HP Color LaserJet Enterprise CP5525 Service Manual - Page 421

Table 3-41 Embedded Jetdirect (continued) First level Second level Third level Fourth level SNMP Test Data Path Test Select All Tests Execution Time Execute Ping Test Dest Type Fifth level Values Yes No* Yes No* Yes No* Range: 1 - 60 hours Default = 1 Yes No* IPv4 IPv6 Description This test checks operation of SNMP communications by accessing predefined SNMP objects on the product. Select Yes to choose this test, or No to not choose it. This test helps to identify data path and corruption problems on an HP postscript level 3 emulation product. It sends a predefined PS file to the product, However, the test is paperless; the file will not print. Select Yes to choose this test, or No to not choose it. Use this item to select all available embedded tests. Select Yes to choose all tests. Select No to select individual tests. Use this item to specify the length of time (in hours) that an embedded test will be run. You can select a value from 1 to 60 hours. If you select zero (1), the test runs indefinitely until an error occurs or the product is turned off. Data gathered from the HTTP, SNMP, and Data Path tests is printed after the tests have completed. No: Do not initiate the selected tests. Yes: Initiate the selected tests. This test is used to check network communications. This test sends link-level packets to a remote network host, then waits for an appropriate response. To run a ping test, set the following items: Specify whether the target product is an IPv4 or IPv6 node. ENWW Tools for troubleshooting 397