HP D2D4009fc HP StoreOnce Enterprise Manager User Guide (TC458-96012, December
HP D2D4009fc Manual
View all HP D2D4009fc manuals
Add to My Manuals
Save this manual to your list of manuals |
HP D2D4009fc manual content summary:
- HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 1
HP StoreOnce Enterprise Manager version 1.0.1 User Guide *TC458-96012* HP Part Number: TC458-96012 Published: September 2013 Edition: 2 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 3
of the interface 11 Understanding administrator-level and user-level permissions 12 3 Configuring the HP StoreOnce Enterprise Manager 13 Adding a device...13 Working with orphan service sets 16 Adding new users, administrators, and groups 17 Adding users locally...17 Creating a new group...17 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 4
a user (local authentication mechanism 102 Using group management functions 103 Modifying a group...103 Moving a library or NAS share from one group to another 107 Removing a group...111 Performing device management functions 112 Modifying the polling interval or IP address of an HP StoreOnce - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 5
and disk usage statistics 144 Viewing replication job statistics 146 Viewing the service set summary (Gen3, multi-node 149 Exiting the Command Line Interface 150 Using the Command Line Interface in a batch file 150 A Troubleshooting 151 B Support and other resources 155 Related documentation - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 6
When installing the HP StoreOnce Enterprise Manager, observe the following requirements: • Server-side requirements: ◦ Supported Windows platforms ◦ Standard LAN connectivity (for web browser-based GUI access) ◦ Initial 1 GB disk space for installation. (More space is required as the system expands - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 7
NOTE: This guide makes references to devices as Gen2 and Gen3 devices. Gen2 devices consist of HP StoreOnce 250xx, 41xx, and 43xx devices. Gen3 (single node) devices consist of HP StoreOnce 26xx, 42xx, and 44xx devices. Gen3 (multi-node) devices consist of HP StoreOnce B6000-series devices. Minimum - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 8
Manager To install the HP StoreOnce Enterprise Manager: 1. Obtain the HP StoreOnce Enterprise Manager code by following the process found on the customer letter (Read Me First) in the replication License To Use. 2. Log into Software Depot at http://www.software.hp.com/kiosk to download the software - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 9
HP StoreOnce Enterprise Manager User Guide NOTE: HP StoreOnce systems that are monitored by the HP StoreOnce Enterprise Manager are referred to as devices. Before adding a device to the HP StoreOnce Enterprise Manager, update the device firmware to the most recent version. Upgrading the HP StoreOnce - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 10
of the system on which the software is installed. The http request on port 3095 is redirected to port https 3096. Launch an https instance by using https://x.x.x.x:3096/sems. 2. Select the correct domain name from the drop-down list. The HP StoreOnce Enterprise Manager version 1.0.1 supports both - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 11
HP StoreOnce Enterprise Manager browser is refreshed, the system may disconnect you and require you to log in again. • If you close the browser, the user regions of the interface Throughout this guide, procedures refer to various regions of the HP StoreOnce Enterprise Manager interface. See Figure 1 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 12
and perform all actions in the HP StoreOnce Enterprise Manager. Users with user-level permissions (users) can only view those items the information available in the user view (shown in Figure 2 (page 12)). Figure 2 Regions of the interface, user view This user guide explains all actions that can - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 13
cannot add a device, add new users, or create groups. Adding a device HP StoreOnce systems monitored by the HP StoreOnce Enterprise Manager are referred to as devices. Before adding a device to the HP StoreOnce Enterprise Manager, update the device firmware to the most recent version. Four - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 14
user ID and password as authentication. 4. Select the appropriate polling interval from the Polling Interval field. The polling interval indicates how often the device is surveyed by the HP StoreOnce system is to find the associated target and source devices. If this box is selected, the HP StoreOnce - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 15
Domain Name. NOTE: If you select an option to add a device with its FQDN, then make sure that the /etc/ hosts file in the host system (HP StoreOnce Enterprise Manager) displays the entry for FQDN of the device to be added. If you select an option to get IP addresses from a file, then - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 16
; this displays all the service sets/devices for which the system cannot automatically find the IP address. Enter the IP address of the B6000, 26xx, 42xx, or 44xx series device corresponding to all the listed service set entries, and then click OK. 16 Configuring the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 17
selected. The procedures in this installation and configuration guide are appropriate for the local authentication mechanism. See the HP StoreOnce Enterprise Manager User Guide to switch to LDAP authentication and for instructions for logging in and adding users after using the LDAP authentication - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 18
multiple NAS shares from the Un-Grouped NAS list, and then click Add >. Add all NAS shares by using Add All > instead. 18 Configuring the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 19
-Grouped CatalystStores list, and then click Add >. Add all CatalystStores by using Add All > instead. 11. Click Next. 12. On the Add User screen, select a single or multiple users from the Available Users list, and then click Add >. Add all users by using Add All > instead. Creating a new group 19 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 20
13. Click Next. 14. On the Summary screen, review the information for each tab. 20 Configuring the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 21
15. If applicable, click Back to make any changes to the information for the new group. 16. If the information is correct, click Finish. The Success dialog box appears. Creating a new group 21 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 22
from the Navigation tree. Importing an AD group An administrator can import an AD group into the HP StoreOnce Enterprise Manager. After an AD group is imported, all users of that AD group can log into the HP StoreOnce Enterprise Manager, and see the groups for which they are members. To import an AD - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 23
• Group Description: The description of the group (populates automatically after you select a group) • Contact Number: Phone number of the user 4. Click Next. 5. On the Add Libraries screen, select a single or multiple libraries from the Un-Grouped Libraries list, then click Add >. Add all libraries - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 24
10. Click Next. 11. Review the Summary screen and information displayed on each tab. If the information is correct, click Finish. 24 Configuring the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 25
After the group is imported, all users of this group can log into the HP StoreOnce Enterprise Manager by using their LDAP credentials. Importing an AD group 25 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 26
the ability to monitor the status of the various devices and of the replication process between the devices by way of regular emails. Before users start receiving emailed reports, an SMTP server must be added for the HP StoreOnce Enterprise Manager to start sending emails. Adding an SMTP server for - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 27
window is displayed so you can confirm the deletion before the system removes the SMTP details. Modifying the data retention period Configure the time period for how long to keep the history data in the HP StoreOnce Enterprise Manager database. Select the Administration tab in the Navigation tree - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 28
tab shows the version and build number of the HP StoreOnce Enterprise Manager and the installed version of Flash Player on the client side. without logging into the HP StoreOnce Enterprise Manager. The Report Scheduler is available for the following reports: • Replication Jobs • Data Transferred - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 29
3. Display the report of interest by using the necessary drop-down boxes. (For more information, see the individual report sections.) 4. Click Schedule an email in the upper right corner of the screen. The Report Scheduler window appears. This window provides three options: • Create a New Report - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 30
report is saved to the new Report Scheduler. To add a report to an existing Report Scheduler: 1. From the Report Scheduler window, select a Report Scheduler to update with the new report. 30 Configuring the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 31
report type, the screen contains tabs to separate reports by appliance, service set, library, port, drive, NAS share, and CatalystStore reports. Report Scheduler from the User Configuration screen. Viewing, modifying, or removing a report scheduler 1. Go to User Configuration in the Navigation tree - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 32
by clicking Modify; you can only do that by clicking Schedule an email on the respective report page. • Remove-Deletes the Report Scheduler from the HP StoreOnce Enterprise Manager. You are presented with two confirmation boxes before the Report Scheduler is removed. 32 Configuring the - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 33
replication topology" (page 39) • "Managing removed devices" (page 42) • "Viewing device details " (page 44) • "Viewing messages" (page 73) Viewing a group summary The system administrator can view the Overall Status Summary for all groups recognized by the HP StoreOnce Enterprise Manager. Users - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 34
Filtering devices to appear The HP StoreOnce Enterprise Manager allows users and administrators to filter the devices that appear in the devices group view. Because administrators and users have different permission levels, users can choose only from the groups to which they have access and - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 35
again, click Reset. Launching the device GUI As you monitor multiple devices with the HP StoreOnce Enterprise Manager, it might be necessary to view specific device details. The HP StoreOnce Enterprise Manager provides a way to interact with a device's graphical interface through the Launch Devices - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 36
log back in. You can also manually remove a launched device: 1. best with the Mozilla Firefox web browser application. If you are using Microsoft Internet Explorer, you might have a problem logging out of the HP StoreOnce appear The HP StoreOnce Enterprise Manager allows users and administrators - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 37
OK to save these settings. NOTE: Click Reset Columns to restore the original columns. Firmware notification In the device group view, the Firmware version column shows the firmware version of the managed HP StoreOnce device. This column is optional; it does not display in the device list page by - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 38
default setting and no firmware updates available for any device Device list with the firmware version column selected in the customized view (regardless of whether updates are available for any device): Device list showing firmware version column automatically if a firmware update is available for - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 39
Viewing replication topology The HP StoreOnce Enterprise Manager allows users to view the replication relationships between the devices in a graphical format. In the replication topology view, users can see all the replicating devices that are part of that group. Replication relationships are group- - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 40
the link in the device node to view device details. (The link is not available for those devices that are not part of the current group.) • Visual rearrangement of replication topology graph: Allows you to manipulate the graph on the screen, such as dragging the nodes, dragging the entire graph, and - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 41
1. In the Filter By drop-down box, select whether to filter by device status or replication status. 2. In the Equal To drop-down box, select the value of the status to view. The choices are Critical, Warning, Unknown, Information, and Good. 3. - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 42
layout you prefer, save that layout for repeated use in the replication topology viewer. Click Save Layout to save the current layout of saved layout is specific to your login; it will not be visible to other users in the same group or a different group. Managing removed devices Any devices that - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 43
the content pane. 2. To restore one or more devices: a. Select the box for each device to be restored. b. Click Restore, and follow the instructions. A warning dialog box appears. c. Click Yes to continue. Another warning dialog box appears. d. Click Yes to restore the device. The restored device is - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 44
" (page 69) • "Viewing storage information" (page 70) • "Viewing support ticket information" (page 71) At any time, from the All Devices screen and Gen3 single node systems, the screen defaults to the Current Issues tab. On Gen3 multi-node systems, you must first select a service set to access the - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 45
Gen3 multi-node: Viewing device details 45 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 46
More Details (on a Gen3 multi-node system, click the preferred service set after clicking More Details) See "Accessing the Current Issues screen " (page 44). Gen2 and Gen3 single node systems and VSA devices On Gen2 and Gen3 single node systems and HP StoreOnce VSA devices, the Current Issues tab - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 47
the selected service set. It also includes a pie chart of service set statistics showing the space used by the service sets and the remaining space; the remaining space includes the couplet free space and the StoreOnce bookkeeping data. This screen updates automatically. All systems Viewing device - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 48
Devices of the Navigation tree on the left pane of the HP StoreOnce Enterprise Manager. NOTE: If necessary, disable pop-up blockers on email alerts for each device (Gen2 and Gen3 single node systems) or node (Gen3 multi-node systems). If the used space for the configured device or node reaches - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 49
, select Configure Threshold Alerts on the Current Issues tab. On a Gen3 multi-node system, select Configure Threshold Alerts on the initial device details screen. Gen2 and Gen3 single node systems Gen3 multi-node systems: 2. On a Gen3 multi-node device, click Select Node(s) to determine which nodes - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 50
3. Use the slider bar to set the minimum threshold from 95 to 45 (percent) in increments of 10. The email alerts begin at the minimum threshold and continue at each threshold level. For example, if you set the threshold to 65, the email alerts are sent out after the disk used space reaches 65, 75, - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 51
the table heading row to select all email alerts at once. Adding ESXi information Administrators can add the information for an ESXi server on an HP StoreOnce VSA device. Viewing device details 51 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 52
if the information has not already been entered. Viewing virtual libraries Users and administrators can view details of the devices to which they Replication tab. • On a Gen3 multi-node device, select a service set, and then click the Virtual Library Replication tab. The Virtual Library Replication - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 53
device and library name, library status, replication status, and details are listed for each virtual library on the device. The service set name is applicable only for Gen3 multi-node devices. Hovering the mouse over the first column indicates that the service set name is applicable only for those - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 54
is a library, and the edges indicate the replication link between the libraries. This example shows a replication between two libraries. NOTE: View Replication Topology is only enabled after View All is selected for the View By field. The topology view is not available for filtered views of virtual - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 55
type of libraries to view (all, source, target, or non-replicating) in the View by field. The screen refreshes to display only To export the library information: a. Click Export. b. In the Select location for download [file name] dialog box, navigate to the appropriate folder in which to save the - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 56
usage Users and administrators can view details of the virtual library to which they have access. To do so: 1. Navigate to the Current Issues tab (see "Accessing the Current Issues screen " (page 44)). 2. On a Gen2 or Gen3 single node system, click Virtual Library Status. The library and replication - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 57
system, click a service set link, and then click Virtual Library Status. The library and replication service set but in a different group, and StoreOnce bookkeeping data), and free space. • Couplet Disk Usage-The space used by each node, couplet free space, deduplication ratio, and amount of user - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 58
Issues tab (see "Accessing the Current Issues screen " (page 44)). 2. Do one of the following: • On Gen2 or Gen3 single node devices, click the NAS Replication tab. • On Gen3 multi-node devices, select a service set, and then click the NAS - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 59
The device name, service set and share name, share status, replication status, and details are listed for each NAS share on the device. Viewing device details 59 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 60
devices. Hovering the mouse over the first column will indicate that service set name is applicable only for those devices. 3. To sort that every element in the graph represents a share instead of a device. View Replication Topology is only enabled after View All is selected for the View By field. - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 61
type of shares to view (all, source, target, or non-replicating) in the View by field. The screen refreshes to display only 6. To export the share information: a. Click Export. b. In the Select location for download [file name] dialog box, navigate to the appropriate folder in which to save the file - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 62
; virtual libraries; and disk space occupied by NAS present in a different group; and HP StoreOnce bookkeeping data), and free space. • Device Disk Usage-The used space, free space, deduplication ratio, and amount of user data stored on the selected device. The table to the right of the graphs lists - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 63
3. On a Gen3 multi-node system, click a service set link, and then click NAS Status. The library and replication status are displayed in a table. In addition, there are two graphs: • NAS Disk Usage-The used space (includes disk space occupied by NAS in the current service set and current group), - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 64
64 Managing devices - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 65
Current Issues tab (see "Accessing the Current Issues screen " (page 44)). 2. Do one of the following: • On HP StoreOnce VSA and Gen3 single node devices, click the CatalystStore tab. • On Gen3 multi-node devices, select a service set, and then click the CatalystStore tab. Viewing device details 65 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 66
service set, and CatalystStore name; CatalystStore status; accessibility; and number of CatalystStore items are listed for each CatalystStore on the device. 3. To export the CatalystStores information: a. Click Export. b. In the Select location for download to the HP StoreOnce Enterprise Manager, - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 67
Enter the access key in one of the following ways: • Click Accessible for the relevant CatalystStore, and enter the access key directly. • If the same access key needs to be applied to a number of CatalystStores, select all the relevant CatalystStores, enter the access key in the text box, and click - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 68
Viewing CatalystStore disk usage Users and administrators can view details of the CatalystStores to which they have access. To do so: 1. Navigate to the Current Issues tab (see "Accessing the Current Issues screen " (page 44)). 2. On HP StoreOnce VSA and Gen3 single node devices, click CatalystStore - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 69
the CatalystStores in the current service set and current group along with the physical disk space used, the user data stored, and the deduplication ratio. Viewing license information On an HP StoreOnce VSA device, administrators can view details of the installed license. NOTE: Only administrators - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 70
the on-screen instructions to generate the license key. 3. Save the license file to the system on which the HP StoreOnce Enterprise Manager is installed. 4. From the License tab, click Install License.... 5. Click the ... button to browse to the location of the downloaded license file. 6. Click - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 71
is reflected after the table updates. The Status will also system will report that another user is already adding storage. Viewing support ticket information On an HP StoreOnce VSA device, users and administrators can view and generate support tickets. Several tickets can be added; however, support - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 72
characters (i.e., A-Z, a-z, 0-9) and underscores (_). 4. Click Ok. The support ticket is downloaded onto the HP StoreOnce VSA device. 5. To download a support ticket into the HP StoreOnce Enterprise Manager, select it and click Download to SEM. You can only download them one at a time. 72 Managing - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 73
Ticket screen. Saving a support ticket locally After a support ticket has been downloaded into the HP StoreOnce Enterprise Manager, save it locally (i.e., it is saved to the local drive of the machine whose browser the user is accessing to open the HP StoreOnce Enterprise Manager; not necessarily - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 74
1. Select Messages in the Navigation tree. The screen displays the managed, un-managed, library, NAS share and Catalyst details. 2. Select specific messages, or check the box in the header row to select all of the messages. 3. Click Acknowledge. 4. Click OK in the two confirmation dialog boxes. A - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 75
Enterprise Manager version 1.0.1supports report and trending for the history data. The HP StoreOnce Enterprise Manager shows a dashboard of overall appliance status, library status, NAS share status, replication jobs, replication duration and size, object store status, forecast, disk usage, and disk - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 76
historical report does not consider whether the HP StoreOnce Enterprise Manager was able to connect to an HP StoreOnce device. Viewing the Replication report Viewing replication jobs Select the Replication tab, and then select the Jobs tab to see replication jobs. To view the details of a particular - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 77
data change • For Next-The time period of the forecast • Replication Window-The time in which you want the replication to occur • Current Replication Link Speed-The current link speed available for the StoreOnce device. • New Replication Link Speed (optional)-A new link speed that could be available - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 78
Viewing the Slot Mapping Activity report 1. Select the Replication tab. 2. Select the SlotMapping Activity tab. 3. Use the drop-down boxes to select the appropriate group, device, service set, and library/NAS shares. 4. Use the For Last drop-down box to select the time period. 78 Accessing and - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 79
week, all slot mappings retrieved daily for the selected week are displayed. By default, the following fields are displayed: • Date • Slot Mapping Name • Replication Status • Out of Sync Warning Threshold • Number of Mapped Slots Out of Sync • Number of Mapped Slots Out of Sync Warning • Out of Sync - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 80
results into a .csv formatted file by clicking Export to CSV. Use the Filter By drop-down menu to filter report results by column or by replication status names. Select Any Column, and enter a column title (for example, Date, Slot Mapping Name, Out of Sync Warning Threshold, Number of Mapped Slots - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 81
cannot be removed from the displayed results. Viewing the Cartridge Activity report 1. Select the Replication tab. 2. Select the Cartridge Activity tab. 3. Use the drop-down boxes to select the appropriate group, device, service set, and library. 4. Use the For Last drop-down box to select the time - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 82
a. Select Any column, bar code, or job status from the Filter by drop-down list. b. Enter the appropriate value in the search box. c. Click Filter. The content pane displays only the data meeting the filter criteria. d. Click Reset to clear the filter. 7. Use Customize View to view allowable columns - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 83
default. 3. Use the drop-down boxes to select the appropriate group, device, service set, stores, type, and time period to display the report. On HP StoreOnce VSA and Gen3 single node devices, after a device is selected, the Service Set drop-down box is disabled, and stores are listed. Select stores - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 84
tab. 4. Use the drop-down boxes to select the appropriate group, device, service set, stores, type, and time period to see the report. On HP StoreOnce VSA and Gen3 single node devices, after a device is selected, the Service Set drop-down box is disabled, and stores will be listed. Select stores - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 85
for time periods less than two months. • The date is refreshed automatically with live data for a time period of last 1 hour. Viewing the Service Set Performance report 1. Select Reports in the Navigation tree. 2. Select the Performance tab. 3. Use the drop-down boxes to select the appropriate group - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 86
Report At drop-down box to select the library level. 5. Click Select ServiceSet to see a list of available service sets. 6. Select a service set. 7. Click OK to close the Available Service Set list. Select Interface is now enabled. 8. Click Select Interface to see a list of available libraries. 86 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 87
group and device. 4. Use the Report At drop-down box to select the port level. 5. Click Select ServiceSet to see a list of available service sets. 6. Select a service set. 7. Click OK to close the Available Service Set list. Select Interface is now enabled. Viewing the Performance report 87 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 88
group and device. 4. Use the Report At drop-down box to select the drive level. 5. Click Select ServiceSet to see a list of available service sets. 6. Select a service set. 7. Click OK to close the Available Service Set list. Select Interface is now enabled. 88 Accessing and viewing reports - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 89
8. Click Select Interface to see a list of available libraries. To filter the libraries, enter text into the Available Libraries text box, and click Search. Click Clear to clear the filter. 9. Select a library. 10. Click OK to close the Available Library list. Select Drive is now enabled. 11. Click - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 90
At drop-down box to select the NAS share level. 5. Click Select ServiceSet to see a list of available service sets. 6. Select a service set. 7. Click OK to close the Available Service Set list. Select Interface is now enabled. 8. Click Select Interface to see a list of available NAS shares. To - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 91
to see a list of available service sets. 6. Select a service set. 7. Click OK to close the Available Service Set list. Select Interface is now Throughput or Write Throughput. 13. Use the drop-down boxes to select either User Data or Actual Data. 14. Set the time period to display using the View - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 92
Viewing the Storage report Viewing disk usage To display the physical disk usage and user data stored: 1. Select the Storage tab. 2. Select the Disk Usage tab. and device • Gen3 multi-node will display library, NAS share, service set, CatalystStore, couplet, and node • Gen3 single node will display - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 93
set, CatalystStore, and couplet • Gen3 single node will display library, NAS share, CatalystStore, and device c. The specific couplet, service set, library, NAS share, or CatalystStore (based on the selection in the Type drop-down box) d. From Last (time period) Viewing forecasting of disk space - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 94
-node system, capacity denotes the couplet capacity. • Time to reach Threshold (95% of Capacity) This denotes the time that will take to reach the threshold limit. NOTE: The threshold limit is 95% of capacity. Viewing the Alerts Summary report Viewing the Alert Summary report The replication and - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 95
, in the Alerts Summary tab and you have administrative privileges, create a user and allow 24 hours to see results on the Alerts Summary tab. Configuring you can configure the Alerts Summary to send emails that provide the replication status and the copy job (inbound and outbound) status for the - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 96
5. In the wizard, click Next> to begin. 6. Select Groups from the Available Groups list (or click Add All). 7. Click Add. (You can remove groups by using Remove or Remove All.) 8. Click Next>. 9. Select Events for the configuration. 96 Accessing and viewing reports - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 97
recipients will get an email at 1 AM. • Weekly ◦ Recipients receive weekly emails on the selected day and time. ◦ You can select a Start From date; the system begins sending emails on that date (or the first selected day of the week after that date). ◦ Example: Select 12 AM, Sunday, and Start From - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 98
receive yearly emails on the selected date and time. ◦ You can select a month to receive the yearly email. ◦ You can select a Start From date; the system begins sending emails on that date (or the selected day of the year after that date). ◦ Example: Select 12 AM, date 25, January, and Start - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 99
16. Click Next>. 17. Review the information on the Summary screen. 18. Click Preview if you want to see a preview of an alerts email before confirming the configuration. Click OK to exit the preview. Click Send Mail if you want to send a sample email before confirming the configuration. Click OK in - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 100
the authentication information. • LDAP (Lightweight Directory Access Protocol) authentication-The HP StoreOnce Enterprise Manager uses the information stored in the LDAP to authenticate users. The HP StoreOnce Enterprise Manager supports both Authentication types simultaneously; there is no need to - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 101
and groups" (page 17) as part of "Configuring the HP StoreOnce Enterprise Manager" (page 13). Removing a user or administrator Administrators can remove a user or another administrator using either the Active Users tab or the Deactivated Users tab. Removing a user from the Active Users tab To remove - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 102
A success dialog box appears. The selected user is removed from the list of users. Deactivating a user The administrator can deactivate and reactivate users. A deactivated user cannot log into the HP StoreOnce Enterprise Manager. To deactivate a user: 1. From the Navigation tree under Administration - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 103
a set of users to a group that provides monitoring access for the group. After a new device is added to the HP StoreOnce Enterprise Manager, it is added to the Un-Grouped group. Any library or NAS share can only be part of one group at any time. Because the group works as a collection of libraries - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 104
5. Click Next. 6. On the Add Libraries screen, libraries can be added from Un-Grouped libraries. Libraries from existing groups can be moved back to Un-Grouped libraries. a. Click on the names of libraries in the Un-Grouped libraries that are to be added to the group. To select several at a time, - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 105
a. Click on the name of the NAS share in the Un-Grouped NAS table to be added to the group. To select several at a time, hold down the Ctrl key, and click each NAS share to be added. The NAS shares are then highlighted in the table. b. Click Add between the two tables in the wizard. This action - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 106
table. b. Click Add between the two tables in the wizard. This action moves the highlighted users from the Available Users table to the Selected Users table. NOTE: Only users with the role of User are listed because users with the role of administrator always have access to all groups. To add all - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 107
Group Management screen. Moving a library or NAS share from one group to another The administrator can move libraries and NAS shares between user managed groups: 1. From the Navigation tree under Administration, click Group Management. 2. Select the group containing the library or NAS share to be - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 108
4. In the wizard, click Next to begin. 5. On the Move Libraries screen, select the libraries to move. a. Click on the names of libraries in the Select Libraries table to be removed from the group and added to another group. To select several at a time, hold down the Ctrl key, and click each library - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 109
7. On the Move NAS screen, select the NAS shares to move. a. Click on the names of the NAS shares in the Select NAS table to be removed from this group and moved to another group. To select several at a time, hold down the Ctrl key, and click each NAS to be moved. The NAS shares are then highlighted - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 110
12. Click Next. 13. On the Summary screen, review the information on each tab for correctness. 110 Performing administration procedures - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 111
. Removing a group Administrators can remove a group from the HP StoreOnce Enterprise Manager. All NAS shares and libraries associated with that group are moved to the Un-Grouped group, and any user associated - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 112
in the correct information. If you are modifying the polling interval or IP address of an HP StoreOnce B6000-series device, you must enter the user ID and password as authentication. 6. Click Apply. The updated polling interval appears in the Polling Interval (in minutes) column for that device. 112 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 113
, restored, or permanently removed. See "Managing removed devices" (page 42). Deploying HP StoreOnce VSA Introduction The following instructions provide the recommended deployment method because it guides the user through the deployment steps and incorporates a number of checks and processes that - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 114
IP address or hostname of the vCenter. • The login credentials for a user with administration rights on the ESXi server (or vCenter, if appropriate) ) Password • The name of the StoreOnceVSA_OVF file • The name of the HP StoreOnce VSA • If static IP addressing is required, you will also need: ◦ - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 115
3. Click Next> to display the ESXi Details (vCenter ) page. Performing device management functions 115 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 116
Next>. Details of the ESXi server and its available datastores are displayed. At this stage, you are selecting the datastore for the HP StoreOnce VSA system files (not the data storage). This datastore requires a minimum of 50 GB capacity. (The virtual disk created will be thin provisioned with - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 117
6. Click Next>. Select a datastore for the User Data Disk. The datastore can be VMFS or NFS: • The virtual disk created from a VMFS datastore will be and not by VMware. However, you should ensure that the maximum file size of 1 TB is supported for NFS. Performing device management functions 117 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 118
VSA is deployed, but the device is not added into the HP StoreOnce Enterprise Manager. Use the Add function on the Device Management page in the HP StoreOnce Enterprise Manager to explicitly add the HP StoreOnce VSA into the HP StoreOnce Enterprise Manager. 8. Click Next>. Check the details on the - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 119
are displayed. If required, you may choose to run deployment in the background. Click Cancel to exit the deployment process, if required. 10. After the HP StoreOnce VSA is configured, the following screen is displayed. Performing device management functions 119 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 120
chapter, but after power-on the vSphere client method requires you to apply the storage manually by using HP StoreOnce CLI prepare storage and add storage commands. IMPORTANT: The HP StoreOnce VSA supports up to 10 x 1 TB vDisks. If you increase storage and notice a reduction in performance, you - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 121
- All Devices page. This displays the Status page for the HP StoreOnce VSA. After you use the HP StoreOnce VSA GUI to create backup target devices, such as Catalyst Stores, VTL libraries and NAS shares, summary status information is updated on this page. 2. Note the ESXi Information section. If the - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 122
3. Select the Storage tab. 4. For VMFS datastores, you will only be able to select a datastore that has 1 TB of free space or more and a corresponding maximum file size of 1 TB or greater. Datastores that do not meet this criterion are disabled. In the example shown, there is only one available - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 123
Serial Number field in the Administration - Devices page, and make a copy of the details. Follow the instructions in the HP StoreOnce VSA Deployment and Configuration Guide to obtain an LTU for the HP StoreOnce VSA, and save it as a text file. 2. After you have obtained a unique license, click Name - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 124
3. Click on Install License.... 4. Browse to the file that contains the LTU string, and click OK. 5. The license is applied, and licensing details on the Status page are updated to show that the license has been applied. 124 Performing administration procedures - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 125
1. In the Navigation tree, click User Configuration. The User Details fields appear in the content pane, with the user name pre-populated. 2. To change the full name, highlight the current full name in the Full Name field, then type in the appropriate value. 3. To update an email address, click in - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 126
view the history log for all devices to which the user has access. The administrator can view the history log for all devices. To do so, use the following procedure. 1. On the Navigation tree, click History - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 127
. The Select Location for Download [filename] dialog box appears. c. Navigate to the folder in which to save the log. d. If appropriate, change the default file name. e. Click Save. An export success dialog box appears. f. Click OK to return to the History Log. 5. Users with administrator-level - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 128
server on which the HP StoreOnce Enterprise Manager is installed. To back up the information on the HP StoreOnce Enterprise Manager database: 1. On the host server, click Start. 2. Select All Programs→Hewlett-Packard→HP StoreOnce Enterprise Manager→Backup StoreOnce Enterprise Manager Database. The - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 129
the current installation completely, perform a fresh installation of the HP StoreOnce Enterprise Manager, and then use this restore utility to restore the backup. This utility imports and updates all the data to the current system. To restore backup information to the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 130
5. The backup copy of the database information is restored to the HP StoreOnce Enterprise Manager. NOTE: This procedure can be used to duplicate the HP StoreOnce Enterprise Manager system onto another server. Another license must be purchased for the new copy of the database. The existing license - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 131
StoreOnce Enterprise Manager version 1.0.1 does not currently provide support for viewing the summary/status of CatalystStores through the CLI. Users can access the HP StoreOnce that port. To change the port used by the CLI: 1. Update the server port defined in the CLI client configuration file that - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 132
Id in the following format: domain name / user id Using Help for the Command Line Interface client To view the details about how to use the CLI Client, choose one of the following options: • To view help content without logging into the HP StoreOnce Enterprise Manager, open a command prompt, and - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 133
Listing existing commands 1. At the command prompt, enter the following command: help The CLI client displays the existing command list. The following commands are available: • show groupsummary • show groups • show devicelist • show criticaldevices • show servicesetsummary • show devicesummary • - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 134
group details At the command prompt, enter the following command: show groups The client displays your group details. 134 Using Command Line Interface for the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 135
Viewing device details 1. Enter the following command: show devicelist The client displays the groups that you own. 2. To view the device list, enter the appropriate group number or group name. The client displays the list of devices and information for the selected group. Viewing device details 135 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 136
device in the selected group: • Current status of the device • Status of the service sets (B6000-series and above) • Status of any virtual libraries on the device • ratio • Amount of stored user data Gen2 and Gen3, single node 136 Using Command Line Interface for the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 137
Gen3, multi-node Viewing the device summary 137 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 138
number> For example: show devicesummary -g Un-Grouped -a CZJ0420GZB Gen3, multi-node For example: show devicesummary -g Un-Grouped -a hpb499bac0d9a2 138 Using Command Line Interface for the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 139
Viewing libraries The screen shots are for Gen2 devices unless stated otherwise. 1. At the command prompt, enter the following command: show libraries The client displays the groups that you own. 2. Enter the appropriate group number or group name of the device. The client displays the list of - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 140
displays the following information for the selected service set: • Status of the library • Replication Status of the library • Replication type • Details of the library status Un-Grouped -a hpb499bac0d9a2 -s hpb499bac0d9a202 140 Using Command Line Interface for the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 141
to a file, use the command -o as follows (B6000-series and above): show libraries -g -a -s -o For example: show libraries -g Un-Grouped -a hpb499bac0d9a2 -s hpb499bac0d9a202 -o C:\LibraryList.txt Viewing NAS shares - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 142
share • Replication type • Details of the NAS share status 5. You can specify the group name and device serial number with the show nasshares command in the following format: show nasshares -g -a For example: 142 Using Command Line Interface for the HP StoreOnce - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 143
to a file, use the command -o as follows (B6000-series and above): show nasshares -g -a -s -o For example: show nasshares -g Un-Grouped -a hpb499bac0d9a2 -s hpb499bac0d9a202 -o C:\LibraryList.txt Viewing a list of - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 144
, or service set that you manage. The client displays the time periods for the statistics. 5. Enter the time period from the list of available periods. The client displays the deduplication and disk usage statistics for the selected component. 144 Using Command Line Interface for the HP StoreOnce - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 145
6. You can specify the device serial number with the show dedupstats command in the following format: show dedupstats -g -a -l For example: show dedupstats -g group1 -a CR201050FD -l Library1_REMOTE Viewing deduplication and disk usage statistics - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 146
Un-Grouped -a hpb499bac0d9a2 -s hpb499bac0d9a201 -t EVERYTHING for a Gen3, multi-node device. Viewing replication job statistics The screen shots are for Gen2 devices unless stated otherwise. 1. At the types for the device. 146 Using Command Line Interface for the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 147
4. Enter the service set number for which you want to view replication job statistics (Gen3, multi-node devices). The client shows three options: • Libraries • NAS Shares • All 5. Enter the component type from the list. If the selected - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 148
: show repjobstats -g Un-Grouped -a CR2061E862 -l "Library 2" -t last_24_hours Gen3, multi-node show repjobstats -g -a -s -l -t For example: 148 Using Command Line Interface for the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 149
summary for the device shows the following information: • Status of the service set • Status of the libraries in the service set • Status of the NAS shares in the service set • Replication status of the libraries • Replication status of the NAS shares 5. You can provide additional options with the - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 150
show servicesetsummary -g -a -s -o For example: show background. The CLI batch commands can be used for automatically-generated reports as part of other batch files, scheduler programs, and so forth. Use the batch - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 151
Troubleshooting The HP StoreOnce The log file is located at log\ RMS_ServiceLog.log. Contact HP Support for help. Table 1 Common issues Symptom Unable to log in. is not available-HP StoreOnce Enterprise Manager cannot connect to a server that has already been added to the system. The server status - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 152
on which the HP StoreOnce Enterprise Manager is installed. The installation fails with the error, The installation file is corrupt. Error reading setup initialization file. A fatal error occurs upon logging in. There is a system issue. Validate the checksum of the downloaded install package to - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 153
Completely uninstall the HP StoreOnce Enterprise Manager. 2. Perform a new installation of the HP StoreOnce Enterprise Manager. 3. Use the Restore utility (see Restoring the Replication Manager database), and choose the most recent backup. The HP StoreOnce Enterprise Manager service does not start - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 154
GUI, and then complete the expansion process again. The HP StoreOnce VSA deployment The network is congested (i.e., Restart HP StoreOnce Enterprise Management is delayed for an extensive amount ESX overload). services. of time. Another user is currently adding for this device" during Storage - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 155
related information: • HP StoreOnce Enterprise Manager Installation Guide You can find these documents from the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals In the Storage section, click Disk Storage Systems, then Disk-to-Disk Backup, and then select - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 156
To make comments and suggestions about product documentation, please send a message to [email protected]. All submissions become the property of HP. 156 Support and other resources - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 157
HP StoreOnce B6000, 26xx, 42xx, and 44xx series devices. A group consists of HP StoreOnce Replication devices (target, source, and non-replicating) that are added to the HP StoreOnce this user guide. A system on which many tapes are stored for easy retrieval. For the HP StoreOnce Enterprise Manager - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 158
103 User Management, 101, 102 administrator adding, 17 alerts emails configuring, 95 authentication mechanisms, 100 B backup, 128 , 133 NAS shares, 141 replication job statistics, 146 configuring 158 Index alerts emails, 95 configuring the HP StoreOnce Enterprise Manager, 13 contact information - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 159
HP technical support, 155 HP StoreOnce Enterprise Manager build number, 28 HP StoreOnce Enterprise Manager version, 28 HP StoreOnce VSA device changing storage allocation, 71 generating support ticket, 72 installing license, 70 saving support details, 58 O orphan service set, 16 Overall Status Summary, 33 - HP D2D4009fc | HP StoreOnce Enterprise Manager User Guide (TC458-96012, December - Page 160
changing, 71 Subscriber's Choice, HP, 155 support ticket generating, 72 saving locally, 73 support tickets viewing, 71 T technical support HP, 155 service locator website, 155 trending viewing, 75 troubleshoot, 151 U Un-Grouped, 112 160 Index upgrading, 9 user add contact information, 125 add
HP StoreOnce Enterprise Manager version
1.0.1 User Guide
*TC458-96012*
HP Part Number: TC458-96012
Published: September 2013
Edition: 2