HP CP3505 HP Color LaserJet CP3505 Series Printers - User Guide - Page 69
Disable network protocols (optional), Disable IPX/SPX, Disable AppleTalk, CONFIG METHOD, MANUAL
View all HP CP3505 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
7. Press to select CONFIG METHOD. 8. Press to highlight MANUAL, and then press . 9. Press to highlight MANUAL SETTINGS, and then press . 10. Press to highlight DEFAULT GATEWAY, and then press . 11. Press the or arrow to increase or decrease the number for the first byte of the default gateway. 12. Press to move to the next set of numbers. (Press to move to the previous set of numbers.) 13. Repeat steps 10 and 11 until the correct default gateway is entered, and then press to save the default gateway. 14. Press Menu to return to the Ready state. Disable network protocols (optional) By factory default, all supported network protocols are enabled. Disabling unused protocols has the following benefits: ● Decreases printer-generated network traffic ● Prevents unauthorized users from printing to the printer ● Provides only pertinent information on the configuration page ● Allows the printer control panel to display protocol-specific error and warning messages Disable IPX/SPX NOTE: Do not disable this protocol in Windows-based systems that print to the printer using IPX/SPX. 1. Press Menu. 2. Press to highlight CONFIGURE DEVICE, and then press . 3. Press to highlight I/O, and then press . 4. Press to highlight EMBEDDED JETDIRECT, and then press . 5. Press to highlight IPX/SPX, and then press . 6. Press to select ENABLE. 7. Press to highlight OFF, and then press . 8. Press Menu to return to the Ready state. Disable AppleTalk 1. Press Menu. 2. Press to highlight CONFIGURE DEVICE, and then press . 3. Press to highlight I/O, and then press . 4. Press to highlight EMBEDDED JETDIRECT, and then press . ENWW Network configuration 57