HP DL785 Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers
HP DL785 - ProLiant - G5 Manual
UPC - 883585262809
View all HP DL785 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP DL785 manual content summary:
- HP DL785 | Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers - Page 1
HP ProLiant DL-Series Carrier-Grade Servers Read Before Install HP Part Number: AH410-9002A Published: November 2008 Edition: 1 - HP DL785 | Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers - Page 2
or editorial errors or omissions contained herein. NEBS™ is a trademark of Telecordia Technologies Incorporated. Audience assumptions This document is for the person who installs, administers, and troubleshoots servers and storage systems. HP assumes you are qualified in the servicing of computer - HP DL785 | Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers - Page 3
installing HP ProLiant DL-Series Carrier-Grade Servers. NEBS Chassis Ground This Type 4 ports as described in GR-1089-CORE, Issue 4) and require isolation from the exposed OSP cabling. Power Supply and Cables to the Breaker Panel DL-Series carrier-grade servers are provided with two power supplies - HP DL785 | Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers - Page 4
DC Power Cable Connections Cable Blue Wire Black Wire Green / Yellow Stripe -48V connection Return Rack ground bus bar Connection The breaker panel connections are displayed in the following diagram. 4 Installation Guidelines - HP DL785 | Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers - Page 5
routed the power and data cables through the CMA. To install the retainer bracket, follow these steps: 1. Pull the CMA away from the chassis. 2. Install to the inner hole pattern of the cabinet right rail, just above the server rails. The cabinet right rail fits inside the open-hem bend of the - HP DL785 | Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers - Page 6
e. Install and lightly tighten the two M5 screws into the mounting bracket. You will properly torque these screws at a later point. NOTE: The mounting bracket needs to be torqued tight at a certain angle to hold its retainer bracket flush with the CMA. That is why you first install the retainer - HP DL785 | Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers - Page 7
of the cabinet, damaging itself and other components in the rear of the cabinet. NOTE: Due to the sag of the CMA from the cable weight, there might be a gap between the CMA and the retainer bracket. To close the gap, press the retainer bracket down onto the CMA. 4. Unscrew the - HP DL785 | Read Before Install - HP ProLiant DL-Series Carrier-Grade Servers - Page 8
*AH410-9002A* Printed in the US
HP ProLiant DL-Series Carrier-Grade Servers
Read Before Install
HP Part Number: AH410-9002A
Published: November 2008
Edition: 1