HP Designjet 4000 Service Manual - Page 89
System Error, Code 81:10, Code 56:03, Enter, Cancel, System, Error Code 56:10, Code 56:10 - error when calibrating
View all HP Designjet 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
Service Tests and Utilities 8 The Printer will now check the Media Drive servo system and the following messages will be displayed on the Front Panel: Starting Paper Motor. Off/On Paper Motor. Starting Paper Axis. If there is a failure at this point, the Front Panel will display System Error Code 81:10. For more information on troubleshooting this error code, refer to Page 2-23. Calib. Analog Encoder. If there is a failure at this point, the Front Panel will display System Error Code 56:03. For more information on troubleshooting this error code, refer to Page 2-17. Once the Analog Encoder calibration is completed, the Front Panel will display the results: Acceptable values are: Gain: between 3 and 31. Offset: between 12 and 25. If the results are acceptable, press Enter. If the results are unacceptable, then press the Back/Cancel key and the Front Panel will display System Error Code 56:10. For more information on troubleshooting this error code, refer to Page 2-17. Starting Media Path. If there is a failure at this point, the Front Panel will display System Error Code 81:10. For more information on troubleshooting this error code, refer to Page 2-23. Homing and repeat. test. If there is a failure at this point, the Front Panel will display System Error Code 56:10. For more information on troubleshooting this error code, refer to Page 2-17. 9 The Printer will now check the Media Drive PWM. You must load media in to the Printer and press any key to continue the test. hp designjet 4000 series printer service manual 4-15