HP Color LaserJet Pro M452 Getting Started Guide 1

1

Português

.......

10

Español

.............

7

Français

............

4

English

..............

1

繁体中文

.........

13

4. Select a connection method and prepare for software installation

3. Initial setup on the control panel

Windows

1.

Do not connect the USB cable before installing the software. If the cable

is already connected, disconnect it before continuing. The installation

process prompts to connect the cable at the appropriate time.

2.

Continue with

“5. Locate or download the software installation files.”

NOTE:

During software installation, select the option to

Directly connect

this computer using a USB cable

. (Windows only)

Mac

1.

For Mac, connect the USB cable between the computer and the printer

before installing the software.

2.

Continue with


Built-in wireless network connection

1.

Touch the Connection Information

button.

2.

Touch the

Network Wi-Fi OFF

button.

3.

Touch the

Settings

button.

4.

Touch the

Wireless Setup Wizard

item.

5.

Select the correct network SSID from the list. If you do not see the SSID,

touch

Enter SSID

and provide the network SSID manually.

6.

Use the keyboard to enter the passphrase, and then touch the

OK

button.

7.

Wait while the printer establishes a network connection.

8.

Touch the Connection Information

button. If an IP address is

listed, the network connection has been established. If not, wait a few

more minutes and try again. Note the IP address for use during software

installation.

Example IP address

:

192.168.0.1

9.

To print from a computer, continue with

“5. Locate or download the

software installation files.”

To print from a phone or tablet only, continue

with

“7. Mobile and wireless printing.”

NOTE:


Connect through

a network

. (Windows only)

Manually configure the IP address

See the printer user guide for information on how to manually configure

the IP address. See the

“Troubleshooting”

section of this guide.

Wired (Ethernet) network connection

Use a standard network cable. (Cable not included.)

1.

Connect the network cable to the printer and to the network. Wait a few

minutes for the printer to acquire a network address.

2.

On the control panel, touch the Connection Information

button. If

an IP address is listed, the network connection has been established. If not,

wait a few more minutes and try again. Note the IP address for use during

software installation.

Example IP

address

: 192.168.0.1

To manually configure the IP address, see

“Manually configure the

IP address.”

3.

Continue with


NOTE:


Connect through

a network

. (Windows only)

Color LaserJet Pro M452dw

Getting Started Guide

IMPORTANT:

Follow

Steps 1 - 2

on the

printer hardware setup

poster, and then continue

with

Step 3

.

After turning on the printer, wait for it to initialize. To navigate the control panel, use touch, swipe, and

scroll gestures. Follow the prompts on the control panel to configure these settings:

•

Language

•

Location

•

Default Settings

Under

Default Settings

select one of these options:

•

Self-managed

: Optimized default settings for most users that include guided setup and

configuration steps and automatic updates.

•

IT-managed

: Optimized default settings for fleet manageability.

Settings are fully customizable after initial setup.

NOTE:

Select

Print Information Page

to print a page that instructs how to change the default

settings.

NOTE:

Touch the Help

button on the printer control panel to access help topics.

www.hp.com/support/colorljM452

www.register.hp.com

USB connection directly between the

printer and the computer

Use an A-to-B type USB cable (not included with all models).

HP Color LaserJet Pro M452 Getting Started Guide 1

HP Color LaserJet Pro M452 Manual

HP Color LaserJet Pro M452 manual content summary: