HP CP3505 HP Color LaserJet CP3505 Series Printers - User Guide - Page 158
Tray Xx Empty <type> <size>, Type Mismatch In Tray Xx
View all HP CP3505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 158 highlights
Control panel message SANITIZING DISK X% COMPLETE alternates with DO NOT POWER OFF Setting saved SIZE MISMATCH IN TRAY XX alternates with Ready Sleep mode on STANDARD TOP BIN FULL alternates with Remove all paper from bin Tray X alternates with To change size or type press TRAY XX EMPTY alternates with Ready TRAY XX OPEN For help press alternates with Ready TRAY XX OPEN OR EMPTY alternates with Ready TYPE MISMATCH IN TRAY XX alternates with Ready Unauthorized supply in use alternates with Ready Description Recommended action The memory disk is being sanitized. This process might take up to an hour. During this time, no jobs can be printed. Do not turn off the printer. Wait for the process to complete. The printer automatically restarts at the end of the sanitation process. A menu selection has been saved. No action necessary. The tray is loaded with a media size that is 1. Make sure the media guides are different than the size for which the tray is adjusted correctly. configured. Printing can continue from other trays, but not from this one. 2. In the PAPER HANDLING menu, configure the tray for the correct size. The printer is in the sleep mode. Any button No action necessary. The printer press or the receipt of data clears sleep automatically exits sleep mode. mode. The output bin is full. Printing cannot continue. Empty the output bin. Printing resumes automatically. The printer is reporting the current configuration of tray X. The tray is empty, but the current print job does not require this tray. No action necessary. Press to clear the message. Press to change the type or size. See Configure trays on page 73 for more information. Fill the tray. The message indicates the type and size of media for which the tray is currently configured. The tray is open, but printing can continue. Close the tray. The tray is open or empty, but the current print job does not require this tray. Close or fill the tray. The tray is loaded with a media type that is different than the type for which the tray is configured. Printing can continue from other trays, but not from this one. In the PAPER HANDLING menu, configure the tray for the correct type. The printer has detected that a non-HP supply is currently installed and (override) was pressed. If you believe you purchased an HP supply, go to www.hp.com/go/anticounterfeit. Service or repairs required as a result of using non-HP supplies are not covered under HP warranty. 146 Chapter 11 Problem solve ENWW