HP Color LaserJet Enterprise CP5525 Service Manual - Page 408

Display Settings menu In the following table, asterisks (*) indicate the factory default setting. Table 3-37 Display Settings menu First level Second level Values Display Brightness Range: -10 to 10 Default = 0 Language Show IP address Sleep Mode Select from a list of languages that the product supports. Display* Hide Use sleep delay* Use sleep schedule Use Both Inactivity Timeout Clearable Warnings Range: 10 - 300 seconds Default = 60 On Job* Continuable Events Auto continue (10 seconds)* Press OK to continue Description Sets the brightness of the control panel display. The default is 0. This item also controls the viewing angle at which the display is visible. Sets the language. The default language is ENGLISH. Use this feature to display or hide the IP address on the control-panel display. The sleep delay setting helps save energy by having the product enter a low-power mode after a certain time of inactivity. The sleep schedule automatically wakes up the product at the start of the workday. The sleep schedule can be configured using the EWS. Idle Timeout: The time period, in seconds, after which an idle TCP print data connection is closed (default is 60 seconds, 0 disables the timeout). Sets whether a warning is cleared on the control panel or when another job is sent. Job: The warning message disappears at the end of the job. On: The warning message remains until you press the OK button. Determines product behavior when the system generates an Auto Continuable error. On: Allows the product to continue printing. Off: Stops the product from printing until the error is cleared by the user. 384 Chapter 3 Solve problems ENWW