HP Disk System 2300 Power Supply Hardware Component Replacement Instructions
HP Disk System 2300 Manual
View all HP Disk System 2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Disk System 2300 manual content summary:
- HP Disk System 2300 | Power Supply Hardware Component Replacement Instructions - Page 1
hp surestore virtual arrays and disk systems power supply replacement CAUTION Parts can be damaged by electrostatic discharge. Use proper ESD protection. Two models of power supplies are available for the array: the older A6211-69001 and the newer A6211-96002. The A6211-69002 is not certified to - HP Disk System 2300 | Power Supply Hardware Component Replacement Instructions - Page 2
5 8 Pull the module from the slot. PORT 1 FC-AL 100MB/s A6214-60001 PORT 0 3 4 ADDRESS 5 LCC LINK 2 ACTIVE 6 LCC ACTIVE FC-AL 100MB/s 1 0 FAULT LINK ACTIVE PORT 1 FC-AL 100MB/s CAUTION DO NOT leave slot empty for more that 2 minutes. Push in both cam levers at the same time. 9 6
power
supply
replacement
3
4
1
2
hp
surestore
virtual arrays
and
disk systems
Manufacturing Part Number
*A6183-96103*
CAUTION
Parts can be damaged by electrostatic discharge. Use proper ESD protection.
Two models of power supplies are available for the array: the older A6211-69001 and the newer A6211-96002.
The A6211-69002 is not certified to operate with the A6211-69001 in the same array enclosure for an extended period of time.
To ensure proper array operation, the power supplies should not be mixed in the same array.
over
Copyright © 2002 Hewlett-Packard Company
Printed in U.S.A 08/02
www.hp.com/support/VA7400
Inspect the contents of the kit.
Loosen the cam lever screws with a straight blade screwdriver.
Disconnect power cord from module.
Pull out both cam levers at the same time.