HP Designjet 10000s HP Designjet 10000 Series - Printer Maintenance
HP Designjet 10000s Manual
View all HP Designjet 10000s manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Designjet 10000s manual content summary:
- HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 1
HP Designjet 10000s Printer series Printer Maintenance Guide - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 2
Legal notices The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 3
Table of contents 1 Introduction 2 Regular maintenance guide Daily printhead maintenance ...4 Wiper blade and sponge cleaning 4 Capping unit cleaning 9 Prepare for extended power down (two to four weeks 12 Ink system storage 12 - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 4
iv ENWW - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 5
result in damage to your printer printheads and will invalidate your warranty. For further user information about the HP Designjet 10000s Printer series, please refer to the User's Guide and warranty information that came with your printer. Before starting the maintenance procedures, spend some time - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 6
Introduction 2 Chapter 1 Introduction ENWW - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 7
Regular maintenance guide 2 Regular maintenance guide The printer requires regular inspection and maintenance. The table below lists all regular inspection and maintenance ink system 6 To leave the printer in or return it from a power off state of Contact HP Support. more than four weeks ENWW 3 - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 8
in your HP Designjet 10000s Printer dries HP 790 Wiper Cleaning liquid. When the PRINTER READY message appears on the front panel, press the ONLINE key to take the printer offline. 1. Press the ONLINE key. 2. Press the SHIFT key to display the PH.MAIN menu. 4 Chapter 2 Regular maintenance guide - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 9
Regular maintenance guide 3. Press the key to enter the PH. MAIN menu and scroll to the WIPER CLEANING option using the key. 4. Press OK to select WIPER CLEANING. 5. - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 10
Regular maintenance guide 8. Dip a new HP cleaning swab (2) into the wiper cleaning liquid (1). CAUTION Make sure that you use the wiper cleaning liquid eye wash station is unavailable, flush eyes with cold water and consult a doctor if necessary. 6 Chapter 2 Regular maintenance guide ENWW - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 11
Regular maintenance guide 9. Use the HP cleaning swab (2) to clean the front and back parts of the wiper blades (1). CAUTION blades are not damaged. Clean the front and back of the blades with the HP cleaning swab moistened with the HP wiper cleaning liquid. ENWW Daily printhead maintenance 7 - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 12
printer. If the wiper cleaning liquid drips on to the belt or any nearby sensors, this could cause serious damage to the printer. Regular maintenance guide 8 Chapter 2 Regular maintenance - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 13
(1) under the belt (2) on each side. Regular maintenance guide Capping unit cleaning This cleaning procedure will remove any dried ink to the printer. Always use the safety gloves provided with the HP 790 Cap Cleaning Kit when using the HP 790 Cap Cleaning liquid. 1. Press the Online key. 2. Press - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 14
will emit an acoustic warning (beep) while the carriage is out of the capping unit. 6. Open the rear cover (1). 7. Open the cap cover (1). Regular maintenance guide 10 Chapter 2 Regular maintenance - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 15
liquid (1). CAUTION Make sure that you use the HP 790 cap cleaning liquid and not the wiper cleaning liquid a swab (1) per color and then use a new swab for the next color. Regular maintenance guide 10. Close the cap cover and rear cover. The printhead carriage will return to the capping unit - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 16
Regular maintenance guide Prepare for extended power down (two to four weeks) WARNING If the ink system storage process has to be restarted, new storage liquid cartridges will be needed (i.e. a new HP 790 Ink System Storage Kit). 1. Press the ONLINE key. 2. Press the SHIFT key to display the PH. - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 17
the waste ink bottle has been checked. 7. Follow the instructions on the printer front panel that will guide you through each step of the process. When the to SL CARTRIDGE, install or remove an HP 790 Ink System Storage Liquid Cartridge that came with your HP 790 Ink System Storage Kit. 8. Once - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 18
cleaning liquid. If the Service Clean process has to be restarted, new cleaning liquid cartridges will be needed (i.e. a new Ink HP 790 Ink System Cleaning ink bottle has been checked. 7. Follow the instructions on the printer front panel that will guide you through each step of the process. When - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 19
CL CARTRIDGE, install or remove an HP 790 Ink System Cleaning Liquid Cartridge that came with your HP 790 Ink System Cleaning Kit. 8. ONLINE key. 2. Press the SHIFT key to display the PH.MAIN menu. Regular maintenance guide 3. Press the key to select the PH. MAIN menu. 4. Select the CHARGE INK - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 20
damp cloth, clean the rear cover. 4. Using a damp cloth, absorb ink deposits on the media feed. 5. Remove dust using a vacuum cleaner. Regular maintenance guide 1. Rear cover 2. Media feed Clean the platen You should plan to clean your printer's platen on a regular basis, every few months or when - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 21
Regular maintenance guide To clean the platen: 1. Unload all media from the printer. 2. Open the rear cover. 3. Using a soft cloth, absorb ink deposits. 1. Soft cloth 2. Ink 3. Platen 4. Use a - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 22
Regular maintenance guide 5. If there are ink deposits in the vacuum holes (2) on the stained dust adheres to either it could then be transferred to the surface of the print job causing image quality problems. To clean the platen: 1. Unload all media from the printer. 2. Open the rear cover. 3. - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 23
Regular maintenance guide Replace the waste ink bottle WARNING! The HP waste ink bottle HP waste ink bottle. The bottle must be installed according to instructions or waste ink may overflow. An HP waste ink bottle must always be installed before turning the printer on. Automatic and manual service - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 24
waste ink bottle. 2. Carefully pull out the waste ink bottle (1) , taking care not to spill ink on the printer or on the floor. Regular maintenance guide 3. Seal the waste ink bottle with its cap and dispose of the filled bottle properly according to all local, state, and federal regulations. 20 - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 25
4. Lift the lever (1) and install the empty waste ink bottle (2) . Regular maintenance guide 5. Lower the lever (2) and insert the ink tube (1) into the bottle, and tighten the screw (3). Make sure the waste ink bottle is securely in position. 6. - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 26
Regular maintenance guide Normal printhead recovery 1. Press the Online key. 2. Press the Shift key to display the PH. RECOVERY menu. 3. Press the key printhead nozzles are working correctly. Perform the IQ print every day before using your printer. 22 Chapter 2 Regular maintenance guide ENWW - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 27
NOTE Use the IQ print to check that all printhead nozzles are working correctly after cap cleaning. If there are any defects in the IQ print, you can try to perform a Normal Printhead Recovery to clean the printheads. Regular maintenance guide ENWW IQ Print 23 - HP Designjet 10000s | HP Designjet 10000 Series - Printer Maintenance - Page 28
Regular maintenance guide 24 Chapter 2 Regular maintenance guide ENWW
HP Designjet 10000s Printer series
Printer Maintenance Guide