HP Dl180 Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit
HP Dl180 - G6 E5504 2X2gb 4Lff Svr Manual
UPC - 883585990917
View all HP Dl180 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Dl180 manual content summary:
- HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 1
Microsoft Windows Event ID and SNMP Traps Reference Guide For use with SmartStart version 8.25 Part number: 347870-009 Ninth edition: June 2009 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP ®, Windows®, Windows NT®, and Windows Server® are U.S. registered trademarks of Microsoft Corporation. - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 3
-774 ...29 Event Identifiers 1061-1098 ...32 Event Identifiers 1101-1199 ...38 Event Identifiers 1200-1294 ...64 Event Identifiers 1343-4613 ...77 Server agents...82 Event Identifiers 256-774 ...82 Event Identifiers 1024-1092 ...85 Event Identifiers 1103-1183 ...93 Event Identifiers 1539-3352 ...124 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 4
with SNMP traps, which are generated by the HP Insight Management Agents for Servers for Windows®. Each event entry has the corresponding Message Source, Event Symptom, and Supporting SNMP Trap Data. Windows NT® event log format The following pages contain HP Insight Management events that are - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 5
: • In the United States, see the HP US service locator webpage, http://www.hp.com/service_locator. • In other locations, see the HP website, http://www.hp.com. For HP technical support: • In North America: ○ Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 6
string is: %1. The data contains the error code. Event identifier: cpqhsmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service could not allocate memory. The data contains the error code. Event identifier: cpqhsmsg.dll - 258 (Hex)0x84350102 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 7
invalid state for agent "%1". The data contains the state. Event identifier: cpqhsmsg.dll - 269 (Hex)0x8435010d (Service Event) Log Severity: Warning (2) Log Message: The Foundation Agents service could not stop agent "%1". The data contains the error code. Event identifier: cpqhsmsg.dll - 270 (Hex - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 8
Information (1) Log Message: The Foundation Agents could not find the SNMP service. Please install the SNMP service to enabled remote management of the server. Event identifier: cpqhsmsg.dll - 768 (Hex)0x84350300 (Service Event) Log Severity: Warning (2) Log Message: The Host Remote Alerter detected - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 9
code. Event identifier: cpqhsmsg.dll - 774 (Hex)0xc4350306 (Service Event) Log Severity: Error (3) Log Message: The Host Remote Specific error information is contained in the variable cpqHoSwPerfAppErrorDesc. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHoSwPerfAppErrorDesc Supporting - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 10
within the variable list are those of the alarm entry that generated this trap. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqMeAlarmVariable • cpqMeAlarmSampleType • cpqMeAlarmValue • cpqMeAlarmFallingThreshold • cpqMeAlarmOwner • cpqMeAlarmSeverity • cpqMeAlarmExtendedDescription - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 11
of the alarm entry that generated this trap. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • process has either started or stopped running. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHoSwRunningTrapDesc Supporting SNMP Trap Description: "[cpqHoSwRunningTrapDesc]" NT Event - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 12
of the cluster resource name, and then check the resource for the cause of the failure. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqClusterResourceName Supporting SNMP Trap Description: "Cluster resource [cpqClusterResourceName] has failed." NT Event ID: 1169 (Hex)0x84350491 (cpqhsmsg - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 13
SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqClusterNodeName Supporting SNMP Trap Description: "Cluster service on [cpqClusterNodeName] has failed." NT Event ID: 1173 (Hex)0x84350495 (cpqhsmsg.dll) Log Severity: Warning (2) Log Message: The Processor Performance Instance, '%4' is degraded with - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 14
SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsCpuIndex • cpqOsCpuInstance • cpqOsCpuTimePercent Supporting SNMP Trap Description: "The Processor performance Instance, [cpqOsCpuInstance] is degraded with Processor Time of [cpqOsCpuTimePercent] percent." NT Event ID: 1174 (Hex)0xc4350496 (cpqhsmsg - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 15
.MIB Symptom: The Cache CopyReadHits performance property is set to critical. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsCacheIndex • cpqOsCacheInstance • cpqOsCacheCopyReadHitsPercent Supporting SNMP Trap Description: "The Cache performance property is critical with CopyReadHits - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 16
LogicalDisk BusyTime performance property is set to degraded. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqOsLogicalDiskIndex • cpqOsLogicalDiskInstance • cpqOsLogicalDiskBusyTimePercent Supporting SNMP Trap Description: "The LogicalDisk performance instance, [cpqOsLogicalDiskInstance - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 17
Supporting SNMP Trap Description: "[cpqHoCriticalSoftwareUpdateData]" Event identifier: cpqhsmsg.dll - 1792 (Hex)0x84350700 (Service Event dll - 1800 (Hex)0x84350708 (Service Event) Log Severity: Warning (2) Log Message: Unable to read security configuration information. SNMP sets have been disabled - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 18
the registry sub-key: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 2051 (Hex)0x84350803 (Service Event) Log Severity: Warning (2) Log Message: Unable to read from the registry. This error - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 19
this error. Event identifier: cpqhsmsg.dll - 2101 (Hex)0x84350835 (Service Event) Log Severity: Warning (2) Log Message: Unable to acquire the CPU performance data. This error can be caused by a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 2304 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 20
the error code. Action: 1) Be sure that the SNMP service is configured to allow SNMP requests from "localhost". 2) Be sure that there is an adequate amount of free memory. Event identifier: cpqhsmsg.dll - 2356 (Hex)0x84350934 (Service Event) Log Severity: Warning (2) Log Message: "%1". The data - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 21
can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 3084 (Hex)0xc4350c0c (Service Event) Log Severity: Error (3) Log Message: Unable to read configuration (%1) from the registry. This error can be caused by - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 22
the registry sub-key. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 3842 (Hex)0x84350f02 (Service Event) Log Severity: Warning (2) Log Message: Could not write the registry sub-key: "%1". This - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 23
Event) Log Severity: Information (1) Log Message: Resource status is online. Event identifier: cpqhsmsg.dll - 3861 (Hex)0x44350f15 (Service Event) Log Severity: Information (1) Log Message: Resource status is offline. The resource has failed or was taken offline by a cluster administrator. Event - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 24
only supports the disk resource class. Event identifier: cpqhsmsg.dll - 3874 (Hex)0x84350f22 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry sub-key: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 25
Event) Log Severity: Warning (2) Log Message: The External Status MIB Agent could not allocate memory. The data contains the error code. Event identifier: cpqhsmsg.dll - 4353 (Hex)0x84351101 (Service Event) Log Severity: Warning (2) Log Message: The External Status MIB Agent could not open the - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 26
Complete the following steps: 1. Be sure that the SNMP service is configured to allow SNMP requests from "localhost." 2. Be sure that there is an adequate amount of free memory. Event identifier: cpqhsmsg.dll - 4405 (Hex)0x84351135 (Service Event) Log Severity: Warning (2) Log Message: The External - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 27
be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqhsmsg.dll - 4623 (Hex)0x8435120f (Service Event) Log Severity: Warning (2) Log Message: The Agent could not access WMI. The WMI support may have not been started or installed - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 28
or may still be in the starting state. Event identifier: cpqhsmsg.dll - 4626 (Hex)0x84351212 (Service Event) Log Severity: Warning (2) Log Message: The Agent failed to process the MOF file to get the data from WMI. Problem with WMI service or MOF file or wrong file paths used. Foundation agents 28 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 29
string is: %1. The data contains the error code. Event identifier: cpqstmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service could not allocate memory. The data contains the error code. Event identifier: cpqstmsg.dll - 258 (Hex)0x84350102 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 30
load the module "%1". The data contains the error code. Event identifier: cpqstmsg.dll - 265 (Hex)0x84350109 (Service Event) Log Severity: Warning (2) Log Message: The Storage Agents service could get the control function for module "%1". The data contains the error code. Event identifier: cpqstmsg - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 31
by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 526 (Hex)0x8435020e (Service Event) Log Severity: Warning (2) Log Message: Unsupported storage system. The ProLiant storage system %1 is not supported by this version of the - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 32
Agent detected an error while attempting to log an alert remotely. The data contains the error code. Event identifier: cpqstmsg.dll - 771 (Hex)0x84350303 (Service Event) Log Severity: Warning (2) Log Message: The Remote Alerter Agent was unable to log an event in the event log of the system named - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 33
of a drive array logical drive. The variable cpqDaLogDrvStatus indicates the current logical drive status. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaLogDrvStatus Supporting SNMP Trap Description: "Status is now [cpqDaLogDrvStatus]." NT Event ID: 1063 (Hex)0xc4350427 (cpqstmsg - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 34
. User Action: If the physical drive status is failed(3) or predictiveFailure(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaPhyDrvStatus • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvBusNumber • cpqDaPhyDrvBay • cpqDaPhyDrvModel • cpqDaPhyDrvFWRev • cpqDaPhyDrvSerialNum - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 35
. If data was being stored in the accelerator cache memory when the server lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrSlot • cpqDaCntlrModel • cpqDaAccelSerialNumber • cpqDaAccelTotalMemory - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 36
in the controller status of a SCSI Controller. The variable cpqScsiCntlrStatus indicates the current controller status. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqScsiCntlrStatus Supporting SNMP Trap Description: "Status is now [cpqScsiCntlrStatus]." NT Event ID: 1069 (Hex)0xc435042d - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 37
current fan status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxFanStatus Supporting SNMP Trap Description: "Storage System fan status changed to [cpqSsBoxFanStatus]." NT Event ID: 1076 (Hex)0xc4350434 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 38
by the administrator. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxTempStatus Supporting SNMP Trap Description: "Storage System temperature ok." Event identifier: cpqstmsg.dll - 1098 (Hex)0x4435044a (Service Event) Log Severity: Information (1) Log Message - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 39
air flow changes caused by the missing side panel. User Action: Replace the storage system side panel. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxSidePanelStatus Supporting SNMP Trap Description: "Side panel is removed from unit." NT Event ID: 1102 (Hex)0x4435044e (cpqstmsg.dll - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 40
to have a cleaning tape inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapePhyDrvCondition Supporting SNMP Trap Description: "Status is now [cpqTapePhyDrvCondition]." NT Event ID: 1120 (Hex)0x84350460 (cpqstmsg.dll) Log - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 41
scheduled for replacement. For detailed information on a component replacement, see the appropriate Maintenance and Service Guide. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqIdeIdentIndex Supporting SNMP Trap Description: "IDE drive [cpqIdeIdentIndex] has become degraded." NT Event - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 42
status. User Action: If the physical drive status is threshExceeded(4), predictiveFailure(5) or failed(6), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqFcaPhyDrvBusNumber • cpqFcaPhyDrvBay • cpqFcaPhyDrvStatus Storage agents 42 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 43
Action: If the spare drive status is failed, replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqFcaSpareBusNumber • cpqFcaSpareBay • cpqFcaSpareStatus Supporting SNMP Trap Description: "Spare Status is now [cpqFcaSpareStatus] on bus - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 44
. If data was being stored in the accelerator memory when the system lost power, that data has been lost. User Action: Verify that • cpqFcaAccelBoxIoSlot • cpqFcaCntlrModel • cpqFcaAccelSerialNumber • cpqFcaAccelTotalMemory Supporting SNMP Trap Description: "Accelerator lost battery power. - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 45
box has been lost. Check the storage box and all fibre channel connections for problems. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqFcaCntlrBoxIoSlot • cpqFcaCntlrStatus • cpqFcaCntlrModel • cpqFcaCntlrSerialNumber • cpqFcaAccelTotalMemory - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 46
Action: If the power supply status is failed, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsPowerSupplyBay • cpqSsPowerSupplyStatus • cpqSsPowerSupplySerialNumber • cpqSsPowerSupplyBoardRevision - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 47
as soon as possible. Be sure that the storage system environment is being cooled properly and that no components are overheated. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsTempSensorLocation • cpqSsTempSensorStatus • cpqSsTempSensorCurrentValue - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 48
Degraded. The Insight Agent has detected that an autoloader unit is in a degraded condition. • Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapeLibrarySerialNumber Supporting SNMP Trap Description: "Tape library [cpqTapeLibrarySerialNumber] is in a degraded condition." NT Event ID - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 49
Door Closed. The Insight Agent has detected that the door on an autoloader has closed. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapeLibrarySerialNumber Supporting SNMP Trap Description: "Tape library [cpqTapeLibrarySerialNumber] door closed." NT Event ID: 1161 (Hex)0xc4350489 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 50
. User Action: Check the partner controller for problems. If this was the result of a user initiated switchover, no action is required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrSlot • cpqDaCntlrPartnerSlot Supporting SNMP Trap Description: "Controller in slot [cpqDaCntlrSlot - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 51
tapes has been lost. Check the tape library and all Fibre connections for problems. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeCntlrWWN • cpqFcTapeCntlrStatus Supporting SNMP Trap Description: "Status is now [cpqFcTapeCntlrStatus] for tape controller [cpqFcTapeCntlrWWN]." NT - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 52
, check the tape and all fibre channel connections. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeCntlrWWN • cpqFcTapeDriveScsiBus • cpqFcTapeDriveScsiTarget • cpqFcTapeDriveScsiLun • cpqFcTapeDriveStatus Supporting SNMP Trap Description: "Status is now [cpqFcTapeDriveStatus] for - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 53
indicates the new active controller index. User Action: Check the partner controller for problems. If this was the result of a user initiated switchover, no action is required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime Storage agents 53 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 54
library. User Action: If the tape library is failed, check the tape library front panel. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaTapeLibraryCntlrIndex • cpqDaTapeLibraryScsiBus • cpqDaTapeLibraryScsiTarget • cpqDaTapeLibraryScsiLun • cpqDaTapeLibraryModel • cpqDaTapeLibraryFWRev - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 55
inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex Supporting SNMP Trap Description: "Cleaning is needed for the tape drive." Storage - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 56
used and therefore needs to be replaced with a new cleaning tape. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex Supporting SNMP Trap Description: "Cleaning tape needs replacing." NT Event ID - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 57
If the physical drive status is smartError(3) or failed(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqIdeAtaDiskControllerIndex • cpqIdeAtaDiskIndex • cpqIdeAtaDiskModel • cpqIdeAtaDiskFwRev • cpqIdeAtaDiskSerialNumber • cpqIdeAtaDiskStatus • cpqIdeAtaDiskChannel - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 58
status. User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsBackplaneIndex • cpqSsBackplaneVendor • cpqSsBackplaneModel • cpqSsBackplaneSerialNumber • cpqSsBackplaneFanStatus - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 59
of a tape library. The current tape library status is indicated in the cpqTapeLibraryState variable. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqTapeLibraryCntlrIndex • cpqTapeLibraryBusIndex • cpqTapeLibraryScsiIdIndex • cpqTapeLibraryLunIndex • cpqTapeLibraryName Storage agents 59 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 60
indicates the current tape status. User Action: If the tape is failed or is offline, check the tape and all connections. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeDriveCntlrIndex • cpqFcTapeDriveScsiBus • cpqFcTapeDriveScsiTarget • cpqFcTapeDriveScsiLun Storage agents 60 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 61
tape inserted and run. This causes the tape drive heads to be cleaned. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeDriveCntlrIndex • cpqFcTapeDriveScsiBus • cpqFcTapeDriveScsiTarget • cpqFcTapeDriveScsiLun • cpqFcTapeDriveModel • cpqFcTapeDriveFWRev • cpqFcTapeDriveSerialNumber - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 62
that all cables are connected properly. If the RSO status is secondaryRunningAuto(8) or secondaryRunningUser(9), examine the primary server for failed components. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsChassisName • cpqSsChassisTime • cpqSsChassisRsoStatus • cpqSsChassisIndex - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 63
door status. User Action: If the tape library door is open, close the tape library door. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqFcTapeLibraryCntlrIndex • cpqFcTapeLibraryScsiBus • cpqFcTapeLibraryScsiTarget • cpqFcTapeLibraryScsiLun • cpqFcTapeLibraryModel • cpqFcTapeLibraryFWRev - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 64
is cableProblem(4), check the cable connections between the controller and the storage system. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaCntlrIndex • cpqDaCntlrBoardStatus • cpqDaCntlrModel • cpqDaCntlrSerialNumber • cpqDaCntlrFWRev • cpqDaAccelTotalMemory - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 65
. User Action: If the physical drive status is failed(3) or predictive Failure(4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvIndex • cpqDaPhyDrvBusNumber • cpqDaPhyDrvBay • cpqDaPhyDrvModel • cpqDaPhyDrvFWRev - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 66
Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvIndex • cpqDaPhyDrvBusNumber • cpqDaPhyDrvBay • cpqDaPhyDrvModel • cpqDaPhyDrvFWRev • cpqDaPhyDrvSerialNum Supporting SNMP Trap Description: "Factory threshold passed for a physical drive." NT Event ID - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 67
If data was being stored in the accelerator cache memory when the server lost power, that data has been lost. User Action: Verify that no data has been lost. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaCntlrModel • cpqDaAccelCntlrIndex • cpqDaAccelSerialNumber - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 68
the tape library. User Action: If the tape library door is open, close the tape library door. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaTapeLibraryCntlrIndex • cpqDaTapeLibraryScsiBus • cpqDaTapeLibraryScsiTarget • cpqDaTapeLibraryScsiLun Storage agents 68 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 69
drive. User Action: If the tape is failed, check the tape and all SCSI connections. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex • cpqDaTapeDrvName • cpqDaTapeDrvFwRev - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 70
that has been fully used and therefore needs to be replaced with a new cleaning tape. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaTapeDrvCntlrIndex • cpqDaTapeDrvBusIndex • cpqDaTapeDrvScsiIdIndex • cpqDaTapeDrvLunIndex • cpqDaTapeDrvName • cpqDaTapeDrvFwRev - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 71
SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • cpqSsBoxTempStatus Supporting SNMP Trap Description: "Storage System temperature status changed to [cpqSsBoxTempStatus]." NT Event ID - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 72
: If the power supply status is degraded, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • cpqSsBoxFltTolPwrSupplyStatus - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 73
Action: If the physical drive status is failed (3) or predictiveFailure (4), replace the drive. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqDaCntlrHwLocation • cpqDaPhyDrvCntlrIndex • cpqDaPhyDrvIndex • cpqDaPhyDrvLocationString • cpqDaPhyDrvType • cpqDaPhyDrvModel • cpqDaPhyDrvFWRev - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 74
User Action: If the fan status is degraded or failed, replace any failed fans. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • cpqSsBoxFanStatus • cpqSsBoxLocationString - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 75
: If the power supply status is degraded, restore power or replace the failed power supply. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSsBoxCntlrHwLocation • cpqSsBoxCntlrIndex • cpqSsBoxBusIndex • cpqSsBoxVendor • cpqSsBoxModel • cpqSsBoxSerialNumber • cpqSsBoxFltTolPwrSupplyStatus - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 76
cpqSasPhyDrvFWRev • cpqSasPhyDrvSerialNumber • cpqSasPhyDrvSasAddress Supporting SNMP Trap Description: "Status is corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 1282 (Hex)0x84350502 (Service Event) Log Severity: Warning (2) - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 77
caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 1294 (Hex)0x8435050e (Service Event) Log Severity: Warning (2) Log Message: Unsupported storage system. The ProLiant storage system %1 is unsupported by this version - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 78
disabled. Cause: This can be cause by an invalid or missing configuration or by a corrupt registry. Reinstalling the Storage Agents may correct this problem. Event identifier: cpqstmsg.dll - 1803 (Hex)0xc435070b (Service Event) Log Severity: Error (3) Log Message: Unable to load a required library - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 79
Agent could not allocate memory. The data contains the error code. Event identifier: cpqstmsg.dll - 3585 (Hex)0x84350e01 (Service Event) Log Severity: the error code. Event identifier: cpqstmsg.dll - 3591 (Hex)0x84350e07 (Service Event) Log Severity: Warning (2) Log Message: The IDE Agent could not - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 80
the registry subkey. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 4098 (Hex)0x84351002 (Service Event) Log Severity: Warning (2) Log Message: Could not write the registry subkey: "%1". This - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 81
read the registry subkey: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqstmsg.dll - 4609 (Hex)0x84351201 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry subkey. This - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 82
string is: %1. The data contains the error code. Event identifier: cpqsvmsg.dll - 257 (Hex)0x84350101 (Service Event) Log Severity: Warning (2) Log Message: The Server Agents service could not allocate memory. The data contains the error code. Event identifier: cpqsvmsg.dll - 258 (Hex)0x84350102 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 83
not unload the module "%1". The data contains the error code. Event identifier: cpqsvmsg.dll - 272 (Hex)0x84350110 (Service Event) Log Severity: Warning (2) Log Message: The Server Agents service could not create the registry key "%1". The data contains the error code. Event identifier: cpqsvmsg.dll - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 84
code. Event identifier: cpqsvmsg.dll - 400 (Hex)0x44350190 (Service Event) Log Severity: Information (1) Log Message: The Server Agents service version %1 has started. Event identifier: cpqsvmsg.dll - 401 (Hex)0x44350191 (Service Event) Log Severity: Information (1) Log Message: %1 Event identifier - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 85
- 6047 in CPQHLTH.MIB Symptom: Advanced Memory Protection Online Spare Engaged. The Advanced Memory Protection subsystem has detected a memory fault. The Online Spare Memory has been activated. User Action: Schedule server down time to replace the faulty memory. Supporting SNMP Trap Data: • sysName - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 86
. The XOR engine has been activated. User Action: Replace the faulty memory. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The Advanced Memory Protection subsystem has engaged the XOR memory." NT Event ID: 1029 (Hex)0x44350405 (cpqsvmsg.dll) Log Severity - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 87
: cpqHe5CorrMemReplaceMemModule - 6064 in CPQHLTH.MIB Symptom: Corrected Memory Errors Detected. The errors have been corrected, but the memory module should be replaced. Value 0 for CPU means memory is not processor-based. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeResMem2BoardNum - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 88
has been installed. Value 0 for CPU means memory is not processor-based. User Action: None. SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeResMem2BoardSlotNum • cpqHeResMem2BoardCpuNum • cpqHeResMem2BoardRiserNum Supporting SNMP Trap Description: "Memory Board or Cartridge Inserted into Slot - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 89
engine has been activated. For instruction on replacing the faulty memory, see the server documentation. SNMP Trap: cpqHeResilientMemLockStepMemoryEngaged - 6068 in CPQHLTH.MIB Symptom: Advanced Memory Protection LockStep Engine Memory Engaged. The Advanced Memory Protection subsystem has detected - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 90
- 6019 in CPQHLTH.MIB Symptom: The temperature status has been set to OK. The server's temperature has returned to the normal operating range. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Temperature has returned to normal range." NT Event ID: 1085 (Hex - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 91
- 6023 in CPQHLTH.MIB Symptom: The CPU fan status has been set to failed. A processor fan is not operating normally. The server is shut down. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "CPU fan has failed. Server will be shutdown." NT Event ID: 1089 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 92
non-operational processor fans have returned to normal operation. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "CPU fan is now OK." NT Event ID: 1090 (Hex)0x44350442 (cpqsvmsg.dll) Log Severity: Information (1) Log Message: The server is operational - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 93
been set to degraded. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The server power supply status has firmware has detected unauthorized login attempts. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSm2CntlrBadLoginAttemptsThresh Supporting - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 94
OS has detected an error in the Remote Insight/ Integrated Lights-Out interface. The firmware is not responding. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Server [sysName], Remote Insight/Integrated Lights-Out interface error." NT Event ID: 1112 (Hex - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 95
passed on a particular processor, causing it to become degraded. This trap is sent when cpqSeCpuThreshPassed transitions from false to true. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSeCpuSlot • cpqSeCpuSocketNumber Supporting SNMP Trap Description: "CPU internal corrected errors - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 96
. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Firmware [cpqHeFltTolPowerSupplyFirmwareRev]." NT Event ID: 1123 (Hex)0x84350463 (cpqsvmsg.dll) Log Severity: Warning (2) Log Message: Post Errors were detected. One or more Power-On-Self-Test errors were detected during server - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 97
SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "Errors occurred during server restart." NT Event ID: 1124 (Hex)0x84350464 (cpqsvmsg.dll) Log Severity: Warning (2) Log Message: The Fault Tolerant Power Supply Sub-system is in a degraded state. - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 98
Supporting SNMP Trap Description: "The Power Supply is Failed on Chassis [cpqHeFltTolPowerSupplyChassis], Bay [cpqHeFltTolPowerSupplyBay], Status [cpqHeFltTolPowerSupplyStatus], Model [cpqHeFltTolPowerSupplyModel], Serial Num [cpqHeFltTolPowerSupplySerialNumber], Firmware CPQHLTH.MIB Server agents 98 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 99
degraded for the specified chassis and fan. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeFltTolFanChassis • cpqHeFltTolFanIndex Supporting SNMP Trap Description: "The Fan Degraded on .MIB Symptom: The Fault Tolerant Fans have lost redundancy for the specified chassis. Server agents 99 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 100
.MIB Symptom: The temperature status has been set to failed in the specified chassis and location. The system is shut down due to this condition. Supporting SNMP Trap Data: • sysName Server agents 100 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 101
has been set to OK in the specified chassis and location. The server's temperature has returned to the normal operating range. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHeTemperatureChassis • cpqHeTemperatureLocale Supporting SNMP Trap Description: "Temperature Normal on Chassis - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 102
Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHePwrConvChassis • cpqHePwrConvSlot • cpqHePwrConvSocket Supporting failed state. Replace System Information Agent: Health: The DC-DC Power Converter sub- Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqHePwrConvChassis Supporting - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 103
Action: Be sure the board and all cables are installed correctly, and that the board type and revision are the same as the replaced board. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqSiHotPlugSlotChassis Server agents 103 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 104
agent or utility has changed the name of the rack. Each of the server blades in each of the enclosure within the rack is updated to reflect the new None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackSerialNum • cpqRackTrapSequenceNum Supporting SNMP Trap - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 105
Supporting SNMP Trap Description: "The enclosure name has changed to from the rack. User Action: None. Supporting SNMP Trap Data: • sysName • • cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap into the rack. User Action: None. Supporting SNMP Trap Data: • sysName • - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 106
that air flow in the rack has not been blocked. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • and that air flow in the rack has not been blocked. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackCommonEnclosureName Server agents 106 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 107
temperature sensor has returned to normal. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName in the enclosure overheating. User Action: Replace the fan as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName Server agents 107 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 108
overheating. User Action: Replace the fan as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid OK. This trap indicates that an enclosure fan has returned to normal operation. User Action: None. Supporting SNMP Trap Data: • sysName Server agents 108 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 109
The enclosure fan has been removed. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • - 22012 in CPQRACK.MIB Symptom: The enclosure fan has been inserted. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Server agents 109 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 110
has failed. User Action: Replace the power supply as soon as possible. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackPowerSupplyEnclosureName that a power supply has degraded. User Action: Replace the power supply as soon as possible. Server agents 110 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 111
a power supply has returned to normal operation. User Action: None. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackPowerSupplyEnclosureName Warning (2) Event Title: Rack Power Supply Removed Log Message: The power supply has been removed. Server agents 111 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 112
• cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Description: "The power supply [cpqRackPowerSupplyPosition] in enclosure [cpqRackPowerSupplyEnclosureName] in rack [cpqRackName] has been inserted." NT Event ID: 1160 (Hex)0x84350488 (cpqsvmsg.dll) Log Severity: Warning (2) Server agents - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 113
Supporting SNMP Trap Description: "The rack power supply detected an input line voltage problem in power supply [cpqRackPowerSupplyPosition], enclosure [cpqRackPowerSupplyEnclosureName], rack [cpqRackName]." NT Event ID: 1162 (Hex)0x8435048a (cpqsvmsg.dll) Server - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 114
. SNMP Trap: cpqRackPowerShedAutoShutdown - 22021 in CPQRACK.MIB Symptom: Server shutdown due to power shedding. The server blade was shut down due to a lack of power. User Action: Check power connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 115
on. There is not enough power to power on the server blade. User Action: Check power connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackServerBladeEnclosureName • cpqRackServerBladePosition • cpqRackServerBladeSparePartNumber - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 116
on. There is not enough power to power on the server blade. The server enclosure micro-controller was not found. User Action: Check server enclosure connections or add power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid • cpqRackServerBladeEnclosureName - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 117
Title: Server Power On Via Manual Override Log Message: Server power on via manual override. SNMP Trap: cpqRackServerPowerOnManualOverride - 22026 in CPQRACK.MIB Symptom: Server power on via manual override. The server blade was powered on by a manual override. User Action: None. Supporting SNMP - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 118
(1) Event Title: Server Blade Inserted Log Message: The server blade has been inserted from the enclosure. SNMP Trap: cpqRackServerBladeInserted - 22029 in CPQRACK.MIB Symptom: Server blade inserted. The server blade has been inserted into the enclosure. User Action: None. Supporting SNMP Trap Data - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 119
cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Description: "Server blade [ Log Severity: Warning (2) Event Title: Power Subsystem DC Power Problem Log Message: There is a power subsystem DC power problem for this enclosure. SNMP Trap: cpqRackPowerChassisDcPowerProblem - 22031 in CPQRACK. - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 120
• cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Description: "Power subsystem DC power problem in enclosure enclosure and power supplies. Replace any failed or degraded power supplies. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqRackName • cpqRackUid Server agents 120 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 121
• cpqRackCommonEnclosureSerialNum • cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Description: "Unknown load balancing wire. Supporting SNMP Trap Data: • cpqRackCommonEnclosureTrapSequenceNum Supporting SNMP Trap Remove the extra power enclosure. Supporting SNMP Trap Data: • sysName - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 122
Title: Power Subsystem Configuration Error Log Message: The power subsystem has been improperly configured. SNMP Trap: firmware update or some other event. User action: None Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: "The Management processor - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 123
processor firmware. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags Supporting SNMP Trap Description: The Management processor to the server. User Action: None required. Supporting SNMP Trap Data: • sysName, • cpqHoTrapFlags • cpqSeUSBDeviceType • cpqSeUSBDeviceName Supporting SNMP Trap - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 124
memory condition. Rebooting the server may correct this error. Event identifier: cpqsvmsg.dll - 1540 (Hex)0xc4350604 (Service Server Agents, the software support drivers, or running the Emergency Repair procedure may correct this error. Event identifier: cpqsvmsg.dll - 1544 (Hex)0x84350608 (Service - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 125
Remote Access configuration. If this error persists, reinstalling the Server Agents or the Remote Access Service may correct registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqsvmsg.dll - 3330 (Hex)0x84350d02 (Service Event) Log Severity: Warning - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 126
registry sub-key: "%1". This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqsvmsg.dll - 3333 (Hex)0x84350d05 (Service Event) Log Severity: Warning (2) Log Message: Could not read the registry sub-key: "%1". This - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 127
Hex)0x84351604 (Service Event) Log 0x84351605 (Service Event) Hex)0x84351606 (Service Event) (Hex)0x84351607 (Service Event) Log Severity (Hex)0x84351608 (Service Event) Log Hex)0x84351609 (Service Event) Log Hex)0x8435160a (Service Event) Log (Hex)0x8435160b (Service Event) Log (Service Event) Log - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 128
identifier: cpqsvmsg.dll - 5682 (Hex)0x84351632 (Service Event) Log Severity: Warning (2) Log Message: : cpqsvmsg.dll - 5683 (Hex)0x84351633 (Service Event) Log Severity: Warning (2) Log Message identifier: cpqsvmsg.dll - 5684 (Hex)0x84351634 (Service Event) Log Severity: Warning (2) Log Message: - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 129
to read from the registry. This error can be caused by a corrupt registry or a low memory condition. Rebooting the server may correct this error. Event identifier: cpqnimsg.dll - 262 (Hex)0x84350106 (Service Event) Log Severity: Warning (2) Log Message: Could not create the registry key: "%1". This - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 130
to create thread. This error can be caused by a low memory condition. Rebooting the server may correct this error. Event identifier: cpqnimsg.dll - 271 (Hex)0x8435010f (Service Event) Log Severity: Warning (2) Log Message: Could not open the driver for device "%1". This error can be caused by an - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 131
associated with the team and re-install the drivers and team. Event identifier: cpqnimsg.dll - 274 (Hex)0x84350112 (Service Event) Log Severity: Warning (2) Log Message: The NIC Management Agent cannot generate Traps due to a communication problem with the NIC SNMP extension agent. Event identifier - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 132
Event) Log Severity: Error (3) Log Message: A driver for a NIC failed to open. This error can be caused by an improperly installed adapter. Removing and reinstalling all adapters may correct the problem. The NIC Agent service will not respond to any management requests. Event identifier: cpqnimsg - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 133
is probably not running. Starting WMI service or NIC agent might solve this problem. Event identifier: cpqnimsg.dll - 299 (Hex)0x8435012b (Service Event) Log Severity: Warning (2) Log Message: An attempt to query WMI for Virus Throttle event failed. The event data gives the error number. Event - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 134
disabled. Cause: This can be caused by an invalid or missing configuration or by a corrupt registry. Reinstalling the Insight Agents may correct this problem. Event identifier: cpqnimsg.dll - 1033 (Hex)0x44350409 (Service Event) Log Severity: Information (1) Log Message: The SNMP Insight Agent will - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 135
Remote Access Service or by a missing or invalid configuration. Use the Insight Agent control panel to verify the Asynchronous Management configuration settings. Use . If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName NIC agents 135 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 136
a logical adapter. This occurs when the physical adapter in a single adapter configuration returns to the OK condition or at least one physical adapter in a logical If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName NIC agents 136 - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 137
a faulty cable or connecting a cable that was disconnected. User Action: None required. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqNicIfPhysAdapterSlot • cpqNicIfPhysAdapterPort • cpqSiServerSystemId • cpqNicIfPhysAdapterStatus • cpqSePciSlotBoardName • cpqNicIfPhysAdapterPartNumber - HP Dl180 | Microsoft Windows Event ID and SNMP Traps Reference Guide for use wit - Page 138
to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement. Supporting SNMP Trap Data: • sysName • cpqHoTrapFlags • cpqNicIfPhysAdapterSlot • cpqNicIfPhysAdapterPort • cpqSiServerSystemId • cpqNicIfPhysAdapterStatus • cpqSePciSlotBoardName
Microsoft Windows Event ID and SNMP Traps
Reference Guide
For use with SmartStart version 8.25
Part number: 347870-009
Ninth edition: June 2009