HP C7280 User Guide - Page 38
Wired network setup, This is known as a wired or Ethernet network. - troubleshooting
UPC - 883585105137
View all HP C7280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Finish setup (continued) If you want to: See this section: Change the HP All-in-One from a USB connection to a network connection. NOTE: Use the instructions in this section if you first installed the HP All-in-One with a USB connection, and you now want to change to either a wireless or Ethernet network connection. "Change the HP All-in-One from a USB connection to a network connection" on page 47 View or change the network settings. Find troubleshooting information. "Manage your network settings" on page 48 "Network troubleshooting" on page 183 NOTE: You can connect the HP All-in-One to either a wireless or wired network, but not both at the same time. Wired network setup This section describes how to connect the HP All-in-One to a router, switch, or hub using an Ethernet cable and how to install the HP All-in-One software for a network connection. This is known as a wired or Ethernet network. To set up the HP All-in-One on a wired network, you need to do the following: First, collect all of the required materials. Next, connect to a wired network. Finally, install the software. See this section: "What you need for a wired network" on page 38 "Connect the HP All-in-One to the network" on page 38 "Install the software for a network connection" on page 46 Connect to a network 37