HP C7280 User Guide - Page 267
Use only one card at a time, Card is inserted incorrectly, Card is not fully inserted, Card is damaged
UPC - 883585105137
View all HP C7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 267 highlights
Chapter 15 Solution: Remove the memory card and reinsert it correctly. The front label of the Compact Flash card faces left. Cause: You have not fully inserted the memory card. Solution: Remove the memory card and reinsert it in the memory card slot until it stops. Use only one card at a time Cause: Multiple memory cards are inserted in the HP All-in-One. Solution: You can insert only one memory card at a time. If more than one memory card is inserted, the Attention light will blink rapidly, and an error message will appear on the display. Remove the additional memory card to resolve the problem. Card is inserted incorrectly Cause: The card is inserted backwards or upside down. Solution: Turn the memory card so that the front label faces left and the contacts are on the right, and then push the card forward into the appropriate slot until the Photo light turns on. If the memory card is not inserted properly, the HP All-in-One will not respond and the Photo light (near the memory card slots) will not turn on. After the memory card has been inserted properly, the Photo light will blink for a few seconds, and then remain lit. Card is not fully inserted Cause: The card is not fully inserted. Solution: Make sure you fully insert the memory card into the appropriate slot on the HP All-in-One. If the memory card is not inserted properly, the HP All-in-One will not respond and the Photo light (near the memory card slots) will not turn on. After the memory card has been inserted properly, the Photo light will blink for a few seconds, and then remain lit. Card is damaged Cause: You formatted the card on a Windows XP computer. By default, Windows XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32 format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and cannot recognize a FAT32 formatted card. Troubleshooting 266 Troubleshooting