HP CP3505 HP Color LaserJet CP3505 Series Printers - User Guide - Page 147
Control-panel messages, LOAD TRAY X <TYPE> <SIZE> - insufficient memory
View all HP CP3505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Control panel message 13.XX.YY JAM INSIDE TOP COVER alternates with Description Recommended action See Clear jams from input trays on page 150. If the message persists after clearing all pages and exiting Help, contact HP Support. A page is jammed underneath the front cover. Open the front door and remove any jammed media. For help press 20 INSUFFICIENT MEMORY alternates with The printer has received more data from the 1. computer than fits in available memory. Press to continue printing. NOTE: Data will be lost. For help press To continue press 2. Reduce the complexity of the print job to avoid this error. 3. Adding memory to the printer may allow printing of more complex pages. 22 EIO X BUFFER OVERFLOW alternates with The printer EIO card in slot X has overflowed 1. its I/O buffer during a busy state. Press to continue printing. NOTE: Data will be lost. To continue press 2. If the message persists, contact HP Support. 22 EMBEDDED I/O BUFFER OVERFLOW The embedded HP Jetdirect print server buffer has overflowed during a busy state. 1. Press to continue printing. NOTE: A loss of data will occur. 2. If the message persists, contact HP Support. 22 USB I/O BUFFER OVERFLOW alternates with The printer's USB buffer has overflowed during a busy state. 1. Press to continue printing. NOTE: Data will be lost. To continue press 2. If the message persists, contact HP Support. 40 EIO X BAD TRANSMISSION alternates with A connection with the card in the EIO slot has 1. broken. Press to continue printing. NOTE: Data will be lost. To continue press 2. If the message persists, contact HP Support. 40 EMBEDDED I/0 BAD TRANSMISSION alternates with The connection with the HP Jetdirect embedded print server has broken. Press to continue printing. To continue press 41.3 UNEXPECTED SIZE IN TRAY X alternates with LOAD TRAY X Media is loaded that is longer or shorter in the 1. feed direction than the size configured for the tray. 2. Press to print from a different tray. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again. See Configure trays on page 73 for more information. ENWW Control-panel messages 135