HP Deskjet Ink Advantage D700 Setup Poster

HP Deskjet Ink Advantage D700 Manual

HP Deskjet Ink Advantage D700 manual content summary:

  • HP Deskjet Ink Advantage D700 | Setup Poster - Page 1
    plastic restraint Buka penutup atas. Lepaskan penahan plastik warna oranye. HP Deskjet D730 3 Close the top cover. Plug in power supply Tutup penutup atas. Tancapkan ke catu daya. 4 Turn printer on Hidupkan printer. 5 Slide paper guide to the left. Pull out extension. Load white paper Geser
  • HP Deskjet Ink Advantage D700 | Setup Poster - Page 2
    instructions. If there is no plug and play, see the Reference Guide. Windows 1 2 3 4 HP 5 HP 1 Start Run 2 Browse 3 HPPP CD Look in 4 Setup Open 5 OK Menginstal perangkat lunak printer Microsoft Corporation. Need more help? Perlu bantuan lagi? www.hp.com/support
  • 1
  • 2

1
2
3
4
5
6
7
8
9
1
2
3
1
2
*CB728-90007*
*CB728-90007*
*CB728-90007*
Windows
Macintosh
HP Deskjet D730
USB
Remove all tape.
Open top cover. Remove orange plastic restraint.
Close the top cover. Plug in power supply.
Turn printer on.
Slide paper guide to the left. Pull out extension. Load white paper.
Open top cover.
Pull pink tab to remove clear tape from print cartridges.
Insert print cartridges. Firmly push cartridges
forward until they snap into place.
Do not touch copper strip.
Insert the tri-color print cartridge on the left.
Insert the black print cartridge on the right.
Close top cover.
Connect USB cable.
Purchase a USB cable
separately if it is not included.
See step 10a.
See step 10b.
Start Here
EN
นำเทปกาวออกทั้
งหมด
เปิ
ดฝาครอบด้
านบน ถอดตั
วยึ
ดพลาสติ
กสี
ส้
มออก
ปิ
ดฝาครอบด้
านบน เสี
ยบสายไฟ
เปิ
ดเครื่
องพิ
มพ์
เลื่
อนตั
วปรั
บแนวกระดาษไปทางด้
านซ้
าย
ดึ
งถาดยื
ดออก ใส่
กระดาษขาว
เปิ
ดฝาครอบด้
านบน
ดึ
งแถบสี
ชมพู
เพื่
อนำเทปใสออกจากตลั
บหมึ
กพิ
มพ์
ใส่
ตลั
บหมึ
กพิ
มพ์
ดั
นตลั
บหมึ
กไปข้
างหน้
จนกระทั่
งมี
เสี
ยงคลิ
กเข้
าที่
อย่
าสั
มผั
สแถบทองแดง
ใส่
ตลั
บหมึ
กพิ
มพ์
สามสี
ทางด้
านซ้
าย
ใส่
ตลั
บหมึ
กพิ
มพ์
สี
ดำทางด้
านขวา
ปิ
ดฝาครอบด้
านบน
ต่
อสาย
USB
โปรดซื้
อสาย
USB
เพิ่
มเติ
มหาก
สายดั
งกล่
าวไม่
ได้
มาพร้
อมอุ
ปกรณ์
ดู
ขั้
นตอนที่
10a.
ดู
ขั้
นตอนที่
10b.
เริ่
มที่
นี่
TH
ID
Lepaskan semua pita perekat.
Buka penutup atas. Lepaskan penahan plastik warna oranye.
Tutup penutup atas. Tancapkan ke catu daya.
Hidupkan printer.
Geser penuntun kertas ke kiri. Tarik keluar perpanjangan. Muatkan kertas putih.
Buka penutup atas.
Tarik punca (tab) warna pink untuk melepaskan pita
perekat bening dari kartrid cetak.
Masukkan kartrid cetak. Dengan kuat dorong kartrid-
kartrid maju sampai mengklik di tempatnya.
Jangan sentuh setrip tembaga.
Masukkan kartrid cetak tiga warna pada sisi kiri.
Masukkan kartrid cetak hitam pada sisi kanan.
Tutup penutup atas.
Hubungkan kabel USB.
Belilah kabel USB secara
terpisah jika belum disertakan.
Lihat langkah 10a.
Lihat langkah 10b.
Mulai dari Sini