HP CP6015dn HP Color LaserJet CP6015 Series - User Guide - Page 45

Item Sub-item DISPLAY BRIGHTNESS PERSONALITY CLEARABLE WARNINGS AUTO CONTINUE REPLACE SUPPLIES Values Range is 1 through 10. AUTO PCL PDF PS JOB ON OFF ON STOP AT LOW STOP AT OUT OVERRIDE AT OUT 1 OVERRIDE AT OUT 2 Description causes minimal impact to the firstpage-out time. If SAVE MOST ENERGY is selected, power to the fuser is turned off after each job. This causes the most impact to the firstpage-out time. Sets the brightness of the control panel display. The default is 5. Sets the default personality to automatic switching, PCL, PDF, or PS modes. The default is AUTO. Sets whether a warning is cleared on the control panel or when another job is sent. The default is ON. Determines product behavior when the system generates an Auto Continuable error. The default is ON. Sets product behavior when a cartridge is low. The default is STOP AT LOW. This option allows the product to continue printing until a color supply is exhausted. When the product is set to STOP AT OUT, printing pauses until the color supply is replaced. The product displays an "Order supplies" message when a supply is running low and a "Replace supplies" message when a supply has been depleted. To ensure optimal print quality, HP recommends replacing a supply when the "Replace supplies" message is displayed. Replacing the supply at this point can help prevent waste of media or other supplies when one supply begins producing poor print quality. The Override options allow the product to continue using color supplies, such as print cartridges, the image drum, the roller kit, and the image fuser kit, that have reached their recommended replacement points. ENWW Configure device menu 31