HP Dc5750 Computer Setup (F10) Utility Guide - dc5750 Models
HP Dc5750 - Compaq Business Desktop Manual
UPC - 883585056446
View all HP Dc5750 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Dc5750 manual content summary:
- HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 1
Computer Setup (F10) Utility Guide-dc5750 Models HP Compaq Business PC - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 2
Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services are written consent of Hewlett-Packard Company. Computer Setup (F10) Utility Guide HP Compaq Business PC First Edition (October 2006) Document Part Number: - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 3
About This Book This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes. WARNING! Text set off in this manner indicates that failure to follow directions could - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 4
iv About This Book ENWW - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 5
Table of contents Computer Setup (F10) Utility Computer Setup (F10) Utilities ...1 Using Computer Setup (F10) Utilities 2 Computer Setup-File ...3 Computer Setup-Storage 4 Computer Setup-Security 7 Computer Setup-Power ...9 Computer Setup-Advanced 10 Recovering the Configuration Settings 12 - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 6
vi ENWW - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 7
restarts (warm boots) as well as during power-on. ● Establish a setup password that controls access to Computer Setup (F10) Utility and the settings described in this section. ● Secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or embedded NIC, so that they - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 8
and Exit. This option will restore the original factory system defaults. CAUTION Do NOT turn the computer power OFF while the BIOS is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen. Table - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 9
Restores the factory system configuration settings as the default. Apply Defaults and Exit Applies the currently selected default settings and clears any established passwords. Ignore Changes and Exit Exits Computer Setup without applying or saving any changes. Save Changes and Exit Saves - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 10
Support for specific Computer Setup options may vary depending on the hardware configuration. Table 3 Computer Setup-Storage Option Description Device Configuration Lists all installed BIOS-controlled drive). Hard Disk ● None (prevents BIOS data Max PIO, Enhanced DMA, Ultra DMA 0, and Max - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 11
Independent Disks (RAID) on dc5750 Business Desktops at http://www.hp.com/support. Select your country and language, select See support and troubleshooting information, enter the model number of the computer, and press Enter. In the Resources category, click Manuals (guides, supplements, addendums - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 12
MS-DOS drive lettering assignments may not apply after a non-MS-DOS operating system has started. Shortcut to Temporarily Override Boot Order To boot one time from a device other than the default device specified in Boot Order, restart the computer and press F9 when the monitor light turns green - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 13
set and enable setup (administrator) password. NOTE If the setup password is set, it is required to change Computer Setup options, flash the ROM, and make changes to certain plug and play settings under Windows. Power-On Password See the Troubleshooting Guide on the Documentation and Diagnostics - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 14
until one of the passwords is successfully provided during a subsequent cold-boot sequence. NOTE This selection will only appear when at least one drive that supports the DriveLock feature is attached to the system. OS Security (some models) See the Desktop Management Guide on the Documentation - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 15
disabled, S4 and S5 both have the LED off. S1 (no longer supported) and S3 use 1 blink per second. SATA power management enables or disables SATA bus and/or device power management. ● Fan idle mode-This bar graph controls the minimum permitted fan speed. NOTE This setting only changes the minimum - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 16
to work properly. ● Limit CPUID Maximum Value to 3. Restricts the number of CPUID functions reported by the microprocessor. Enable this feature if booting to Windows NT. Execute Memory Test Restarts the computer and executes the POST memory test. (some models) BIOS Power-On Allows you to set the - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 17
the computer in S5. ● Processor cache (enable/disable). ● Integrated Graphics Memory Size (Automatic, 32M, 64M, 128M, 256M). This allows the user to control the size of the memory used by the integrated graphics controller. Automatic allows the BIOS to choose the optimal size. Available sizes may - HP Dc5750 | Computer Setup (F10) Utility Guide - dc5750 Models - Page 18
allows the integrated graphics controller and an ATI PCI Express graphics card to work at the same time for multi-monitor support. Recovering the Configuration Settings This method of recovery requires that you first perform the Save to Removable Media command with the Computer Setup (F10) Utility
Computer Setup (F10) Utility Guide—dc5750
Models
HP Compaq Business PC