HP DL785 SAS SFF 8-bay Drive Cage Installation Instructions, Second Edition -
HP DL785 - ProLiant - G5 Manual
UPC - 883585262809
View all HP DL785 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP DL785 manual content summary:
- HP DL785 | SAS SFF 8-bay Drive Cage Installation Instructions, Second Edition - - Page 1
SAS SFF 8-bay Drive Cage Installation Instructions for HP ProLiant DL785 Generation 5 Servers Overview This document provides the procedure for installing the optional SAS Small Form Factor (SFF) 8-bay Drive Cage. Kit contents • SAS backplane • Power cord • Data Cables (two bundled) • Drive cage - HP DL785 | SAS SFF 8-bay Drive Cage Installation Instructions, Second Edition - - Page 2
provided with the controller for installation instructions. 7. Slide the plastic retainer to the front of the server. 8. Install the hard drive backplane. 9. Route and connect the data cables from the backplane to the optional controller. 10. Route and connect the power cord. a. Lift the data cables - HP DL785 | SAS SFF 8-bay Drive Cage Installation Instructions, Second Edition - - Page 3
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Part NumberAH267-9002B May 2008 (First Edition) *AH267-9002B - HP DL785 | SAS SFF 8-bay Drive Cage Installation Instructions, Second Edition - - Page 4
SAS SFF 8 HP ProLiant DL785 Generation 5 概要 SAS SFF (Small Form Factor) 8 • SAS 2 7 1 2 3 4 1 - HP DL785 | SAS SFF 8-bay Drive Cage Installation Instructions, Second Edition - - Page 5
5 6. SAS SAS 7 8 9 2 10 a 2 b 2 - HP DL785 | SAS SFF 8-bay Drive Cage Installation Instructions, Second Edition - - Page 6
c SPI d 11 12 13 14 © Copyright 2008 Hewlett-Packard Development Company, L.P HP AH267-9002B 2008 年 5 月(第 1 版) *AH267-9002B* 3
SAS SFF 8-bay Drive Cage Installation Instructions
for HP ProLiant DL785 Generation 5 Servers
Overview
This document provides the procedure for installing the optional SAS Small Form Factor (SFF) 8-bay
Drive Cage.
Kit contents
•
SAS backplane
•
Power cord
•
Data Cables (two bundled)
•
Drive cage label
•
Hard drive blanks (seven)
•
This document
Installing the drive cage
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server
unless all bays are populated with either a component or a blank.
1.
Power down the server.
2.
Extend the server from the rack.
3.
Remove the access panel.
4.
Remove the blank.
1