HP Deskjet 320 User Guide - Page 16

Load paper This section describes the procedure for loading different types and sizes of paper into the HP All-in-One for your copies or printouts. Tip To help prevent rips, wrinkles, and curled or bent edges, store all paper flat in a resealable bag. If the paper is not stored properly, extreme changes in temperature and humidity might result in curled paper that does not work well in the HP All-in-One. ● Load full-size paper ● Load 10 x 15 cm (4 x 6 inch) photo paper ● Load envelopes ● Load other types of paper Load full-size paper You can load many types of letter or A4 paper into the input tray of the HP All-in-One. To load full-size paper 1. Slide the paper-width guide to its outermost position. 2. Tap a stack of paper on a flat surface to align the edges, and then check the paper for the following: - Make sure it is free of rips, dust, wrinkles, and curled or bent edges. - Make sure all the paper in the stack is the same size and type. 3. Insert the stack of paper into the input tray with the short edge forward and the print side down. Slide the stack of paper forward until it stops. Load originals and load paper User Guide 13