HP Designjet 4000 Service Manual - Page 152
In the Paper Advance Calibration submenu, scroll to Print Calibration
View all HP Designjet 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
Service Calibrations 2 In the Paper Advance Calibration submenu, scroll to "Print Calibration Pattern" and press Enter. Press Enter 3 When the following message appears on the front panel, you must select whether you would like to continue with the calibration by pressing the Enter key. Press Back or Cancel to exit the calibration. Press Cancel or the Back key to Exit Press Enter to proceed 4 The Printer will start to calibrate the Analog Encoder and the following message will be displayed on the Front Panel. If the Calibration is not done or if the values are out of the limits, a warning message will appear on the Front Panel. In this case, try the following: Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. Retry the Paper Advance Calibration. If the problem continues, replace the Encoder Strip and Encoder Sensor ⇒ Page 8-45. 5-10 hp designjet 4000 series printer service manual