HP Designjet 4000 Service Manual - Page 46
has gone before replacing another component. Using
View all HP Designjet 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
System Error Codes System Error: 52:10 Problem Description: Drop Detector switch On/Off failure. Corrective Action: Try the following: Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. Check that the Drop Detector cable is not damaged and is correctly connected to the Service Station cable. Check that the Service Station cable is not damaged and is correctly connected to the Interconnect PCA. Replace the Drop Detector ⇒ Page 8-31. Replace the Gamut PCI PCA ⇒ Page 8-69. If the System Error continues, replace the Interconnect PCA ⇒ Page 8-64. Only replace one component at a time and check if the error has gone before replacing another component. Using this procedure you will be able to determine exactly which component failed. System Error: 53:10 Problem Description: Media Sensor failure. Corrective Action: Try the following: Check that the Media Sensor cable is not damaged and is connected correctly to the Interconnect PCA. Replace the Media Sensor ⇒ Page 8-101. System Error: 54:10 Problem Description: Media Lever Sensor failure. Corrective Action: Try the following: Check that the Media Lever Sensor cable is not damaged and is connected correctly to the Interconnect PCA. Replace the Media Lever Sensor ⇒ Page 8-108. System Error: 55:10 Problem Description: Problem with the Line Sensor. Corrective Action: Try the following: Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. Replace the Line Sensor ⇒ Page 8-31. If the System Error continues, replace the Carriage PCA ⇒ Page 8-48. 2-16 hp designjet 4000 series printer service manual