HP CP6015dn HP Color LaserJet CP6015 Series - User Guide - Page 50
I/O menu, To display, CON DEVICE
UPC - 883585363018
View all HP CP6015dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
I/O menu Items on the I/O (input/output) menu affect the communication between the product and the computer. If the product contains an HP Jetdirect print server, you can configure basic networking parameters by using this submenu. You can also configure these and other parameters through HP Web Jetadmin or the embedded Web server. For more information on these options, see Configure network settings on page 78. To display: Press Menu, select CONFIGURE DEVICE, and then select I/O. Item I/O TIMEOUT Sub-item Values 15 SECONDS Range: 5 - 300 EMBEDDED JETDIRECT MENU See the next table for a list of options. Description Allows you to set the product I/O TIMEOUT in seconds. Use this setting to adjust timeout for the best performance. If data from other ports appears in the middle of your print job, increase the timeout value. Table 2-1 Embedded Jetdirect and EIO Jetdirect menus Item Sub-item Values TCP/IP ENABLE OFF ON HOST NAME IPV4 SETTINGS CONFIG METHOD ● BOOTP ● DHCP ● AUTO IP ● MANUAL DEFAULT IP ● AUTO IP ● LEGACY Description OFF: Disable the TCP/IP protocol. ON*: Enable the TCP/IP protocol. An alphanumeric string, up to 32 characters, used to identify the product. This name is listed on the HP Jetdirect configuration page. The default host name is NPIxxxxxx, where xxxxxx is the last six digits of the LAN hardware (MAC) address. Specifies the method that TCP/IPv4 parameters will be configured on the HP Jetdirect print server. Use BootP (Bootstrap Protocol) for automatic configuration from a BootP server. Use DHCP (Dynamic Host Configuration Protocol) for automatic configuration from a DHCPv4 server. If selected and a DHCP lease exists, DHCP RELEASE and DHCP RENEW menus are available to set DHCP lease options. Use Auto IP for automatic link-local IPv4 addressing. An address in the form 169.254.x.x is assigned automatically. Use the MANUAL SETTINGS menu to configure TCP/ IPv4 parameters. Specify the IP address to default to when the print server is unable to obtain an IP address from the network during a forced TCP/IP reconfiguration (for example, when manually configured to use BootP or DHCP). 36 Chapter 2 Control panel ENWW