HP Designjet 4000 Service Manual - Page 134
Set SN, Enter, Cancel, System Error Code 74:00, System, Error Code 74:00
View all HP Designjet 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Service Tests and Utilities 3. Set SN The purpose of this Service Utility is to set the Serial Number of the Printer. Perform the Set SN utility as follows: 1 In the Service Utilities submenu, scroll to "Set SN" and press Enter. Press Enter 2 The Printer will display the current Serial Number and the new Serial Number of the Printer. Use the Up and Down keys to go through the digits and press the Enter key to go to the next digit. You can press the Cancel key at any time to exit the utility without making any changes. Press Enter to go to next digit Press Cancel to exit Use UP and DOWN keys to go through the digits If the Serial Number or the Part Number cannot be read, the Front Panel will display System Error Code 74:00. For more information on troubleshooting this error code, refer to Page 2-20. 3 Once the new Serial Number has been entered, the Front Panel will display the Serial Number and Model Number of the Printer. Press the Enter key to confirm the Serial Number or the Cancel key to exit the utility without making any changes or the Back key to modify again. Press Cancel to exit Press Enter to confirm 4 If the new Serial Number cannot be set, the Front Panel will display System Error Code 74:00. For more information on troubleshooting this error code, refer to Page 2-20. 5 If the utility exits correctly, OK will be displayed on the Front Panel. 4-60 hp designjet 4000 series printer service manual