HP Cc3310 ISM Readme: Important Information about ISM 5.5.5 For Your HP cc3310

HP Cc3310 - Server - AC Option Manual

HP Cc3310 manual content summary:

  • 1
  • 2
  • 3

© Copyright 2006
cc3310_W2K3_ISM_read
Hewlett-Packard Development Company, L.P.
January 2006
v2
Printed in the U.S.A.
ISM Readme: Important Information about ISM 5.5.5
For Your HP cc3310 Carrier Grade Server
Important Notes
This Readme contains important information about:
“System Requirements”
“Installation”
“Additional Instrumentation Setup”
“Independent Hardware Vendor (IHV) Instrumentation”
“LANAlert Viewer”
“Serial Port Limitations”
“Interrupting the Power On/Off Loop with LRA.NOT File”
System Requirements
The ISM supports the following operating systems for the cc3310 Carrier Grade Server:
Red Hat Enterprise Linux 3 Enterprise Server (Kernel 2.4.21-4.EL and higher: AS and ES versions)
Microsoft® Windows® 2000 Advanced Server (AS) (Service Pack 3 and higher)
Microsoft Windows 2003 AS
The ISM supports the following operating systems for the system management console:
Windows 2000 AS (Service Pack 3 and higher)
Windows 2000 Professional (Service Pack 3 and higher)
Windows XP Professional
Windows 2003 AS
If you are using an Intel LAN Adapter (EtherExpressTM, PRO/100b LAN Adapter, or others), download and install the
most current driver from http://support.intel.com.
Installation
The ISM services on a managed server can take a few minutes to completely initialize.
The time required varies
depending on the speed of the server and the software installed.
Reboot your system (console or server) after installing any ISM component.
If an ISM console is started in order to manage the server prior to all the services being initialized, ISM may display
incomplete information.
You may also notice a sluggish response from the console or not all the sensor folders being
displayed, due to the length of initialization of network protocols.