HP Color LaserJet Enterprise CP5525 Service Manual - Page 422

Table 3-41 Embedded Jetdirect (continued) First level Second level Third level Fourth level Dest IPv4 Dest IPv6 Packet Size Timeout Count Print Results Execute Ping Results Packets Sent Packets Received Fifth level Values Description Range: 0 - 255 Type the IPv4 address. Default = 127.0.0.1 Select from a provided list. Type the IPv6 address. Default = : : 1 Default = 64 Default = 001 Default = 004 Yes No* Yes No* Default = 00000 Specify the size of each packet, in bytes, to be sent to the remote host. The minimum is 64 (default) and the maximum is 2048. Specify the length of time, in seconds, to wait for a response from the remote host. The default is 1 and the maximum is 100. Specify the number of ping test packets to send for this test. Select a value from 0 to 100. The default is 4. To configure the test to run continuously, select 0. If the ping test was not set for continuous operation, you can choose to print the test results. Select Yes to print results. If you select No, results are not printed. Specify whether to initiate the ping test. Select Yes to initiate the test, or No to not run the test. Use this item to view the ping test status and results using the control panel display. You can select the following items: Default = 00000 Shows the number of packets (0 - 65535) sent to the remote host since the most recent test was initiated or completed. The default is 0. Shows the number of packets (0 - 65535) received from the remote host since the most recent test was initiated or completed. The default is 0. 398 Chapter 3 Solve problems ENWW