HP CP1518ni HP Color LaserJet CP1510 Series - Software Technical Reference - Page 94
Device Settings folder - Extended Print Modes pane 2 of 2, Extended Print Modes, Media Types, Optimize - drum
UPC - 883585140633
View all HP CP1518ni manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Figure 2-45 Device Settings folder - Extended Print Modes pane (2 of 2) Software Description The Extended Print Modes screen contains a Media Types section and an Optimize section. Table 2-8 Optimize Modes - Optimize menu Adjustment Range (*default) Description Background toner Off*/On Optimize printer settings to reduce background toner. (Glossy media picks up background toner more readily than plain media.) Extra drum cleaning Off*/On Talc from paper with high talc content gets coated on the imaging drums and degrades the image quality. The printer will use extra cleaning rotations when stopping to eliminate this coating on the drums. Drum banding Off*/On This mode reduces the occurrence of sharp lines at the OPC drum pitch (75mm) by extra pre-rotations and by jogging the drums slightly after each job. The jogging motion is slightly audible. Transfer belt cleaning Off*/+1 to +2 This mode increases transfer belt (ITB) cleaning effectiveness by increasing the ICL (ITB Cleaning) roller/brush voltage for the +1 setting, and by increasing cleaning frequency for the +2 setting. This should be used when the ghost of 70 Chapter 2 Software Description ENWW