HP D6000 HP D6000 Disk Enclosure Direct Connect Cabling Guide
HP D6000 Manual
View all HP D6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP D6000 manual content summary:
- HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 1
HP D6000 Disk Enclosure Direct Connect Cabling Guide Abstract This document provides cabling examples for when an HP D6000 Disk Enclosure is connected directly to a server. Part Number: 682251-001 September 2012 Edition: 1 - HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 3
D6000 overview ...4 Cabling overview ...4 Cabling guidelines ...4 D6000 I/O modules and SAS ports ...5 Cabling ...6 Connecting a D6000 in a single-domain environment to one server 6 Connecting a D6000 in a dual-domain environment to two servers 7 Connecting a D6000 in a dual domain environment - HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 4
D6000 I/O module in each storage drawer. • Dual-domain ready: Two I/O modules are installed in each D6000 storage drawer. For information about the available, standard-shipping D6000 configurations, including information about the pre-installed hard drive models, see the D6000 QuickSpecs on the HP - HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 5
The following illustration shows D6000 I/O modules and SAS ports. Item 1 2 3 4 5 6 Description Primary I/O module (Drawer 2) Primary I/O module (Drawer 1) Secondary I/O module or I/O blank (Drawer 2) Secondary I/O module or I/O blank (Drawer 1) SAS port 1 connector SAS port 2 connector Before you - HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 6
• One cable from the D6000 storage drawer to the server provides single-domain connectivity. For dual-domain support, an additional 6G, D6000 I/O module must be installed in the storage drawer and cabled to the same server. • The cable is connected to the D6000 primary I/O module, SAS port 1. • For - HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 7
2-port controller is installed in each server. Note the following: • Two cables from the D6000 storage drawer to the server provide dual-domain connectivity: o One cable connects to the D6000 primary I/O module, SAS port 1. o One cable connects to the D6000 secondary I/O module, SAS port 1. o For - HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 8
, a 4-port controller is installed in the server. Note the following: • Two cables from the D6000 storage drawer to the server provide dual-domain connectivity: o One cable connects to the D6000 primary I/O module, SAS port 1. o One cable connects to the D6000 secondary I/O module, SAS port 1. o For - HP D6000 | HP D6000 Disk Enclosure Direct Connect Cabling Guide - Page 9
documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback (mailto:[email protected]). Include the document title and part number, version number, or the URL when submitting your feedback. Documentation feedback 9
HP D6000 Disk Enclosure
Direct Connect Cabling Guide
Abstract
This document provides cabling examples for when an HP D6000 Disk Enclosure is connected directly to a server.
Part Number: 682251-001
September 2012
Edition: 1