in the backbone that do not support the LSAN Binding feature or do not have the same switches to confirm that the shared edge fabric FIDs have the same access in both backbones. Refer to the Fabric OS Message Reference manual - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 198
2 fcrPathTest fcrPathTest Tests the data path connection between the FC Router FPGA and the central ASIC. Synopsis fcrpathtest [--slot slotnumber][-unit number][-path mode][-nframes count] Description Use this command to verify the data path connecting the FC Router field-programmable gate - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 199
Command Availability" for details. This command is supported only on Brocade FR4-18i blades and Brocade 7500 platforms. Operands This command has the following operands: --slot slotnumber Specifies the slot number on which the diagnostic operates. The default is 0 and operates on fixed-port-count - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 200
Routers on the same backbone fabric as this FC Router. The default output displays only physical device information relevant to this FC Router. are listed by fabric. The -f and -w operands allow searching for physical devices based on fabric ID or port World Wide Name. "No device found" is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 201
fcrPhyDevShow 2 Examples To display the physical devices relevant to this FC Router: fcr:admin> fcrphydevshow Device WWN Physical Exists PID in Fabric 2 10:00:00:00:c9:2b:6a:68 c70000 3 50:05:07:65:05:84:09:0e 0100ef 3 50:05:07:65:05:84:0b:83 0100e8 Total devices displayed: 3 See - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 202
is XXYYH, where XX specifies the translate domain area_ID (valid values include F0H through FFH) and YY specifies the PortID value or the low 8-bits of the proxy device address (valid values include 01H through 7FH). The address of the proxy device is derived from the PID format (for example - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 203
the specified edge fabric. Examples To display the persistent proxy device configuration: switch:admin> fcrproxyconfig Imported FID 002 002 002 002 003 Device WWN 50 00:11:22:33:44:55:66:77 from its persistent slot in fabric 5: switch:admin> fcrproxyconfig -r 5 00:11:22:33:44:55:66:77 WWN deleted - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 204
Routers on the same backbone fabric as this FC Router. The default output displays only proxy device information relevant to this FC Router. are listed by fabric. Search parameters -f and -w allow searching for proxy devices based on fabric ID or port WWN. "No proxy device found" is displayed if - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 205
fcrProxyDevShow 2 Examples To display the physical devices relevant to this FC Router: switch:admin> fcrphydevshow Device WWN Physical Exists PID in Fabric 2 10:00:00:00:c9:2b:6a:68 c70000 3 50:05:07:65:05:84:09: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 206
WWNs are not returned to the pool until the system reboots, because the phantom switch might still be accessible through other switches. Across the switch reboot, the allocation starts from the next usable WWN base from the pool and not from the beginning. Port Limits Displays resources for each - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 207
the resource usage for the local FC Router: switch:Admin> fcrresourceshow Daemon Limits: LSAN Zones: LSAN 32768 6446 Port Limits: Max proxy devices: 2000 Max NR_Ports: 1000 Currently Used(column 1: proxy, column 2: NR_Ports): 48 | 0 0 49 | 0 0 50 | 0 0 52 | 0 0 53 | 0 0 54 | 0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 208
router port path based on the default cost. For an EX_Port IFL, the default cost is 1000. For a VEX port, the default cost is 10000. If the cost is set to 0, the default the slot for bladed systems. Use switch:admin> fcrrouterportcost Port Cost 7/3 1000 7/4 1000 7/9 1000 7/10 1000 7/16 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 209
To display the cost of one EX_Port: switch:admin> fcrrouterportcost 7/10 Port Cost 7/10 1000 To set the cost of an EX_Port: switch:admin> fcrrouterportcost 7/10 10000 See Also switchShow, fcrRouteShow, portCfgEXPort fcrRouterPortCost 2 Fabric OS Command Reference 183 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 210
traffic between imported fabrics, creating a meta-SAN. There are FC Router ports that reside backbone/intermediate fabrics are currently not supported, an NR_Port provides a path to WWN of the Principal Switch in the Dest. Fabric The World Wide Name of the principal switch in the destination - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 211
is the preferred domain ID. You can set the preferred domain ID when the translate domain is not active and is persistently saved. The principal switch attempts to provide the translate domain with the requested domain ID, but might not provide it if there are domain ID conflicts with other domains - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 212
:0f:05 To set the preferred domain ID of the translate domain created in fabric 2 that represents remote fabric 3 to a value of 8: switch:admin> fcrxlateconfig 2 3 8 xlate domain already configured, overwrite?(n) y To clear the preferred domain ID of the translate domain created in fabric 2 that - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 213
Supported policies are Switch Connection Control (SCC), Device Connection Control (DCC), Password (PWD), Fabric Configuration Server (FCS), Fabric Element Authentication (AUTH), and IP fabrics" that include switches running firmware versions earlier than v6.0. If a v5.3/5.2 switch joins a fabric that - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 214
set should be of the form "SCC:S;DCC;FCS". To set the fabric-wide policy to NULL (default) or no fabric-wide consistency, use the policy Set "". Supported policies are Switch Connection Control (SCC), Device Connection Control (DCC), and Fabric Configuration Server (FCS). All members specified in - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 215
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To display the FDMI cache: switch:admin> fdmicacheshow Switch entry for domain 3 state: known version: v310 wwn: 10:00:00:60:69:90:03:c7 HBAs: 10:00:00:00:c9 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 216
switch:admin> fdmishow Local HBA database contains: 10:00:00:00:c9:25:9b:96 Ports: 1 10:00:00:00:c9:25:9b:96 Port attributes: FC4 Types: 0x0001000001000000000000000000000000000000000000000000000000000000 Supported 3 2002, v5-2.11a2 **CT_TEST 1** Firmware Version: 03814101 OS Name and Version: Window - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 217
" entries are not removed from the RNID database. Examples To clear the RLIR database: switch:user> ficonclear RLIR successfully clear local RLIR Database. To clear the RNID database: switch:user> ficonclear RNID successfully clear not current entries from local RNID Database. See Also ficonHelp - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 218
bit value to be (1) set or not set (0). Valid values for bitname are POSC Programmed offline state control UAM User alert mode ASMA Active=saved mode DCAM Director 86 defaults to 80. Examples To enable FMS mode for the switch: switch:admin> ficoncupset fmsmode enable fmsmode for the switch is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 219
in the mode register for the switch: switch:admin> ficoncupset modereg ASM 1 Active=Saved Mode bit is set to 1 See Also To set the MIHPTO value to 60 seconds: switch:admin> ficoncupset MIHPTO 60 MIHPTO has been changed to 60 seconds ficonCupShow ficonCupSet 2 Fabric OS Command Reference 193 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 220
the FICON Management Server (FMS) mode for the switch. modereg Display the FICON-CUP mode register. If no operand is specified, all mode register bit settings are displayed. If a mode register bit name is specified, then only the value of that bit is displayed. A value of 1 indicates that a given - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 221
To display the ASM bit in the mode register for the switch: switch:user> ficoncupshow modereg ASM ASM --1 See Also To display the MIHPTO value for the CUP: switch:user> ficoncupshow MIHPTO MIHPTO for the CUP: 60 seconds ficoncupset ficonCupShow 2 Fabric OS Command Reference 195 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 222
commands. Synopsis ficonhelp Description Use this command to display a list of FICON support commands with descriptions. Operands none Examples To display a list of FICON commands: switch:admin> ficonhelp ficonclear Clears contents of the specified FICON management database ficoncupset - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 223
current. 0x40 Indicates the node ID of the storage port for the RNID switch for RLIR is not valid. 0x50 Indicates the node ID of the channel port following: WWN card [unit number] The WWN card. Power Supply [unit number] The Power Supply card. Hardware Slot [unit number] The Hardware Slot - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 224
increases by 1 for each incident within the individual switch. Link Incident Description Same as Link Incident Type incident type as one of the following: • Bit-error-rate threshold exceeded • Loss of signal or FC-4 support not specified. 0xa0 Reserved. 0xc0 Reserved. 198 Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 225
Full screen if it is a storage port; otherwise, a reserved field for a channel port. 0x08 Terminal - Line mode if it is a storage port; otherwise, an emulated control unit support only. 0x09 Reserved. 0x10 Switch, if it is a switch the switch chassis part number. PID Displays the 24-bit Fibre - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 226
switch serial number. Switch node WWN Displays the switch node World Wide Name. Switch Port WWN Displays the switch port World Wide Name. Switch WWN Displays the switch Node WWN flag Parm 0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca 0x10 0x200110 Type number: 002064 Model - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 227
: 02 Sequence Number: 0000000169CA tag: 052e } } To display the local and remote LIRR database: switch:admin> ficonshow LIRR fabric {Fmt Type PID Listener Port WWN Switch Port WWN Listener Type 0x18 N 502b00 50:05:07:64:01:00:15:8d 20:2b:00:60:69:80:1e:4e Conditional 0x18 N 502e00 50:05 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 228
: 23000000602 FL2L0001071 {Listener Port Type Listener PID Listener Port WWN N 0x502b00 50:05:07:64:01:00:15:8d } } {FRU Failure [3]: Power Supply[4] failure occurred on Mon Jan 13 12:11:38 2003 Fmt Protocol Domain Fabric WWN Switch WWN 0x18 FICON 80 10:00:00:60:69:33:33:33 10:00 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 229
Power-up self tests are executed when the switch is powered on to check for the consistency of the algorithms implemented in the switch. Notes Certain services and . FIPS is not supported on all platforms. For FIPS-compliant hardware, refer to the Fabric OS Administrator's Guide. The execution of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 230
admin> fipscfg --enable selftests FIPS Selftests mode/status has been set to : Enabled/None To verify FIPS prerequisites: switch:admin>fipscfg --verify fips Standby firmware supports FIPS SELF tests check has passed Root account is enabled. Radius check has passed Authentication check has passed - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 231
To enable FIPS after prerequisites have been met: switch:admin> fipscfg --enable fips FIPS mode has been set to : Enabled Please reboot the system switch:admin> fipscfg --show FIPS mode is : Enabled See Also none fipsCfg 2 Fabric OS Command Reference 205 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 232
firmwareDownload completes successfully and the CP is rebooted, the system switches the primary partition (with the old firmware) to the secondary, and the secondary partition (with the new firmware) to the primary. The default behavior of the firmwareDownload command is to automatically run the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 233
versions. On enterprise-class platforms, this command, by default, downloads the firmware image to both CPs in rollover mode to prevent disruption to application services. This operation depends on HA support. If HA is not available, you can still upgrade the CPs one at a time using the -s option - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 234
single CP mode. This mode supports selectively enabling or disabling a full install, autoreboot, and autocommit on bladed and non-bladed systems. On enterprise-class platforms, this mode supports upgrading a single CP. When downloading the main Fabric OS firmware, this option disables autoreboot - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 235
firmware upgrades. This option allows firmwareDownload to continue even if HCL is not supported switches in the fabric. Examples To download the firmware to an HA switch over a network: switch:admin> firmwaredownload 192.168.166.30,johndoe,/pub/dist/release.plist,12345 The following BP blades - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 236
... Protocol selected: USB Trying address-->AF_INET IP: 127.1.1.8, flags : 2 System settings check passed. Checking version compatibility... Version compatibility check passed. This command will upgrade the firmware on both CP blades. If you want to upgrade firmware on a single CP only, please use - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 237
format, or is corrupted. • The FTP or SSH service is not running on host. • The platform is not supported by the firmware indicated. • The USB device may not be plugged in correctly. On standalone switches, the device must be plugged into the switch USB port. On enterprise-class platforms, the USB - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 238
The following example shows the status of the firmwaredownload for an SAS image to the blades in slot 2 and 7. switch:admin> firmwaredownloadstatus [1]: Thu Jul 28 00:30:49 2007 Slot 2 (SAS): Firmware is being downloaded to the blade. It may take up to 30 minutes. [2]: Thu Jul 28 00:30:49 2007 Slot - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 239
to verify the firmware versions. To display the status of a firmware download on a chassis: switch:admin> firmwaredownloadstatus [1]: firmware. [5]: Mon Dec 19 18:47:56 2007 Slot 8 (FR4-18i): Firmware is being downloaded to the blade. This step may take up to 10 minutes. [6]: Mon Dec 19 18:48 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 240
has started on both active and standby CPs. [15]: Mon Dec 19 19:01:38 2007 Slot 5 (CP0, active): Firmware commit operation has completed successfully on active CP. [16]: Mon Dec 19 19:01:39 2007 Slot 5 (CP0, active): Firmwaredownload command has completed successfully. Use firmwareshow to verify - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 241
integrity of firmware images when signed firmware validation is enabled. Notes A firmware key should be installed on every switch as a fails, signed firmware download fails. Refer to the Fabric OS Administrator's Guide for complete details on upgrading or downgrading firmware. The execution - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 242
, or, if the switch supports this option, from an attached USB device. A default firmware key is released as part of the firmware image and is downloaded to the switch during the firmware download process. The default key is used to download new firmware. However, the firmware key may be change - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 243
access. This operand can be omitted, if the firmware key is accessible on a local directory or by anonymous key using the interactive method: switch:admin> firmwarekeyupdate Server Name or IP Address: 192.168.21.34 device: switch:admin>Firmwarekeyupdate -U /usb/usbstorage/brocade/firmwarekey/pubkey - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 244
restore the former active firmware image: switch:admin> firmwarerestore Restore old image to be active ... Restore both primary and secondary image after reboot. The system is going down for reboot NOW !! Broadcast message from root (ttyS0) Fri Oct 26 23:48 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 245
Availability" for details. Operands none Examples To display the firmware versions in a Brocade director with FA4-18 blades installed in slot 2 and 7: switch:admin> firmwareshow Slot Name Appl Primary/Secondary Versions Status 2 FA4-16 FOS v6.1.1 v6.1.1 SAS v3.0.0 v3.0.0 DMM v3 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 246
minutes and try again. "FC Routing service is already enabled." This means that the FC Routing service is already enabled. iSCSI Enables the iSCSI service on the switch. By default, iSCSI is disabled. iSNSC Enables the iSNSC service on the switch. By default, iSNSC is disabled. 220 Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 247
enable the FC Routing service: switch:admin> fosconfig --enable fcr FC Routing service is enabled To enable the iSCSI service: switch:admin> fosconfig --enable iscsi iSCSI service is enabled To disable the iSCSI service: switch:admin> fosconfig --disable iscsi iSCSI service is disabled See Also - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 248
supported value, specifying the replacement of the WWN card. Examples To replace the World Wide Name card: switch to a power cycle, or CP failover, please follow the recovery procedure in Core Switch WWN Card the frureplace command and follow the instructions to complete the operation. Please enter - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 249
of the local switch is currently confirmed. Bit map of all the ISL. Bit positions correspond to the default areas of the ports. Bit 0 refers to default area of the switch, bit 1 refers to default area 1, and so forth. Bit map of all the trunk slave ports. Bit map of all the Fx_Ports. Bit map of all - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 250
2 fspfShow Examples To display FSPF protocol information: switch:admin> fspfshow version = 2 domainID = 131 switchOnline = TRUE domainValid = TRUE isl_ports[0] = 0x00000000 isl_ports[1] = 0x74000000 trunk_ports[0] = 0x00000000 trunk_ports[1] = 0x02000000 f_ports[0] = 0x00400000 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 251
to disable the alarms. If no operand is specified, the default value is 0 (alarms deactivated). This operand is optional. Examples To enable alarms in Fabric Watch: switch:admin> fwalarmsfilterset FW: Alarms are already disabled switch:admin> fwalarmsfilterset 1 FW: Alarms are already enabled See - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 252
Availability" for details. Operands none Examples To display the status of alarm filtering in Fabric Watch: switch:user> fwalarmsfiltershow FW: Alarms are enabled switch:user> fwalarmsfiltershow FW: Alarms are disabled See Also fwAlarmsFilterSet 226 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 253
Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To initialize all classes under Fabric Watch: switch:admin> fwclassinit fwClassInit: Fabric Watch is updating... fwClassInit: Fabric Watch has been updated. See Also fwConfigReload, fwConfigure, fwShow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 254
" and Appendix A, "Command Availability" for details. Operands none Examples To reload the saved Fabric Watch configuration: switch:admin> fwconfigreload fwConfigReload: Fabric Watch configuration reloaded See Also configDownload, configUpload, fwClassInit, fwConfigure, fwShow 228 Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 255
apply: 1. The Port class does not support VE _Ports and VEX_Ports, except for State Changes. 2. The E_Port class has the same port limitations as the port class except under the following condition: On a Brocade 48000 with a FR4-18i blade, or on the Brocade 7500, the E_Port class monitors the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 256
2 fwConfigure TABLE 12 Class fwConfigure Fabric Watch classes and areas Area Fabric E_Port E_Port downs Fabric reconfigure Domain ID changes Segmentation changes Zone changes FabricQL Fabric logins SFP state changes Link loss (E-port) Sync loss (E-port) Signal loss (E-port) Protocol error (E- - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 257
be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Not all platforms support fans or power supplies. If you attempt to configure values for these items the following displays: "ERROR: No threshold available. This command has - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 258
thresholds associated with a certain port. Examples To configure thresholds in Fabric OS mode: switch:admin> fwconfigure 1 : Environment class 2 : SFP class 3 : Port class class => : (1..12) [1] 1 1 : Temperature 2 : Fan 3 : Power Supply 4 : return to previous page Select an area => : (1..4) [4] 1 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 259
fwConfigure 2 3 : Power Supply 4 : return to previous page Select an area => : (1..4) [4] 1 Index ThresholdName Status CurVal LastEvent LasteventTime LastVal LastState 1 envTemp001 enabled 23 C inBetween Sat Oct7 10:01:53 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 260
and actions. Based on these switch:admin> fwfrucfg The current FRU configuration: Alarm State Alarm Action Slot 0 1 Power 16 Configurable Alarm Actions are: Errlog-1, E-mail-16 Slot Alarm State: (0..31) [0] 3 Slot Alarm Action: (0..17) [1] Power Supply Alarm State: (0..31) [0] Power - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 261
level to custom Set boundary & alarm level to default Show thresholds monitored or port persistence time Show sensor readings Set switch status policy parameters Show switch status policy parameters Show overall switch status Show switch temp readings See Also none Fabric OS Command Reference - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 262
. Switch elements monitored by Fabric Watch are divided into classes, and email alerts are based on the classes. Each class can configure one email address as the alert message's receiver. For an email alert to function correctly, add the CP0 and CP1 IP addresses and hostnames to DNS and also set - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 263
2 : Disable Email Alert 3 : Enable Email Alert 4 : Send Test Mail 5 : Set Recipient Mail Address for Email Alert 6 : Relay Host IP Configuration 7 : Quit Select an item => : (1..7) [7]5 Mail Config Menu 1 : Environment class 2 : SFP class 3 : Port class 4 : Fabric class 5 : E-Port class - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 264
and IPv6 addresses. The overall status is calculated based on the following contributors: Port Errors: LFA SRX SFP receive power is out of specification STX SFP transmit power is out of specification Fabric Watch license. Port errors are not supported for virtual ports and SFP errors are not - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 265
faulty ports o Report based on all offline ports If no option is specified, all ports are displayed. Examples To retrieve a port detailed report for a switch configured with an IPv6 address: switch:user> fwportdetailshow Port Detail Report Switch Name: switch IP address: 1080::8:800:200C - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 266
2 fwPortDetailShow See Also To retrieve a port detailed report: switch:user> fwportdetailshow --s h Port Detail Report Switch Name: switch IP address: 192.168.163.237 Port Exception report [by Healthy] Report time: 05/21/2007 11:22:58 PM --------Port-Errors SFP-Errors---- Port# Type - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 267
eighty-port switch: switch:user> 100 13 U 0 0 0 100 14 U 0 0 0 100 15 U 0 0 0 100 16 F 100 0 0 0 17 F 100 0 0 0 18 F 100 0 0 0 19 F 0 0 0 100 30 U 0 0 0 100 31 U 0 0 0 100 32 U 0 0 0 100 33 U 0 0 0 100 Fabric OS Command Reference 241 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 268
0 0 100 45 U 0 0 0 100 46 U 0 0 0 100 47 U 0 0 0 100 48 U 0 0 0 100 49 U 0 0 0 100 50 U 0 0 0 100 51 U 0 0 0 0 0 100 61 U 0 0 0 100 62 U 0 0 0 100 63 U 0 0 0 100 64 U 0 0 0 100 65 U 0 0 0 100 66 U 0 0 0 100 67 U 0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 269
the time period in which a port must be persistently in a state before being recognized as such. Examples To set message levels and port persistence time: switch:user> fwset --port --persistence 18 See Also fwShow Fabric OS Command Reference 243 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 270
Fabric Watch settings. The fwSetToCustom command allows you to switch from default to custom settings. The command assumes that a set of and default values for specified classes and areas in Fabric Watch. For specific configuration procedures, refer to the Fabric Watch Administrator's Guide. - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 271
Fan 3 : Power Supply 4 : return 14 01:21:36 2008 30 C In_Range 6 envTemp006 enabled 32 C inBetween Thu Feb 14 01:21:36 2008 31 C : Custom Unit Time base Low High BufSize Default C 0 60 10 change custom time base 15 : change inBetween alarm 6 : change custom low 16 : apply threshold - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 272
2 fwSetToCustom 8 : change custom buffer 18 : return to previous page 9 : apply threshold boundary changes 10 : cancel threshold boundary changes Select choice => : (1..18) [18] See Also fwSetToDefault, fwConfigure, fwHelp, fwShow 246 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 273
default values for specified classes and areas in Fabric Watch. For specific configuration procedures, refer to the Fabric Watch Administrator's Guide. . Operands none Examples To return alarm levels to default values: switch:admin> fwsettodefault Committing configuration...done. To view current - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 274
: Power Supply Feb 14 01:21:36 2008 30 C In_Range 6 envTemp006 enabled 32 C inBetween Thu Feb 14 01:21:36 2008 31 C at : Custom Unit Time base Low High BufSize Default C 0 60 10 : change custom time base 15 : change inBetween alarm 6 : change custom low 16 : apply threshold alarm - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 275
10 : cancel threshold boundary changes Select choice => : (1..18) [18] See Also fwSetToCustom, fwConfigure, fwHelp, fwShow fwSetToDefault 2 Fabric OS Command Reference 249 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 276
Guide. In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper) class threshold is supported only thresholds disabled. Examples To display thresholds for a fan in the SFP class: switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold information 3 : - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 277
: (1..12) [12] 1 1 : Temperature 2 : Fan 3 : Power Supply 4 : return to previous page Select an area => : (1..4) [4] Env Fan 2 2518 RPM envFan003 Env Fan 3 2481 RPM switch:user> fwshow 1 : Show class thresholds 2 : Detail 1 time, last at 16:30:17 on 12/09/2011 Fabric OS Command Reference 251 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 278
2 fwShow Event 1 occurred 10 times, last at 16:49:02 on 12/09/2011 * Event 5 occurred 1 time, last at 16:30:23 on 12/09/2011 Callbacks: No callbacks are registered. To show port persistence time: switch:admin> fwshow --port --persistence FW: current port persistence time = 18s To display ports - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 279
commands typed into the shell; the oldest commands are replaced as new ones are entered. Operands none Examples To display previous shell commands: switch:admin> h 1 version 2 switchshow 3 portdisable 2 4 portenable 2 5 switchshow See Also none Fabric OS Command Reference 253 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 280
haDisable haDisable Disables the High Availability feature. Synopsis hadisable Description Use this command to disable the High Availability (HA) feature on a switch. If the HA feature is already disabled, this command does nothing. Note The execution of this command is subject to Admin Domain - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 281
running, but the background health diagnostic has discovered a problem with the blade. The logs should be checked to determine the appropriate , and the failover would be disruptive. • IP and Fibre Channel addresses configured for the switch. • Additional internal HA state information, subject - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 282
Subnetmask: 255.255.240.0 Fibre Channel IP Address: 220.220.220.64 Fibre Channel Subnetmask: 255.255.240.0 CP0 Ethernet IP Address: 10.32.227.66 Ethernet Subnetmask: 255.255.240.0 Host Name: cp0 Gateway IP Address: 10.32.224.1 CP1 Ethernet IP Address: 10.32.227.67 Ethernet Subnetmask: 255.255.240 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 283
haEnable 2 haEnable Enables the High Availability feature. Synopsis haenable Description Use this command to enable the High Availability (HA) feature on a switch. If the HA feature is already enabled, this command does nothing. Note The execution of this command is subject to Admin Domain - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 284
the failover, even while traffic is continuing to flow. This command is supported only on dual-CP systems. The execution of this command is subject to force the failover of the active CP to the standby CP in the switch: switch:admin> hafailover Local CP (Slot 7, CP1): Active, Warm Recovered Remote - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 285
, but the background health diagnostic has discovered a problem with the blade. The logs should be checked to determine the appropriate be supported on non-bladed systems. Operands none Examples To display CP status, first on a healthy standby CP and then on a faulty standby CP: switch:admin> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 286
2 haShow See Also switch:admin> hashow Local CP (Slot 6, CP1): Active, Warm Recovered Remote CP (Slot 5, CP0): Standby, Failed Backplane PCI fail, severity: CRITICAL HA enabled, Heartbeat Up, HA State not in sync haDisable, haEnable, haFailover 260 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 287
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Examples To enable the HA state synchronization: switch:admin> hasyncstart HA State synchronization has started See Also haFailover, haShow, haSyncStop Fabric OS Command Reference 261 53 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 288
to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To disable the HA state synchronizing process: switch:admin> hasyncstop See Also haFailover, haShow, haSyncStart 262 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 289
command Specify the command name, with or without quotation marks. This operand is optional. Examples To display help information for the help command: switch:admin> help help See Also diagHelp, fwHelp, licenseHelp, perfHelp, routeHelp, zoneHelp Fabric OS Command Reference 263 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 290
, FAN, POWER SUPPLY, SW BLADE (port blade), CP BLADE (control processor), WWN (WWN card), or UNKNOWN. Object number Slot number for blades. Unit number depends on the HW platform. The Brocade 48000 director supports 100 history log entries. The Brocade DCX supports a maximum log size of 50 entries - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 291
which records the insertion and removal of FRUs on a switch or chassis. This command supports two modes of handling new log entries once the history depends on the HW platform: The Brocade 48000 Director supports 100 history log entries. The Brocade DCX backbone supports a maximum log size of 50 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 292
, FAN, POWER SUPPLY, SW BLADE (port blade), CP BLADE (control processor), WWN (WWN card), or UNKNOWN. Object number Slot number for blades. Unit number depends on the HW platform. The Brocade 48000 director supports 100 history log entries. The Brocade DCX supports a maximum log size of 50 entries - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 293
13:53:40 2001 Factory Part Number: 60-0001532-03 Factory Serial Number: 1013456800 CP BLADE Slot 6 Inserted at Tue Aug 14 13:59:50 2001 Factory Part Number: 60-0001604-02 Factory Serial Number: FP00X600128 POWER SUPPLY Unit 2 Inserted at Tue Aug 14 15:52:10 2001 Factory Part Number: 60 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 294
Use this command to display the version of the Java plug-in supported by Web Tools. This command also displays the URL from which the . Operands none Examples To display the Java plug-in version: switch:admin> httpcfgshow Current HTTP configuration javaplugin.version = 1,5,0,6 javaplugin.homeURL - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 295
process summary. Synopsis i [processID] Description Use this command to display information about a specified process or about all processes running on the local switch. One line is displayed per process. Fields displayed with this command include those shown in Table 15. TABLE 15 Command field - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 296
the following operand: processID Specifies the process name or process ID for the process to display. Examples To display information about process ID 433: switch:admin> i 433 F S UID PID PPID C PRI NI ADDR SZ WCHAN TTY TIME CMD 000 S 0 433 1 0 69 0 - 1283 5c64 ? 00:00:02 fabricd See Also - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 297
disabling the ports associated with the link. This command is supported only on the Brocade DCX backbone. Notes The execution of this command is subject disable the ICL for ports 16-31: switch:user> iclcfg --disable 8/1 To enable the ICL for ports 16-31: switch:user> iclcfg --enable 8/1 Fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 298
this command through the serial console port, follow this scenario for the ifModeSet command: switch:admin> ifmodeset eth0 Exercise care when using this command. Forcing the link to an operating mode not supported by the network equipment to which it is attached may result in an inability to - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 299
auto-negotiation to 10 Mbps half-duplex operation, when entering this command through the serial console port: switch:admin> ifmodeset eth0 Auto-negotiate (yes, y, no, n): [yes] n Force 100 Mbps / Full Duplex (yes, y, no, n): [no] n Force 100 Mbps / Half Duplex (yes, y, no, n): [no] n Force 10 Mbps - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 300
eth0, where eth is the network interface and 0 is the physical unit. Examples To display the link operating mode for the "eth0" Ethernet interface: switch:admin> ifmodeshow eth0 Link mode: negotiated 100baseTx-HD, link ok MAC Address: 00:60:69:D0:24:40 See Also ifModeSet 274 Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 301
structure contains all the information relating to the switch that is connected to an adjacent switch. This command displays the content of both present, of the trunk group of which this port is a part. defaultCost Default cost of sending a frame over the ISL connection to this interface. cost - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 302
ID. inactTo Inactivity timeout value, in milliseconds. When this timeout expires, the adjacency with the neighbor switch is broken and new paths are computed to all possible destination switches in the fabric. helloTo Hello timeout value, in milliseconds. When this timeout expires, a Hello frame - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 303
switch. Number of LSAs transmitted to the neighbor switch. Operands This command has the following operands: slotnumber For bladed systems nbstFull = Apr 02 20:01:44.512 delay = 1 lastScn = 16 &dbRetransList = 0x1008c6a0 &lsrRetransList = 0x1008c6c4 &lsrAckList = 0x1008c6e8 inactTID = - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 304
2 interfaceShow lsrRtxTID inactTo helloTo rXmitTo nCmdAcc nInvCmd nHloIn nInvHlo nLsuIn nLsaIn attHloOut nHloOut attLsuOut nLsuOut attLsaOut nLsaOut = 0x1008c848 = 80000 = 2000 = 5000 = 7 = 0 = 2 = 0 = 2 = 3 = 2 = 2 = 3 = 3 = 2 = 2 See Also nbrStateShow, portShow, switchShow 278 Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 305
interoperability with McDATA switches within a Brocade fabric. Fabric OS v6.0.0 introduces a new M-EOS-compatible McDATA Open Fabric Mode (interopMode 3) on all platforms that support McDATA Fabric Mode (interopmode 2). Open Fabric Mode is intended specifically for adding FOS-based products into - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 306
on, the OUI portion of the switch WWN is no longer replaced with a McDATA OUI. The Brocade OUI is used. However, upgrading from Fabric OS 5.2.1_NI to Fabric return to their default states and can be modified using the configure command. For information on supported hardware platforms and procedures - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 307
Safe Zone on while in interopmode 2: switch:admin> interopMode 2 -s 1 InteropMode: McDATA Fabric Default Zone: Off Safe Zone: On To disable interoperability mode on a disabled switch: switch:admin> interopmode O Interop mode is disabled The switch effective configuration will be lost. The system - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 308
Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To reset IOD delay to default values for domain 10: switch:admin> ioddelayreset 10 See Also iodSet, iodReset, iodShow, iodDelaySet, iodDelayShow 282 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 309
new path after a topology change does not exceed the specified value. The switch must be disabled before IOD delay can be set. Note The execution of this milliseconds. The valid range for this value is 10 500 ms. The default value is -1. domain_id Specifies the domain ID to which the IOD delay - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 310
with the iodDelaySet command. The command does not display defaults values. Note The execution of this command is subject IOD delay setting for domain 5: switch:user> ioddelayshow 5 omain - Iod Delay 5 - 20 To display IOD settings for all domains in the fabric: switch:user> ioddelayshow 5 omain - - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 311
the in-order delivery (IOD) option. Synopsis iodreset Description Use this command to disable in-order delivery enforcement on the local switch. IOD is disabled by default, and can only be disabled after it has been enabled with the iodSet command. Disabling IOD allows faster re-routing after - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 312
frames are always delivered in order, even when the traffic between switches is shared among multiple paths. However, when topology changes occur in -of-order, even during fabric topology changes. IOD is turned off by default. Notes This command should be used with caution, because it can cause - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 313
Use this command to display whether the IOD option is enabled or disabled. The default setting for IOD is disabled. Operands none Examples To display the current setting of the IOD option: switch:admin> iodshow IOD is not set See Also iodReset, iodSet, iodDelaySet, iodDelayReset, iodDelayShow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 314
IP address details for a switch, a control processor (CP), an intelligent blade IP addresses on a switch, a CP, a BP, or a standalone AP. The command supports an interactive mode, which supports only IPv4 addresses, and an alternate interface for managing IP Administrator Guide. To set IP addresses - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 315
IP address, Ethernet subnetmask, gateway IP address, and host name of CP0. 1 Sets the Ethernet IP address, Ethernet subnetmask, gateway IP logical switch. Valid values for number are 0 or 1. On platforms with blade processors, the following additional command line options are supported with the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 316
add 1080::8:800:200C:417A/64 To delete any existing IPv6 address and prefix on CP 0 on an enterprise-class platform: switch:admin> ipaddrset cp 0 -ipv6 --delete To configure a local IPv4 Ethernet address on a Brocade FC4-16E in a chassis (prefix required): switch:admin> ipaddrset -slot 1 -eth0 --add - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 317
switches, the command displays the Ethernet IP address, Ethernet subnetmask, Fibre Channel IP address, and Fibre Channel subnetmask. For CPs, the command displays the Ethernet IP address, Ethernet subnetmask, host name, and gateway IP address. For chassis based systems with intelligent blades the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 318
policy name is a unique string composed of a maximum of 20 alpha numeric or underscore characters. The default_ipv4 and default_ipv6 names are reserved for default IP filter policies. The policy name is case-insensitive and is always stored as lower case. The policy type identifies the policy as an - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 319
. The policy to be activated replaces the existing active policy of the same type. Activating the default IP filter policies returns the IP management interface to its default state. An IP filter policy without any rule cannot be activated. This operand prompts for confirmation before proceeding - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 320
The following arguments are supported with the --addrule option: -sip Specifies the source IP address. For filters of type IPv4, the address must be a 32-bit address in dot notation, or a CIDR-style IPv4 prefix. For filters of type IPv6, the address must be a 12- bit IPv6 address in any - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 321
60:69bc:60:260:69ff:fe80:d4a tcp Dest Port Action 23 permit To activate the IP Filter policy "ex1": switch:admin> ipfilter --activate ex1 To display all IP Filter policies, including the activated policy: switch:admin> ipfilter --show Name: default_ipv4, Type: ipv4, State: active Rule Source - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 322
ex2 -type ipv4 To add a rule to the created policy "ex2": switch:admin> ipfilter --addrule ex2 -sip 10.32.69.99 -dp 23 -proto tcp -act permit To display the IP filter policies, including the new policy: switch:admin> ipfilter --show Name: default_ipv4, Type: ipv4, State: active Rule Source - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 323
iscsiCfg Configures or displays iSCSI entities. Synopsis iscsicfg create auth -u username -s CHAP_secret [-h] iscsicfg --modify auth -u username -s CHAP_secret [-h] iscsicfg --delete auth -u username [-h] iscsicfg --clear auth [-h] iscsicfg --show auth [-u username] [-h] iscsicfg --easycreate tgt - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 324
all operands. Use --commit all to save all entity changes to nonvolatile memory. This triggers the propagation of changes to all iSCSI-enabled switches and blades in the fabric. Changes do not take effect until a --commit all command is issued. Make all necessary configuration changes before issuing - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 325
CHAP is specified, then either one-way or mutual CHAP is enforced, based on the login frame from the host. --addusername tgt -t target_name Currently, only IQN format is supported. Multiple entities may be specified as a comma-separated list. The IQN may be a maximum of 64 characters. --add dd -d - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 326
. Actions on initiator are: --clear initiator [-h] Clears the iSCSI initiator database. --show initiator [-i initiator_name][-h] Displays all iSCSI initiators that the switch is aware of. If an initiator has attempted discovery or logon to a target, it is displayed here. If initiator_name is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 327
-a CHAP The operation completed successfully. To display the target database: switch:admin> iscsicfg --show tgt Number of records found: 2 Name: State/Status: iqn.2005-10.com.brocade.tgt1 Offline/Defined Name: State/Status: iqn.2222-23.com.brocade:21:00:00:20:37:df:83:fc Online/Committed To - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 328
-w 22:00:00:04:cf:75:5b:9a -l 2-5:5-8 The operation completed successfully. To display LUN maps: switch:admin> iscsicfg --show lun Number of records found: 2 Target: iqn.2005-10.com.brocade.tgt1 Number of LUN Maps: 1 FC WWN Virtual LUN(s) 22:00:00:04:cf:20:5d:33 0 Physical LUN(s) 0 Target - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 329
myddset -d mynewdd The operation completed successfully. To display the iSCSI-aware switches and their operational states (Displays switches that are capable of propagating iSCSI data base): switch:admin> iscsicfg --show fabric Switch ID Switch WWN Switch State iSNSC * 1 10:00:00:60:69:e4:20:1e - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 330
found: 1 Name iqn.1991-05.com.brocade:initiator1 IP Address 172.16.14.101 switch:admin> iscsicfg --show initiator -i iqn.1991-05.com.brocade:initiator1 Initiator details are: Name IP Address iqn.1991-05.com.brocade:isi154116.englab.brocade.com 172.16.14.101 No. of targets currently accessible - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 331
command is supported only on the Brocade FR4-16IP blade. On all -unit gbeports Specifies the GbE port to test. By default, all GbE ports in the specified slot slotnumber are tested. specify 8 for all ports. Examples To run iscsichiptest: switch:admin> iscsichiptest --slot 7 -unit 1 -testtype 0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 332
Examples To display the list of iSCSI support commands: switch:admin> iscsihelp fclunquery fosconfig iscsicfg iscsiportcfg iscsisessioncfg iscsiswcfg portcfg portshow switchshow Display a list of LUNs of FC target(s). Enable/disable FabOS services Manage/display all iscsi configuration including - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 333
iSCSI complex. The CP processor instructs the Network processor BCM1125H in Note This command is supported only on the Brocade FR4-16IP blade. On all other loopback at network processor 8-bit FIFO. -nframes count Specifies The default value is 100. Examples To run iscsipathtest: switch:admin> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 334
modify the iSCSI port parameters. The default iSCSI port settings are as follows: TABLE 16 Default iSCSI port settings Setting Default Error recovery level Connections per session Connections per session Header digest support Immediate data support First burst length value 0 1 Disabled Disabled - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 335
number. This parameter only supports FC4-16IP blades in Brocade 48000 directors. Specifies the port number of a GbE port to be configured in the specified slot. Use -h on any option to display the help text for it. Examples To modify the port parameters: switch:admin> iscsiportcfg --modify 7/ge2 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 336
2 iscsiPortCfg See Also iSCSI Abort Task Set: iSCSI Clear ACA: iSCSI Clear Task Set: iSCSI LUN Reset: iSCSI Target Reset: iSCSI Task Reassign: Non FCP in PDU: Non FCP in Octet: Non FCP out PDU: Non FCP out Octet: Session details: Session Number: iSCSI Session Type: Initiator Name: Target Name: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 337
.com Target Name: iqn.2002-12.com.brocade:2f:df:00:06:2b:0d:10:b9 Session type Init. Session ID Tgt. Session ID Initiator IP Num. Conns . Normal 0x400001370000 1025 30.50.1.115 1 TCP Connection Details Index TCP Port Leading Connection Switch Port 1 2743 Yes 8/ge4 Security Details - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 338
Max. Burst Length First Burst Length Max outstanding R2T Default time to retain Default time to wait Error recovery level Initial R2T 256KB out Octet: 0 See Also fosConfig, iscsiCfg, iscsiPortCfg 256KB 64KB 16 60s 0s 2 Off Peer Value 64KB On On On 312 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 339
the connection redirection for iSCSI blades on the switch: switch:admin> iscsiswcfg --showconn -s all Number of records found: 1 Slot ICR Status 3 Disabled To display a target name prefix: switch:admin> iscsiswcfg --showgw Target name is: iqn.2002-12.com.brocade To change a target name prefix - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 340
2 iscsiSwCfg See Also fosConfig, iscsiCfg, iscsiPortCfg 314 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 341
the ISL connections for the switch: switch:user> islshow 1: 2->300 10:00:00:05:1e:43:00:00 100 neptune sp: 8.000G bw: 32.000G TRUNK QOS 2: 8-> 3 10:00:00:05:1e:41:8a:d5 30 thor sp: 4.000G bw: 16.000G TRUNK QOS 3: 19-> 10 10:00:00:05:1e:41:43:ac 50 tomahawk sp: 8.000G bw: 64 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 342
GbE port in an iSCSI blade. This parameter only supports Brocade FC4-16IP blades in Brocade 48000 directors. -s server_ip Specifies the IP address in dotted-decimal form. Examples To set the IP address of an external iSNS server with an attached GbE port: switch:admin> isnsccfg --set 7/ge0 -s 192 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 343
isnscCfg 2 See Also To register the iSNS objects: switch:admin> isnsccfg --reregister Initiated re-register of iSNS objects with iSNS server To clear the IP address of iSNS server: switch:admin> isnsccfg --clear Cleared iSNS server configuration. none Fabric OS Command Reference 317 53-1000599 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 344
" and "1/0, 2/0, 3/0" specify the same ports on a 16-port/blade system. On that same system, "1/0, 16, 32" is not a valid list: even though it is legal syntax, the ports do not exist. • If no slot number is specified, all lists except user port lists use the default slot 0. • No list type except for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 345
shown in Table 17. TABLE 17 Object descriptions Type Grouping Description BPORTS UPORTS QUADS CHIPS MINIS SLOTS INDEX Blade Switch Blade Blade Blade Chassis n.a. Blade ports, internal and external ports User ports, ports with external connections Quadrants, group of (normally four) ports - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 346
such as session number, login name, idle time, IP address of the connection, and timestamp of when the an open Telnet connection: switch:admin> killtelnet Collecting login 130.29 " since " 6:29pm" and has been inactive for "16.00s ", the current command executed being: "-rbash ". The device - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 347
Directory (AD) server role to one of the default roles available on a switch. This command also provides an option to remove an switch with the permissions associated with the mapped switch role. This command supports one-to-one role mapping only. For example, you might map the "SAN administrator - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 348
| zoneadmin See Also To map an LDAP ADir role to the switch role of "operator": switch:admin> ldapcfg --maprole SANoperator operator LDAP role SANoperator has been successfully mapped. switch:admin> ldapcfg --unmaprole SANoperator LDAP role SANoperator has been successfully unmapped - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 349
. Some features of the switch and the fabric to which it is connected are optional, licensed products. Without a license installed for such products, their services are not available. A license key is a string of approximately 16 upper- and lowercase letters and numbers. Case is significant. The - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 350
the commands used to administer license keys. Operands none Examples To display license commands: switch:admin> licensehelp licenseadd licensehelp licenseidshow licenseremove licenseshow Adds license keys to switch Print license help info Displays the system license ID Removes a license key from - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 351
Some features of the switch and the fabric are optional, licensed products. Without a license installed for such products, the services provided by these features are of one another. Operands none Examples To display the license ID: switch:admin> licenseidshow a4:f8:69:33:22:00:ea:18 See Also - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 352
there are more online ports than the purchased POD licenses can support. Note The execution of this command is subject to Admin Domain that is offline. --reserve portnum Reserves a license assignment for a port when the switch is using the Dynamic POD method. This option can only be applied to a - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 353
installed 15 ports are assigned to installed licenses: 10 ports are assigned to the base switch license 5 ports are assigned to the first POD license Ports assigned to the base switch license: 0, 1, 2, 3, 4, 5, 6, 7, 15, 16 Ports assigned to the first POD license: 8, 9, 17, 18, 19 Ports assigned to - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 354
licenseRemove Removes the license key from the system. Synopsis licenseremove "license" Description Use this command to remove an existing license key from a switch. The existing license key must be entered exactly as shown by licenseShow, including case. When the key has been entered, use the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 355
To display the license keys on a switch with temporary (expired) licenses installed: switch:admin> licenseShow 7QmYFYJrmDgE9tTS4AYXB9trYSGtMtrQZSTK4ZSC7FC9ZAYAgE: Integrated Routing license Expiry Date 01/16/2008 License is expired 33YBfZfKZ3tQKrRJJRtgmS3JDtCL99P4fYrJYQP7GffS4ASmNE: Enterprise - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 356
switch by adding the costs of all the ISLs along each path. FSPF chooses the path with minimum cost. If multiple paths exist with the same minimum cost, FSPF distributes the load among these paths. Every ISL has a default operands are optional: slotnumber For bladed systems only, specify the slot - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 357
:admin> linkcost 2/4 Interface2/4 Cost 500 (STATIC) To delete the cost value and reset to default: switch:admin> linkcost 2/4 0 To display the change: switch:admin> linkcost 2/4 Interface2/4 Cost 1000 See Also interfaceShow, lsDbShow, topologyShow, uRouteShow, fcrRouterPortCost Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 358
2 login login Logs in as new user. Synopsis login Description Use this command to log in to the switch with another user name and password, without first logging out from the original session. If you originally connected through a Telnet or rlogin session, that session - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 359
command is accepted as a synonym for logout, as is Ctrl-D at the beginning of a line. Operands none Examples To log out from an rlogin session: switch:admin> logout See Also login Fabric OS Command Reference 333 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 360
lsanZoneShow lsanZoneShow Displays logical SAN zone information. Synopsis LSAN zone. The default output displays only WWNs of the zone members. Search parameters -f, -w, and -z allow searching for LSAN zones based on fabric ID switch, which can differ from the database stored on the other FCR - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 361
lsanZoneShow 2 Examples See Also To display the LSAN zones: switch:admin> lsanzoneshow Fabric ID: 4 Zone Name: lsan_fcr10_0 50:05:07:65 :84:0b:83 50:05:07:65:05:84:09:0e switch# fcrFabricShow, fcrPhyDevShow, fcrProxyDevShow, fcrRouteShow, switchShow Fabric OS Command Reference 335 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 362
two types of database entries: 1. The link state database entry, which is permanently allocated. 2. The link state record (LSR), which is allocated when a switch is connected to the fabric. The LSR describes the links between connected domains in a fabric. For a link to be reported in the LSR, the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 363
the switch on the other side of the link. Port number on the local switch. Port number of the port on the other side of the link. Cost of this link. The default cost 0 Link State Record: Link State Record pointer = 0x10053d18 lsAge = 16 reserved = 0 type = 1 options = 0x0 lsId = 1 Fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 364
16, flags = 0x0 LinkId = 2, out port = 16, 27, rem port = LinkId = 2, out port = 32, rem port = LinkId = 2, out port = 33 port = LinkId = 2, out port = 47, rem port = 48, cost = 500, costCnt = 0, type = 1 49, cost switch has sixteen links in NB_ST_FULL state, all of them are connected to switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 365
in kilobytes. -m Specify to display memory usage in megabytes. By default, memory usage is displayed in bytes. Examples To view the memory usage: switch:admin> memshow total used Mem: 129740800 112562176 Swap: 0 0 switch:admin> memshow -m total used Mem: 123 107 Swap: 0 0 free - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 366
2 miniCycle miniCycle Runs a functional test of internal and external transmit and receive paths at full speed. Synopsis minicycle [--slot slotnumber][-nmegs count][-lb_mode mode][-spd_mode mode][-splb_mode 0 | 1] [-ports itemlist] Description Use this command to verify the intended functional - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 367
of portLoopbackTest can determine which components of the switch are faulty. Notes The Brocade DCX backbone cannot negotiate to 1 Gbps speed. until the specified number of frames has been transmitted on each port. The default value for count is 1, so the total number of frames sent will be - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 368
test. By default, all the blade ports in the specified slot (--slot) are used. Refer to itemList for further details. If all ports in the ASIC pair are not specified, only paths between selected ports are tested. ASIC-pair 0: -ports 0-15 ASIC-pair 1: -ports 16-31 ASIC-pair 2: -ports 32-47 ASIC-pair - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 369
: minicycle Pass 1 of 1 Duration 0 hr, 1 min & 4 sec (0:1:4:409). passed. To run a functional test on ports 0, 1, 2, and 8 using port loopback: switch:admin> minicycle -ports 0,1,2,8 -lb_mode 1 Back Plane Loop Back mode is ON. Running mini Cycle One moment please ... Path 0 ... Spinning ... Path - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 370
2 miniCycle See Also FTPRT_STATUS_ERR INIT LESSN_STATUS_ERR MBUF_STATE_ERR MBUF_STATUS_ERR NO_SEGMENT PORT_ABSENT PORT_DIED PORT_ENABLE PORT_M2M PORT_STOPPED PORT_WRONG RXQ_FRAME_ERR RXQ_RAM_PERR STATS STATS_C3FRX STATS_FRX STATS_FTX TIMEOUT XMIT Refer to the Fabric OS Message Reference for more - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 371
Switch WWN Capability Switch Name 10:00:00:60:69:20:15:71 0x0000008f "switch1"* 10:00:00:60:69:00:30:05 0x0000008f "switch2" Capability Bit Definitions: Bit 0: Basic Config Service Supported. Bit 1: Platform Management Service Supported. Bit 2: Topology Discovery Service Supported. Bit - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 372
"Command Availability" for details. This command is supported only in AD0 and AD255 contexts. Operands none Examples To display the MS ACL: switch:admin> msconfigure 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 373
msConfigure 2 See Also 0 Done 1 Display the access list 2 Add member based on its Port/Node WWN 3 Delete member based on its Port/Node WWN select : (0..3) [1] 0 done ... msCapabilityShow, msPlatShow, msPlClearDB, msPlMgmtActivate, msPlMgmtDeactivate, msTdDisable, msTdEnable, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 374
associated management addresses, and associated node names. Operands none Examples To display the MS platform database for a fabric: switch:admin> msplatshow Platform Name: [9] "first obj" Platform Type: 5 : GATEWAY Number of Associated M.A.: 1 Associated Management Addresses: [35] "http://java - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 375
to display the control block fields associated with the platform database. Operands none Examples To display the MS platform service database control block: switch:admin> msplatshowdbcb Domain Worldwide Name Retry Count Exchange Status 3: 10:00:00:60:69:51:10:e6 0 0x2 msPlDBCB - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 376
"Command Availability" for details. This command is supported only in AD0 and AD255 contexts. Operands none Examples To clear the MS platform database: switch:admin> msplcleardb MS Platform Service is currently enabled. This will erase MS Platform Service Database in the entire fabric. Would you - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 377
is persistent across power cycles and reboots. Notes By default, the MS platform service is disabled. Before issuing this command, run msCapabilityShow to verify that all switches in the fabric support the MS platform service; if one switch does not support the service, the command fails - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 378
A, "Command Availability" for details. This command is supported only in AD0 and AD255 contexts. Operands none Examples To deactivate the MS platform service on all switches in the fabric: switch:admin> msplmgmtdeactivate MS Platform Service is currently enabled. This will erase MS Platform - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 379
database for all affected switches. The change is persistent across power cycles and reboots. Notes Topology Discovery Management requires the attached devices (including attached switches) to support request node identification data (RNID) extended link service (ELS). When FCS policy - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 380
database for all affected switches. The change is persistent across power cycles and reboots. Notes Topology Discovery Management requires the attached devices (including attached switches) to support request node identification data (RNID) extended link service (ELS). When FCS policy - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 381
Use this command to check whether or not the management server topology discovery service is enabled. Operands none Examples To display the status of the topology discovery service: switch:admin> mstdreadconfig *MS Topology Discovery is enabled. See Also msCapabilityShow, msConfigure - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 382
. This includes IPv4 or IPv6 addresses associated with the login session. The login session gives details of the following: • CP/switch (or console/serial port) used to log in. • The IP address of the current login session for Telnet or the name of the current console port or the serial port (if - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 383
Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional switches directly connected to the local switch: switch:user> nbrstateshow 2/0 Local Domain ID: 1 Local Port Domain Remote Port State 16 2 48 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 384
Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. This operand is optional FSPF statistics are reset. Examples To display the counters on a port: switch:admin> interfaceshow 1/0 idbP = 0x10050a38 Interface 0 data structure: nghbP - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 385
To reset the counters on a port: switch:admin> nbrstatsclear 1/0 To verify the changes: switch:admin> interfaceshow 1/0 idbP = 0x10050a38 Interface 0 data structure: nghbP ifNo masterPort defaultCost cost = 0x1004ce68 = 0 = 0 (self) = 500 = 500 (output truncated) See Also interfaceShow, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 386
. PID must begin with 0x or 0X; otherwise, it is interpreted as an alias. Examples To display all the device information matching the alias "a320": switch:user> nodefind a320 Local: Type Pid COS PortName NodeName SCR NL 0314d9; 3;22:00:00:04:cf:5d:dc:2d;20:00:00:04:cf - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 387
information matching the WWN "20:00:00:e0:8b:01:ce:d3": switch:user> nodefind 20:00:00:e0:8b:01:ce:d3 Remote: Type : No Aliases: To display all the device information matching the PID "0x020eef": switch:user> nodefind 0x020eef Remote: Type Pid COS PortName NodeName NL 020eef; 3;20: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 388
defined: • Physical - Device connected to the Nx_Port, using FLOGI to log in to the switch. • Virtual - Contrived device by the switch. • NPV - Device connected to the Nx_Port, using FDISC to log in to the switch. • iSCSI - Device connected to the iSCSI port. The second part indicates the role of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 389
To display local NS information with aliases: switch:admin> nsaliasshow { Type Pid COS PortName Name Server has 6 entries } To display local NS information with aliases with the -r option: switch:admin> nsaliasshow -r { Type Pid COS PortName NodeName SCR N 021200; 2,3;10:00:00:60: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 390
:00:00:ad:bc:04:6f:70 Aliases: The Local Name Server has 6 entries } To display local NS information with aliases with the -r and -t options: switch:admin> nsaliasshow -r -t { Type Pid COS PortName NodeName SCR N 021200; 2,3;10:00:00:60:69:00:03:19;30:00:00:60:69:00:03:19 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 391
Use this command to display the 24-bit Fibre Channel addresses of all devices in all switches in the fabric. If the type operand type codes: 8 = FCP type device 4, 5 = FC-IP type device Other FC-PH types are displayed in the format "x ports supporting FC4 code," where x is the number of ports of a - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 392
, NL for NL_Port. Pid The 24-bit Fibre Channel address. COS A list of classes of service supported by the device. PortName The device's port display all switch and device entries discovered by the NS in the fabric: switch:admin> nscamshow nscam show for remote switches: Switch entry for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 393
Port Name: 20:02:00:60:69:00:68:19 Permanent Port Name: 10:00:00:60:69:00:ab:ba Device type: Physical Initiator Switch entry for 4 state rev owner known v320 0xfffc01 Device list: count 0 No entry is found! See Also nsAllShow, nsShow, switchShow Fabric OS Command Reference 367 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 394
nsAllShow to display NS information for all switches in the fabric. Each line of output displays the following information: Type U for unknown, N for N_Port, NL for NL_Port. PID 24-bit Fibre Channel address. COS List of classes of service supported by device. PortName Device port World Wide - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 395
device type information. After a nondisruptive upgrade from those Fabric OS versions, the initiator/target)". Examples To display local NS information: switch:admin> nsshow { Type Pid COS PortName NodeName [41] "QLA2340 FW:v3.03.06 DVR:v9.0.0.2 (w32 IP)" Fabric Port Name: 20:01:00:05:1e:34:00: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 396
switch:admin> nsshow -r { Type Pid COS PortName NodeName SCR N 010100; 3;21:00:00:e0:8b:13:08:10;20:00:00:e0:8b:13:08:10; 1 FC4s: FCP NodeSymb: [41] "QLA2340 FW:v3.03.06 DVR:v9.0.0.2 (w32 IP name server information with "-r" and "-t" options. switch:admin> nsshow -r -t { Type Pid COS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 397
N_Port, NL for NL_Port. Pid The 24-bit Fibre Channel address. COS A list of classes of service supported by the device. PortName The device's of the following information (the switch automatically registers SCSI inquiry data for FCP target devices): • FC4 supported • IP address (node) • IPA - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 398
members To display information about all the online devices zoned with the given WWN: switch:admin> nszonemember 10:00:00:00:c8:23:0b:ad 3 local zoned members members To display each local device's online zoned device data: switch:admin> nszonemember -a Port: 4 Pid: 0xb00400 Aliases: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 399
Pid: 0xb00e00 Aliases: dl360_130251a dl360_130251a Pid: 0xba1ae4 Aliases: trimm100a_2 To display all the unzoned devices in the fabric: switch:admin> nszonemember -u Pid: 0xb01ea9; Aliases: trimm32b_1 Pid: 0xb01eaa; Aliases: trimm32b_2 Pid: 0xb01eab; Aliases: trimm32b_3 Pid: 0xb01eac; Aliases - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 400
quotation marks, The user account must be an existing account, either default or user-created. Only users with accounts of type "root", " switches in the fabric, the switches must be configured to accept the password database with the fddCfg command. The password database is distributed manually - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 401
session of that account (if logged in) to terminate. Examples To change the password for the admin account while logged in as admin: switch:admin> passwd Changing password for admin Enter new password: Re-type new password: Password changed. Saving password to stable storage. Password saved to - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 402
2 passwd Insufficient number of upper case letters The password you entered contains less than the minimum required number of uppercase characters. Insufficient number of digits in password The password you entered contains less than the minimum required number of numeric characters. Insufficient - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 403
passwdCfg 2 passwdCfg Manages the password policies. Synopsis passwdcfg --set options value passwdcfg --disableadminlockout passwdcfg --enableadminlockout passwdcfg --setdefault passwdcfg --showall passwdcfg --help Description Use this command to manage password policies. Use --set to - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 404
. A failed login attempt counter is maintained for each user on each switch instance. The counters for all user accounts are reset to zero when the are supported: -lowercase value Specifies the minimum number of lowercase alphabetic characters that must occur in the password. The default value is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 405
password can be changed. -minpasswordage can be set at 0 to 999. The default value is 0. Setting this parameter to a nonzero value discourages a user from rapidly passwdcfg.lockoutduration" duration. The particular account is unlocked manually using userconfig --change account name-u (requires root/ - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 406
lockout policy is disabled. --setdefault Resets all password policies to their default values. --help Displays command usage. Examples To display the current password configuration parameters: switch:admin> passwdcfg --showall passwdcfg.minlength: 8 passwdcfg.lowercase: 0 passwdcfg.uppercase - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 407
passwdCfg 2 See Also lowercase value out of range The -lowercase value specified must be greater than or equal to 0 and less than or equal to -minlength value. uppercase value out of range The -uppercase value specified must be greater than or equal to 0 and less than or equal to -minlength value - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 408
along the path is busy: for instance, if a switch is performing a warm recovery or if a switch along the path does not support this feature. If the advanced performance tuning (APT) policy in effect on the intermediate switches is not a port-based policy, subsequent data streams might not take the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 409
pathInfo frame, that is sent hop-by-hop from the source switch to the destination switch. To prevent such a frame to loop forever if an error occurs reverse path, if the tracing of the reverse path is requested. The default value for the maximum hop count is 25. Basic statistics Basic statistics - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 410
source route to the destination), as a full route, or as an arbitrary route across the Switches running pre-v5.2 firmware cannot use port numbers greater than 256 as a destination port on a remote switch domain is sought. The default is embedded port (-1). For bladed systems, the destination is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 411
; default is 10 seconds. To display basic path information to a specific domain, using the command line (non-interactive mode): switch:admin (1s) - - 0 0 B/s (64s) - - 1 1 Txcrdz (1s) - - 0 - Txcrdz (64s) - - 0 - F/s (1s) - - 0 0 F/s (64s) - - 2743 0 Words - - - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 412
2 pathInfo Words Frames Errors 240434036 20025929 - 2294316 54999 4 2119951 162338 - Hop In Port Domain ID (Name) Out Port BW Cost 2 14 8 (web228) E - - (output truncated) See Also portStatsShow, switchShow 2121767 56710 0 386 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 413
from the latest panic dump file available on the switch. If a panic dump file is specified as following optional operand: panic_dump_file Specify the full path name of a panic dump PD_MISC * WatchDogRegister=0x0 Section=Startup time: Tue Dec 3 16:06:11 UTC 2002 Kernel= 2.4.19 Fabric OS= v4 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 414
command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror port on which the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. SourceID Specifies the 3-byte - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 415
perfAddEEMonitor 2 Examples To add an end-to-end monitor to blade 1 port 2: switch:admin> perfaddeemonitor 1/2 "0x050200" "0x1182ef" End-to-End monitor number 0 added. See Also perfAddIPMonitor, perfAddReadMonitor, perfAddRWMonitor, perfAddSCSIMonitor, perfAddUserMonitor, perfAddWriteMonitor, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 416
based monitor that will count the number of IP license. This command is not supported on virtual FC ports (VE/ added, relative to its slot for bladed systems. Use switchShow for a default alias is "IP Frame". Examples To add an IP monitor to a port: switch:admin> perfaddipmonitor 1/4 IP_MONITOR IP - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 417
create a filter-based monitor that counts Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), be added, relative to its slot for bladed systems. Use switchShow for a list of default alias is "SCSI Read". Examples To add an SCSI read monitor to a port: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 418
to create a filter-based monitor that counts Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port be added, relative to its slot for bladed systems. Use switchShow for a list default alias is "SCSI R/W". Examples To add an SCSI read and write monitor to a port: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 419
create a filter-based monitor that counts Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), be added, relative to its slot for bladed systems. Use switchShow for a list of default alias is "SCSI Frame". Examples To add a SCSI traffic frame monitor to a port: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 420
user-defined filter-based performance monitor. Synopsis an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M the monitor is to be added, relative to its slot for bladed systems. Use switchShow for a list of valid ports. "grouplist" - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 421
limit but are removed. This operand is optional. By default, the alias is an empty string. Examples To add a filter-based monitor for all Extended Link Service requests (R_CTL=0x22 and TYPE=0x01) to a port: switch:admin> perfaddusermonitor 1/4 "4, 0xff, 0x22; 12, 0xff, 0x01" User monitor - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 422
create a filter-based monitor that counts Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), be added, relative to its slot for bladed systems. Use switchShow for a list default alias is "SCSI_Write". Examples To add an SCSI Write command monitor to a port: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 423
command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) To clear the performance monitoring information from nonvolatile memory: switch:admin> perfcfgclear This will clear Performance Monitoring settings in - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 424
requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror the performance monitoring configuration information from nonvolatile memory: switch:admin> perfcfgrestore This will overwrite current Performance Monitoring - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 425
power cycles. The number of monitors that can be saved to flash memory is limited as follows: • 16 EE monitors • 16 filter monitors • A total number of 512 monitors per switch Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port configuration to firmware: switch:admin> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 426
supported on all platforms. Refer to the Fabric OS Administrator's Guide for specific hardware support. Operands This command has the following operands: slotnumber For bladed port: switch:admin> perfclearalpacrc 2/15 0x59 CRC error count at ALPA 0x59 on port 31 is cleared. switch:admin> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 427
Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), be deleted, relative to its slot for bladed systems. Use switchShow for a list of valid all such monitors: switch:admin> perfdeleemonitor 7/2 5 End-to-End monitor number 5 deleted switch:admin> perfdeleemonitor 7/2 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 428
Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), to be deleted, relative to its slot for bladed systems. Use switchShow for a list of valid ports port: switch:admin> perfdelfiltermonitor 2/3 4 The specified filter-based monitor is deleted. switch:admin> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 429
display commands related to performance monitoring: switch:admin> perfhelp perfAddEEMonitor perfAddIPMonitor perfAddReadMonitor perfAddRWMonitor PerfTTmon Add end-to-end monitor Add monitor for IP traffic frame count Add filter-based monitor - SCSI Read Add monitor - SCSI Read and - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 430
Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), be cleared, relative to its slot for bladed systems. Use switchShow for a list of based monitor: switch:admin> perfmonitorclear --class FLT 1/2 4 Filter-based monitor number 4 counters are cleared switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 431
perfMonitorClear 2 This will clear ALL filter-based monitors' counters on port 2, continue? (yes, y, no, y): [no] y To clear statistics counters for an ISL monitor: switch:admin> perfmonitorclear --class ISL 1 This will clear ISL monitor on port 1, continue? (yes, y, no, n): [no] y See Also - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 432
• For filter-based monitors (if no interval is specified), this command displays the following: Key The monitor number. Alias The monitor alias name. Owner_app The owner application: TELNET, WEB_TOOLS, or API. Frame_count The cumulative 64-bit frame count. Owner_ip_addr The IP address of the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 433
command is not supported on virtual -end), FLT (filter-based), or ISL (interswitch link). These values are case-sensitive. slotnumber For bladed systems only, specifies the end monitors on a port at an interval of every 5seconds: switch:admin> perfmonitorshow --class EE 8 5 Showing EE monitors 8, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 434
0 0 0 0 Tx Rx ===== 0 0 0 0 Tx Rx ===== 0 0 0 0 To display cumulative filter monitor information on a port: switch:admin> perfmonitorshow --class FLT 8 There are 2 filter-based monitors defined on port 8. KEY ALIAS OWNER_APP FRAME_COUNT OWNER_IP_ADDR 0 IPFrame TELNET 0x0000000000000000 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 435
port. The default EE mask value upon power-on is Brocade FC4-48, the Area ID address field and the AL_PA ID address field must be masked together. On this blade, one bit of the AL_PA ID address field is used with the Area ID address field to identify the upper 32 ports. For example, ports 128 and 256 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 436
the destination ID mask, in quotation marks, in dd:aa:pp format. Examples To set the overall mask for end-to-end monitors on a port: switch:admin> perfsetporteemask 1/6 "00:00:00" "ff:ff:ff" "00:ff:ff" "ff:00:00" Changing EE mask for this port will cause ALL EE monitors - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 437
are displayed. CRC count is a 64-bit counter. The CRC count value is supported on all platforms. Refer to the Fabric OS Administrator's Guide for specific hardware support. Operands This command has the following operands: slotnumber For bladed on a port: switch:admin> perfshowalpacrc 2/4 ALPA - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 438
to trigger end-to-end monitors. The default value of the EE mask is all fields set Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), bladed systems. Use switchShow for a list of valid ports. Examples To display the end-to-end mask on a port: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 439
perfShowPortEEMask 2 RxSID ALPA: on RxDID Domain: on RxDID Area: on RxDID ALPA: on See Also perfAddEEMonitor, perfDelEEMonitor, perfSetPortEEMask Fabric OS Command Reference 413 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 440
on hardware platform. The maximum flows displayed are as follows: 32 For the Brocade 300, 5100, 5300, and FC8-xx port blades. 16 For the Brocade 4100, 4900, 5000, 7600, and FC4-xx port blades. 4 For the Brocade 7500. Top Talker supports two modes, Port Mode and Fabric Mode: • In Port Mode - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 441
. Valid values are between 1 and 32. If a value greater than 32 is entered, Top Talker displays counters for only 32 flows and a warning message. This operand Examples To add an F_Port Top Talker to blade 1 port 2 (which should be an F_Port): Switch:admin> perfttmon --add ingress 1/2 Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 442
101 pid Src_PID Dst_PID MB/sec 0xa908ef 0xa05200 6.926 0xa05200 0xa908ef 6.872 0xa905ef 0xa05200 6.830 0xa909d5 0xa05200 6.772 To delete the Fabric Mode Top Talker: Switch:admin> perfttmon --del fabricmode See Also none 416 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 443
pair and CSR generated... Installing Root Certificate... See Also If PKI objects already exist, the following message is displayed: switch:admin> pkicreate Pki objects already exist. If you want to regenerate new objects, remove current objects by running pkiRemove command with security disabled - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 444
key infrastructure (PKI) objects. Synopsis pkiremove Description Use this command to remove PKI objects including the switch private key, private key pass-phrase, CSR, root certificate, and switch certificate. Note The execution of this command is subject to Admin Domain restrictions that may be - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 445
Description Use this command to display PKI objects, such as switch private key, private key pass-phrase, CSR, root certificate, and switch certificate. Operands none Examples To view PKI objects: switch:admin> pkishow Passphrase : Exist Private Key : Exist CSR : Exist Certificate - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 446
security policies. You can configure a maximum of 32 Internet key exchange (IKE) and 32 Internet protocol security (IPSec) policies. Each FCIP tunnel -bit key. Advanced encryption standard, 128-bit key. Advanced encryption standard, 256-bit key. Specifies the authentication algorithm. The default - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 447
it uses 2048 bit values, but most secure. Security association lifetime in seconds. A new key is re-negotiated before the specified length of time expires. The valid range for seconds is 28800 to 250000000 or 0. The default is 28800. Examples To create a new policy: switch:admin> policy --create - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 448
10 Authentication Algorithm: SHA-1 Encryption: AES-128 Perfect Forward Secrecy: 0 Diffie-Hellman Group: 1 SA Life (seconds): 28800 To delete a policy: switch:admin> policy ike --delete 10 The policy has been successfully deleted. See Also portCfg, portCfgShow, portShow 422 Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 449
followed by a slash (/). portnumber Specify the port number to display, relative to its slot for bladed systems. Use switchShow to list valid ports. Examples To display the AL_PAs of a port: switch:user> portalpashow 4/14 AL_PA type AL_PA 0xe2 public 0xe4 type public AL_PA type See Also - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 450
needed to utilize the port at full bandwidth (depending on the port (not in long distance mode), the command displays the fixed distance based on port speed, for instance: 10 km (1 Gbps), 5 km is sent and then echoed back to the switch. LD mode supports distances up to 500 km. Distance measurement - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 451
the port groups of the switch. The following operands are optional: slotnumber For bladed systems only, specifies the for a port: switch:admin> portbuffershow 17 User Port Lx Max/Resv Buffer Needed Link Remaining Port Type Mode Buffers Usage Buffers Distance Buffers 16 - - 0 - - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 452
-based filter bladed systems. Use switchShow to list valid ports. This operand is optional; if omitted, information for all ports is displayed. Ports that support is primary. In this case portCamShow displays the following output: switch:user> portcamshow 7/39 Area SID used DID used SID entries - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 453
CAM utilization for all ports on a switch: switch:user> portcamshow Ports of Slot 9 Port SID used DID used SID free DID free 0 0 0 64 512 1 0 0 64 512 2 0 0 64 512 3 0 0 64 512 4 0 0 64 512 5 0 0 64 512 6 0 0 64 512 7 0 0 64 512 8 0 0 63 511 9 0 0 63 511 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 454
VLAN tagging and Class of Service (CoS). • Configure IP interfaces on the GbE port. • Configure static routes on the IP interface. • Manage registered the Fabric OS Administrator's Guide. Operands This command supports the following port options: slot For bladed systems only, specifies the slot - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 455
fciptunnel Creates Fibre Channel over IP (FCIP) tunnels. You can supported value is 80. -M Turns on default VC QoS mapping in the specified tunnel. Default is off. There are two ways of prioritizing network traffic over FCIP tunnels: Differentiated Services (DSCP) and Layer 2 Class of Service - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 456
on secure tunnels. Only a single route is supported on an interface with a secure tunnel. -v vlan_id Creates an FCIP tunnel with VLAN Tagging and Class of Service (CoS). Specify a vlan_id in the range between 1 and 4094. There is no default. If any other VLAN option is specified, this must - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 457
is 100. -r retransmissions Specifies the maximum retransmissions for the existing tunnel. Values are 1 to 16; default is 8. If tape pipelining is enabled, the default value is calculated based on the minimum retransmit time to ensure that the TCP connection does not time out before the host - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 458
network connection between two 7500 routers or two FC4-18i blades is configured by defining IP interfaces for origin and destination virtual ports, and then defining one or more IP routes to connect them. IPv6 addresses are supported on switches running v6.0 or later. The syntax for portCfg ipif - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 459
of the virtual port. iproute Defines static IP routes on a GbE port. After defining the IP interface of the remote switch, you can define destination routes on an interface. A maximum of 32 routes per GbE port are supported. IPv6 addresses are supported on platforms running v6.0.0 or later. The - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 460
IP ] mode The following operands are supported with the rscnsupr option: Specifies is zoned with this one. By default, RSCN suppression is disabled on all aid in troubleshooting common FC end-to-end communication problems. The Brocade 7500 routersor two Brocade 48000 directors with FR4-18i blades - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 461
L2 Class of Service/Priority, as defined by IEEE 802.1p. Range is 0-7. dst_ipaddr Optional destination IP address (IPv4 or IPv6). All packets destined for this IP address are tagged accordingly. If a destination IP Address is not specified, all packets not already tagged will be tagged. Default is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 462
to enable or disable FICON emulation in an FCIP tunnel and modify associated parameters onan FCIP tunnel on a 'virtual' E_Port. This command is supported only on a Brocade 7500/FR4-18 platform. A feature key is required to enable any of the FICON emulation processing. The tunnel must be down or - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 463
the opposite side. The default value is 16. The range is 1-32. -e |--wrtTimer value Defines what the network and device can support. Too small a value limits pipelining performance. default value is 3 (3000000 bytes) The range is 1 Mb-5 Mb. -o |--oxidBase value Defines the base value of an entry pool of 256 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 464
2 portCfg -f |--dbgFlags value Defines optional debug flags. The default is 0xF7C80000. This parameter is primarily for use by technical support personnel. ftrace FTRACE is a debug tool primarily for Tech Support personnel. It is implemented as a subcomponent of the VEnEmulation feature. It - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 465
.255.255.0 1500 Operation Succeeded To create an IP interface using IPv6 with a prefix: switch:admin> portcfg ipif 8/ge0 create 2000::800:3333:1234/64 1500 Operation Succeeded To create a static IP route using IPv4: switch:admin> portcfg iproute ge0 create 172.16.123.231.255.255.0.0 192.168.255.25 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 466
vlantag8/ge0 delete 192.168.10.1 100 To configure an FCIP Tunnel 1 with FICON XRC and FICON Tape Write Pipelining Emulation features enabled using all default parameter arguments: switch:admin> portcfg ficon ge0 1 -x 1 -w 1 To configure FTRACE with ACo disabled and FTRACE enabled on port ge0/tunnel - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 467
range of ports to either 0x0 (default) or 0x13. Changes made by this command are persistent across switch reboots and power cycles. Note The execution of this this command displays the usage. The following operands are supported: slot For bladed systems only, specify the slot number of the port - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 468
configured as long distance ports can utilize the credit recovery feature. The default credit recovery configuration is enabled. Note The execution of this command usage. Examples To enable credit recovery on a port: switch:admin> portcfgcreditrecovery --enable 3/15 To disable credit recovery - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 469
of the port to be reset to default, relative to its slot for bladed systems. Use switchShow to list valid ports. Examples To reset a port to factory defaults: switch:admin> portcfgdefault 1/3 To reset a GbE port to factory defaults: switch:admin> portcfgdefault 8/ge1 See Also portCfgEPort - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 470
switches, the maximum routing paths are limited to 16 E_Ports. Notes Changes made by this command are persistent across switch reboots or power slot for bladed systems. Use switchShow to display a list of valid ports. mode Specify 1 to enable the port as an E_Port. This is the default port state - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 471
negotiated values indicated by "(N)" next to them. The negotiated values are what the edge switch specifies in the ELP request. If the state is "Not OK", the R_A_TOV and E_D_TOV display "Not Applicable". By default, all EX_Ports are auto-ELP enabled. If the Fabric Parameter attribute value is "User - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 472
command displays the usage. The following operands are supported: slotnumber Specifies the slotnumber on enterprise-class platforms error message is posted, and the command fails. Valid values are as follows: 0 Brocade Native mode. 1 McDATA Open Fabric mode. 2 McDATA Fabric mode. Note that this - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 473
disables Insistent Domain Id (IDID) for the specified EX_Port. Specify 1 to enable IDID, specify 2 to disable IDID. This command must be issued from a McDATA edge switch attached to a single or dual FCR configuration. Examples To set the fabric ID of port 2/1 to 5 and the port ID format to core - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 474
are persistent across switch reboots or power cycles. Note The to be configured, relative to its slot for bladed systems. Use switchShow to display a list of default port state. Mode must be preceded by a comma. This operand is required. Examples To configure port as a locked G_Port: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 475
firmware versions that do not support it. Notes The long distance modes L0.5, L1, and L2 are no longer supported in v5.3.0 or later. Changes made by portCfgISLMode are persistent across switch reboots and power to display, relative to its slot for bladed systems. Use switchShow to list valid ports - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 476
2 portCfgISLMode To disable ISL R_RDY mode on a port: switch:admin> portcfgislmode 1/3, 0 See Also configure, portCfgLongDistance, portCfgShow 450 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 477
full size frame buffers on a particular port or to support a long distance link up to 500 km. The port can only be used as an E_Port. Changes made by this command are persistent across switch reboots and power is not backward compatible with firmware versions that do not support it. Ctrl-D cancels - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 478
. The buffer credits for the given E_Port are automatically configured based on the actual link distance. Up to a total of 1452 full-size frame buffers are reserved depending on the distance measured during E_Port initialization. Fabric OS v6.0 or later supports up to 500 km at 1 Gbps, up to 250 km - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 479
portCfgLongDistance 2 Unknown: 0 Lli: 9 Proc_rqrd: 0 Timed_out: 0 Rx_flushed: 0 Tx_unavail: 0 Free_buffer: 0 Overrun: 0 Suspended: 0 Parity_err: 0 2_parity_err: 0 CMI_bus_err: 0 Loss_of_sync: 0 Loss_of_sig: 9 Protocol_err: 0 Invalid_word: 0 Invalid_crc: 0 Delim_err: 0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 480
the L_Port as a regular public L_Port. This operand is optional; if omitted; the default value of 0 is used. Private devices are supported only on Brocade enterprise-class platforms with FC2-16 and FC2-16 blades. On all other platforms, option 1 is blocked. duplex_mode Specify 2 to configure the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 481
.. .. Rate Limit .. .. .. .. Credit Recovery .. .. .. .. ... ON ON ON ... where AN:AutoNegotiate, ..:OFF, ??:INVALID. To display the L_Port conditions: switch:admin> portcfglport [output from other slots suppressed] Ports of Slot 4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Locked L_Port - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 482
requests. By default, NPIV is enabled on all Condor and Golden-eye-based ports. It can be selectively enabled or disabled on switch ports using this port Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. mode Specify - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 483
EX Port Mirror Port Rate Limit Credit Recovery where AN:AutoNegotiate, ..:OFF, ??:INVALID. LM:L0.5 To disable NPIV functionality on a port: switch:admin> portcfgnpivport 1/3 0 See Also configure, portCfgDefault, portCfgShow Fabric OS Command Reference 457 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 484
comes online if it is connected to an enterprise fabric switch that supports NPIV. Notes NPIV capability should be enabled on the ports enable or disable as N_Port mode Displays current agmode setting for the switch. The default value for mode is 0 (disabled) and if the value 1 (enabled). - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 485
all ports on the switch. Persistently disabled ports remain disabled across power cycles, switch reboots, and switch enables. By default, a port is (/). port Specify a port number to configure, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 486
all ports on the switch. Persistently enabled ports remain enabled across power cycles, switch reboots, and switch enables. By default, a port is (/). port Specify a port number to configure, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 487
portCfgPersistentEnable 2 See Also ficonCupSet, ficonCupShow, portDisable, portEnable, portCfgPersistentDisable, portCfgShow, portShow, switchShow Fabric OS Command Reference 461 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 488
Service (AN/QoS) on a port, to set or reset the ingress rate limit for the specified port, and to set the default switch link (ISL). QoS configuration is persistent across system reboots. Operands This command has the following operands: slot For bladed rate in Mbps. Supported values for -- - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 489
--disable 3/15 To set the ingress rate limit on a port to 2 Gbps: switch:admin> portcfgqos --setratelimit 3/15 2000 To set the default QoS configuration on a port: switch:admin> portcfgqos --default 3/15 See Also portCfg, portCmd, portShow, switchShow, configure : PortCfgQos 2 Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 490
configuration settings for all ports on a switch, except gigabit Ethernet (GbE) ports • IP interfaces on the GbE port • Static routes on the IP interfaces • Fibre Channel over IP (FCIP port is configured to use a 0x0 AL_PA address (default). Displays ON when the address configuration is 0x13 AL_PA. - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 491
value is set by the portCfgNPIVPort command. QOS E_Port Displays ON when Quality of Service (QoS) is enabled on the port. Displays (..) or OFF when QoS is disabled. By default, QoS is enabled by best effort based on availability of buffers. This value is set by the portCfgQos command. EX_port - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 492
supports the following port options: slot For bladed IP interface for both ports of the tunnel. IPv6 addresses are supported. iproute Displays the IP route on the specified GbE port. IPv6 addresses are supported settings on an enterprise-class platform: switch:admin> portcfgshow Ports of Slot 2 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 493
portCfgShow 2 Rate Limit Credit Recovery ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON Ports of Slot 2 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 Speed AN AN AN AN AN AN AN AN AN - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 494
configuration settings for a single port: switch:admin> portcfgshow 2/16 Area Number: 144 Speed Level: an explanation of the displayed parameters): switch:admin> portcfgshow 10/ge0 Mode: FCIP Persistent Disable: OFF Ipif configuration: Interface IP Address NetMask MTU 0 192.168 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 495
VLAN tagging on a GbE port. Refer to the portCfg help page for an explanation of the displayed parameters. switch: admin> portcfgshow vlantag 8/ge0 Port: 8/ge0 IpIfAddress VlanId L2 CoS Dest IP Address Flags 192.168.10.1 100 7 192.168.10.1 App 192.168.10.1 100 3 0.0.0.0 Perm See Also - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 496
configuration is saved in nonvolatile memory and is persistent across switch reboots or power cycles. Notes This configuration cannot be set on VE Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. speed_level Specify - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 497
switchCfgTrunk to enable or disable trunking on all ports of a switch. When the command is executed to update the trunking configuration portnumber Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. portnumber-portnumber - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 498
a port as a VEX_Port connected to an FC-IP and sets and displays VEX_Port configuration parameters. portcfgvexport negotiated values are what the edge switch specifies in the ELP request. If the state is "Not OK", R_A_TOV and E_D_TOV display "Not Applicable". By default, all VEX_Ports are auto-ELP - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 499
, and the command fails. Valid values are as follows: 0 Brocade Native mode. 1 McDATA Open Fabric mode. 2 McDATA Fabric mode. 16: switch:admin> portcfgvexport 2/16 Port 2/16 Admin: State: Pid format: Edge Fabric ID: Front Domain ID: Front WWN: Principal Switch: info enabled OK core(N) 16 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 500
: N/A To set the fabric ID of port 2/21 to 5 and the port ID format to core: switch:admin> portcfgvexport 2/21 -f 5 -p 1 To configure port 2/20 as a VEX_Port and set the fabric ID to 4: switch:admin> portcfgvexport 2/20 -a 1 -f 4 To disable fabric parameter negotiation on port 2/20 of a VEX_Port - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 501
a destination IP host from an intelligent GbE port. Notes Virtual LAN (VLAN) tagging is supported on the Brocade FR4-18i port number of the GbE port on the blade. --ipperf Determines the path characteristics to the remote host default value is 0. Fabric OS Command Reference 475 53-1000599- - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 502
default is 64 bytes. In an IPv4 environment, the ICMP/IP header occupies 28 bytes. In an IPv6 environment, it occupies 48 bytes.The total size, including ICMP/IP headers (28 or 48 bytes without IP options) cannot be greater than the IP the IP header and payload. Note: There is limited support for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 503
a fixed size in bytes. The default is 64 bytes. In an IPv4 environment, the ICMP/IP header occupies 28 bytes. In an IPv6 environment it occupies 48 bytes.The total size, including ICMP/IP headers (28 or 48 bytes without IP options) cannot be greater than the IP MTU configured on the interface. This - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 504
trace route packet to use. The default is 64 bytes. In an IPv4 environment, the ICMP/IP header occupies 28 bytes. In an IPv6 environment, it occupies 48 bytes. The total size, including ICMP/IP headers (28 or 48 bytes without IP options), cannot be greater than the IP MTU configured on the interface - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 505
Specify the verbose level to be set for port modules; valid values are 1 to 5. Examples To set debug level and verbose level of port modules: switch:admin> portdebug 3 4 See Also dbgShow Fabric OS Command Reference 479 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 506
Specify a port number to be disabled, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. Examples To disable a port: switch:admin> portdisable 2/4 See Also portCfgPersistentDisable, portCfgPersistentEnable, portEnable, portShow, switchShow 480 Fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 507
be sent to indicate a state transition: RSCN, SNMP trap, Web pop-up window. This command fails if the port's switch is disabled, the port's blade is not fully enabled (faulted, powered off, or disabled), or if the port is persistently disabled. Notes The front panel LED of an enabled and online - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 508
loss sig Loss of signal frjt Frames rejected with F_RJT fbsy Frames busied with F_BSY Operands none Examples To display error counters for ports on a switch: switch:admin> porterrshow frames enc crc too too bad enc disc link loss loss frjt fbsy tx rx in err shrt long eof out c3 fail - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 509
the port is active, and the port type. Operands none Examples To display the port status for all ports in the switch: switch:user> portflagsshow Slot Port SNMP Physical Flags 1 0 Online In_Sync PRESENT ACTIVE E_PORT G_PORT LOGIN LED ACCEPT 1 1 Online In_Sync PRESENT ACTIVE E_PORT - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 510
to exercise the user port LEDs in the current switch on and off by setting the ATTN LEDs to for legacy reasons only and is longer supported on most current platforms. On some of Specify the number of times to perform this test. The default value is 10. -ports itemlist Specify a list of user ports - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 511
1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To clear the port log: switch:admin> portlogclear switch:admin> portlogshow port log is empty See Also portLogDump, portLogShow Fabric OS Command Reference 485 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 512
"Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To display the current port log configuration: switch:admin> portlogconfigshow max portlog entries = 8192 See Also portLogResize 486 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 513
be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To display the port log facility: switch:admin> portlogdisable See Also portLogEnable Fabric OS Command Reference 487 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 514
. For a full explanation of the information displayed by this command, refer to the Fabric OS Administrator's Guide. Operands This This operand is optional. Examples To display the port log for a port: switch:user> portlogdump 20 time task event port cmd args 08:35:27.899 tShell - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 515
firmware which can save up to 8,192 entries. Refer to portLogConfigShow to display the current port log size. Once the log is full, the newest log entries displace the oldest log entries. Port logs capture switch-to-device, device-to-switch, switch-to-switch, some device-to-device1, and control - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 516
be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To enable the port log facility: switch:admin> portlogenable See Also portLogDisable 490 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 517
0 10 Rx1 0 11 Rx2 0 12 Rx3 0 13 stats 0 14 scn 0 15 pstate 0 16 reject 0 17 busy 0 18 ctin 0 19 ctout 0 20 errlog 0 21 loopscn 0 22 create 0 29 read 0 30 write 0 48 cmd 0 49 event 0 50 msg 0 51 switch 0 52 ficonq 0 (output truncated) See - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 518
default frame size for this login. cos Class of Services supported. This can be a combination of the following bits: 4 Class 2 is supported. 8 Class 3 is supported to its slot for bladed systems. Use switchShow for (type fe) and two PLOGIs): switch:admin> portloginshow 23 Type PID World - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 519
" for details. Operands This command has the following operand: 0|1 Specify 0 to clear or 1 to set the debug_pdisc_flag. The default is 0. Examples To set the debug_pdisc_flag: switch:admin> portlogpdisc 1 PDISC log setting = 1 See Also none Fabric OS Command Reference 493 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 520
may be in place.Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To enable the port log: switch:admin> portlogreset See Also none 494 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 521
number of port log entries. The valid range of values is 32,768 to 65,536 for the Brocade 48000 and the Brocade 7500. For all other platforms, the range is 8,192 to 16,384. Examples To resize the portlog: switch:admin> portlogresize 12288 See Also portLogConfigShow Fabric OS Command Reference - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 522
are circular log files in the switch firmware, which can save up to 32,768 entries. Refer to portLogConfigShow time in milliseconds. The clock resolution is 16 milliseconds. Task Displays the name of the busied. ctin A CT based request is received. ctout A CT based response is transmitted. - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 523
portLogShow 2 sn fcin fcout read write err frame nsRemQ rscn xalloc xfree xerr xstate payload Port Cmd ioctl Tx & Rx scn pstate ctin fc f8 ctout errlog loopscn OLP LIP LIM BMP OLD TMO Args start disable Speed negotiation states. Incoming Fibre Channel information unit. Outgoing Fibre Channel - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 524
reject reason. FC-PH busy reason. Argument 0 is divided into two 16-bit fields: [A] a bit map indicating whether subsequent arguments are valid (0001 means argument 1 is valid, 0003 means arguments 1 and 2 are valid). [B] the CT-based service command code. Argument 1 is the first word of the CT - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 525
portLogShow 2 Codes used in various fields are as follows: state 1 Online 2 Offline 3 Testing 4 Faulty 5 E_Port 6 F_Port 7 Segmented pstate AC Active State LR1 Link Reset: LR Transmit State LR2 Link Reset: LR Receive State LR3 Link Reset: LRR Receive State LF1 Link - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 526
that cause a fault. The count is ignored when the saved log is displayed. This operand is optional. . Examples To view the port log for a port: switch:user> portlogshow 24 time task event port cmd args 17:05:30.384 PORT Rx 0 40 02fffffd,00fffffd,08fbffff,14000000 17:05:30.384 PORT - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 527
has the following operands: portid Specify the number of the port for which to display the log. Examples To display a port log for port 14: switch:user> portlogshowport 14 time task event port cmd args 08:35:28.483 tFabric scn 14 0 08:35:27.899 tShell pstate 14 OL1 08 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 528
values corresponding to different log types can be obtained by running portLogEventShow. Examples To disable event 2 from reporting to the port log: switch:admin> portlogtypedisable 2 See Also portLogDisable, portLogEventShow, portLogTypeEnable 502 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 529
be enabled. The values corresponding to different log types can be obtained by running portLogEventShow. Examples To enable event 2 to report to the port log: switch:admin> portlogtypeenable 2 See Also portLogEventShow, portLogTypeDisable Fabric OS Command Reference 503 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 530
portloopbacktest [--slot number][-nframes count][-lb_mode mode][-spd_mode mode] [-ports itemlist] Description Use this command to verify the functional operation of the switch by sending frames from the port N transmitter and looping them back into the same port N receiver. The loopback is done at - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 531
ports to test. By default, all of the blade ports in the specified slot (--slot) are used. See itemList for more information on the itemlist parameter. Examples To run a functional test of a connection: switch:admin> portloopbacktest -ports 1/10-1/20 -nframes 1 -lb_mode 1 Running Port Loopback - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 532
2 portLoopbackTest Diagnostics Following are possible error messages if failures are detected: DATA ERRSTAT INIT PORTDIED STATS TIMEOUT XMIT Refer to the Fabric OS Message Reference for more information. See Also itemList 506 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 533
or another switch (i.e. another blade has an E_Port leading to another switch). A port mirroring connection on FL_Ports mirrors all traffic originating from or terminating at this FL_Port. Port mirroring does not support ALPA granularity port mirroring. A mirror connection can be rejected because - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 534
supported on the following platforms: Brocade 4100, Brocade 4900, Brocade 7600, and Brocade is located, relative to its slot for bladed systems. Use switchShow for a list of valid Examples To configure a port as a mirror port: switch:admin> portcfg portmirror 2/1 --enable Please confirm enable of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 535
portMirror 2 To delete a port mirror connection between a local switch port and a remote switch port: switch:admin> portmirror --delete 0x011400 0x240400 To display port mirror connections: switch:admin> portmirror --show Number of mirror connection(s) configured: 2 Mirror_Port SID DID State - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 536
port name persists across reboots and power cycles. It is not affected be configured, relative to its slot for bladed systems. Use switchShow to display a list name is a character string up to 32 characters, including spaces and characters, 8: switch:admin> portname 1/3, "Tape drive 8" switch:admin> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 537
The data is displayed in 8 or 16 columns, one column per port plus in seconds, between each sample. Default is one second. This operand is link may not match the output on the device port. Examples To display port throughput for a switch: switch:user> portperfshow 20 0 1 2 3 4 5 6 7 8 9 10 11 12 13 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 538
set of looped devices) attached to the local switch. ports_bitmap The format of ports_bitmap is the bit maps in the other tables; however, this table typically has only Bit 16 set (value 0x10000), indicating this port always routes broadcast frames to the embedded port, for handling by the firmware - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 539
portRouteShow 2 Examples To display the routing tables for a port: switch:user> portrouteshow 4/15 port address ID: 0x02bf00 external unicast routing table: 1: 0x4 (vc=3) 2: 0x10000 (vc=0) internal unicast routing table: 60: 0x8000 (vc=2) 63: 0x1000 (vc=5) - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 540
ARP) entries • IP interfaces on the GbE port • Static routes on the IP interfaces • Fibre Channel over IP (FCIP) tunnel configuration disabled by portDisable or portCfgPersistentDisable. portCFlags Port control flags. portFlags A bit map of port status flags, including information on the type of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 541
generation number for the last offline state change. portId The port's 24-bit port ID. portIfId The user port's interface ID. portWwn The port's and the WWN of the front domain. Pr Switch Info Information on the principal switch of the edge fabric attached to this EX_Port. Includes the domain - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 542
NONE or DH-CHAP. DH-CHAP is the only authentication type supported on EX_Ports. DH Group Displays DH group [0-4] if DH-CHAP , displays N/A. Edge fabric's primary WWN If the EX_Port is connected to an edge switch with FCS policy enforcement, the WWN of the primary FCS is displayed when the edge - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 543
to the port is shown in the output. This command supports the following port options: slot For bladed systems only, specify the slot number of the port to is displayed. fciptunnel Displays FCIP tunnel IDs, remote and local IP addresses, remote and local WWNs, compression status, FCIP fastwrite - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 544
Block. -mem adrs Displays memory in 256 byte increments: ! for next. a debug tool for developers and support (not intended for customer use). the state of a port: switch:admin> portshow 3/15 portName: : 1 Online portPhys: 6 In_Sync portScn: 64 Segmented port generation number: 12 portId: 022f00 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 545
: 3 Port part of other ADs: No To view xlate domains, you must be running a Brocade 7500 or 48000 with an FC4-18i blade. Note that the Front Domain ID is what is shown: switch:admin> portshow 8/4 portName: portHealth: No Fabric Watch License Authentication: None EX_Port Mode: Enabled Fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 546
IP Address NetMask MTU 1 192.168.60.101 255.255.255.0 2348 Interface IP Address NetMask MTU 2 192.168.60.102 255.255.255.0 1260 Interface IP .27 0 Interface, 172.16.123.231 255.255.0.0 192.168.255.25 1 To display ISCSI Port WWN and Sessions: switch:admin> portshow iscsi 2/ge0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 547
and to show the current DiffServ markings being used for data connection as well as control connection: switch:admin> portshow fciptunnel 9/ge0 0 -params Slot: 9 Port: ge0 Tunnel ID 0 Remote IP Addr 10.62.0.100 Local IP Addr 10.10.9.100 Remote WWN Not Configured Local WWN 10:00:00:05:1e:39:d4 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 548
on an FCIP tunnel: switch:admin> portshow fciptunnel 9/ge0 0 -perf Slot: 9 Port: ge0 Tunnel ID 0 Remote IP Addr 10.62.0.100 Local IP Addr 10.10.9.100 avg 29286242 compressed Bytes 2065 Bps 30s avg, 3695 Bps lifetime avg 1.64 compression ratio FC control traffic TCP connection: Local 10.10.9.100:4099 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 549
-Shared Key testingFIPSandIPSec To display the connection IPSec information on an FCIP tunnel on a GbE port: switch:admin> portshow fciptunnel 9/ge0 0 -ipsec Slot: 9 Port: ge0 Tunnel ID 0 Remote IP Addr 10.62.0.100 Local IP Addr 10.10.9.100 Remote WWN Not Configured Local WWN 10:00:00:05:1e:39:d4 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 550
display the FC data path credit data: switch:admin> portshow fciptunnel 9/ge0 0 -credits Slot: 9 Port: ge0 Tunnel ID 0 Remote IP Addr 10.62.0.100 Local IP Addr 10.10.9.100 Remote WWN Not iac_credits_total: 26366 iac_credits_posted: 32 iac_credits_queued: 0 iac_max_credits_queued: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 551
portShow 2 ip_api_data_credit_target = 32 ip_api_data_credit_ratio = 80 ip_api_credit_time = 15 ip_api_cwnd_overcommit To display QoS Mappings: switch:admin> portshow fciptunnel 9/ge0 0 -qosmap Slot: 9 Port: ge0 Tunnel ID 0 Remote IP Addr 10.62.0.100 Local IP Addr 10.10.9.100 Remote - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 552
2 portShow This command displays the same information as the previous but posts selected statistical areas: switch:admin> portshow ficon ge0 all -fdcb 10008000 -clear See Also authUtil, portCfg, portCfgLongDistance, portLoginShow, portName, switchShow 526 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 553
portStats64Show 2 portStats64Show Displays the 64-bit hardware statistics for a port. Synopsis portstats64show [slotnumber/]portnumber Description Use this command to display the following hardware statistics for a port. Two integers are reported for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 554
transmitted. stat64_inputBuffersFull Occasions on which input buffers are full. stat64_rxClass1Frames Class 1 frames received. Note The slot for bladed systems. Use switchShow to display a list of valid ports. Examples To display the 64-bit hardware statistics for a port: switch:user> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 555
portStats64Show 2 er_bad_eof 0 top_int : Frames with bad end-of-frame 0 bottom_int : Frames with bad end-of-frame er64_enc_out 0 top_int : Encoding error outside of frames 9131157 bottom_int : Encoding error outside of frames er64_disc_c3 0 top_int : Class 3 frames discarded 0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 556
's quad, including ALPA-based CRC monitor, End-to-End monitor, and Filter-based performance monitor statistics. Inter-Switch Link (ISL) monitor for details. Operands This command has the following operands: slot For bladed systems only, specify the slot number of the port to be cleared - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 557
. Synopsis portstatsshow [slotnumber/]portnumber portstatsshow [ge | ip | fcip ] [slotnumber/]geportnumber [ipaddress | tunnelnumber and display only with those platforms and ports. All statistics have a maximum 32-bit value of 4,294,967,295. The command output includes the following fields: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 558
its slot for bladed systems. Specify the IP address. fcip Displays the GbE statistics on all FCIP tunnels. tunnelnumber Optionally specify a tunnel ID to display statistics only for the specified FCIP tunnel. Examples To display the basic set of statistics for port 1/0 on a DCX backbone: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 559
the tenancy zero tenancy To display GbE port statistics for slot 8 and GbE port 1: switch:admin> portstatsshow ge 8/ge1 ge_stat_tx_frms ge_stat_tx_octets ge_stat_tx_ucast_frms ge_stat_tx_mcast_frms ge_stat_tx_bcast_frms ge_stat_tx_vlan_frms ge_stat_tx_pause_frms ge_stat_rx_frms ge_stat_rx_octets - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 560
pkts 0 ve to fcip_entity bytes To display port statistics for all IP addresses, slot 8, and GbE port 1: switch:admin> portstatsshow ip 8/ge1 ip_err_crc ip_err_hdr_cksum ip_err_tcp_data_chksum 0 IP CRC Errors 0 IP Checksum Errors 0 IP TCP Data Checksum Errors To display port statistics for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 561
using portSwapEnable. The result of this operation is persistent across reboots and power cycles. To undo a previous port swap, execute portSwap again on the relative to its slot for bladed systems. Examples To swap area numbers between a pair of ports: switch:admin> portswap 1/3 2/5 portswap - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 562
The disabled state of the portswap feature is persistent across reboots and power cycles. Enabling or disabling the portswap feature does not affect previously . Operands none Examples To disable the portswap feature: switch:admin> portswapdisable See Also portSwap, portDisable, portEnable, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 563
The enabled state of the portswap feature is persistent across reboots and power cycles. Enabling or disabling the portswap feature does not affect previously . Operands none Examples To enable the portswap feature: switch:admin> portswapenable See Also portSwap, portDisable, portEnable, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 564
portswap feature, as well as port and area information for ports whose area number differs from the default area number. The default area number of a port is the same as its switch port number. Operands none Examples To display the enabled state of the portswap feature and information for ports - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 565
to isolate problems to a single replaceable element and isolate problems to near- . Only the following port types are supported: • E_Ports • F_Ports (must support ELS Echo) • L_Ports • N->N of user ports to test. By default, all the user ports in the switch are tested. Refer to itemList help - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 566
dataTypeShow command to view the types of pattern that are supported with portTest. The default pattern type, if no pattern number is specified, is RANDOM default). -2 All L_Ports. -3 All F_Ports. -4 All E_Ports. -5 All N->N loopback ports. Examples To run a functional test on an active switch: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 567
operand: -ports itemlist Specify a list of user ports to test. By default, all user ports in the current slot is assumed. Refer to the help page for further details. Examples To display information from portTest: switch:admin> porttestshow 1 Port 1 : PASS PortType: OTHER PortInternalState: - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 568
F_Port trunking interoperates between the Access Gateway (AG) and Condor-based platforms. It is designed to (1) prevent reassignments of virtual . TA On standalone switches, displays the user assigned TA number. DA On standalone switches, displays the default port area. The default area can be a - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 569
AG mode is enabled. This command is supported only on Brocade 48000 and Brocade DCX enterprise-class platforms running Fabric OS v6.1 or later. For Firmware compatibility and upgrade/downgrade considerations, refer to the Fabric OS Administrator's Guide. The execution of this command is subject - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 570
index for the static TA to be created. The port index must fall within the 8 port trunk group starting from port 0 on a switch or blade. The TA must be a default index of an existing port in a given port group. However, you may add ports to the trunk group even when a trunk group has - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 571
TA. 2. Enable Trunk Area for ports 36 - 39 with area number 37: switch:admin> porttrunkarea --enable 36-39 -area 37 Trunk area 37 enabled for ports 36 5 -6 6 -7 7 -8 8 id 9 9 -10 10 -11 11 -12 12 -13 13 -14 14 -15 15 -16 16 -17 17 -18 18 -19 19 -20 20 -21 21 -22 22 -23 23 -24 24 -25 25 -26 26 -27 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 572
2 portTrunkArea 32 32 id 33 33 id 34 34 id 35 35 id 36 36 id F-Port 20:14:00:05:1e:41:4b:4d 20:15:00:05:1e:41:4b:4d 20:16:00:05:1e:41:4b:4d 2 NPIV public 5. Display TA enabled port configuration: switch:admin> porttrunkarea --show enabled Port Type State Master TA DA 36 -- -- -- 37 36 37 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 573
:admin> portenable 10/14 5. Show the TA port configuration after enabling the ports: switch:admin> porttrunkarea --show enabled Slot Port Type State Master TI DI 10 13 F-port Master 10/13 125 125 10 14 F-port Slave 10/13 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 574
-zoning mode, in which all devices see each other. When default zoning is enabled with "No Access" mode, "No Effective displayed. Operands none Examples To display the zone membership information of ports: switch:user> portzoneshow [OUTPUT TRUNCATED] PORT: 160 (160) Offline PORT: 161 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 575
blades can be powered up. The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and Appendix A, "Command Availability" for details. Operands none Examples To modify the power-off list order: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 576
2 3rd slot to be powered off: (3..10) [8] 3 4th slot to be powered off: (4..10) [7] 4 5th slot to be powered off: (7..10) [7] 10 6th slot to be powered off: (7..9) [8] 9 7th slot to be powered off: (7..8) [8] 8 8th slot to be powered off: (7..7) [7] 7 Old POL New POL Power Off Order 10 1 1st - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 577
power causes the CP board processors to cease executing the firmware. For example, if only one power supply is available to power a fully loaded system and the power on the hardware platform. Control processor (CP) blades are not included in the power-off list. The execution of this command is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 578
but faulty (no power cable, power switch turned off, fuse blown, or other internal error). For certain switch models, the OEM serial ID data displays after each power supply status line. Operands none Examples To view the status of the power supplies: switch:admin> psshow Power Supply #1 is OK - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 579
is in sync, and reboot -f is issued on the Active CP of a director, the Standby CP takes over as the active CP without traffic disruption. If HA fail over to the Standby CP: switch:admin> reboot -f Warning: This command is being run on a control processor (CP) based system and will cause the active - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 580
To display a list of routing-related commands: switch:admin> routehelp aptpolicy bcastshow dlsreset dlsset dlsshow fspfshow delay for the in-order delivery (IOD) Resets the user-defined IOD delay settings to default values Displays the user-defined IOD delay settings in the fabric. Set or print the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 581
switches running earlier versions of Fabric OS (up to v5.3.0), the maximum is 256 Kilobytes. Notes The effective security DB size is the lowest supported CP that runs Fabric OS v6.0.0. The Brocade 200E is unable to handle the maximum DB size supported in v6.0.0 and issues a compact flash warning - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 582
, when the command is completed new data is saved persistently. New data is effective with the next authentication request. The configuration applies to a switch instance only. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 583
peer that authenticates to peer. 3. Local secret: The local secret that authenticates peer. Press Enter to start setting up shared secrets > Enter WWN, Domain, or switch name (Leave blank when done): 10:00:00:60:69:80:05:14 Enter peer secret: Re-enter peer secret: Enter local secret: Re-enter - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 584
] [-ipaddr IP address] [- switch, including Public Key Infrastructure (PKI) based supports IPV4 and IPV6 addresses. Use this command to do the following: • Generate a public/private key pair. • Delete a public/private key pair. • Generate a CSR. • Delete a CSR. • List existing certificates on a switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 585
, enter either 1024 or 2048 bits. The greater the value, the is the IP address of the switch. -country country San Jose". If the locality consists of multiple words, it must be enclosed in double quotes. -org organization Specifies the organization. Provide the full name, for example, Brocade - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 586
input. -ldapcacert file name Exports an LDAP CA certificate from the switch to a remote host. -certname certificate name Specifies the name of Specifies the protocol as either FTP or SCP. -ipaddr IP address Specifies the IP address of the remote host. -remotedir remote directory Specifies - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 587
IP address Specifies the IP address PKI-based certificates on the switch. The switch:admin> seccertutil gencsr Country Name (2 letter code, eg, US):US State or Province Name (full name, eg, California):California Locality Name (eg, city name):San Jose Organization Name (eg, company name):Brocade - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 588
San Jose" \ -org Brocade -orgunit software -cn 192.168.38.206 generating CSR, file name is: 192.168.38.206.csr Done To delete the CSR in interactive mode: switch . To import a PKI-based certificate with configure and enable option in non-interactive mode: switch:admin> seccertutil import -config - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 589
-login abcd -passwd passwd -certname ldap.cer Success: exported LDAP certificate To delete an LDAP CA certificate in interactive mode: switch:admin> seccertutil delete -ldapcacert filename.pem WARNING!!! About to delete certificate: filename.cer ARE YOU SURE (yes, y, no, n): [no] y Deleted - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 590
running Fabric OS v6.0.0 and later, the maximum security database size is 1 MB. For switches running earlier versions of Fabric OS (up to v5.3.0), the maximum is 256 KB. The effective security DB size is the lowest supported by the fabric. The presence of a Standby CP that runs an earlier version of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 591
primarily for debugging purposes by technical support staff. The information displayed may not be supported between releases and is subject to Empty Primary Version 0 Primary WWN 10:00:00:05:1e:01:23:e0 (local switch) Stamp 0 ----The latest zone transaction-last retVal from zone: not used last zone - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 592
2 secGlobalShow Security Defined DataSize 35 bytes Define Sum 215b Zone Size (include enabled configuration) 312 bytes Zone sum e04b215b sec_db: free primaryDLPhase 0 ----wwnDL State----- pid tid key sec usec --------- LOG CACHE --------14:08:50 813905136 secipadm_ipchange receives - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 593
of existing policies Moves a member in the FCS policy Removes members from an existing policy Saves defined policy set and sends to all switches Shows members of one or more policies Resets security statistics Displays security statistics See Also none Fabric OS Command Reference 567 53-1000599 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 594
to abort changes to policy creation and modification operations from all the switches if a fabric-wide consistency policy is not set for the particular Policy is enabled, this command can be issued only from the Primary FCS switch. Only the user who made the changes to the defined database may use - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 595
is the same for tolerant and strict fabric-wide consistency. When FCS Policy is enabled, this command can be issued only from the Primary FCS switch. Any modifications to the SCC, DCC, and FCC DB are saved and activated. When secPolicyActivate is issued after the secPolicySave command, it might fail - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 596
Primary FCS switch. The secpolicyadd command can be issued on all switches for SCC switches typically cannot modify the policy. However, if the Primary FCS switch in the policy list is not reachable, then a backup FCS switch a list of one or more member switches for the security policy. The members - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 597
by WWN address: • FCS_POLICY • SCC_POLICY These policy types require members be specified as WWN strings, domain IDs, or switch names. If domain ID or switch names are used, the switches associated must be present in the fabric or the command fails. DCC_POLICY Members The DCC_POLICY_nnn is a list of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 598
All policies can be created only once, except for the DCC_POLICY_nnn. Each DCC_POLICY_nnn must have a unique name. This command can be issued on all switches in the current fabric for SCC and DCC policies if they are not intended to be fabric-wide. Adding members while creating a policy is optional - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 599
and all devices attached to those ports. [1-3, 5] Selects ports 1 through 3 and 5 and all devices attached to those ports. [*] Selects all ports on the switch and devices currently attached to those ports. SCC_POLICY and FCC_POLICY Members This policy type requires member IDs to be specified as WWN - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 600
> secpolicyshow ACTIVE POLICY SET DEFINED POLICY SET 2. Identify switches in the fabric. switch:admin> fabricshow Switch ID Worldwide Name Enet IP Addr FC IP Addr Name 2: fffc02 10:00:00:05:1e:39:5f:67 10.32.69.53 10.20.30.53 "NeptuneSec" fec0:60:69bc:60:260:69ff:fe80:d4a 4: fffc04 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 601
policy is deleted all access is granted. Notes When an FCS policy is enabled, this command can be issued only from the Primary FCS switch. The execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 602
2 secPolicyDelete See Also secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDump, secPolicyRemove, secPolicySave, secPolicyShow 576 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 603
Availability" for details. This command can be issued from all FCS switches in the fabric. Operands This command has the following operands: " 30:15:5c 1 primaryfcs 2 No 10:00:00:60:69:30:1e:62 4 switch ACTIVE POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:60:69 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 604
2 secPolicyDump See Also secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete, secPolicyRemove, secPolicySave, secPolicyShow 578 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 605
the primary FCS after activation. FCS policy most be enabled to execute this command, and the command must be issued from the primary FCS switch. Execution of this command is subject to Admin Domain restrictions that may be in place. Refer to chapter 1, "Understanding Admin Domain Restrictions" and - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 606
:admin> secpolicyactivate About to overwrite the current Active Policy Set. ARE YOU SURE (yes, y, no, n): [no] y secpolicyactivate command was completed successfully. switch:admin> secpolicyshow ACTIVE POLICY SET FCS_POLICY Pos Primary WWN DId swName 1 Yes 10:00:00:05:1e:35:cd:ef 200 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 607
members must be separated by semicolons. This operand is required. Depending on the policy type, members can be specified using IP address, WWN, domain, or switch name. WWN Member Policy Types The following policy types require members be specified by WWN address: • FCS_POLICY • SCC_POLICY These - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 608
ports 3 and 9 and all devices attached to those ports. [1-3, 5] Selects ports 1 through 3 and 5 and all devices attached to those ports. [*] Selects all ports on the switch and devices currently attached to those ports. Examples To remove a member that has a WWN of 12:24:45:10:0a:67:00:40 from SCC - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 609
memory. Secpolicysave saves the modified SCC, DCC, and FCS policies to the Defined Security Policy Set on the local switch. Notes This command is always a local switch operation. A fabric-wide consistency configuration does not affect the behavior of this command. The execution of this command is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 610
to display the members of an existing policy in the Active or Defined security policy set. The command can be issued from all FCS switches. This command displays the policy database one page at a time. Use secPolicyDump to display the policy database without page breaks. Note The execution of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 611
WWN DId swName 1 Yes 10:00:00:60:69:30:15:5c 1 primaryfcs 2 No 10:00:00:60:69:30:1e:62 4 switch fddCfg, secPolicyAbort, secPolicyActivate, secPolicyAdd, secPolicyCreate, secPolicyDelete, secPolicyDump, secPolicyRemove, secPolicySave Fabric OS Command Reference 585 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 612
" and Appendix A, "Command Availability" for details. Operands When invoked without operands, this command displays the security statistics on the local switch or chassis. The following operands are optional: name Specify the name of a security statistic you would like to reset. The specified - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 613
are grouped together. domain(s) Specify a list of domain IDs on which to reset the security statistics. Specify an asterisk (*) to represent all switches in the fabric or specify a list of domains, separated by semicolons and enclosed in quotation marks. This option can only be executed when FCS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 614
security statistics. Synopsis secstatsshow [name[, "domain[;domain]"]] Description Use this command to display one or all security statistics. This command can be issued on any switch to display local security statistics. If FCS policy is enabled and secStatsShow is issued on the primary FCS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 615
are grouped together. Specify one or more domains for which to display the security statistics. Specify an asterisk (*) in quotation marks to represent all switches in the fabric or specify a list of domains separated by semicolons. This option can only be executed when FCS policy is enabled and the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 616
readings. Synopsis sensorshow Description Use this command to display the current temperature, fan, and power supply status and readings from sensors located on the switch. The actual location of the sensors varies, depending on the switch type. Operands none Examples To view all sensor values - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 617
of debug messages to the serial console. By default, no debug messages are displayed. High debug level the system response time. The set of supported modules and their current debug levels are a module named NS to value 3: switch:admin> setdbg NS 3 switch:admin> dbgshow NS Module NS, debug - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 618
dial-in to a CP on those systems that support modem dial-in. When modem dial-in is enabled a 11 d 10 c 9 b 8 a 7 d 6 c 5 b 4 a 3 d 2 c 1 b 0 a ! ! POWER SUPPLY 3 ! ! POWER SUPPLY 2 ! ! scale: 1/8" = 1" POWER SUPPLY 1 & 3 POWER SUPPLY 2 & 4 200-240 VAC 12A 50-60 Hz 200-240 VAC 12A 50-60 Hz - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 619
" for details. This command is not supported on the Brocade DCX backbone. Operands The optional operands are as follows: -e Enables modem dial-in. -d Disables modem dial-in. Examples To disable modem dial-in to a CP: switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 620
levels filter the display of the debug message to the serial console. By default, no debug messages are displayed. Note The execution of this command is set the verbose level of a module named NS to value 3: switch:admin> setverbose NS 3 switch:admin> dbgshow NS Module NS, debug level = 0, verbose - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 621
power (longwave only), and laser diode drive current. Notes The sfpShow command does not reflect changes in the sfpShow output if any SFPs are replaced or removed while a port or a switch display the SFP information, relative to its slot for bladed systems. Use switchShow for a list of valid ports - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 622
: -Area 16: id (sw) Vendor: AGILENT (output truncated) Serial No: 0105091301045274 To display detailed SFP information for a Finisar "smart" SFP: switch:user> sfpshow RX Power: 199.6 uWatts TX Power: 235.2 uWatts To display detailed information for GbE port 0 on a Brocade 7500: switch:admin> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 623
To display detailed information for GbE port 0 on an FR4-18i router blade: CS48000:admin> sfpshow 10/ge0 Identifier: 3 SFP Connector: 7 0 Serial No: A00143427 Date Code: 020511 To display all SFP information: switch:user> sfpshow -all Port 0: Identifier: 3 SFP Connector: 7 LC - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 624
2 sfpShow See Also Length 9u: 0 (units km) Length 9u: 0 (units 100 meters) Length 50u: 30 (units 10 meters) Length 62.5u:15 (units 10 meters) Length Cu: 0 (units 1 meter) Vendor Name: IBM Vendor OUI: 08:00:5a Vendor PN: IBM42P21SNY Vendor Rev: AA10 Wavelength: 0 (units nm) Options: 001a - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 625
console serial port. Flow control is disabled by default. Because this command changes the flow control on the configuration database; therefore, it is persistent across reboots and power cycles. Notes On dual-CP systems, a reboot on the disable flow control: switch:admin> shellflowcontroldisable - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 626
shell task. Flow control is disabled by default. Because this command changes the flow control database; therefore, it is persistent across reboots and power cycles. Notes On dual-CP systems, a reboot on for an extended period of time, the switch might reboot. It is recommended to disable - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 627
the following operand: slotnumber Specify the slot number of the blade to be powered down. This operand is required. Examples To power off blade unit 3: switch:admin> slotpoweroff 3 Slot 3 is being powered off See Also powerOffListSet, powerOffListShow, slotPowerOn, slotShow Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 628
This command has the following operand: slotnumber Specify the slot number of the blade to be powered on. This operand is required. Examples To power on blade unit 3: switch:admin> slotpoweron 3 Powering on slot 3. See Also slotPowerOff, slotShow 602 Fabric OS Command Reference 53-1000599 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 629
36 FC4-48 port blade 39 FC10-6 port blade 50 CP8 control processor blade 52 Core8 switch blade 37 FC8-16 port blade 55 FC8-32 port blade 51 FC8-48 port blade Status Displays the status of the blade as one of the following: VACANT The slot is empty. INSERTED, NOT POWERED ON The - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 630
SAS Virtualizaion services are disabled. Only applies to the FA4-18 blade. DISABLED The blade is powered on but disabled. FAULTY The blade is faulty because an error was detected. UNKNOWN The blade is inserted but its state cannot be determined. Operands This command supports the following - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 631
BTU) Power Efficiency: 9.91 watts per port, 2.48 watts per Gb To display Brocade model names for each blade in the chassis: switch:user> slotshow -m Slot Blade Type ID Model Name Status 1 AP BLADE 33 FA4-18 ENABLED 2 SW BLADE 55 FC8-32 ENABLED 3 SW BLADE 37 FC8-16 ENABLED - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 632
command supports set, reset to default, and display operations. All values successfully changed by this command take effect immediately and are persistent across power cycles name, authentication protocol and password, SNMPv3 trap recipients IP address, associated user index, and trap severity level - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 633
role. A total of three entries for snmpadmin and snmpuser respectively are supported. Separate default passwords are provided for creation of authKey and privKey for each entry. The default set of passwords is published and the default algorithm (MD5/SHA) is used to create the initial set of auth - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 634
default option sets the user name and password to default. If FCS policy is enabled, the configuration has to be updated on both primary and nonprimary switches Host-subnet-area is defined by comparing nonzero IP octets. For example, an ACL of 192.168.64.0 enables access by any hosts that start with - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 635
sysDescr The system description. The default value is Fibre Channel Switch. sysLocation The location of the system (switch). The default value is End User Premise. sysContact The contact information for this system (switch). The default value is Field Support. Refer to the definition of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 636
SNMPv1 configuration of a switch: switch:admin> snmpConfig --set snmpv1 16 - please re-enter Community (rw): [OrigEquipMfr] Trap Recipient's IP address: [1080::8:800:200C:1230] 10.32.147.113 Community (rw): [private] Trap Recipient's IP address: [0.0.0.0] Community (ro): [public] Trap Recipient's IP - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 637
systemGroup configuration to default values: switch:admin> snmpconfig --default systemGroup ***** This command will reset the agent's system group configuration back to factory default ***** sysDescr = Fibre Channel Switch sysLocation = End User Premise sysContact = Field Support authTraps = 0 (OFF - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 638
OS MIB Reference SW_v5_x.mib, "Switch Management Information & Switch Enterprise Specific Trap" RFC1157, "A Simple Network Management Protocol (SNMPv1)" RFC1213, "Management information Base for Network Management of TCP/IP-based internets: MIB-II" RFC2574, "User-based Security Model (USM) for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 639
are present between two switches that support trunking, then it is likely that trunk groups are present and all ports between the two switches should be tested Specify a list of user ports to test. By default, all of the ISL ports in the current switch are tested. Refer to itemList help pages for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 640
2 spinFab -setfail mode Instruct spinFab how to mark failed ports. Specify 1 to mark failing command may be useful with large -nmegs counts. This mode is disabled by default. Examples To test cascading ISL links: switch:admin> spinfab -ports 1/0 - 1/2 spinfab running... spinfab: Completed 11 megs - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 641
Refer to the Fabric OS Message Reference for more information. See Also itemList, portLoopbackTest spinFab 2 Fabric OS Command Reference 615 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 642
than password authentication and can be used to securely access services that require automatic login. SSH public key authentication works as /configUpload. This command supports generation of a public/private key pair on the switch to enable outgoing connections between a switch and a remote host - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 643
the switch from the remote host, on which the private key resides. importpubkey prompts for the following input parameters: IP Address Enter the IP address for the remote host. IPv4 and IPv6 addresses are supported. remote directory Enter the path to store the public key. The default directory - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 644
switch to a specified remote host to support outgoing connections from the switch switch for incoming connections: 1. Generate a private/public key pair on a remote host (accept default to the local switch: switch:username> sshutil importpubkey Enter IP address:Remote host IP Address Enter remote - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 645
a switch: switch:username> sshutil delpubkeys WARNING: It deletes all the ssh public keys for user. Do you want \ to proceed(Yes or No, default is the public key to a remote host: switch:username> sshutil exportpubkey Enter IP address: remote host IP Address Enter remote directory: ~username/.ssh - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 646
to clear the port and diagnostics statistics for the specified list of blade or user ports. You can issue this command on the FR4-18i blade in a Brocade chassis; however, the command is not supported by the Brocade platform and does not effect any other feature operations. This availability is - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 647
A, "Command Availability" for details. Operands This command has the following operand: -ports itemlist Specify a list of user ports to test. By default, all the user ports in the switch are tested. Refer to itemList help pages for further details. Examples To stop the portTest command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 648
when a message with FFDC attributes is logged. FFDC is enabled by default. Note The execution of this command is subject to Admin Domain restrictions FFDC configuration: switch:admin> supportffdc --show First Failure Data Capture (FFDC) is disabled. To enable the FFDC events: switch:admin> - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 649
auto file transfer. If no parameter is not specified, the supportFtp command defaults to supportFtp -S. Examples To set the FTP parameters: switch:admin> supportftp -s -h 1080::8:800:200C:417A -u njoe -p password -d support supportftp: ftp parameters changed. To display the FTP parameters - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 650
FTP Auto check: Off To set FTP parameters interactively: switch:admin> supportftp -s Host IP Addr[1080::8:800:200C:417A]:192.168.67.126 User Name[njoe]:admin Password[********]:password Remote Dir[support]:temp Auto file transfer parameters changed To display a time interval to check the FTP - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 651
data are removed after the command has finished. If there are BP blades installed on the switch, a support file (a.tar.gz file) is generated from each slot. This command accepts IPv4 and IPv6 addresses. If the configured IP address is in IPv6 format, the RAS auto file transfer and event notification - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 652
command. Failure to pretest and properly configure the service could result in significant delays in obtaining transferred output , y, no, n): [no] y Host IP or Host Name: 192.168.126.115 Saving support information for switch:Stealth200E, module:CONSOLE0... ...ave_files/Stealth200E-S0-200802171129 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 653
. OK to proceed? (yes, y, no, n): [no]y Host IP or Host Name: 192.168.126.115 User Name: admin Password: Protocol (ftp or scp): ftp Remote Directory: /users/home/admin/support Saving support information for switch:art_saturn1, module:CONSOLE0... ...ave_files/art_saturn1-S6-200802171208-CONSOLE0.gz - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 654
:art_saturn1, module:CONSOLE1... ...ave_files/art_saturn1-S6-200802171211-CONSOLE1.gz: 7.45 kB 217.17 kB/s Saving support information for switch:art_saturn1, module:SSAVELOG... ...ave_files/art_saturn1-S6-200802171212-sslog.ss.gz: 1.88 kB 53.35 kB/s SupportSave completed See Also supportShow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 655
default. port Port group commands, enabled by default. fabric Fabric group commands, enabled by default. services Service group commands, enabled by default. security Security group commands, enabled by default by Brocade support personnel. Output generated by this command may vary by switch - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 656
switch display in the per-port outputs. The slotnumber must be provided when specifying a range of ports on multi-bladed enabled fabric enabled services enabled security enabled network 18:43:12 2008 18:43:12.562 PORT debug 16 c48d6c7c,c48d6c78,c48d6c7c,abaa0f0f 18:43:21.821 FSSK event - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 657
group commands. fabric Disables the fabric group commands. services Disables the service group commands. security Disables the security group commands. the OS group of commands under the supportShow command: switch:admin> supportshowcfgdisable os Config update Succeeded See Also supportShow, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 658
group commands. fabric Enables the fabric group commands. services Enables the service group commands. security Enables the security group commands. enable a group of commands under the supportShow command: switch:admin> supportshowcfgenable os Config update Succeeded See Also supportShow, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 659
To display which groups of commands are enabled in the supportShow command: switch:admin> supportshowcfgshow os enabled exception enabled port enabled fabric enabled services enabled security enabled network enabled portlog enabled system enabled extend disabled filter disabled - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 660
[mode] Description Use this command to enable or disable switch beaconing mode. Switch beaconing can be used to locate a failing unit. When and only the beaconing pattern is shown. However, if diagnostic frame-based tests (such as portLoopbackTest) are executed, two patterns are interleaved. - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 661
panel LEDs change to slow flashing yellow as each port is disabled. A persistently disabled switch can be temporarily enabled using the switchEnable command. A temporarily enabled switch remains disabled after a reboot. Notes Performance Monitoring cannot be added to any port on a persistently - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 662
switchcfgpersistentenable Description Use this command to persistently enable the switch. All Fibre Channel ports that passed the power-on self-test (POST) are enabled and come online if connected to a device, or remain offline if disconnected. The switch might need to be enabled if it was - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 663
Use this command to configure the speed of all the ports on a switch to a particular level. The configuration is saved in flash memory and persists across switch reboots or power cycles. If any port on the switch is not capable of the specified speed setting, an error message displays for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 664
command to enable or disable trunking on all the ports of a switch. Use portCfgTrunkPort to enable or disable trunking on a single port. When all ports. Examples To disable trunking on all ports of a switch: switch:admin> switchcfgtrunk 0 Committing configuration...done. See Also portCfgShow, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 665
or before running many of the diagnostic tests. All commands that require the switch to be disabled send an error if invoked while the switch is enabled. Notes The switch does not need to be disabled before rebooting or powering off. As each port is disabled, the front panel LED changes to a slow - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 666
is connected to a fabric, it rejoins the fabric. If this switch remains the principal switch, then it assigns itself a domain ID. If another switch assumes the principal role, then this switch becomes a subordinate switch and accepts a domain ID from the principal. As each port is enabled, the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 667
various Fabric OS commands, such as fabricShow. Use this command with the name operand to assign a new switch name. Enter this command with no operand to display the current switch name. Changing the switch name causes a domain address format RSCN to be issued (refer to the FC-FLA specification for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 668
port number relative to the switch. Index column is only displayed on enterprise-class platforms. Slot Slot number; 1-4 and 7-10. Port Port number; 0-15, 0-31 or 0-47. Address The 24-bit Address Identifier. Address column is only displayed for slot-based platforms. Media Media types include - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 669
marked faulty. Port failed diagnostics. Locking to the reference signal. Running diagnostics. Connection not established (for virtual ports only). Port is up and running. Protocol support by GbE port. Ports support ISCSI. Fabric OS Command Reference 643 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 670
Brocade 48000 and a Brocade. If the ISL is between a Brocade 48000 and a Brocade 4100 or 200E, the disabled E_Port displays as No_Sync. On a Brocade 7600 switch Also, switchShow displays the WWN of the border switch attached to this N_Port as a 24-bit Port Identifier assigned to this port by the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 671
Displays the number of ports on the iSCSI sessions associated with GbE ports in a switch. Examples To display the port count: switch:admin> switchshow -portcount ports= 64 To display GbE ports with iSCSI sessions: switch:admin> switchshow -iscsi Ports of Slot 1 ge0 ge1 ge2 ge3 ge4 ge5 ge6 ge7 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 672
15 035f00 id N2 Online 10:00:00:00:00:02:00:00 208 8 16 03d000 -- -- Offline [output truncated] 216 8 24 03d800 -- -- Online 10:00 To display a switch in Access Gateway mode: switch:admin> switchName: switchType: switchState: switchMode: switchWwn: switchBeacon: switchshow switch 34.0 Online - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 673
1 WWN 0 1 CP 0 1 Blade 0 1 Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 Any single contributor can force the overall status of the switch to MARGINAL or DOWN. For example, assuming that the switch contributor values are set to the default values, if there is one - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 674
the prompt is (0..0), ** the policy parameter is NOT applicable to the switch. ** Simply hit the Return key. The minimum number of Bad PowerSupplies to MARGINAL status: (0..2) [1] Down Blade contributing to DOWN status: (0..8) [0] Down Blade contributing to MARGINAL status: (0..8) [1] - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 675
"Command Availability" for details. Operands none Examples switch:admin> switchstatuspolicyshow The current overall switch status policy parameters: Down Marginal PowerSupplies 2 1 Temperatures 2 1 Fans 2 1 WWN 0 1 CP 0 1 Blade 0 1 Fabric OS Command Reference 649 53-1000599 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 676
2 switchStatusPolicyShow Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 See Also switchStatusPolicySet, switchStatusShow 650 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 677
that is configured with an IPv6 address: switch:user> switchstatusshow Switch Health Report Report time: 09/11/2006 05:39:28 PM Switch Name: switch IP address: 1080::8:800:200C:417A SwitchState: MARGINAL Duration: 80:12 Power supplies monitor Temperatures monitor Fans monitor Flash monitor - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 678
that is configured with an IPv4 address: switch:user> switchstatusshow Switch Health Report Switch Name: switch IP address: 10.32.89.26 SwitchState: MARGINAL Duration: 80:12 Report time: 09/11/2006 05:39:28 PM Power supplies monitor Temperatures monitor Fans monitor Flash monitor Marginal - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 679
switchuptime Description Use this command to display the current time and the amount of time that the switch has been operational. Operands none Examples To view the uptime for the switch: switch:user> switchuptime 9:50pm up for 20 mins See Also none Fabric OS Command Reference 653 53 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 680
type as DCC. Notes This command can be executed on both active and standby CPs. This command does not support High Availability (HA). Examples To display DCC violations for a switch: switch:admin> switchviolation --dump -dcc Device WWN Port 22:00:00:04:cf:75:59:87 10 See Also none - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 681
forwarding messages to the servers added through the command syslogdIpAdd. The default facility is LOG_LOCAL7. Note The execution of this command is subject displayed. Examples To set the syslog facility to LOG_LOCAL1: switch:admin> syslogdfacility -l 1 Syslog facility changed to LOG_LOCAL1 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 682
servers are supported. You can specify a syslogd server in one of two ways: • By IP address: The syslogdipadd command accepts IPv4 and IPv6 addresses. • By host name: The host must have a DNS entry and accept DNS requests. The DNS name service must be configured on the switch with dnsconfig before - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 683
2. Add the DNS name server to the switch: switch:admin> dnsconfig Enter option 1 Display Domain Name Service (DNS) configuration 2 Set DNS configuration 3 Remove DNS configuration 4 Quit Select an item: (1..4) [4] 2 Enter Domain Name: [] brocade.com Enter Name Server IP address in dot/colon notation - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 684
. Synopsis syslogdipremove ip_address Description Use this command to remove the IP address of the server that is running the syslogd process and to which system messages are sent. IPv6 and IPv4 syslogd address configurations are supported. Note The execution of this command is subject to Admin - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 685
Description Use this command to display all syslog daemon IP addresses in the configuration database. IPv4 and IPv6 addresses are supported. Operands none Examples To display all syslog daemon IP addresses configured on a switch: switch:admin> syslogdipshow syslog.1 1080::8:800:200C:417A See - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 686
(CP), the command shuts down the active CP, standby CP, and any AP blades. After executing this command, manually power off the system. To reboot the system, manually turn the power switch on. Notes This command is not supported on the standby CP. The execution of this command is subject to Admin - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 687
to power-cycle the switch in order to restore operation. Are you sure you want to shutdown the switch [y/n]? y This is the active Cp 2005/11/16-05:47:20, [FSSM-1003], 5641,, WARNING, Brocade12000, HA State out of sync HA is disabled Stopping blade 2 Shutting down the blade.... Stopping blade - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 688
blade are saved in /var/log/verify.slot files. On fixed-port-count products, the slot defaults Channel through the loopback plug. Notes The switch must be offline for this command to run BLADE, PS, FAN, and WWN; however, only BLADE is supported at this time. Since only one FRU type is supported - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 689
in the fabric: switch:admin> systemverification -short systemverification: Setting parameters for short run. systemverification: burnin parameters. CURRENT - KEYWORD : DEFAULT 1 - number_of_runs : 1 2 - vib : 2 10 - thermal : 10 SYSTEMVERIFICATION - label : BURNIN 2 - min_lb_mode - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 690
(if applicable), the sensor state, and the temperature. The temperature readings are given in both Centigrade and Fahrenheit. Note Refer to the hardware reference manual for your switch to determine the normal temperature range. Operands none Examples To display temperature and status sensors - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 691
login timeouts. This operand is optional; if omitted, the command displays the current timeout value. Examples To set the idle timeout to 10 minutes: switch:admin> timeout 10 IDLE Timeout Changed to 10 minutes The modified IDLE Timeout will be in effect after NEXT login See Also none Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 692
of the translate domain associated with that edge fabric. In this case the translate domain is considered local to both of the switches in the backbone. 5. If there is only one switch in the backbone, no domain details are displayed (all domains are local). Depending on the fabric, the display may - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 693
port. A bandwidth that is less than 0.512 Gbps is adjusted to the nearest power of 2 value. A bandwidth in the range of 0.512 Gbps Included) to displays details for all domains, including local domains and local translate domains: switch:user> topologyshow 6 domains in the fabric; Local Domain ID: 7 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 694
Ports: Total Bandwidth: Bandwidth Demand: Flags: 1 11 0 1 2 3 4 5 6 7 8 9 15 8.000 Gbps 1275 % D The command is executed from the backbone in a fabric with five switches. The fabric has five domains, but details are only shown for the three remote domains, not for the two local translate domains - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 695
See Also In Ports: Total Bandwidth: Bandwidth Demand: Flags: 23 24 33 38 39 8.000 Gbps 350 % D fcrXlateConfig, portRouteShow, uRouteShow topologyShow 2 Fabric OS Command Reference 669 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 696
display the dump status on the switch. If there is no parameter specified, this command defaults to traceDump -S. The default remote file name format is chassisname-S#- time. If a non-bladed system has an embedded BP, two trace dumps will be generated, a*.dmp file for the main switch and a *.tar.gz - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 697
command to display information about the track-changes commands. Examples To display information on the track-changes commands: switch:admin> trackchangeshelp trackChangesSet Configure alert for login/logout/config update trackChangesShow Displays status of track changes See Also trackChangesSet - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 698
output from the track-changes feature is dumped to the error log for the switch. Use errDump or errShow to view the error log. Note The execution of to enable the track-changes feature or 0 to disable the feature. The default (if no operand is specified) is to disable the track-changes feature. - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 699
from the track-changes feature is dumped to the error log for the switch. Use the errDump command or errShow command to view the error log. Operands Examples To display the status of the track-changes feature: switch:admin> trackchangesshow Track changes status: ON Track changes generate SNMP - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 700
a trunk link failure. This command reports one of the following messages, based on the trunking properties of the two specified ports: • Switch does not support trunking • Trunking license required • Trunking not supported in switch interop mode • port port_id is not E_Port • port port_id trunking - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 701
switches. See EXAMPLES, below. deskew The time difference for traffic to travel over each ISL compared to the time to the shortest ISL in the group. The number corresponds to nanoseconds divided by 10. The firmware 00:60:69:51:43:04 deskew 16 deskew 15 deskew 17 deskew 16 MASTER 3:24 -> 14 10:00 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 702
-> 23 10:00:00:05:1e:37:12:13 64-> 16 10:00:00:05:1e:37:12:13 65-> 19 10:00:00:05:1e:37:12:13 4 deskew 17 MASTER 4 deskew 16 4 deskew 16 4 deskew 16 4 deskew 17 4 deskew 17 4 deskew 15 4 deskew 16 switch:admin> switchshow 48 4 0 013000 id N4 Online EX-Port (Trunk port - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 703
may be specified as operand to set the clock server back to default. Each ipaddr specified should be the IP address of an NTP server and should be accessible from the switch. The NTP server must support a full NTP client. When a clock server IP address other than LOCL is specified but is not used by - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 704
2 tsClockServer To set the NTP server to a specified IP address: switch:admin> tsclockserver 123.123.123.123 Updating Clock Server configuration...done. switch:admin> tsclockserver 123.123.123.123 To configure multiple NTP servers: switch:admin> tsclockserver "12.134.125.24; 12.234.87.01" Updating - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 705
in the same time zone, you may leave the default time zone setup. Time zone is used in computing local time for error reporting and logging. An incorrect time zone setup does not affect the switch operation in any way. System services started during the switch boot reflect a time zone change only at - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 706
to the zone to Pacific Time using the interactive command mode: switch:admin> tsTimeZone --interactive Please identify a location so that time zone Costa Rica 31) Montserrat 48) Virgin Islands (UK) 15) Cuba 32) Netherlands Antilles 49) Virgin Islands (US) 16) Dominica 33) Nicaragua 17 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 707
Oliver County 14) Mountain Time 15) Mountain Time - south Idaho & east Oregon 16) Mountain Time - Navajo 17) Mountain Standard Time - Arizona 18) Pacific Time to the offset format and verify the configuration: switch admin> tstimezone --old 2 switch admin> tsttimezone Time Zone Hour Offset: 2 Time - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 708
value is 1. -ports itemlist Specifies a list of blade ports to test. By default, all the blade ports in the specified slot are tested. Refer to the itemList command help page for more information. Examples To execute this test: switch:admin> turboramtest -passcnt 2 -ports 2/0-2/63 Running Turbo - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 709
is displayed in minutes. The output format adjusts accordingly. Operands none Examples To display the length of time the system has been operational: switch:admin> uptime 12:03am up 4:56, 3 users, load average: 1.17, 1.08, 1.08 See Also date, fastboot, reboot Fabric OS Command Reference 683 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 710
. When using static routes, load sharing may be affected. The switch attempts to optimize load sharing, but if too many routes are supported on the Brocade 300, 4900, 5100, 5300, 7500, 7600, and DCX platforms. On the Brocade 48000, Static route configuration is not supported on Brocade directors - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 711
the destination domain of the static route to remove. Examples To remove a static route for all traffic coming in from port 1 and addressed to domain 2: switch:admin> urouteremove 1 2 done. See Also configShow, dlsShow, uRouteConfig, uRouteShow Fabric OS Command Reference 685 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 712
2) on a switch, the value is equal to the Area field displayed by the switchShow command. Refer to Fabric OS Administrator's Guide for more information input port whose routes are to be displayed, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 713
Flags Next (Dom, Port) 0 1 11 1000 1 D 1,0 11 2 0 1500 2 D 4,0 4 0 500 1 D 4,0 16 1 27 1000 1 D 1,1 27 2 16 1500 2 D 4,16 To display the routing information of port 11 to domain 4 only: switch:admin> urouteshow 1/11, 4 Local Domain ID: 3 In Port Domain Out - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 714
. Refer to the Fabric OS Administrator's Guide for details. Operands All operands are exclusive space. Valid applications are: firmware, support, config, firmwarekey. A of the attached USB device: switch:admin> usbstorage -l firmwarekey\ 0B support\ 106MB support1034\ 105MB config\ - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 715
15 15:13 Available space on usbstorage 74% To remove an application area: switch:admin> usbstorage -r firmware FW_v6.0.0 To disable an attached USB device: switch:admin> usbstorage -d USB storage disabled supportSave, firmwareDownload, configUpload, configDownload, firmwareKeyupdate Fabric OS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 716
database can be distributed manually to other switches in the fabric by using the distribute command. Target switches must be configured switch-local user database only, regardless of whether the switch is configured to use RADIUS authentication or not. The account database supports a maximum of 256 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 717
supported on switches running Fabric OS v6.0 or later. As a consequence, account recovery from backup as well as backup display option (former --show -b option) are no longer supported change the role, AD permissions, or home AD of any default account. • You cannot change the role, AD permissions, or - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 718
is specified with the --add option, AD0 is assigned by default. Use comma-separated lists, ranges, or both, for example Deletes the specified account from the switch. This command prompts for confirmation before following operands are supported: username Specifies the account login name. 692 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 719
Password Expiration Date: Not Applicable Locked: No AD membership: 0 Home AD: 0 To change account attributes: switch:admin> userconfig --change joe -e no Broadcast message from root Sat Apr 2 03:03:32 2005... Security Policy, Password or Account Attribute Change: joe will be logged out Attribute for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 720
See Also To add AD 0 & 255 to bob's AD member list. Home AD is unchanged: switch:admin> userConfig --addad bob -a 0,AD255 To delete AD 128 from bob's AD member list. New home AD is set to 0: switch:admin> userConfig --deletead bob -a 128 -h 0 none 694 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 721
default login name, new_username cannot be another default login name. 5. If new_username is a default login name, it must indicate the same role as old_username. Notes This command is not supported from "USERID" to "admin": switch:admin> userrename USERID admin See Also none Fabric OS Command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 722
on The build date of firmware running in switch. Flash The build date of firmware stored in flash proms. BootProm The version of the firmware stored in the boot PROM Usually the Made on and Flash dates are the same, because the switch starts running flash firmware at power-on. However, in the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 723
are not allowed. Changes made by this command require a switch reboot to take effect. You may defer rebooting the system. However, the switch must restart before any firmwareDownload or (for bladed systems) CP failover occurs; otherwise, the switch may behave in unexpected ways. Note This command - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 724
2 wwn See Also To display the switch WWN and serial number: switch:admin:admin> wwn -sn WWN: 10:00:00:05:1e:01:23:e0 SN: RC030000089 switchShow 698 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 725
device to a specified EX_Port. - TI within backbone fabric locks down the route within the backbone fabric based on EX_Ports and devices involved. TI zones over FCR is supported only on switches running Fabric OS v6.1.0 or later. Participating devices need to be LSAN Zoned to enforce TI. Fabric - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 726
and no other redirect zones exist. Use zoneDelete to remove the base RD zone, "red_______base". Use cfgDelete to remove the RD zone configuration "r_e_d_i_r_c__fg." TI zones are not supported in fabrics involving switches running firmware versions preceding Fabric OS v6.0. However, the existence of - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 727
-f option. zone_object Specifies a zone object. A zone object can be a zone member, zone alias or a zone. mode Specifies the zone database location. Supported mode flag values are: 0 Uses the zone database from the current transaction buffer. 1 Uses the zone database stored in the persistent - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 728
specified the zone is created, by default, with failover enabled, and the zone will be activated. This operand is supported only with the --create and -- offline and there is an alternative ISL, the alternative ISL is used and the switch does NOT generate any SCN/RSCN. If the ISL of that TI Zone - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 729
to support FCR. --rddelete Deletes the RD Zone specified by name. RD Zones are unique in that the zone name is not user-defined. It is derived based on zone database (AD0) to the current Admin Domain: switch:admin> zone --copy AD0.cur_cfg1 To copy backup_zn zone from the root zone database (AD0 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 730
-f You are about to prune the zone configurations, based on zone --validate output. Do you want to prune the zone configurations (yes, y, no, n): [no] y 2. Traffic isolation zone commands: To create a traffic isolation zone with failover enabled (default). switch:admin>zone --create -t ti red_zone - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 731
target1 and target4 through port number 2 on an Edge fabric switch with a domain ID of 3. In this example, "3,1"is the host, "5, 250"and "5.251"are the proxy targets, and the remaining members are E_Ports: switch:admin> zone --create -t ti fcr_edge_ti_zone -p "3,1; 5,250; 5,251; 3,2; - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 732
red_0917_10_10_10_10_10_10_10_10_20_20_20_20_20_20_20_20", with a restrictedly policy and no FCR support. 5. The base zone object, "red_______base". 6. The RD 3f:3f:3f:30:32:00:00:00 To delete an RD Zone named "red_0917_10_10_10_10_10_10_10_10_20_20_20_20_20_20_20_20": switch:admin>zone --rddelete - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 733
added. The list must be enclosed in quotation marks. Members must be separated by semicolons. Valid values can be one or more of the following: A switch domain and port area or index number pair; for example, "2, 20". View the area or index numbers for ports using the switchShow command. • Node or - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 734
"Zone_1" and "zone_1" indicate different zones. Zone names are limited to 64 characters. Spaces are ignored. "member" Specify a member or a list of or index number, for example, "2, 20" specifies port index number 20 on switch domain 2. When a zone member is specified by port index number, then all - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 735
zoneCreate 2 Examples See Also To create three zones using a combination of port numbers and zone aliases: sw5:admin> zonecreate "Purple_zone", "1,0; loop1" sw5:admin> zonecreate "Blue_zone", "1,1; array1; 1,2; array2" sw5:admin> zonecreate "Green_zone", "1,0; loop1; 1,2; array2" zoneAdd, - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 736
, enable the configuration with the cfgEnable command. Notes When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "zonename" Specify the name of the zone to be deleted. Quotation marks are optional. Examples To - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 737
Examples To display zone command help information: switch:admin> zonehelp aliadd alicreate alidelete aliremove alishow cfgactvshow transaction Print zone configurations in transaction buffer Activates or deactivates a default zone configuration. Display the information of all the online devices - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 738
all zone object types, including cfg, zone, and alias. This command changes the defined configuration. For the change to be preserved across switch reboots, save the configuration to nonvolatile memory with the cfgSave command. For the change to become effective, enable the configuration with the - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 739
:20:37:0c:76:28 alias: loop1 21:00:00:20:37:0c:76:85; 21:00:00:20:37:0c:71:df switch:admin> zoneobjectexpunge "White_zone" switch:admin> cfgshow Defined configuration: cfg: USA_cfg Red_zone; Blue_zone zone: Blue_zone 1,1; array1; 1,2; array2 zone: Red_zone 1,0; loop1 alias: array1 21:00:00:20:37:0c - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 740
configuration must be enabled with the cfgEnable command. Note When FCS policy is enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "objectName" The name of the object you want to rename. "newName" The new name of the object - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 741
enabled, this command can be issued only from the primary FCS switch. Operands The following operands are required: "zonename" Specify the by semicolons. A member can be one or more of the following: • A switch domain and port area or index number pair: for example, "2,20". Use switchShow for - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 742
), or specify 1 to display the contents of the nonvolatile memory. The default value is 0. This operand is optional. Examples To display all zones beginning with the letters "A" through "C": switch:admin> zoneshow "[A-C]*" zone: Blue_zone 1,1; array1; 1,2; array2 See Also zoneAdd, zoneCreate - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 743
msPlMgmtDeactivate Must be run from the primary FCS switch. Must be run from the primary FCS switch. Must be run from the primary FCS switch. Must be run from the primary FCS switch. Can be run on all FCS switches. Must be run from the primary FCS switch. Must be run from the primary FCS - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 744
from the primary FCS switch. Must be run from the primary FCS switch. Can be run on all FCS switches. Can be run on all FCS switches. Can be run on all switches to view the NTP server's IP address. You can only modify the NTP server's IP address on the primary FCS switch. Must be run from - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 745
lists the commands available when logged in to the standby CP on a Brocade 48000 or DCX Backbone. The full set of commands for your user role is available on the active CP. Commands supported on the standby CP The following commands are supported when logged into the standby CP. TABLE 23 Commands - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 746
or disables modem dial-in to a control processor (CP). Not supported on the Brocade DCX. supportSave Saves support information for RASLOG, TRACE, and supportShow. switchName Displays this switch's name. switchViolation Displays policy violations recorded in RAS log. tsTimeZone Displays - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 747
(CP). 2. Role Based Access Control (RBAC) . The following RBAC permissions are supported: • O = observe • OM restrictions, refer to the Fabric OS Administrator's Guide. Admin Domain Types are one or more operations allowed only if the port or the local switch is part of the current AD. View access - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 748
Domain availability of all Fabric OS commands. TABLE 1 RBAC availability and admin domain type Command Name User Admin Operator Switch Admin aaaConfig ad ag agShow aliAdd aliCreate aliDelete aliRemove aliShow aptPolicy auditCfg authUtil bannerSet bannerShow bcastInfoShow bcastShow bladeBeacon - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 749
OM OM OM OM OM O O O O O O O O OM OM OM OM OM OM OM O OM OM OM OM Basic Switch Admin O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O Security Admin Domain Admin O Allowed O Allowed O Allowed O Allowed O Allowed O Allowed O Allowed O Allowed O Allowed O Allowed - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 750
A Command RBAC permissions and AD types TABLE 1 RBAC availability and admin domain type Command Name User Admin Operator Switch Admin diagShow diagSkipTest diagStopBurnin distribute dlsReset dlsSet dlsShow dnsConfig enclosureShow errClear errDelimiterSet O OM OM OM O OM OM OM O OM - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 751
OM OM OM OM OM OM O OM N OM OM OM O OM OM OM Basic Switch Admin O O O O O O O O O O O O O O O O O O N O O O O O O O N O O O O O O O Security Admin Domain Admin N SwitchMember N SwitchMember N Allowed N Allowed O SwitchMember N SwitchMember N SwitchMember N Allowed N SwitchMember - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 752
OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM Basic Switch Admin O N O O O O O O O O O O O O O O O OM O O O O O O O OM O O O O OM OM O O Security Admin Domain Admin OM Allowed/SwitchMm br/Disallowed N SwitchMember N Allowed N SwitchMember N SwitchMember N SwitchMember - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 753
Command RBAC permissions and AD types A TABLE 1 RBAC availability and admin domain type Command Name User Admin Operator Switch Admin interfaceShow interOpMode O OM OM OM O OM OM OM iodDelayReset iodDelaySet iodDelayShow iodReset iodSet iodShow ipAddrSet ipAddrShow ipFilter iscsiCfg - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 754
A Command RBAC permissions and AD types TABLE 1 RBAC availability and admin domain type Command Name User Admin Operator Switch Admin miniCycle O OM OM OM msCapabilityShow O OM OM OM msConfigure O OM OM OM msPlatShow O OM OM OM msPlatShowDBCB O OM OM OM msPlClearDB O - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 755
admin domain type Command Name User Admin Operator Switch Admin perfCfgClear O perfCfgRestore O perfCfgSave O perfDelEEMonitor OM OM OM OM OM OM O O O OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM Basic Switch Admin O O O O O O O O O O O O O O O O OM O OM OM OM OM OM OM OM OM OM - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 756
OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM N OM OM OM OM Basic Switch Admin OM OM OM OM OM OM OM O OM OM OM OM O O O O O O O O O O O O O O O O O N OM O O OM Security Admin Domain Admin N Allowed/ PortMmember N PortMmember N PortMmember N PortMmember N SwitchMember - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 757
OM OM OM OM O OM N O OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM Basic Switch Admin O O O OM OM OM OM O O OM OM O O O O O O N O O O OM O O O O O O O O O O O O Security Admin Domain Admin N PortMember N SwitchMember N PortMember N SwitchMember N SwitchMember N SwitchMember N Allowed - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 758
OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM OM Basic Switch Admin O O O O O O O O O O O O O O O O O O O O O O O O O O OM OM O O O O O Security Admin Domain Admin N Allowed N SwitchMember N SwitchMember N SwitchMember N PortMember N SwitchMember N SwitchMember N SwitchMember - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 759
OM OM OM OM OM OM OM OM OM OM OM N OM OM OM OM OM OM OM O OM OM OM N OM N N OM Basic Switch Admin O O O O O O O O O O O OM O O N O O OM OM O O O O O O O N OM N N O Security Admin Domain Admin N Allowed N Allowed O Allowed OM Allowed OM SwitchMember OM SwitchMember OM SwitchMember OM - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 760
OM OM OM OM O OM OM OM OM OM Fabric Admin OM OM OM OM OM O OM OM OM OM OM Basic Switch Admin O O O O O O O O O O O Security Admin Domain Admin OM Allowed/ SwitchMember O Allowed O Allowed O Allowed O Allowed OM Allowed O Allowed O Allowed O Allowed O Allowed O Allowed 734 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 761
blade, 48 Bloom-based platform, 456, 505 Brocade 200E switch, 644 Brocade 4100 switch, 140, 141, 143, 146, 149, 151, 154, 155, 156, 157, 160, 162, 164, 166, 173, 644 Brocade 48000 director, 644 Brocade 4900 switch supported on the active CP, 719 commands supported on the standby CP, 719 Condor-based - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 762
certificates, 562 D default zone activating, 100 427 DLS, see dynamic load sharing DMA test, 162 domain name service, 119 dual CP system active CP and supportFTP, 625 dynamic load sharing 570, 642 FC4-16 port blade, 603 FC4-32 port blade, 603 736 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 763
, 608, 609, 629, 631, 632, 633, 644 FICON-MIB, 608, 609 FICON-TRAP, 609 field replaceable unit, see FRU filter-based monitor, 395, 402, 403, 404, 408 firmware download, 206, 208, 212, 213 firmware version, 190, 219, 696 FL_Port, 158, 159, 230, 250, 308, 423, 445, 448, 497, 498 FLOGI, 362, 366, 369 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 764
, 412, 629, 631, 632 Trunking, 674 link state record, 276, 336, 337 logical SAN, 334 login, 332 long distance settings, 91, 92, 128, 424, 425, 449, 451, 454, 457, 464, 465 108, 111, 143, 604, 636, 640 disabling, 103 power-on self-test, see POST 738 Fabric OS Command Reference 53-1000599-02 - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 765
primary FCS, 32, 33, 34, 35, 36, 56, 57, 58, 59, 60, 61, 63, 64, 68, 70, 71, 81, 350, 351, 352, 353, 354, 516, 568, 569, 571, 573, 581, 641 switch speed, 637 switchBeacon, 634 switchShow, 644 SW-TRAP, 609 syslog, 122, 655, 656, 659 sysShutdown active CP, 660 system services, 95, 679 system time zone - HP Brocade 8/12c | Brocade Fabric OS Command Reference Guide v6.1.0 (53-1000599- - Page 766
T tape pipelining, 511 temperature readings, 664 This, 517 time zone, 98, 679, 680 timeout value, 276, 541, 665 topology, 276, 286, 353, 354, 355, 445, 666, 667, 684 trace, 385, 623, 626, 627, 670 track-changes feature, 671, 672, 673 trackChangesSet, 672 trunkDebug, 674 Trunking, 674 turbo SRAM
53-1000599-02
12 March 2008
Fabric OS
Command Reference Manual
Supporting Fabric OS 6.1.0