HP DL360 HP SATA DVD-ROM Optical Drive Installation Instructions for HP ProLia
HP DL360 - ProLiant - G3 Manual
 |
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP DL360 manual content summary:
- HP DL360 | HP SATA DVD-ROM Optical Drive Installation Instructions for HP ProLia - Page 1
. 10. Reconnect all peripheral devices to the server. 11. Connect the power cord to the server, and then connect it to a properly grounded electrical outlet. 12. Power up the server. For detailed instructions on installing the drive, see the server-specific user documentation provided with your
-
1
 |
 |
HP SATA DVD-ROM
Optical Drive
Installation Instructions
for HP ProLiant DL servers
Overview
The HP SATA DVD-ROM optical drive provides optical media read capability
for HP ProLiant DL servers. The SATA DVD-ROM drive has a SATA interface
and can read both CD and DVD media. More information about this product,
as well as the latest drivers and flash ROM images, are available from the HP
website (http://www.hp.com
).
Although the SATA DVD-ROM drive reads audio and video discs, the primary
purpose of the drive is data storage.
Features
The SATA DVD-ROM drive includes the following features:
•
Has SATA interface
•
Reads CD and DVD media
Installing the drive
CAUTION:
To prevent damage to electrical components,
properly ground the server before beginning any installation
procedure. Improper grounding can cause electrostatic discharge.
To install the SATA DVD-ROM drive:
1.
Shut down the operating system as outlined in the operation system
instructions.
2.
Power down the server.
3.
Power down all peripheral devices.
4.
Remove the power cord from the outlet, and then remove it from the
server and all peripheral devices.
5.
Remove components that prevent access to the removable-media drive
bays.
6.
Position the drive in the drive bay, and then slide the drive into the
server. If needed, secure with the appropriate fasteners.
7.
Connect the SATA data cable to the server and to the data connector
on the rear of the drive.
8.
Connect the power connector to the server power. If required, use the
supplied power conversion cable.
9.
Reinstall all components removed from the server during the installation
procedure.
10.
Reconnect all peripheral devices to the server.
11.
Connect the power cord to the server, and then connect it to a properly
grounded electrical outlet.
12.
Power up the server.
For detailed instructions on installing the drive, see the server-specific user
documentation provided with your server.
© Copyright 2007, 2008 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only
warranties for HP products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should
be construed as constituting an additional warranty. HP shall not be liable for
technical or editorial errors or omissions contained herein. Bluetooth is a
trademark owned by its proprietor and used by Hewlett-Packard Company
under license.
Part Number 453281-002
April 2008 (Second Edition)