HP CB015A User Manual - Page 51
To check printhead health, To print the print quality diagnostic Self-Test Diagnostic - service manual
View all HP CB015A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
When the quality of printouts deteriorates, complete the relevant steps based on the following sequence: 1. Check the health of the printheads. For more information, see To check printhead health. 2. Print the print quality diagnostic page on a clean sheet of white paper. Evaluate any problem areas, and perform the recommended actions. For more information, see To print the print quality diagnostic page. 3. Clean the printheads. For more information, see To clean the printheads. 4. Replace the printheads if the problems persist after cleaning. For more information, see To replace the printheads. CAUTION: HP is not responsible for damage to the device that results from modifying the printheads. This section covers the following printhead maintenance tasks: • To check printhead health • To print the print quality diagnostic page • To calibrate the linefeed • To clean the printheads • To align the printheads • To clean the printhead contacts manually • To replace the printheads To check printhead health Use one of the following means to check the printhead health. If the status of any printhead is not good or fair, then perform one or more of the maintenance functions, or clean or replace the printhead. • Self-Test Diagnostic Page: Print the self-test diagnostic page on a clean sheet of white paper, and check the printhead health section. For more information, see Understand the self-test diagnostic page. • Embedded Web server: Open the embedded Web server. For more information, see Embedded Web server. Click the Information tab, and then click Ink Supplies in the left pane. • Toolbox (Windows): Open the Toolbox. For more information, see To open the Toolbox. Click the Information tab, and then click Printhead Health. To print the print quality diagnostic page Use the print quality diagnostic page to diagnose issues affecting the print quality. This will help you decide whether to run any maintenance services to improve the print quality of your printouts. You can also view the ink level information, and the printhead health status on the page. • Control panel: Press and hold (Power button), press (Cancel button) seven times, press (Resume button) two times, and release (Power button). • Embedded Web server: Click the Settings tab, click Device Services in the left pane, select Print PQ (print quality) diagnostic page from the drop-down list in the Print Quality section, and then click Run Diagnostic. Maintain the printheads 47