HP CP6015dn HP Color LaserJet CP6015 Series - User Guide - Page 51
Embedded Jetdirect and EIO <X> Jetdirect menus continued, Table 2-1
UPC - 883585363018
View all HP CP6015dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Table 2-1 Embedded Jetdirect and EIO Jetdirect menus (continued) Item Sub-item Values Description AUTO IP: A link-local IP address 169.254.x.x is set. LEGACY: The address 192.0.0.192 is set, consistent with older HP Jetdirect products. DHCP RELEASE ● NO ● YES This menu appears if CONFIG METHOD was set to DHCP and a DHCP lease for the print server exists. NO*: The current DHCP lease is saved. YES: The current DHCP lease and the leased IP address are released. DHCP RENEW ● NO ● YES This menu appears if CONFIG METHOD was set to DHCP and a DHCP lease for the print server exists. NO*: The print server does not request to renew the DHCP lease. YES: The print server requests to renew the current DHCP lease. MANUAL SETTINGS ● IP ADDRESS ● SUBNET MASK ● SYSLOG SERVER ● DEFAULT GATEWAY ● IDLE TIMEOUT (Available only if CONFIG METHOD is set to MANUAL) Configure parameters directly from the printer control panel: IP ADDRESS: The unique IP address of the printer, where n is a value from 0 to 255. SUBNET MASK: The subnet mask for the printer, where m is a value from 0 to 255. SYSLOG SERVER: The IP address of the syslog server used to receive and log syslog messages. DEFAULT GATEWAY: The IP address of the gateway or router used for communications with other networks. IDLE TIMEOUT: The time period, in seconds, after which an idle TCP print data connection is closed (default is 270 seconds, 0 disables the timeout). PRIMARY DNS Specify the IP address (n.n.n.n) of a Primary DNS Server. SECONDARY DNS Specify the IP address (n.n.n.n) of a Secondary Domain Name System (DNS) Server. IPV6 SETTINGS ENABLE ● OFF ● ON Use this item to enable or disable IPv6 operation on the print server. OFF*: IPv6 is disabled. ON: IPv6 is enabled. ADDRESS ● MANUAL SETTINGS ● ADDRESS Use this item to manually configure an IPv6 address. Use the MANUAL SETTINGS menu to enable and manually configure a TCP/ IPv6 address. Select ENABLE and choose ON to enable manual configuration, or OFF to disable manual configuration. ENWW Configure device menu 37