HP Designjet 4000 Service Manual - Page 41
Open the Printhead Cleaner Access Door and check that the Yellow
View all HP Designjet 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
System Error Codes System Error: 27:03 Problem Description: An error has occurred in Printhead detection. Corrective Action: Try the following: Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. Remove the Printheads from the Carriage and reinsert them. Replace the Printheads. Replace the Carriage Flex Cables ⇒ Page 8-51. System Error: 27:14 Problem Description: A wrong Printhead has been detected. Corrective Action: Try the following: Remove the Printheads and check that they are the correct ones for this Printer. Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. Replace the Printheads. System Error: 29.0:01 Problem Description: Printhead Cleaner not inserted correctly in slot 1. Corrective Action: Try the following: Open the Printhead Cleaner Access Door and check that the Yellow Printhead Cleaner is correctly seated in slot 1 of the Service Station and then close the Printhead Cleaner Access Door. Replace the Yellow Printhead Cleaner in slot 1 of the Service Station. System Error: 29.1:01 Problem Description: Printhead Cleaner not inserted correctly in slot 2. Corrective Action: Try the following: Open the Printhead Cleaner Access Door and check that the Yellow Printhead Cleaner is correctly seated in slot 2 of the Service Station and then close the Printhead Cleaner Access Door. Replace the Yellow Printhead Cleaner in slot 2 of the Service Station. hp designjet 4000 series printer service manual 2-11