HP D2600 HP 2U Rack Rail Kit installation instructions (536846-001, September
HP D2600 Manual
View all HP D2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP D2600 manual content summary:
- HP D2600 | HP 2U Rack Rail Kit installation instructions (536846-001, September - Page 1
Rack Rail Kit installation instructions Overview This document contains instructions for installing HP rack rails into square and round hole racks for HP devices. NOTE: For more information on preparing the device for installation, see the user guide that ships with the device. Kit contents • Two - HP D2600 | HP 2U Rack Rail Kit installation instructions (536846-001, September - Page 2
support the product(s) during the installation process. Use of the appropriate lifting device is recommended as an installation aid. nl 3. Slide the device into position on the rails . WARNING! Do not overload the branch circuit that provides power to the rack. The total rack load should not exceed - HP D2600 | HP 2U Rack Rail Kit installation instructions (536846-001, September - Page 3
NOTE: The rear ends of the rails have a CTO bracket that must engage the device chassis to secure the rear of the chassis to the rails. nl 4. When cabling the device, use holes provided in the rear rack rails, install tie wraps, and route external cable as required. nl Page 3
HP 2U Rack Rail Kit installation
instructions
© Copyright 2009 Hewlett-Packard Development Company, L.P.
First edition: June 2009
The information in this document is subject to change without notice.
Printed in the US
www.hp.com
*536846-001*
Overview
This document contains instructions for installing HP rack rails into square
and round hole racks for HP devices.
NOTE:
For more information on preparing the device for installation,
see the user guide that ships with the device.
Kit contents
•
Two rack rails (left and right)
•
Mounting hardware for square and round hole racks
•
Two tie wraps
NOTE:
If mounting the device into threaded hole or telco racks, please
see
w
w
w
.r
a
c
ks
o
lu
ti
o
ns
.co
m
to purchase mounting hardware.
Important safety information
See the
Important Safety Information
document included with the device.
CAUTION:
Electrostatic discharge (ESD) can damage electronic
components. Be sure you are properly grounded (earthed)
before beginning any installation procedure.
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
nl
Page 1