HP Cisco MDS 9216A Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel
HP Cisco MDS 9216A - Fabric Switch Manual
View all HP Cisco MDS 9216A manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Cisco MDS 9216A manual content summary:
- HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 1
release notes. Removed the Limitation "Upgrading an MDS 9222i Switch with an Active FC-Redirect Configuration." Added DDTS CSCsy37951. Added Oracle 11g Enterprise Edition and Oracle 10g Enterprise Edition to the list of software supported by Cisco Fabric Manager and Device Manager, in the "Upgrading - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 2
38 • Caveats, page 45 • Related Documentation, page 52 • Obtaining Documentation and Submitting a Service Request, page 53 Introduction The Cisco MDS 9000 Family of Multilayer Directors and Fabric Switches provides industry-leading availability, scalability, security, and management, allowing you to - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 3
only Storage Services Enabler License MDS 9222i Switch only Storage Services Enabler License for one MSM-18/4 module MDS 9200 Series only Data Mobility Manager License for one MSM-18/4 module MDS 9500 Series only Data Mobility Manager License for Cisco MDS 9222i MDS 9222i Switch Data Mobility - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 4
) MDS 9506 Switch Cisco MDS 9222i Multilayer Fabric Switch (3-rack-unit (3RU) semimodular multilayer fabric switch with 18 4-Gbps Fibre Channel ports, 4 Gigabit Ethernet ports, and a modular expansion slot for Cisco MDS 9000 Family Switching and Services modules) MDS 9222i Switch Cisco MDS 9216i - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 5
SFP+ LC connectors MDS 9500 Series MDS 9222i Switch Cisco MDS 9000 18/4-Port Multiservice Module (MSM-18/4) - 18-port, 4-Gbps Fibre Channel plus 4-port Gigabit Ethernet IP services and switching module with SFP LC connectors MDS 9500 Series MDS 9200 Series Cisco MDS 9000 14/2-Port Multiprotocol - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 6
reach (40 MDS 9500 Series km) MDS 9200 Series MDS 9134 Switch X2 SC optics, 10-Gbps Fibre Channel over copper MDS 9500 Series MDS 9200 Series MDS 9134 Switch X2 SC optics, 10-Gbps Ethernet for short reach MDS 9500 Series MDS 9200 Series Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 7
, MDS 9222i, DS-X9100, and DS-X9200 Series switching modules SFP optics (LC type) for 1- or 2-Gbps Fibre Channel for shortwave mode; not supported for use in 4-Gbps-capable ports MDS 9000 Series SFP optics (LC type) for 1- or 2-Gbps Fibre Channel for MDS 9000 Series longwave mode for Cisco MDS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 8
traffic in a switched fabric Smart Card Reader DS-SCR-K9 Storage Media Encryption (SME) Smart Card Reader MDS 9000 Family Smart Card DS-SC-K9 SME Smart Card MDS 9000 Family CD-ROM M90FM-CD-441 Cisco MDS 9000 Management Software and Documentation MDS 9000 Family CD-ROM for Cisco MDS 9000 NX - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 9
the MDS hardware chassis supported by Cisco MDS NX-OS 4.x. Table 3 Cisco MDS NX-OS 4.x Chassis Support Matrix Switch MDS 9513 MDS 9509 MDS 9506 MDS 9222i MDS 9216i MDS 9216A MDS 9216 MDS 9134 MD S 9124 MDS 9140 MDS 9120 Cisco Fabric Switch for HP c-Class BladeSystem and Cisco Fabric Switch for - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 10
Gbps IP Switching Module 1. Requires DS-13SLT-FAB2 in the MDS 9513. MDS 9500 Series MDS 9222i MDS 9216i Yes No Yes Yes No Yes Yes Yes Yes No No No No No No Table 5 lists the MDS hardware modules supported by Cisco MDS SAN-OS 3.x. Table 5 Module Support Matrix for Cisco MDS SAN-OS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 11
from Supervisor-2 modules to Supervisor-1 modules is not supported. To migrate from a Supervisor-1 module to a Supervisor-2 module, refer to the step-by-step instructions in the Cisco MDS 9000 Family Software Upgrade and Downgrade Guide. Software Download Process Use the software download procedure - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 12
supported by your vendor for all Cisco MDS 9000 Family products. Downloading Software The Cisco MDS your Cisco MDS 9000 switch. Issuing the install all command from the CLI, or using Fabric Manager Compatibility" section of the Cisco MDS 9000 Family CLI Configuration Guide for more details. Note - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 13
you use, as shown in Table 6. Table 6 Software Images for MDS 9100 Series Switches Cisco MDS 9100 Series Switch Type Supervisor Module Type 9124, 9134, Cisco Fabric Switch for HP c-Class BladeSystem, Cisco Fabric Switch for IBM BladeCenter Supervisor-2 module Naming Convention Filename begins - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 14
process that involves installing a database, as well as Fabric Manager. The complete installation instructions are provided in the "Installation of Cisco MDS NX-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide, and are available on-screen once you launch - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 15
been tested with Cisco Fabric Manager. See Table 9 for the supported upgrade paths for Cisco Fabric Manager. Step 1 Verify supported software. Cisco Fabric Manager and Device Manager have been tested with the following software: OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 16
database, follow the instructions in the "Installation of Cisco MDS SAN-OS and Fabric Manager" section in the Cisco MDS 9000 Family Fabric Manager Configuration Guide. Refer to Table 9 for information on the supported upgrade path. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 17
following command on the DOS prompt before installing Fabric Manager Server. Step 1 Step 2 Open a command-line prompt: Start > Run, then type cmd and press Return. At the command prompt type: user /install. OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 17 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 18
page 15 for the list of supported software that has been tested with Cisco Fabric Manager. See Table 9 for the supported upgrade paths for Fabric Manager. To install Device Manager on your workstation, follow these steps: Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 18 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 19
" section on page 28. • Make note of the information concerning SANTap when performing upgrades on a Cisco MDS 9222i switch, as described in "Upgrading an MDS 9222i Switch with SANTap or Invista is Provisioned on the SSM" section on page 20. • Be aware of the impact of an upgrade on VSAN 4079 if - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 20
traffic. Upgrading an MDS 9222i Switch with SANTap or Invista is Provisioned on the SSM On an MDS 9222i switch, if SANTap or Invista is provisioned on a Storage Services Module (SSM) in slot 2, then an In Service Software Upgrade (ISSU) to NX-OS Release 4.1(3a) is not supported. The upgrade to - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 21
-OS Software Image Send documentation comments to mdsfeedback-doc.com. Table 10 Nondisruptive Upgrade Path to Cisco MDS NX-OS Release 4.1(3a) Current Nondisruptive Upgrade Path NX-OS 4.1(1c) You can nondisruptively upgrade directly to NX-OS Release 4.1(3a) NX-OS 4.1(1b) You - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 22
NX-OS Software Image Send documentation comments to mdsfeedback-doc.com. Table 10 Nondisruptive Upgrade Path to Cisco MDS NX-OS Release 4.1(3a) (continued) Current Nondisruptive Upgrade Path SAN-OS 2.1(1b) Upgrade to SAN-OS Release 2.1(2b), then upgrade to Release 3.3(x), and then upgrade - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 23
upgrading to Release 2.0(2b) and then upgrade to 1.3(4a). Upgrading with IVR Enabled An Inter-Switch Link (ISL) flap resulting in fabric segmentation or a merge during or after an upgrade from Cisco MDS SAN-OS Release 2.0(x) to a later image where IVR is enabled might be disruptive. Some possible - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 24
, and then follow the upgrade guidelines listed in the "Upgrading Your Version of Cisco Fabric Manager" section on page 14. If you have VSANs in interop mode 2 are adding new switches running Cisco MDS SAN-OS Release 2.1(2b) or later, upgrade all of your existing switches to Cisco SAN-OS Release - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 25
when the admin port mode is auto. (A quad is a group of four ports, supported by a data path processor (DPP). The groups are 1 to 4, 5 to 8, shutdown. switch# config t switch(config)# interface fc 2/2 switch(config-if)# shutdown OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 26
conditions: - Upgrade the SSI boot images on the SSMs on the switch to a release version supported by your Cisco SAN-OS release. Refer to the Cisco MDS NX-OS Release Compatibility Matrix for Storage Service Interface Images. - All SSM applications are disabled. Use the show ssm provisioning - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 27
either Fabric Manager or the copy command. If the switch fails to boot, then follow the recovery procedure described in the "Troubleshooting Installs, Upgrades, and Reboots" section of the Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x. Upgrading a Cisco MDS 9124 or Cisco MDS 9134 Switch - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 28
that you follow the nondisruptive upgrade path. Note You cannot upgrade an MDS 9120 switch or an MDS 9140 switch to Cisco NX-OS 4.x. See Table 3 for the list of switches that support Cisco NX-OS 4.x Downgrading Your Cisco MDS SAN-OS Software Image This section lists the guidelines recommended for - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 29
and the MDS 9222i switch. Those nodes that are members of VSANs traversing an FCIP ISL are impacted, and a fabric reconfiguration occurs. are downgrading from Cisco SAN-OS Release 2.1.(1a), 2.1(1b), or 2.1.(2a). See the "Upgrading with IVR Enabled" section on page 23 for these instructions. - FICON: - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 30
Downgrading Your Cisco MDS SAN-OS Software Image Send documentation comments to mdsfeedback-doc.com. Table 12 to SAN-OS Release 3.3(x) first, then to Release 2.1(2x), and then downgrade to Release 2.0(2b). Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 30 OL-17675-05 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 31
Downgrading Your Cisco MDS SAN-OS Software Image Send documentation comments to mdsfeedback-doc.com. Table 12 Nondisruptive before nondisruptively downgrading to Release 2.0(2b) and then downgrade to 1.3(4a). OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 31 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 32
the SSI boot images on the SSMs on the switch to a release version supported by your Cisco SAN-OS release. Refer to the Cisco MDS SAN-OS Release Compatibility Matrix for Storage Service Interface Images. • SSM intelligent services traffic switching on SSM ports is disrupted on upgrades or downgrades - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 33
Manager Enhancements, page 34 - Cisco Data Mobility Manager Method 3, page 34 - Support for DMM on the MDS 9222i Switch, page 34 • Cisco Storage Media Encryption Enhancements, page 34 - Media Key Auto-replication, page 34 - High Availability KMC, page 35 • Cisco Fabric Manager Release 4.1(3a) New - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 34
fabric SAN Multiservice Module (MSM-18/4). Support for DMM on the MDS 9222i Switch Starting with Cisco NX-OS Release 4.1(3a), the MDS 9222i Multiservice Modular Switch supports Cisco DMM without requiring an SSM module in the MDS 9222i switch. Cisco Storage Media Encryption Enhancements Cisco MDS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 35
reach the primary KMC, it automatically switches to the secondary. While using the secondary Fabric Manager Installer Changes The following changes have been made to the Cisco Fabric Manager installer in Cisco NX-OS Release 4.1(3a): OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 36
FMS) package, Storage Services Enabler (SSE) package, Storage Media Encryption package, and Data Mobility Manager package. On-demand ports activation licenses are also available for the Cisco MDS Blade Switch Series, and 4-Gbps Cisco MDS 9100 Series Multilayer Fabric Switches. Enterprise Package The - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 37
9000 SSE package allows network-based storage applications and services to run on the Cisco MDS 9000 family SSMs, Cisco MDS 9000 18/4-Port Multiservice Module (MSM-18/4), and Cisco MDS 9222i. Intelligent fabric applications simplify complex IT storage environments and help organizations gain control - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 38
fabric support, and management using Cisco Fabric Manager provide a complete solution that greatly simplifies and eliminates most downtime associated with data migration. Refer to the Cisco MDS port on Cisco MDS switches supports one user-configured IPv6 address, but does not support auto- - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 39
VSANs. 2. This makes the Cisco MDS behavior consistent with other Cisco products such as Nexus 7000 which Hat Enterprise Linux The Linux kernel core dump is not supported in NX-OS Release 4.1(1b) and later versions and 1 Module Limitation When a Cisco or other vendor switch port is connected to a - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 40
supported, including IVR zones, in the active zone set is 2047. InterVSAN Routing When using InterVSAN Routing (IVR), it is recommended to enable Cisco Fabric Services (CFS) on all IVR-enabled switches and retry. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 40 OL-17675-05 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 41
. Table 14 Cisco SME Limits Configuration Number of switches in the fabric Number of clusters per switch Switches in a cluster Fabrics in a cluster Modules in a switch Cisco MSM-18/4 does not have this issue. OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 41 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 42
1 of the MDS 9222i switch, even though that did support RSA version cisco.com > phone-contact +14087994089 > streetaddress xyxxyx > distribute > destination-profile testProfile > destination-profile testProfile format XML Cisco MDS 9000 Family Release Notes for Cisco MDS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 43
components: • DS-C9216i-K9, Cisco MDS 9216i Multilayer Fabric Switch • DS-X9016, Cisco MDS 9000 2-Gbps16-Port Fibre Channel Switching Module • DS-X9032, Cisco MDS 9000 2-Gbps 32-Port Fibre Channel Switching Module • DS-X9032-14K9, Cisco MDS 9000 14/2-Port Multiprotocol Services Module (MPS-14/2) For - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 44
Fabric Identifier. Available as a Virtual Fabric Identifier. Reserved. Control VF-ID (see Fibre Channel Link Services (FC-LS) and Fibre Channel Switch Fabric on the MSM-18/4 The Cisco MDS 9000 18/4-Port Multiservice Module (MSM-18/4) does not support multiple, concurrent storage applications. Only - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 45
Software Release (Open or Resolved) 4.1(3a) O R O R O R O R O R O R O R O R O O O R O O O R O R O R O R O R O R O R O R O R O R O O O R O R O R O R O R O R OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 45 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 46
R R O O O Resolved Caveats • CSCsi72048 Symptom: FCIP links may fail on an MDS 9216i switch that has compression set to auto when the other end of the FCIP link is terminated by Cisco Fabric Manager" is created on the desktop. Then, using Fabric Manager Web Client again, you download another Fabric - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 47
Symptom: During an upgrade from Cisco MDS SAN-OS Release 3.3(1c) to Cisco NX-OS 4.1(1b) and later, applications might experience a very small amount of packet drops in the fabric. Most of the applications should be able to recover from such a small packet loss. The problem is seen only with an - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 48
commands are available. When upgrading to Cisco SAN-OS 3.2(1c) from a earlier version, the scheduler is enabled by default. Workaround: This issue is resolved. • CSCsu42003 Symptom: When an FCIP tunnel is configured with IPsec between an MDS 9222i switch and an MDS 9216i switch, it fails to come up - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 49
) go to the OK state when plugged into a Cisco MDS 9216i switch. The MDS 9216i switch does not support these two modules in NX-OS Release 4.1(1b). Workaround Workaround: This issue is resolved. • CSCsv15452 Symptom: The Fabric Manager Server Performance Manager does not show fcflow statistics for all - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 50
between two MDS switches, one running MDS NX-OS Release 4.1(1c) and the other running MDS NX-OS Symptom: When you click Resync Open Fabric in Fabric Manager, the fabric configuration appears to be saved to the Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 50 OL-17675-05 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 51
a nondisruptive downgrade, even though the fport-channel-trunk feature is not supported in NX-OS 4.1(1x) releases. As a result, the switch is in an inconsistent state after the downgrade. Workaround: None. OL-17675-05 Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a) 51 - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 52
Guide • Cisco MDS 9124 Multilayer Fabric Switch Quick Start Guide • Cisco MDS 9020 Fabric Switch Hardware Installation Guide Cisco Fabric Manager • Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide • Cisco MDS 9000 Family Fabric Manager Configuration Guide • Cisco MDS 9000 Fabric - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 53
Configuration Guide • Cisco MDS 9000 Family Secure Erase Configuration Guide - For Cisco MDS 9500 and 9200 Series Troubleshooting and Reference • Cisco MDS 9000 Family Troubleshooting Guide • Cisco MDS 9000 Family MIB Quick Reference • Cisco MDS 9020 Fabric Switch MIB Quick Reference • Cisco MDS - HP Cisco MDS 9216A | Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Rel - Page 54
desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. This document is to be used in conjunction and coincidental. © 2009 Cisco Systems, Inc. All rights reserved. Cisco MDS 9000 Family Release Notes for Cisco MDS NX-OS Release 4.1(3a)
Send documentation comments to mdsfeedback-doc.com.
Americas Headquarters:
© 2009 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706
USA
Cisco MDS 9000 Family Release Notes
for Cisco MDS NX-OS Release 4.1(3a)
Release Date: March 11, 2009
Part Number: OL-17675-05 E0
This document describes the caveats and limitations for switches in the Cisco MDS 9000 Family. Use
this document in conjunction with documents listed in the
“Related Documentation” section on page 52
.
Note
Release notes are sometimes updated with new information on restrictions and caveats. Refer to the
following website for the most recent version of the
Cisco MDS 9000 Family Release Notes
:
Table 1
shows the on-line change history for this document.
Contents
This document includes the following:
Table 1
Online History Change
Revision
Date
Description
A0
03/11/2009
Created release notes.
B0
03/13/2009
Removed the Limitation “Upgrading an MDS 9222i Switch
with an Active FC-Redirect Configuration.”
C0
03/16/2009
Added DDTS
CSCsy37951
.
Added Oracle 11g Enterprise Edition and Oracle 10g
Enterprise Edition to the list of software supported by Cisco
Fabric Manager and Device Manager, in the
“Upgrading Your
Version of Cisco Fabric Manager”
section.
D0
03/18/2009
Added DDTS
CSCsu23984
.
E0
03/19/2009
Added DDTS
CSCsy52780
.