HP CP3505 HP Color LaserJet CP3505 Series Printers - User Guide - Page 150
Tray size cannot be ANY SIZE/ANY, ACTION NOT CURRENTLY AVAILABLE
View all HP CP3505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Control panel message To change press To skip, press STOP Access Denied MENUS LOCKED ACTION NOT CURRENTLY AVAILABLE ON TRAY X alternates with Tray size cannot be ANY SIZE/ANY CUSTOM BAD DUPLEXER CONNECTION alternates with To continue turn off then on Calibrating... Canceling... Checking paper path Checking printer CHOSEN PERSONALITY NOT AVAILABLE alternates with To continue press CLEANING DISK X% COMPLETE alternates with DO NOT POWER OFF Cleaning... Clearing event log Description Recommended action The printer has an internal clock that tracks the date and time. You are prompted to set the correct date and time the first time you turn on the printer. Press to change the date and time. Press Stop to skip this step. You can set the date and time later by using the SYSTEM SETUP menu. If the prompt appears each time you turn on the printer, the clock is not working correctly. Contact HP support. The printer administrator has enabled the control-panel security mechanism. You cannot modify control-panel settings in this circumstance. The message disappears after a few seconds, and the printer returns to Ready or BUSY state. Contact the printer administrator to change settings. You are trying to set duplex registration for a tray that is configured for ANY SIZE or ANY CUSTOM. Duplex registration is not available when the tray size is set to either of these settings. Change the size setting for the tray. The duplexer is not installed correctly. Turn the printer off and then on to continue. The printer is calibrating. No action necessary. The printer is in the process of canceling a job. The message appears while the job is stopped, the paper path is flushed, and any remaining incoming data on the active data channel is received and discarded. No action necessary. The engine is turning the rollers to check for No action necessary. possible jams. The engine is performing an internal test. No action necessary. The printer encountered a request for a personality that did not exist in the printer. The job is cancelled and no pages are printed. 1. Press to continue. 2. Try a different driver. The memory disk is being cleaned. This process might take up to an hour. During this time, no jobs can be printed. Do not turn off the printer. Wait for the process to complete. The printer automatically restarts at the end of the cleaning process. The printer is processing the cleaning page. No action necessary. This message appears while the event log is No action necessary. cleared. The printer then returns to the SERVICE menu. 138 Chapter 11 Problem solve ENWW