HP Color LaserJet Pro M453-M454 Getting Started Guide

Português

.........

10

繁體中文

...........

13

Español

...............

7

Français

...............

4

English

.................

1

www.hp.com/support/colorljm454

www.register.hp.com

Color LaserJet Pro M454

Getting Started Guide

2

4. Download and install the software

Manually configure the IP address

See the printer user guide for information on how to manually configure the

IP address at

www.hp.com/support/colorljm454

.

IMPORTANT:

Follow

Steps 1 - 2

on the

printer hardware setup

poster, then continue

with

Step 3

.

3. Set up the control panel

After turning on the printer, wait for it to initialize. To navigate the non-touchscreen control panel, use the arrow buttons and the

OK

button. To navigate the touchscreen control panel, use touch, swipe, and scroll gestures. Follow the prompts on the control panel to

configure

Language, Country/Region

, and

Self-managed

or

IT-managed

.

•

Self-managed: Optimized default settings for most users that include guided setup and configuration steps and

automatic updates.

• IT-managed: Optimized default settings for fleet manageability.

Follow additional prompts to complete control panel setup.

Settings are fully customizable after initial setup.

Troubleshooting Tips

Connect the printer to a wireless network (wireless models only)

The installation software might not detect the printer during wireless setup. Follow the steps below to connect the printer to the same wireless network as the computer.

FAQ

For frequently asked questions, go to

www.hp.com/support/colorljM454FAQ

or scan the QR code.

NOTE:

An internet connection is required to set up the printer and download the software driver.

Method 1: Download HP Easy Start (Windows and macOS)

HP Easy Start will detect the printer, assist with selecting the printer connection

type (USB, Wired, or Wireless), and install the software.

1.

From the computer, go to

123.hp.com/laserjet

, and click

Download

.

2.

Run HP Easy Start.

3.

When prompted to select a connection type, select the appropriate option for the

type of connection.

NOTE:

If HP Easy Start does not detect the printer or the software does not install

automatically, go to

Method 2: Manually download from printer support website

(Windows)

.

Method 2: Manually download from printer support website

(Windows)

1.

From the computer, go to

www.hp.com/support/colorljm454

.

2.

Select

Software

and

drivers

.

3.

Download the software for your printer model and operating system.

4.

Launch the software file from the folder where the file was saved.

5.

Follow the onscreen instructions to install the software.

6.

When prompted to select a connection type, select the appropriate option

for the type of connection.

NOTE:

Do not connect the USB cable until you are prompted to do so.

Non-Touchscreen control panels

1.

From your printer, disconnect the Ethernet cable if attached.

2.

Reset Printer Network Settings from Printer Control Panel:

OK

>

Setup

>

Network setup

>

Restore Network Setting

.

The Wireless light begins blinking.

3.

Install the software using

Method 1

or

Method 2

above.

Touchscreen control panels

1.

From the Home screen on the printer control panel, swipe the tab at the top of the

screen downward to open the Dashboard, and then touch the

Wireless

icon.

2.

Touch the

Setup

icon.

3.

Touch

Wireless Settings

.

4.

Touch

Wireless Setup Wizard

.

5.

Follow the display instructions to complete the setup.

6.

Install the software using

Method 1

or

Method 2

above.